Resume - 29 years experience in Quantity Surveying, Commercial and Contracts Management i...

Misco Jobs

Resume #6354

CONTACT INFORMATION:
View contact information...

CURRICULUM VITAE

D.O.B.: 8 November 1954

NATIONALITY: British

MARITAL STATUS: Married – 4 Daughters, 1 Son

BRIEF RESUME OF EXPERIENCE

PRE CONTRACT: Drafting contract terms & conditions, preparation of multi-discipline Bills of Quantities for fabrication of offshore structures, invitation to tender, tender evaluation, negotiation & recommendation to senior management and co-venturers. Assisting in development of contracting strategies. Preparation of budgets and cash-flow forecasts on multi-million pound projects.

POST CONTRACT: All aspects of post-contract administration for Client and Contractor on various contract bases including Measure & Value, Cost plus Target Fee, Alliance and EPIC Lump Sum contracts for multi/discipline construction on Power Stations (Oil & Nuclear), Oil & Gas Terminals, Gas Compressor Stations, Fabric Maintenance, Jackets, Topside Module & Subsea structures fabrication, concrete Gravity Base Structure, Rig Conversion FPSO and Subsea Pipeline Projects. Supervision and co-ordination of Commercial department. Preparation of contractual correspondence, minutes of meetings, and preparation & evaluation of claims. Internal and external reporting, including reporting to development partners. Sub-contract preparation, negotiation & Administration. Negotiation and agreement of final accounts. Deputising for Site Manager. Preparation of insurance Claims.

COMPUTERS: Computer literate with a good working knowledge of Microsoft Office and Lotus Smartsuite software packages. Attended Hess S.A.P. training.

POSITIONS HELD: Project Quantity Surveyor
Senior Contracts Engineer/Administrator
Contracts Supervisor
Commercial Manager

DETAILS OF PROJECTS

February 2003 until Present

Employer: Working contract basis for Noble Drilling (UK) Ltd (Managing Contractor)
Project: BP Clair Phase 1 Drilling Facilities
Location: Hartlepool
Position: Construction Contracts Advisor

Upon the satisfactory completion and close out of the Juno facilities fabrication contract, I took up the position of Contracts Advisor to Noble Drilling on the contract for the fabrication of the Clair Phase 1 Drilling Facilities. I was the sole contracts and commercial representative for BP's Project Management Contractor (Noble Drilling) on the Clair drilling facilities fabrication site and was responsible for all post contract commercial activities including contractual correspondence, processing interim payments, review of contractor's claims and subsequent recommendation to management of proposed methods of resolution.

May 2001 until February 2003

Employer: Working contract basis for Amerada Hess Ltd
Project: Various pre-development works and assignment to BG Juno Project
Location: London/Paddington/Hartlepool/Reading
Position: Senior Procurement Advisor/Senior Contracts Engineer

Returned to Amerada Hess following concerns at the long term future of Aker McNulty. Initially involved in pre-development work, prior to being assigned to the Juno Project, which was a joint development between BG, BP and Amerada Hess. Responsible for all post contract administration of the EPCI contract for the supply of the Minerva hub platform, which consisted of a small jacket and topsides for a normally unmanned installation. Hook up contract negotiation and administration. Part time involvement in Atlantic & Cromarty pre-development activities, including preparation of pipeline EPIC ITT documents, but Project was temporarily shelved.

November 1999 until May 2001

Employer: Aker McNulty Limited
Project: Corporate Position
Location: Aker McNulty Facility in South Shields
Position: Commercial Manager

Reporting directly to the Managing Director on all commercial activities. Responsible for the supervision and management of the Commercial Department. Advising project management on commercial and contractual issues arising throughout the duration of all projects in the yard. Preparation of departmental budgets. Advising Business Development and Tendering Department on risks and exposures from proposed contract terms for work to be tendered. Participation in risk assessments and risk analyses.

March 1997 until November 1999

Employer: Working contract basis for Amerada Hess a.s. (Client)
Project: South Arne Field Development
Location: London/Leatherhead/Barmac Ardersier/AH Copenhagen
Position: Contracts Supervisor

Recommenced with Hess one week before receipt of bids for the South Arne Development. Involved in bid receipt, clarifications, evaluation, through recommendation to award. Following award of contract I was assigned to play a key role in the small project management team. My position was contracts supervisor, based initially in the design house in Leatherhead, following through fabrication at Ardersier and Nigg, hook up phase in Amerada Hess a.s. offices in Copenhagen, returning to London to complete the final account. Responsibilities included all contractual and commercial post-contract administration activities together with recommendation of claims settlements to senior management.

November 1994 until March 1997

Employer: Rust Resources Ltd., seconded to Phillips Petroleum Co. Norway (Client)
Project: Ekofisk II Development
Location: PPCoN Project Office Tananger, Norway
Position: Senior Contracts Specialist

Responsible for the preparation of a number of Invitation to Tender packages for various multi-million pound contracts for the Ekofisk II Development. Sole commercial representative throughout clarification, negotiation and recommendation to award phase, including presentation of recommendations to development partners, for the following key contracts:

¨ Pipelines Engineering
¨ Pipelay
¨ Pipeline Isolation, Pigging and Testing
¨ Process Deck Installation
¨ Process Deck Hook-up
¨ Pipeline Tie-ins
¨ Rockdumping

Prepared and developed an umbrella bonus agreement encompassing all key contractors to ensure a full buy-in to timely completion, from key contractors.

March 1994 until November 1994

Employer: Working through NAP for Trafalgar House Offshore Services (Contractor)
Project: BP Southern North Sea Offshore Maintenance Alliance
Location: BP Dimlington, North Humberside
Position: Senior Cost Engineer

Responsible for the preparation and development of budget estimates for offshore maintenance packages of work. Measure and value of completed work packages and monthly cost reporting using Artemis 7000.

February 1994

Employer: Short term assignment through Rider Hunt International
Project: Shell Troll Development, Norway
Location: Stord/Sandsli, Bergen
Position: Consultant Construction Cost Specialist

Short term assignment entailing a verification check on the pre-commissioning and commissioning budgets for the Shell Troll Project. Detailed review of fabrication norms.

From March 1990 until December 1993

Employer: Working contract basis for Amerada Hess Ltd. (Client)
Project: Scott Field Development
Location: London/SLP Teesside/McNulty Tyneside/Aberdeen
Position: Senior Contracts Engineer/Administrator

Responsible for all pre-contract administration on the fabrication of the Scott Field drilling modules, including redrafting of contract terms & conditions, preparation of schedules of rates, invitation to tender, evaluation, negotiation and recommendation to senior management and development co-venturers. Preparation of budget forecast for all Scott Module sites.

Also responsible for all post-contract administration and cost reporting on the drilling modules site including supervision of measurement team, contractual correspondence, minutes of meetings, review and agreement of variations and claims, approval of star rates, processing of monthly payment applications, and early agreement of final account within budget.

Deputising for Site Manager during holiday absence period.

Concurrent with the above workload further responsibilities included all post-contract administration and cost reporting on the Scott subsea structures fabrication, the Scott gas treatment module fabrication, and the Scott flare boom fabrication of which were being built concurrently in the North East of England. All final accounts came to a satisfactory conclusion with early agreement, and all within budget.

Tasked with the role of Site Manager for final few months of the drilling modules contract, upon redeployment of the Site manager to the hook up base, before returning to London where responsibilities included preparation of insurance claims and finalising close out of other major fabrication contracts.

Located to the Aberdeen office to finalise insurance claims and the close out of minor contracts.

From August 1989 until March 1990

Employer: Working contract basis for BP Ltd. (Client)
Projects: BP Miller
Location: AMEC Tyneside (Process & Utilities modules)
Position: Senior QS

Responsible for the preparation and agreement of measurements of pipework fabrication and installation. Preparation of cost forecasts by projections based on available information.

From December 1986 until August 1989

Employer: Working contract basis for Amerada Hess Ltd. (Client)
Projects: Ivanhoe & Robroy Development
Location: London/HiFab/Charlton Leslie (McNulty Quay)
Position: Cost & Contracts Engineer

Initially based in London where responsibilities included the preparation of estimated bills of quantities for conversion work on the Sedco Phillips SS.

Mobilised to site at Highlands Fabricators where responsibilities included all post-contract administration and cost reporting. Responsible for closing out site as Site Manager was relocated to main conversion site at Tyneside. Negotiated and agreed final account which was settled within budget.

Transferred to main conversion site where responsibilities included preparation of contractual correspondence, attending and recording minutes of meetings, supervision and guidance of site measurement team, monthly cost reporting, and deputising for Senior Contracts Engineer as necessary.

From October 1994 until December 1986

Employer: Howard Doris Ltd. (Contractor)
Projects: BP Buchan Alpha Gas Lift Installation (Client BP)
Total North Alwyn B Modules PO1 & PO4 (Client Total)
Southern Basin Gas Development (Client Conoco)
Location: Loch Kishorn/Tyneside
Position: Project QS/Deputy Commercial Manager

Responsible for the measurement of fabrication work on the installation of a gas lift facility including the supervision of two measurement QS's identification of variations, drafting correspondence, internal cost reporting & Cash flow projections, sub-contract administration and preparation of claims for delay and disruption.

Assisted with measurement and internal reporting on contract for North Alwyn B until transferred to Tyneside on Southern Basin Gas Development project.

Took up position as QS/Deputy Commercial Manager responsible for the preparation of deparmental budgets, cash flow forecasts, preparation of commercial procedures, and all aspects of contract administration on six jackets for the Conoco operated V Fields.

Duties included subcontract negotiation and administration.

From March 1982 until October 1984

Employer: Laing I E & C Ltd.
Projects: BP Forties Fabric Maintenance (Client BP)
SIXEP Extension Sellafield (Client BNFL)
Rough Onshore Gas Terminal, (Client British Gas)
Location: BP Forties (offshore)/Sellafield/Easington
Position: Deputy Project QS

Responsible for all aspects of post contract administration on a fortnightly offshore rota with Project QS, including measurement of the work, identifying, negotiating and agreeing variations, subcontract administration, internal reporting, and monthly valuations.

Transferred to Sellafield Nuclear Power Station on completion of offshore final account. Duties at Sellafield included measurement of pipework and pipe supports and preparation of Bills of Quantities for subcontract work.

Transferred to a new project at Easington. Fully responsible for total re-measurement of the work including identification and negotiation of variations, assisting Project QS with internal reporting and preparation of claims for extension of time.

From November 1975 until March 1982

Employer: George Wimpey M E & C Ltd.
Projects: Bathgate Compressor Station (Client British Gas)
BP Refinery Grangemouth Power station Extension
Sullom Voe Oil Terminal (Client BP Pet. Dev.)
Location: Bathgate/Grangemouth/Shetland
Position: Junior QS/Quantity Surveyor/Cost Engineer

Commenced employment in the petrochem industry as Junior QS at Bathgate Compressor Station where duties included measurement of E & I work and preparation of daywork sheets for Clients approval.

Transferred to BP Power Station extension where duties include re-measurement of the work and variations, as well subcontract administration.

Progressed to position of Cost Engineer for a two year assignment at Sullom Voe Oil Terminal where responsibilities included re-measurement of all offsite facilities, cost projections, monitoring & reporting.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 6251 to 6300 of 15512)

Go to Search Parameters...

Brief Description

Diploma Instrumentation, B. Tech Electronics(Appeared) , Skill in Automation Technologhy. Experties in Simens System, step7 , PCS7

5 years cad customisation autolisp, visual lisp, vb.net, structural design software development, connection design

Handle all Process oil and gas

I am seeking a Well Site Geologist/Mudlogging position with a quality, client service oriented company. I have worked in Environmental Consulting and Mudlogging/Well Site Geology. My oilfield experience is in Utah, primarily in the Uintah Basin, and also in Colorado, New Mexico, Wyoming, and Texas.

Instrumentation Design Engineer with 5 years experience in Petrolium,Oil&Gas,Fertilizer EPC projects. Knowledge of INtools,AutoCAD,Instrucal,PDMS,Flowel,conval. Knowledge of instrument specifications,loop drawings,JB schedule,INdex,I/O list,Technical Recommandations,Hookup,BOM,wiring

COMPUTER LITERATE MS Excel .MS Word. MS Power Point, (CMMS) Main Saver : JDE Edwards and Maximo & Electrical & Instrument Technician

B.Tech mechanical Mechanical Sr. Sales Executive in Leading MNC.

• Knowledge in Geochemistry, Geophysics, Well Logging, Oil Phase, Structure Drilling, and Direction Drilling and Economic Geology, mud operation ,oil gas analysis ,3D interpretation , Well testing operation.

I have been actively involved in the world of mapping for more than a decade and I take great pride in the art of mapping from start to finish. In every job that i oversee it is my goal to achieve the highest level of accuracy to provide the best possible data.

Skilled Production Technician

Hotel&Resteraunt Management Certification Thomson Education Direct

Technical Sales manager - Electrical Engineering

Caterpillar field service engineer

Reliability, maintainability & logistics, welding inspector, Mechanical engineer

Objective: Joining Challenge job in a progressive organization in which I can be best utilized and developed according to my abilities and performance efficiency.

DETAIL qa / q WORK IN PIPING

To become an asset to your Organization using my Technical, Communicative and Managerial skills to increase Productivity with a schematized mode of Safe, Reliable operation.

Construction Superintendent

Offshore Maintenance Supervisor FPSO Experience, Heavy Oil Experience

Piping Designer, MicroStation, Power (Nuclear, Fossil, etc.), Petrochemical, Chemical, Heavy Industrial.

Industrial Maintenance Electrician 442A, Industrial Electrician, Instrumentation and Control Technician 447A, Instrument Mechanic, Electronic Technologist, Electrical Maintenance Technician

Construction Laborer Expert 0-2 years Customer Service Face-to-Face Support Expert 10+ years Engineering Applications / Technical Support Strong 5-10 years Engineering Electrical Strong 5-10 years Engineering Field Service Expert 10+ years Engineering Maintenance Expert 5-10 years

I am mechanical engineer having 17 years of experience in oil and gas construction industry both onshore and offshore. Currently located in Tunisia with petrofac for their onshore gas development project. I am well familiar in all standards and codes applicable for industry,

To participate in periodical inspection and testing of all static equipment of process plants and pipelines to analyse the condition of the equipment.

Executive Mechanical at Megasteel Sdn Bhd under repair and maintenance, As Mechanical Engineer at Stagno Tech Sdn Bhd aslo under repair and maintenance Banting, Selangor

Health & Safety Professional, Post Grdadute Diploma, Various HSE Courses & Certifications Completed.

Accounts upto finalisation,Tally 7.2, MS Office ,Administration& Logistic , B Com

Senior Inspector, CSWIP 3,2 + RAD. Interpretation

I am a mining engineer and I do work in South Africa for the past 11 years also I do have a MSc degree in mining engineering and more than 10 years experience in underground mining (gold and diamonds), and currently working for De Beers for the last 5 years

Exposed in several construction company involved in Engineering Procurement Installation Commissioning and Build Operate Transfer type of Contract at Oil & Gas, Petrochemical and Power Plants. In addition to that I’ve been in the Operation and Maintenance a couple of years at the Refinery and Petroc

47 years old. 30 of those years have been in the oilfield all over the world, currently consulting, but have been drilling superinentant, tool pusher, and on down. have worked my way up from the bottom. i am looking for a drilling superientants job now

Extensive hands-on experience in construction project administration & accounting

15 years expeirence in operations geology (oil and gas)

Holds an NVQ Level 3 in complex Processes, also City & Guilds in process plant operations. Studying for a number of City & Guilds in Oil and Gas process Separations.

PROFILE Highly motivated, technically minded team player with proven managerial skills, and various nuclear, engineering and power plant testing experience – in locations worldwide.

I am very keen to work in the offshore oil industry. I have been thinking about it since some years ago, so that idea is already very mature. I am willing to start at the bottom. Therefore, I am looking for a job as a Roustabout.

Over 40 Years Quantity Surveying/Cost Estimating experience on projects in Ireland, England, Australia, Greece, Middle East and the USA. Largest project: Headed the US office working on King Khalid Military City , North Eastern Saudi Arabia ($6 Billion for the US Army Corps of Engineers)

Self-motivated & hard-working Drilling Superintendent / Company Man with a vast experience spread over 29 years in well reputed National & International E&P Companies.

Over 25 yrs experience in Drilling industry, ten at toolpusher level and last seven at senior tool pusher level. Mostly offshore on semi-subs,jack-ups and drillships.

Melbourne, Australia Logistics Professional Have worked in many countries around the globe Extensive global knowledge of general freight movement, heavy lift and transportation requirements. Heavy shipping & barging, including barge landings.

Construction Manager/Superintendent in Design Build

20 years overseas experience

I am currently looking for a construction assignement overseas, in the fields of instrumentation or building management systems.

Certification as a machinist, supervisor, Engineer, & licensed teacher + 25 years in 16 countries machine service centers (GE, Sulzer), supervise overseas workshops (Badak LNG), start-up & commissioning, chemical plants field supervisor (Dow, Mobay) trouble shooter (Brown & Root, GE),

29 years experience in Quantity Surveying, Commercial and Contracts Management in the oil & gas, nuclear and petrochemical industries. Experience in all aspects of pre-contract engineering and post-contract administration under various contracting strategies and formats.

Senior buyer with more than 20 years exposure to both the on- and offshore oil and gas / petrochem sectors and has executed materials / procurement activities for a number of world-wide projects during various project phases.

I’m interested in a Marketing Communications Director position. With over thirty years of experience, I can bring a high level of creativity as well as the ability to initiate and take small or large projects / events from concept to execution while managing all stages of the development.

Qualified and experienced in the construction/engineering and agricultural sectors - seeking position in the Middle East in one of the above areas. British Passport holder.

I have over twenty years experience in procuring, coordinating and delivering all logistical equipment needed for drilling, construction and production for oil/gas and natural gas operations. Extensive experience in J.I.B. Exceptional ability in the skill of negotiating

Diamond Drilling Foreman(FSU)

First Prev 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 [ 126 ] 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 Next Last

Seach Parameters


Goto Advanced Search...
Keywords: (e.g. mining engineer)		Find results with:

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out