Resume - More than ten years experience involving in Basic Design & Detailed Engineering,...

Misco Jobs

Resume #63314

CONTACT INFORMATION:
View contact information...

Country, date of birth: Indonesia, December 08, 1971
Sex: Male
Marital Status: Married

Educational: Engineer (Sepuluh November Institute of Technology, ITS, 1996 Graduate)
Course: 1. Safety course
2. Helicopter and Sea Survival Course, Malaysia, (2003)
3. H2S Competence Course, Malaysia, (2003)
Nationality: Indonesia
Lenguage: 1. Bahasa Indonesia
2. English
Computer Software: MS Office, Instrucal

EDUCATIONAL BACKGROUND

Formal Education

1981: Graduated from Elementary School
1987: Graduated from Junior High School
1990: Graduated from Senior High School
1996: Graduated from Faculty of Industrial Engineering
Engineering Physics Field – Instrumentation Engineering Subject
Sepuluh November Institute of Technology, Indonesia

EMPLOYMENT RECORD

July' 02 – July' 07: Sime Darby Engineering Sdn Bhd, Fabricator, Malaysia

1. B 11P-A Production Topsides (10,000 MT) Fabrication & Offshore Hook Up
Period: July'02 – May '03 ( 11 months in engineering and fabrication)
Position: Instrument Lead Engineer
Client: Sarawak Shell Berhard (SSB)

Project brief:

To produce dehydrated gas and condensate prior to exporting via B 11DR-A to E 11R-BA, the B 11 Complex has been designed as a Not Normally manned (NNM) complex and being designed for SIPROD (simultaneous production and drilling operation) with sour (H2S) service facilities and to handle 2 x 600 MMSFD dehydrated gas. For gas dehydration, two units twister are installed to replace the conventional glycol system. This platform is first platform operated Twister to dehydrate gas in the world. The overall complex instrumentation system comprises a Yokogawa Distributed Control and Computer Assisted Operation System (DCS-CAO) to handle more than 850 I/Os and to be supported by 17 RIOS. The safety system comprises an Instrumented Protective System (IPS) to handle more than 550 I/Os, a Fire and Gas System (FGS) to handle more than 700 I/Os

2. CNR BAOBAB IVOIRIEN (MV 10) FPSO Topsides (19 Modules) Fabrication
Period: June '03 – Jan '04 (8 months in fabrication)
Position: Instrument Lead Engineer
Client: MODEC International LLC

Project brief:

West Africa FPSO was owned by CNR International and to have rated capacity 70000 bopd, 75 MMscfd gas, 70000 bwd, 10000 bwd, (for sea water injection). This FPSO have 7 modules for pipe rack, Production separation module, IP Separation Module, Oil Treating module, Utility module, Power Generation module, Booster Gas Compression Module, Water Injection Module, Dehydration Module, E-House, Flare System module and Lay down Module.

3. Guntong – E Topsides (12,500 MT) Fabrication & Offshore Hook Up
Period: Feb '04 – Aug '05 ( 12 months in fabrication, 8 months Offshore Hook Up and Commisioning)
Position: Instrument Engineer
Client: Exxon Mobil Exploration and Production Malaysia Inc. (EMEPMI)

Project brief:

Guntong E is a compression platform designed to process and compress non-associated gas from, Gu-A, Gu-B, Gu-C, GuD-C, Tapis, Tabu, Telok and Bindu, to handle 540 MSCFD of gas, 30 KBD of hydrocarbon liquids and 15KBD of produced water. The main equipments are 3 x 22 MW Rolls Royce Turbo-Compressor for gas compression, 3 x 2.7 MW of Solar Turbo-Generator for power generation and Glycol Gas Dehydration System capacity of 540 MSCFD to meet sales gas specification of 6 lb/MSCF. The overall complex instrumentation system comprises a Honeywell Distributed Control and Computer Assisted Operation System (DCS-CAO) to handle more than 846 I/Os. The safety system comprises an Instrumented Protective System (IPS) to handle more than 516 I/Os, a Fire and Gas System (FGS) to handle more than 746 I/Os and Gai Tronics Intra-Platform Alarm and Communication System (GPA/PAPA). The field data from field instruments are transferred to Controller via hardwire system. Inter module communication system to be handled by fiber optics.

4. SUDP-A Drilling Topside (2000 MT) (EPCC Project)
Period: Sept '05 – Aug '06 ( 14 months in engineering and fabrication)
Position: Instrument Lead Engineer
Client: Petronas Carigali Sdn Bhd (PCSB)

Project brief:

SUDP-A platform will be 2000 MT topside which can accommodate up to 28 conductor slots, unmanned with PMCS and Independent SIS/FGS system. The PMCS will be a Hybrid system and consist of a unified DCS with Foundation Fieldbus (FF) capability with associated equipment and utilizing industry standard hardware and software connectivity, integrates plant control and monitoring functionality with sequence logic capabilities and easy to use object based graphical user interface. SUDP-A will be supported by 179 nos of FF equipments, 4 nos of RIOS, 118 I/Os for FGS system and 632 I/Os for SIS system.

5. SUPG-B Central Production Platform (7,5000 MT) (CPP) (EPCC Project)
Period: Augt '06 – Sept '07 ( 14 months in engineering and fabrication)
Position: Instrument Lead Engineer
Client: Petronas Carigali Sdn Bhd (PCSB)

Project brief:

Sumandak Selatan Platform (SUPG-B) is designed and to be developed as an Integrated Central Processing Platform, which will accommodate 18-slot drilling facilities, oil and gas processing facilities and water injection facilities in modular arrangement. It is to be developed as a remote platform to Samarang field with normally unmanned facilities as well as with capability for remote operation.
The PMCS shall be a Hybrid system and consists of a unified Distributed Control System (DCS) with Foundation Fieldbus capability and associated equipment and utilising industry standard hardware and software connectivity, integrates PMCS Plant control and monitoring functionality with sequence logic capabilities and easy to use object based graphical user interface. This will reduce the hook up work offshore and to reduce the problems of cable and panel congestion including multiples segregation.As much as possible the third party interfaces with other systems shall utilize Ethernet MODBUS TCP/IP or serial RS485 MODBUS. SUPG-B will be supported by 313 nos of FF equipments, 412 I/Os for FGS system and 751 I/Os for SIS system.

Responsibilities:

* To monitor and ensure that any drawing generated by the design work output is properly established to reflect all the required design detail.
* To plan, organize and co-ordinate the disciplinary MTO to meet specification within schedule for quality output.
* To manage and monitor issuance of construction drawings based on master planning package.
* To prepare weekly progress report and take apart on weekly progress meeting.
* To clarify and ensure the engineering design documents (specification, data sheet, hook up drawing, layout drawing, etc) are constructible and maintainable.
* To review and check the shop and fabrication drawings once the drawings issued.
* To perform the technical evaluation or any tender document submitted by Vendor.
* To clarify vendor quotation technically and to take apart in kick of meeting under procurement section co-ordination.
* To coordinate with Client's representative in instrumentation, suppliers and sub-contractor regarding work on the related equipments, material and manpower.
* To coordinate with procurement in vendor quotation technical evaluation, verification, review and approve the vendor drawings.
* To monitor and control instrument material status.
* To coordinate with other discipline engineers, superintendents, supervisors, etc on interdisciplinary matters and to communicate projects details between all members of the interdisciplinary team as required to assure continuity and integrity of design and construction
* To liaise with Material Controller in material inspection and material ship loose preparation.
* To liaise with Structural discipline in weight control report (WCR) preparation and checking.
* Perform the site technical query (STQ) to propose design change or material change to client due to any discrepancies between design and actual condition.
* To liaise with Project Management Team and Client on all engineering matters.
* To do site verification and prepare modification drawings if required.
* To visit the scope of work and the related contract documents to prepare the construction work packages.
* During hook up stage, my duties are to coordinate the offshore jobs, to monitor and update the daily progress, prepare the daily progress report.
* To involve in the daily progress meeting and safety meeting with client's team and monitor the material status through material tracking list.
* To prepare all necessary check sheet and test report for all related materials and equipments.
* To solve the technical problem and perform the site modification.
* To review as built drawings.
* Fully assist commissioning team during in troubleshooting during offshore hook up and commissioning.

July' 01 – Jun' 02: PT TRIPATRA (Engineers and Constructors), Jakarta, Indonesia

Position: Instrument Lead Engineer

Client: Unocal Indonesia Company (UIC).

Project:

1. Serang FA Platform Expansion Module.(Detail design)
2. Attaka F Platform Gas Engine Replacemen (Detail design)
3. Sapi Drilling Platform (Front End Engineering Design).

Responsibilities: In co-ordination and control instrument work activities, including,

* To provide special expertise to supplement the UIC project technical staff diversified knowledge of engineering principles and practices to project engineering, support execute and complete the engineering design of UIC project.
* To represent the discipline on the UIC project and resolve technical questions and co-ordinate work.
* To supervise and provide technical guidance to subordinate engineers.
* In co-ordination with the Project Engineer supervise the assigned Engineers and Designers.
* To prepare discipline detailed planning and schedule and report to Project Engineer.
* To verify the design within the discipline in accordance with Engineering Procedure to substantiate the design, taking the importance in safety, complexity, degree of standardization, state of art and similarity to the previously proven design, assumption, etc.
* To squad check of other discipline document which relating to instrument standard requirement.
* Performing Instrument system design and analysis.

Jan' 97 – Feb' 01: PT. Inti Karya Persada Tehnik (IKPT), Engineers and Constructors, Jakarta, Indonesia

Position: Instrument Engineer

Client: PT Badak NGL Co.

1. Bontang LNG Reliability Enhancement Project. Train A-D DCS Retrofit & Instrument Upgrade, Train A-F ESD/EDP System Upgrade, Train A/F Fire Water Deluge System Upgrade in East Kalimantan, Indonesia.

Responsibilities

* In co-ordination Instrument Site Survey.
* To co-ordinate field engineering, in modification of existing Instrument system (develop existing P & I Diagram, Instrument Location Plan, Instrument Wiring Layout, Instrument Wiring Diagram, Instrument Connection List, Instrument Cable Schedule, Installation Standard and Instrument Material Take Over.
* To co-ordinate and supervise the installation, inspection and testing.

2. Bontang Train H (EPCC Projec)t, East Kalimantan, Indonesia.

Responsibilities:

* Involved in Detail Engineering for preparation, review and checking Instrument Index, Field Instrument Specification, Data Sheet, Vendor Document associates and Factory Acceptance Test.
* To provide technical assistant and supervise the field Instruments calibration, inspection, testing, loop and functional test in construction stage.
* Involved in commissioning and start up.
* In co-ordination and preparation of take over Loop test documents and daily progress report to Client.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 5101 to 5150 of 15341)

Go to Search Parameters...

Brief Description

Project Engineering, Project Management, Mechanical Engineering, Piping Engineering

Experience in the Power, Water and Wastewater automation and process control. Designing and developing automation solutions for PLC/ SCADA systems. Project management of automation and Telemetry projects. Leading role in design, engineering, testing and commissioning

19 years process background in varied complex plants. Success gained in expatriate, residential and remote work environments. Utilised strong leadership ideals and practices to promote and empower subordinates and effected communication to all levels of management.

8 years experience as a Drilling Engineer, Drilling Supervisor, Directional Driller & Well Performance Engineer(Onshore & Offshore).

Mechanical Commissioning & Maintenance, Maintenance Planning Scheduling

1.Accurately process and record all technical documentation in accordance with agreed procedures. 2.Input progress mark-up information into Document Management System (DMS). 3.Receive, check accurately record into DMS system and distribute all project technical drawings and documentation

Extensie background in instrumentation and analyzers. Lots of CEMS experience.

Fourteen years Welding/Materials/NDE experience in fossil power industry, oil&gas industry, engineering, fabrication and construction

Currently Sr. piping designer on Bentley 3d and piping design checker. Experienced in all areas of piping Including high temperature and high pressure piping systems, lined and jacketed pipe, stress analysis, p&id’s, specifications, process, utilities, sulfonation, pharmaceutical, pharmaceutical val

Procurement Professional with over 15 Years Oil and Gas Industry Experience whose Strengths and Skills Saved Millions of Dollars.

Corrosion /Pipeline engineer with 5 years experience

Instrumentation/control/Automation/PLC programming/Robot programming

piping engineer with 5 yrs exp. in piping detail engineering with pdms as a 3D piping software, and PDMS administrator

IT Support/ personnel

Total 5 years engineering experience and new graduate from managment school.

I'm an Electromechanical Engineer with 5 years of related experience within the UAE and GCC.

Technician Komatsu Heavy Duty Machinery

Drilling standard directional, horizontal, “S” (build and drop), and build and hold wells for Shell Petroleum, Saudi Aramco, Encana, ConocoPhillips, EOG, Petrobras, Agip, Mobil, Elf, Chevron etc., with MWD/LWD tools and mud motors.

Involved in Sales Support, System Design & Estimation, Tendering & Engineering Low Voltage / Low Current Systems, including Fire Alarm System, SMATV Systems, Intercom Systems, Security Systems, Automatic Gate Barriers / Swing Gates, etc,.

Marketing,Business Development & Application Specialist of Chromatographic instruments of Pharmaceutical industry.

Mechanical Engineer with over 15 years of technical business experience with emphasis in cost control projects.

Ability to manage multiple tasks in a pressured environment.

I am hvac engineer

12th standard,iti-electrical,1year -diploma-electrical,maitenance,comissioning-crane,mcc panel

slick line supervisor

Working as a Petrophysicist( Logging Opertaion and Interpretation) in RIL India from last 2 years.

An Industrial Engineer working for five years as a Document Controller. A fast learner and once awarded as best employee.

Detailed Engineering for Offshore Plant, Hysys Simulation, Pipe line sizing, safety Valve Sizing, Equipment Sizing

Petroleum geology, well log interpretation, data management, seismic interpretation.Also I am a quick learner, hard working and can handle stress and give you desired results within a deadline.

Senior IT Analyst / Engineer

05 Years experienced HSE Advsior with NEBOSH

11 years extensive experience in engineering and design of all piping system and the overall layout of a plant for both on- and off shore project in the field of oil, gas and petrochemical plants, including plot plan development, plant and piping layout study, equipment arrangement, 3D modeling,

Having over 4 years experience as QC Engineer in various oil & gas indusries like, petrochemical refinery, ship building, offshore wellhead platform construction etc. I have a good background welding & Having ASNT Level 2 in RT, UT, MT & PT

Water/wastewater treatment engineering study, design, modeling, operation optimization for municipalities,oil &gas, refinery,power and petrochemical plants.

Geologist with a very strong experience in most of the oil/gas drilling operations

- Highly educated professional (Ph.D. and M.Sc. in Environmental Geosciences) - Managed portfolio of several environmental projects (NSERC, DIAND, CIDA, ICEF) - Seven years of professional experience in characterization, assessment and monitoring of contaminated sites

3 years in Human resource, 8 years in administration, 3 years in public relation / cutomer service

Electrical Technician Electrical instructor

Qaulity Engineer, ISO 9001. ISO TS16949, Supplier Quality Engineer

Experience in a range of commodity types: VHMS, intrusion-related-, meso- & epithermal-Au and porphyry Cu-Au and Mo style deposits. (Australia, Turkey, Albania, Kyrgyzstan Saudi Arabia & Oman). Reviewed, designed, budgeted & implemented regional & mine-based exploration programmes

More than ten years experience involving in Basic Design & Detailed Engineering, Construction and commissioning in Oil & Gas field. Extensive experience in all phases of Instrumentation Engineering starting from Feasibility Study, Basic Engineering Design Data, Design & Detail Engineering, Construct

Quick learner, motivated and dedicated in getting the job done .

Tertiary qualification in Mineral Processing and Extractive Metallurgy, Good understanding in Met accounting, Good troubleshooting, strong analytical and conceptual thinking skills, Initiative, Team player and hands on the job training, Strong commitment to Training, Safety and the Environment

B.E., (Bachelor in Industrial Engineering from Indian Institution of Industrial Engineering),

B. Sc. Chemistry (Grade Good)

Applying Insulation and Sheet metal Cladding.

Business development specialist with Sales experience

As Storekeeper we serve as the sole staff member responsible for performing all record keeping, issuance, recieving of a large supply materials and responsible for a large function of the storerooms

1st class welder fitter i have six full years expierience in this field

Experience Surveyor

First Prev 101 102 [ 103 ] 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 Next Last

Seach Parameters


Goto Advanced Search...
Keywords: (e.g. mining engineer)		Find results with:

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out