Resume - I am NACE International’s CIP Level 3 (Peer Review) Certified Coating Inspector ...

Misco Jobs

Resume #63683

CONTACT INFORMATION:
View contact information...

PERSONAL INFORMATION_____________________________________________________________________________

Date of Birth ƒç January 15, 1974
Nationality ƒç Indian
Resident Status ƒç Employment Pass (Q1) Holder in Singapore

QUALIFICATIONS______________________________________________________________________________________

Academic ƒç University Degree
„Ñ Bachelor of Science (B.Sc.) with Chemistry, University of Burdwan - India

Technical

Coating & Painting ƒç NACE INTERNATIONAL, USA.
„Ñ CIP Level 3 (Peer Reviewed) - NACE Certified Coatings Inspector,
NACE International, Houston, Texas, U.S.

Passive Fire Protection ƒç „Ñ CHARTEK QA/QC Inspector and Applicator Training conducted and
Certified by International Paint.

EXPERTISED FIELDS_IN QC INSPECTION FOR OIL & GAS PROJECTS____________________________________

Protective Coatings & Painting ƒç Surface Preparation (Blast Cleaning, Water Jetting, Power Tool Cleaning, Hand Tool
Cleaning) & Protective Coatings of Various types.

Passive Fire Protection ƒç „Ñ QC Inspection for Cementatious Fireproofing Materials as well as CHARTEK,
Thermo-lag, Firetex, Pit-chart Fireproofing Systems.

Thermal Spray Aluminium ƒç For Oil & Gas Projects as per relevant ASTM / ISO Standards

Galvanizing ƒç For Oil & Gas Projects as per relevant ASTM / ISO Standards

Chemical Cleaning & Passivationƒç For Oil & Gas Projects as per relevant ASTM / ISO Standards

Insulation ƒç Heat Conservation Type & Cold for Oil & Gas Projects.

Quality ƒç „Ñ Documentation, Quality Management System & ISO 9000

Health, Safety & Environment

EMPLOYMENT HISTORY_______________________________________________________________________________

May 2005 to present ƒç SMOE Pte Ltd, A SembCorp Utilities Company, Singapore, SEA.
„« QA/QC Senior Inspector - Lead Corrosion Protection

December 2004 to May 2005 ƒç Hyundai Engineering Construction Co., Ltd., in Tripoli, Libya.
„« QA/QC Engineer - Corrosion Protection

October 2003 to November 2005 ƒç Consortium of Technimont SpA, Milan, Italy & Saipem s.a. - Paris, France
„« QA/QC Engineer - Lead Corrosion Protection

December 1997 to October 2003 ƒç Punj Lloyd Limited, New Delhi, India & Abu Dhabi, U. A. E.
„« QA/QC Engineer - Coating & Insulation

January 1992 to December 1997 ƒç M/s. B. B. Engineering, Durgapur, West Bengal, India
„« Senior Executive - Workshop

WORK EXPERIENCE SUMMARY_______________________________________________________________________

INTERNATIONAL EXPOSURES:

On-going International Projects with my present organisation in Singapore:

„« Bohai FPSO Project, China. Owner / Client - Conoco Phillips.
Works: Construction of Top Side Modules & Integration - consists of Construction, Hydro test and Commissioning of
Process Piping along with Structural Steel, Insulation, Coating, Passive Fire Protection, erection and installation of
Equipments, electrical & instrumentation works.

Successfully Completed International Projects with my present organisation in Singapore:

„« Third Transmission Pipeline Project, Bongkot, Thailand. Owner - PTT. Client / Consultant - Bechtel International. Consortium - SMOE Pte., Ltd., - Singapore & Saipem s.a. - France. Works: Construction of Living Quarters & Process Modules for Offshore Platform System - consists of Construction, Hydro test and Commissioning of Process Piping along with Structural Steel, Insulation, Coating, Passive Fire Protection, erection and installation of Equipments, electrical & instrumentation works.

„« Erha FPSO Project - Nigeria Deep Sea Water Project. Owner - Exxon Mobil (ESSO Exploration & Production Nigeria Ltd.). Prime Contractor - Saipem s.a., Paris, France. Works: Construction of Top Side Modules & Integration - consists of Construction, Hydro test and Commissioning of Process Piping along with Structural Steel, Insulation, Coating, Passive Fire Protection, erection and installation of Equipments, electrical & instrumentation works.

Previous International Projects with my previous organizations:

„« Western Libya Gas Project, Onshore Mediterranean Sea, Tripoli, Libya. Owner - AgipGas BV Eni. Consortium - Snamprogetti SpA, Italy & Hyundai Engineering Construction Co., Ltd., Seoul, South Korea. Works: Construction of Onshore Gas Process Terminal - consists of Construction, Hydro test and Commissioning of Process Piping, Storage Tanks, LNG Tanks along with Structural Steel, Insulation, Coating, Passive Fire Protection, erection and installation of Equipments, electrical & instrumentation works.

„« Shell LNG Receiving Port & Terminal Project, Hazira, Surat, India. Owner - Shell International. Consortium - Technimont SpA, Milan, Italy & Saipem s.a. - Paris, France. Works: Construction of LNG receiving Port & Terminal including Cryogenic Tanks & Piping, Structural Steel, Civil, Instrumentation & Electrical Works, Equipments erection & Installation.

„« MSPF - Once through Hydro Cracker Unit (OHCU) Project. Client - IOCL Panipat Refinery. Prime Contractor - Daelim Industrial Company Ltd., Seoul, Korea. Consultant - EIL. Works: Construction, Hydro test and Commissioning of Unit Piping along with Structural Steel, and Equipments.

WORK EXPERIENCE SUMMARY________________________________________________________________________

INTERNATIONAL EXPOSURES:

Previous International Projects with my previous organizations:

„« FUJAIRAH WATER & POWER PROJECT (Pipelines), Abu Dhabi (UAE). Client - UAE Offsets Group. Prime Contractor - Technip, GmbH, Germany. Consultant - Fichtner. TPIA - Bureau Varitas, Abu Dhabi Chapter. Works: Construction of 9 nos. Water Storage Tanks.

„« SULPHUR RECOVERY UNIT (SRU) & VIS BREAKER UNIT (VBU). Client - Chennai Petrochemical Corporation Limited (CPCL), India. Consultant - EIL. Prime Contractor - Petrofac International, USA. Works: Construction, Hydro test and Commissioning of Unit Piping and Storage Tanks Including Structural Steel, Civil Works, Instrumentation, Equipments erection and related Piping.

„« SULPHUR RECOVERY UNIT (SRU), OFF SITES & UTILITIES PROJECT. Client - IOCL Guwahati Refinery, India. Consultant - EIL. Prime Contractor -Siritec Nigi sPa, Itally. Works: Construction, Hydro test and Commissioning of Unit Piping and Storage Tanks including Structural Steel, Civil Works, Instrumentation, Equipments erection and related Piping.

„« DABHOL LNG POWER PROJECT. Client - ENRON. Consultant - Bechtel. Prime Contacctor - Lintech / Skanska International. Works: Construction of 03 nos. 160,000 Cu.m. capacity LNG Cryogenic Storage Tanks and Regassification Unit, part of 2184 MW capacity distinguished power project.

„« MSPF - Once through Hydro Cracker Unit (OHCU) Project. Client - IOCL Mathura Refinery. Consultant - EIL. Works: Construction, Hydro test and Commissioning of Unit Piping along with Structural Steel, Civil Works, Instrumentation and Equipments erection.

„« LPG CRYOGENIC PAKAGE. Client - Reliance Petroleum Ltd., Jamnagar Refinery. Consultant - Noevel LGA / DNV. Works: Construction of 01 no. LPG Cryogenic Storage Tank and related piping works.

„« Marine Tank Farm Project. Client - Reliance Petroleum Ltd. Jamnagar Refinery. Consultant - Bax Counsel. Project management - Bechtel India Limited, S.A. Works: 23 nos. of Crude Oil Storage Tanks and related piping works.

WORK EXPERIENCE SUMMARY

- 13 years of total experience in protective coatings
- New construction onshore & offshore, Oil & Gas, Refineries, Steel & Power Plants projects
- Maintenance contracts onshore and offshore locations
- Shutdown contracts onshore and offshore locations
- Special skills in
- Coating, Painting & Linings
- Passive Fire Protection
- Thermal Sprayed Aluminium

Project Management

- Title, function, responsibilities and authorities
- Key contacts for co-ordination
- Scope of work, project contractual requirements such as milestones and completion schedule
- Design engineering, fabrication and construction sequence
- Review specification (including all amendments and pertinent appendices), applicable codes and standards
- Conflicting requirements, project field change requests, technical deviations and engineering change notices
- Pre-job conference records or minutes of meetings
- Attend ad-hoc clarification meetings with client
- Review tender documents for paint supply subcontract
- Attend tender clarification meetings with paint vendors
- Review paint vendor priced & un-priced (technical) documents
- Perform audit at paint vendor facility to assess capabilities
- Submit assessment report & recommendations on potential paint vendors
- Attend technical & commercial negotiation meetings with paint vendors
- Attend paint vendor finalization meeting
- Review paint vendor documents
- Project history or track record
- Project specific site technical representatives resume
- Key personnel - title, function, responsibilities and authorities
- Daily report or log
- Specific field tests & reports
- Laboratory test reports
- Review tender documents for blasting & painting subcontract
- Attend tender clarification meetings with subcontractors
- Review subcontractor priced & un-priced (technical) documents
- Perform audit at subcontractor facility to assess execution capabilities
- Submit assessment report & recommendations on potential subcontractor
- Attend technical & commercial negotiation meetings with subcontractor
- Attend subcontractor finalization meeting
- Review subcontractor documents
- Project history or track record
- Project organization chart
- Resume of key personnel
- Key personnel - title, function, responsibilities and authorities
- Manpower histogram
- List of plant, machinery, equipment, tools, inspection instruments & site office facility
- Procedures
- Inspection test plan
- Daily progress report
- Daily inspection report
- Review company procedures and inspection test plan
- Ensure effective utilization of subcontractor resources
- Monitor subcontractor performance
- Monitor project schedule planned VS actual
- Identify areas in critical path, cause and effect
- Establish, implement & monitor recovery plan
- Attend quality surveillance with client
- Conduct co-ordination meeting
- Conduct weekly meeting with subcontractor
- Review & verify subcontractor monthly valuation
- Advise contracts department on variation orders & claim
- Constant co-ordination with project management team
- Cause and effect of corrosion
- Protection, maintenance and prevention of corrosion
- Design and material selection
- Anti-corrosion protective coatings
- Surface preparation methods
- Mechanical surface preparation during pre-fabrication and onsite portable centrifugal blasting
- Open air blast cleaning
- Vacuum blast cleaning
- Hydroblast cleaning
- Wet blast cleaning
- Hand and power tool cleaning
- General uses of coatings / linings / wrappings
- Painting
- Galvanizing
- Thermal Sprayed Aluminium
- Passive Fire Protection
- High performance internal linings
- Tape wrapping
- Cement linings
- Self leveling compounds
- Anti-skid deck coatings
- Type of coatings commonly used and the major components of coatings
- General physical and chemical properties of the generic types of coatings and application process of coatings / linings
- Calibration of inspection and test instruments
- Using coatings inspection and test instruments
- Defects affecting performance of the applied coatings
- Causes for most common coating defects
- Inspection of defects on coated surface
- Acceptable and unacceptable defects
- Identification of defects and implementation of repair procedure
- Premature failure analysis of coatings
- Protective coating inspection standards for field and shop applications
- Internal spin blasting and spray painting methods
- Plural spray method
- Hot spray method
- Documentation

Enforcement and verification of work performed in accordance with specification, manufacturer recommendations and applicator coating procedure.

- Witness applicator qualification or trade test and paint system qualification
- Measure ambient conditions, surface temperature and air quality requirements
- Inspect location and suitability of access for areas of work
- Inspect type of blasting equipment and tools to be used
- Inspect type and size of blasting media
- Inspect metal surface imperfections / defects
- Test indication of oil or water in compressed air
- Test conductimetric analysis of water-soluble ionic contamination of blasting media
- Inspect pre-cleaning or solvent cleaning of surface
- Measure compressed air pressure
- Inspect degree of cleanliness required
- Measure surface profile of blast cleaned surface
- Assess surface cleanliness of blast cleaned surface
- Assess surface cleanliness soluble salt contamination on blast cleaned surface
- Inspect coating material storage conditions
- Inspect type of coating material to be used
- Monitor thinning, mixing, induction time and pot life
- Inspect type of coating application equipment and tools
- Monitor application method, type and pattern
- Measure wet film thickness by notch gages
- Non-destructive measurement of dry film thickness of non-magnetic coatings applied to ferrous surface
- Non-destructive measurement of dry film thickness of non-conductive coatings applied to non-ferrous surface
- Destructive measurement of dry film thickness of coatings
- Monitor re-coating and final curing schedules
- Test MEK resistance of Inorganic Zinc Rich Primers by solvent rub
- Test film hardness
- Measure the adhesion of coatings applied
- Test pull-off strength of coatings applied
- Test discontinuity (holidays or pinholes) of nonconductive coatings and linings

Health, Safety & Environment

- Understand local and international legal and HSE regulations
- Project specific HSE requirements
- Witness tool box briefing, safety surveillance & safety audit

Administration

- Delegation and distribution of responsibilities
- Employee recruitment
- Employee training needs & wellness programs
- Employee appraisal
- Constant interaction, counseling & team building session

OBJECTIVE

Obtain a position that will allow the utilization of my skills and knowledge tempered by over thirteen years of professional experience in Protective Coatings and Corrosion Prevention and ultimately, to become a long term, highly valued employee of a successful organization.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 5051 to 5100 of 15512)

Go to Search Parameters...

Brief Description

A position as a Computer Web Designing / Software Programming / Hardware & Networking / Data Entry / Documentation for a company concerned about the integration and design of their operational network.

Thirteen years of experience in the field of project management, feasibility Studies, front end engineering, conceptual design, Project proposals, detail design, flexibility Analysis, procurement assistance in piping/pipeline design.

Qualified Civil Engineer-total of 16 years of experince in construction industry as Structural Engineer and Design Engineer in the filed of civil engineering and post tensioning of buildings ans bridges

Process Engineer in Oil & Gas Consultancy.

Area of Interest AVO/AVA, Inversion, Reservoir characterisation using Pattern Recognition and Spectral Decomposition and Attenuation.

Completion and workover engineer (11.5 years experience)

Mineral processing engineer, AutoCad drafter and transportation system design

Experience in field development plan, identification of workover requirements, well completion, acquisition of subsurface data, optimization of well performance and project management,

I beleive my strong college degree and work experince in mining, construction and logistics operations will be an asset for any organization.

Over 13 years of professional experience in all facets of highway engineering covering planning, design using MXROAD software and AUTOCAD, including widening of national highways and Expressways. Experience cover route selection of Highways, geometric design, pavement design of pavements etc.

Contract Oil & Gas Technical Writer Twenty years of progressive responsibilities in oil and gas industry.

mapping, remote sensing, exploration, aerial primary data acquisition.

Schlumberger 17 years Coiled Tubing / Nitrogen services/Fracturing

Design and drafting OIl and Gas processign facilities, Structural, Piping, Civil. 7 Years experience with 3D CADWORX modelling on Canadian and international projects. Recently worked on Enterprise's Meeker II facility as well as Green River Gas Plant (PROPAK) early 90's.

Bilingual English-Spanish Project Manager with over 6 years of experience working for diverse industries including the Oil, the light and heavy construction, and the Steel Production.

Smelter expert - ISA smelter; waste Heat Recovery Boiler (WHRB), DM Plant, Electric Arc Furnace, Rotary Holding Furnace (RHF), Converters, Anode furnace, casting wheel and Sulfuric Acid plant.

I would like to apply with your company for the position of a INSTRUMENT SUPERVISOR /TECHNICIAN I have 11 years of oilfield ,gas plant ,power plant and some process plants experience as an SUPERVISOR, TECHNICIAN . I am having good work experiance with clients like ENI , IRAN PHASES 4 & 5 KOC -

Responsible for crude evaluation, expansion project related configuration studies, perspective planning and scenario analysis and retro analysis.

Exploration Geologist

Graduate /Diploma in Computer Application, Tally , Corel draw, Typing Speed @ 40 W.P.M.

I have completed my Masters degree in Chemical Engineering from Lamar University. I have experience in ASPEN PLUS, ASPEN DYNAMICS, HYSYS, PRO-II for two years. I did my internship in Dynamic Engineering Purity Inc. for six months.

mechnical welding and NDT inspector

I am a mechanical engineer and I have been in the OIL & GAS DRILLING profession for past five years as rig mechanic, who is engaged in repair and maintenance of RIG equipments. I have good communication skills as well as great commitment towards work

HYSYS simulations, process design, optimization, Process flow diagrams (PFD) and P&ID

Never give up persom and full of integrity

Presently I am working with M/s B. S. Chaudhry & Co. as a Mud Engineer on E 760-II (1600 HP SCR), M 900-1 (900 HP), M 750 (750 HP), Cardwell-6, & Cardwell-7 since Jan.-2007 to till date continue at Mehsana Asset under MMC contract with ONGCL

M.Tech-Control Systems Engineer with 2 years of Experience in Teaching and Projects Handling

Retain & supervise outside professionals (including attorneys & land professionals) for lease and property acquisitions. „X Negotiate, prepare and administer oil & gas leases, operating, farm-out, and exploration agreements. Build Abstracts of Title. Sharp, innovative, quick learner and have

2 years and 3 months of experience as geologist of underground mine of Au/Ag and the exploration to ore deposits of Au, Ag, Cu and W. All this in my country, México.

Having experience in Mechanical Engineering in the field more than 10 years of Oil and Gas and Manufacturing industries mostly in engineering and inspections. Has worked in INDIA,and SINGAPORE on Onshore & Offshore.

my educational in Highway Engineering has been balanced by actual work experience. I have worked for a leading Infrastructure contractor Arabtec Construction from November 2004 to Jan.2007 and recently I¡¦m working with a leading government authority RTA as Traffic Safety Engineer

over 10 years experience in electronic and over 2 years offshore electrical.

Geologist with strong work ethic & 5 years exprience in Appalachian Basin with a sturdy skill set.

Substation Automation engineer with 5 years of experience

DCS, Control system and Maintenance Engineer

MCA with 2 Years exp in asp.net,vb.net,asp,vb,c#,html,sql,access

Regular visits of unmanned platforms and Taking care of all production / maintenance activities on day to day basis.

I am working as a highway engineer from past 6 years. I have over 3 years of experience with MX design software, 2 years with Inroads one year with Land Development Destok. In my past experience I involved using Indian code, dutch codes and AASHTO codes.

As a Land / Hydrographic Surveyor with 19 years experience covering a variety of harbour surveys, ocean, dredging, engineering, buildings, breakwater construction, jetty construction, roads and offshore construction surveys working with numerous projections and spheroids.

Experienced Consultant Wellsite Geologist with 10 years of International Experience

Project management of a quarry/mining operations.

Experienced Electronics and Communication Engineer for 13 years, performing electronics and communication task which includes bench troubleshooting, repair, maintenance, installation and commissioning. Performing Assistant Supervisory task.

E & I designer

Currently Working with PCPL (PETRONAS CARIGALI PAKISTAN LTD). As a FMC Field & Materials Coordinator

Establishment of Health, Safety and Environment Management function

Higher secondary (Pre Degree Certificate, Kerala University in India) & • Three Years Diploma in Mechanical Engineering (Technical Education Department Kerala, India.)

Seven year experience in HVAC design and maintenance

I am NACE International’s CIP Level 3 (Peer Review) Certified Coating Inspector having over 13 years of experiences in QA/QC Inspection of Corrosion Prevention Activities & Insulation Inspection for Oil & Gas Projects.

Safety Director, Electrical Construction

Over 24 years of extensive experience in progressively responsible positions in the Construction Industry. I speak Russian.

First Prev 101 [ 102 ] 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 Next Last

Seach Parameters


Goto Advanced Search...
Keywords: (e.g. mining engineer)		Find results with:

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out