Resume - A highly skilled Petroleum Engineer with over 20 years domestic and internationa...

Misco Jobs

Resume #63598

CONTACT INFORMATION:
View contact information...

Education and training:

● Graduated from the Oil & Gas University of Ploiesti-ROMANIA at 1986, Bsc. Petroleum Engineering
● Graduated special courses for laboratory testing for cementing and fracturing operations, 1986, Petros Ploiesti, -cementing engineer, basic level
●Special training for the problematic of cementing job to oil, gas and water wells from Petros Ploiesti, a Romanian national service company in 1986, 1992, 1997, 2002-cementing engineer high level
●Special courses BOP and fire intervention, of Romanian National Petroleum Training Center, CIMPINA-ROMANIA at 1986, 1992, 2000.

Personal skills and competences:
●A highly skilled Petroleum Engineer with over 20 years domestic and international experience in Petroleum Industry as a Petroleum Engineer, experience in reputed International Service Company, and good knowledge of the problematic to cement oil, gas and water wells and conversant with all most cementing equipment.
● The managing experience
●Experience in cementing techniques.
●Experience in cementing operation of HPHT wells, and deepwater wells or cementing operation for low positive temperature wells
●Experience to redress and RIH cementing tools.
● Experience to prepare the work procedure for cementing operation
● Good experience to prepare the cementing programmes for routine development/work or special conditions
● Experience to prepare job recommendations based on the available job criteria and knowledge of discipline and past performance
● Experience to carry out a cementing operation with cementing pump unit
● Experience to perform routine maintenance of the cementing equipment
● Knowledge of laboratory testing equipment and procedures for cement, mud and concrete parameters
●Experience with Gravel Packing and Sand Control Operations.
● Knowledge of decimal book
●Good working knowledge in English, spoken, read and written
● Good interpersonal skills to mix with people from a wide range of nationalities, cultures and educational backgrounds
●Some experience with job simulation cementing software.
● Experience to work in desert conditions
● Good knowledge of Microsoft Word/Excel/PowerPoint and AutoCAD,
● Languages: English-good level
Arabic -protocol level
Russian-basic level; Romanian-mother language
●Driving licenses, from 1992

Work experience:

Present-March 2006 Cementing Field specialist
Dowell Schlumberger-Service Well Company in Libya

Working for Dowell Schlumberger- Well Service Company in Libya, in position of Consultant Cementing Supervisor. During this project my main duties were:
* Executes successful jobs according to design and client specifications.
* Ensure that people, equipment and materials arrive on location in a timely manner as required by the client.
* Maintains and repairs product line equipment as needed.
* Ensure that all phases of treatment are carried out in a safe, efficient and professional manner.
* Assist Field Service Manager in preparing performance evaluations for assigned personnel.
* Trains and develops assigned employees to operate in a safe, efficient and professional manner within Company policy and procedure.
* Initiates disciplinary action when necessary, on location with crew or assigned personnel, within Field Service Manager Guidelines.
* Prepares product line report for Field Service Manager and clients.
* Promotes Company approved safety and operational policies and insures that Both Company and client safety objectives are achieved.
* Applies technical and operational knowledge by completing training modules.

2003- March 2006/ 1997 –2000 Cementing supervisor
S.N.C. LAVALIN INTERNATIONAL INC.

Working for S.N.C. LAVALIN INTERNATIONAL INC. Canadian Company acting like drilling and pipeline contractor in Libya, in position of cementing Supervisor, on Great Man-Made River Project. These projects include many water fields like TAZERBO, DJAGBUB, SARIR and pipeline connection systems. During this project my main duties were:
* Performed the cementing job for wells design including casing diameters between 4 ½¨ and 32 ¨ and depth to 1600 m and laboratory analyses for cementing and gravel pack operations.
* Carry out a cementing operations with FRACMASTER PUMP UNIT
* Managed cementing department activity with main responsibilities to:
-coordinated and supervised the work of the cementing team
-assisted in managing/training junior engineers, field engineers/technicians
- ensured safe working practices and conditions for successful operations
-prepared and accomplished the cementing programmes for routine development/work over operations, according to the procedures, during all drilling activities
-prepared the cementing programs for casing according well design and caliper log information
- prepared job recommendations based on the available job criteria and knowledge of discipline and past performance
--prepared the gravel packing programs for screen filters according drilling procedure, well design and caliper log information
-design, install and maintain a range of pumping according cementing programs
-evaluated the pumping process
- assured the routine maintenance on the cementing equipment
- ensured proper communication between cementing crew and rig crew during operations
- prepared post job reports
-prepared the mix fluid for cementing job with cement additives
-prepared the adequate program for loss of circulation of the wells
* the testing laboratory operations of the cement, hard cement (concrete), mud and gravel were done and coordinated in our laboratory from Sarir according owner request, ASTM and API standard and include,
-testing parameters of cement and cement slurry as:
- thickening time,
-slurry viscosity and rheological properties
- fluid loss,
-slurry density,
-stability of cement slurry
-testing parameters of hard set cement as compressive strength,

-testing parameters of gravel were done according ASTM, BSI or API standard according specifically manufactured procedure and include:
-sieve analysis for granulometrics test
-angularity of gravel
-organic impurity test and chemical analysis
The work also involves estimating and formulating requirements cement and chemicals required for project. The cementing job was performed with FRACMASTER PUMP UNIT; a Canadian brand pump unit similar with Halliburton or Schlumberger equipment and gravel pack operations were done with AQUA FRAC equipment.

2003-2001 / 1997 – 1986 Cementing engineer
PETROS S.A. PLOIESTI

Working for PETROS S.A. PLOIESTI, a Romanian Company, main service Company in special operations for drilling and production well of oil and gas industry.
Main responsibilities of my position were:
* Supervised cementing and packing operations, hydraulic fracturing and kill of well blow out, participated at 3 times to stop blow out from gas wells. Cementing job was performed for wells at 4500 m and casing diameters between 4 ½¨ to 32 ¨ with normal gradient of temperature or high.
* Coordinated and supervised the work of the cementing team and lead directly special operations at the oil and gas drilling wells, production and hydro geological drilling wells, as:
- Cementing - squeeze cementing,
- Cementing casing,
- Liner casing,
-multistage with DV
-cementing plug
-hydraulic fracturing or acidization for stimulation of the wells with acid or sand laden fluid pumped under pressure to improve production levels
- Pressure test to packers engaged
-prepare the cementing mix fluid with cementing additives
-testing rheological parameters of cement slurry as:
- thickening time,
-viscosity
- fluid loss,
-slurry density,
-stability of cement slurry
- testing parameters of hard cement as compressive strength,
-preparation of procedures/technologies for squeeze cementing of loss zone
-- ensure proper communication between cementing crew and rig crew during operations
- ensure safe working practices and conditions for successful operations
-prepare and accomplish the cementing programmes, according to the procedures, during all drilling activities
-prepare the cementing programs for casing according well design and caliper log information
- prepared job recommendations based on the available job criteria and knowledge of discipline and past performance
-designing, installing and maintaining a range of pumping according cementing programs
- assure the routine maintenance on the cementing equipment
-record cementing parameters in drilling report and prepare a report about cementing operations to drilling department and management department
-prepare the adequate program for loss of circulation, in special for water wells
-sand control operations for perforations
* Carry out a cementing operations with AC 500, ACF700/ACF1050 PUMP UNIT
* Prepared cement admixture with:
-bentonite, gilsonite, fly ash materials used for lower weight of cement slurry
- barite for increase density (heavier weight)
-silica (sand or flour) and weighting agents for wells with high temperature.
The cementing job was performed with AC 500 and ACF700/ACF1050 PUMP UNIT, Romanian brand pump unit equipment and gravel pack operations were done with BLENDER equipment for fracturing operations

Social skills and competences

- Dedicated with positive attitude
- Outstanding ability to communicate with various types of people
-Ambitious and hard working with the ability to work long hours
-Good interpersonal skills to mix with people from a wide range of nationalities, cultures and educational background
- Resourceful, self-motivated, and able to work well independently or as a team player
Organizational skills and competences
-managing the cementing department I had currently crew between 20 to 50 peoples depend of project
-the stress resistant is result of 20 years on drilling activity
-I am calm, rational and a good communicator for this job
- planning is the key to this job
REFERENCES: Available on request.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1151 to 1200 of 15497)

Go to Search Parameters...

Brief Description

New Mine Start Up. Project Management. Infrastructure EPCM.

Experienced in sweet and sour, oil and gas projects. Execute projects on time and on budget while working as a team player. Solutions oriented with an eye toward bottom-line results. Organized multiple projects concurrently, with successful results in a fast paced environment. Effective communicat

I am a multi-disciplined Project Services / Planning & Cost Engineer / Scheduler (Project Controls Engineer) with excellent analytical skills, flexible and strong personality, very good communication & coordination skills, team player, friendly, and result-oriented.

I have rough-necked, worked as a drilling engineer and as a consulting well-site supervisor and can relate to every level of personnel around the rig, effectively. Explainig the reasoning behind why things are done a certain way helps everyone buy into the total project, and reach a common goal.

Instrumentation Engineer

I'm Technical Degree in Geology (Associate Degree in Geology) and I'm looking for a job as Mud Engineer Worldwide.

Results-oriented, quality-driven professional with extensive experience in onshore, offshore operations and construction, demonstrating consistent achievement of objectives, strong leadership & management skills. Advance presentation & inter-personal skills and MS Office literate.

In addition to my graduate engineering degree and more than 15 year of experience in power generation and chemical plants. I have currenly done my MS in Total Quality management.

Document Controller / Document Manager/ Crewing Manager

Toopusher, Rig manager, Drilling Supervisor, Directional Driller

Senior rotating equipment with 12 years experience with sound knowledge of project engineering and project management

B. Tech. (Electrical Engg.) from Rajasthan Vidyapeth (Deemed) University, Udaipur.

KEY COMPETENCIES

A highly skilled Petroleum Engineer with over 20 years domestic and international experience in Petroleum Industry as a Petroleum Engineer, experience in reputed International Service Company

A Bachelor's degree holder in Chemical engg, have about 20+ years of Hydro carbon Industries experience both in Oil & Gas refineries and Oil production facilities. Having very good knowledge and trained in Fire fighting techniques and Plant safety equipments.

Industrial, B2B and Retail sales & marketing of ‘Fuels, Lubricants and other Petroleum Products’

Management Consultant / Project Manager / Business Process Analyst – task oriented, problem solver with successful experience in planning and implementing operational enhancements in support of critical business processes.

20 years of extensive knowledge and experience in Production, Quality Assurance & People Management in chemicals & petrochemicals plants, presently associated with YANSAB, Yanbu (Kingdom Of Saudi Arabia).

A TWI certified and registered welding inspector (CSWIP 3.1) and worked as Field Piping Engineer with fourteen (14) years extensive experienced in oil and gas construction projects, refineries, gas plant, GOSP, power plant and desalination plant. Major activities involved general oversight of the

Graduate in Mechanical Engineering having 15+years in Static Equipments & Packages Design & detail engg. engaged in Design & detailed engg. of pressure vessels, Columns for Oil & gas Applications and all other types of static equipments & packages, I have a good exposure in EPCM

I am a B.Tech (Production Engg) graduate with Nace certified Level-I coating inspector, I have more than 16 years exp in various fields including 8 years in coating field. Also I was handled various pipeline projects in oil & gas field for 5 years

I am a post graduate in chemistry working as Senior Chemist in KOC.Well experience in crude oil, Gas and Water analysis. Handling of all kind of Lab Instruments,Calibration ,standard chemicals preparation, reports making are the responsibilities.

MEP Cad Designer / MEP Cad Coordinator / HVAC Designer

Knowledgeable in electrical, mechanical, and some electronics

Lead/Senior Mechanical Engineer- Oil & Gas, Chemical, Petrochemical and Energy Industries

Free! Oil and Gas Industry onshore construction civil engineering Superintendent with 20 years experience in overseas projects.

I am a B.Sc Chemistry degree holder and have totally 24 years of very good experience in PROCESS FIELD / PANEL operations in oil/gas treatment plant. This is one of the biggest oil processing plant in India. SOUTHERN PETROCHEMICAL INDUSTRIES CORPORATION LTD., (SPIC).

Twenty plus year's progressive experience in heavy industrial design, development, and construction for petrochemical refineries, upstream petrochemical, waste water treatment, power generation, chemical demilitarization facilities, Microchip facilities, LPG gas transitions, and the food & beverage

electrical contractor for 25 years and have a ton of experience in the electrical field.

Mining Engineer in area of Mine Planning- Surpac

Electrical Supervisor Mining

I am very talented and a hard worker. I have a good eye for any type of construction.

Outstanding background of knowledge’s into oil and gas processing and utilities, more then 14 years experience into commissioning and process activities from which more than three years offshore, working into an multicultural team and with all disciplines engineers, proactive and disciplined

Prospecting,Boaring and Rotary Drilling, Geological Log and core-log Preparation Exploratory mining pit, Liaisoning, Estimation of Reserve, Sampling, Stacking, Environment pollution control & study, Preparation of Mining Plans in co-ordination with R.Q.P., Celebration of Envirnment and safety week,

24 years of experience in Upstream And Downstream (Refinery) Oil & Gas Operations and Process Engineering out of which:

20 years experience. Executive with proven management, operations, P&L management, and business law experience. Communicator, negotiator, and capital raiser. Global, regional, and country specific business expertise.

all-round civil engineering background with experience in traditional building constructions and special structures, such as bridges, tunnels, towers, piers and offshore structures including design, planning, project management, quality assurance and supervision.

Challenging job related to oilfield, where I can capitalize on my 23 years of oilfield experience with Schlumberger in management, sales, marketing and contracts negotiations. No geographical preference. No schooling constraints.

20+ years experience in private & public sector contract, program/project mgmt. Developed/initiated groundwater evaluation,implementation, monitoring & technology development plans for containment and/or clean-up of nuclear and non nuclear waste (domestic/international).

Geophysical modelling Rock physics, AVO, Pre-stack and Post-Stack Seismic Inversion, seismology, reservoir characterization, Interpreted seismic data (3D, 2D) & amplitude analysis using Seisworks, PostStack/ PAL, IESX, and EarthCube. Certified Landmark Graphics instructor

I have completed a BSc in Geology and a PhD in Petroleum Engineering. In the last 20 years working for BP I have worked as a Production Technologist, Completions Engineer, Reservoir Engineer and in Production Operations, both onshore and also offshore on an FPSO, in recent years as a Team Leader.

Extensive experience and skills to help industrial organizations improve their effectiveness through better use of processes and systems. Also very proficient in development and use of integrated improvement teams.

22 yrs experience in environmental science. Marine, freshwater and coastal. Environmental impact assessment. Monitoring, mitigation and remediation programs for impacted habitats. Extensive international experience, wide industry experience. freelance.

Geophysicist, 4+ years of experience in the seismic data processing onboard & in data processing center. Ph.D. in the field of Geophysics. Skills: Seismic Data Processing (2-D/3-D) by ProMax & Focus, imaging by Geodepth (Depth-Velocity modeling, Depth Migration), AVO analysis by Probe.

Reservoir Engineer with over 20 years of experience in international oil company, consulting/software company and consulting company both in technical capacities and management and business development.

field appraisal, depletion, material balance, well test, reserve estimates, water injection, fractional flow, gas injection, reservoir evaluation, production forecast, reservoir and production monitoring, data acquisition, multilaterals, development projects, reservoir modelling and simulation.

7 years experienced in Oil Refinery Operations . 8 years experienced in Petroleum and Gas Processing Engineering (Design, Research and Development of Oil Refinery Processes). 5 years of international exposure in Europe , Asia, Africa, Middle East .

Knowledgeable and experienced Design Procedures with 15 years road construction experience

I have a record of outstanding success in the field of Instrumentation Engineering for the past 20 years with various clients and consultants in India and overseas for the Oil & Gas (both onshore and offshore upstream)/Petrochemical/LNG Projects/Plants.

Professionally Qualified Engineer / Manager, Harvard Business School Alumni, Certified Project Manager (PMP) - Now In General Management In Oil & Gas Up & Mid Stream

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 [ 24 ] 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Goto Advanced Search...
Keywords: (e.g. mining engineer)		Find results with:

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out