Resume - Mining Engineer MBA, PE, 30 years international experience in precious metals ma...

Misco Jobs

Resume #64117

CONTACT INFORMATION:
View contact information...

Master of Business Administration (MBA) May 2001.
College of Business, University of Nevada, Reno

BS Mining Engineering May 1978
Mackay School of Mines, University of Nevada, Reno

WORK EXPERIENCE:
w/ ORO SILVER RESOURCES LTD

VICE PRESIDENT OPERATIONS & COO
Reno, Nevada Feb 08 to Present
Reporting to the Chief Executive Officer, responsible for all engineering aspects of OSR and bringing OSR’s projects into production.

w/ YAMANA GOLD INC. / MERIDIAN GOLD

DIRECTOR OF PROJECT DEVELOPMENT
Reno, Nevada Oct 07 to Feb 08
Reporting to the Vice President Technical Services, directed project development for the Mercedes Project in Mexico, and the Jeronimo, La Pepa, and Amancaya Projects in Chile.

CORPORATE DIRECTOR OF TECHNICAL SERVICES
Reno, Nevada Nov 05 to Oct 07
Reporting to the Vice President Operations, provided operations technical support for the Rossi JV with Barrick in Nevada, El Penon and Minera Florida mines in Chile, support in M&A due diligence efforts to the Vice President Business Development, and project development coordination for the Jeronimo Project in Chile. Direct reports include one mining engineer (Manager of Mining Engineering).

w/ PLACER DOME INC. / GETCHELL GOLD CORPORATION

MANAGER, BUSINESS SUPPORT & DEVELOPMENT – Placer Dome America
Reno, Nevada Sept 03 to Oct 05
Reporting to the Vice President, Business Support & Development of Placer Dome America, provided technical and financial support to Placer Dome Inc business units worldwide, including evaluation of proposed new business ventures. Coordinated the due diligence exercise for the Turquoise Ridge-Twin Creeks Joint Venture and assisted on ore reserve audits. Also active in monitoring and analyzing competitor companies, and creation/analysis of valuation models for proposed M&A targets and other business ventures. Seconded to a commercial team (reporting to the Vice President Projects – Commercial), held an analyst role in the financing of the $2 billion Cerro Casale project in Chile, as well as in the financial/economic evaluation of the proposed $1 billion Pueblo Viejo project in the Dominican Republic.

SENIOR MINE ENGINEER, BUSINESS SUPPORT & DEVELOPMENT – Placer Dome America
Denver, Colorado Feb 02 to Sept 03
Provided technical and financial analysis support to Placer Dome Inc business units worldwide, including analysis of proposed new business ventures in both open pit and underground environments. Assisted on the South Deep Life-of-Mine Plan, Johannesburg, South Africa. Evaluated trade-offs and potential transition from open pit to underground mining techniques at Bald Mtn and Cortez-Pipeline Mines. Conceptualized the mine plan and underground capital improvement projects for restarting the Turquoise Ridge Operations and oversaw preparation of the mine plan adding over $50 million in NPV to Placer Dome Inc’s account. Designated as the QP (Qualified Person for NI 43-101 purposes) signing off on 2.7 million ounces of Mineral Reserves, and assisted with expediting the restart of Turquoise Ridge Operations.

CHIEF ENGINEER - Getchell Gold Project
Golconda, Nevada. Apr 01 to Jan 02
Reported to the Mine General Manager, and managed a staff of 6 mining engineers and 1 surveyor with a 2001 operating budget of nearly $2 million. Successfully integrated and aligned engineering functions with strategic business planning. Oversaw the preparation of the mining portion of the Getchell Prefeasibility Study and the business unit Strategic Business Plan. These efforts included oversight of $1 million in consulting engineering contracts. Significant challenges were the definition of systems to overcome difficult underground operating conditions and the evaluation of reopening the Getchell property in a low gold price environment while clearing corporate financial hurdles.

MINING STUDY COORDINATOR - Getchell Gold Project
Golconda, Nevada. June 99 to Apr 01
Coordinated mine-related evaluation efforts and prepared life-of-mine Strategic Business Plans for the Getchell Gold Project subsequent to the acquisition of Getchell Gold by Placer Dome. Coordination efforts included reserve estimations, conceptualization of underground and potential open pit mine systems architecture and materials handling infrastructure, preparation of development and production plans and schedules, and estimation of operating and capital costs. Preparation of the Strategic Business Plans included spreadsheet modeling of pro-forma income statements, balance sheets and cash flow statements, and financial analyses leading to strategic recommendations to executive management.

CHIEF MINE ENGINEER - Getchell Gold Project
Golconda, Nevada. May 97 to June 99
Oversaw the departmental activities of long and short-term mine planning, development and production scheduling, management reporting, rock mechanics studies, ventilation designs, and engineering oversight on capital projects. Supervised a staff of 7 mining engineers, 2 technicians and 4 surveyors.

SENIOR MINE ENGINEER - Turquoise Ridge Project
Golconda, Nevada. September 96 to May 97
Coordinated engineering/design, procurement and construction activities of over $7 million in capital projects for a twin-shaft (1800-ft deep) gold mine under development. Projects included a $3.0 million cemented rockfill system, a $2.7 million 38,000 square-ft. office/changehouse facility, and a $1.6 million 20,000 square-ft. warehouse. Also prepared underground equipment evaluations and mine plans using Vulcan mine design software, and performed field engineering for shaft sinking activities.

w/ ASHANTI GOLDFIELDS COMPANY LTD

SENIOR PROJECT ENGINEER - Backfill
Obuasi, Ghana, West Africa. April 95 to August 96
Oversaw engineering, procurement, plant construction, underground development and installation of a mine wide hydraulic backfill system, with responsibility for a $22.2 million capital budget. JCI, (the EPCM contractor), reported directly to me (project management role not reflected in job title). Responsibility covered the installation of a 200 tonnes/hour Tailings Treatment Plant, two overland transport slurry pipelines, and two 200-tonnes/hour hydraulic fill prep plants as part of a major expansion and capitalization of Ashanti’s Obuasi deep shaft gold mine (production rate of 1.6m tpa increasing to 3.8m tpa).

w/ NEWMONT GOLD COMPANY

CHIEF UNDERGOUND MINE ENGINEER, Rain & Carlin Main U/G Mines
Carlin, Nevada. April 94 to April 95.
Held the role of Project Superintendent of the Rain U/G Mine (144,000 tpa), successfully managing an underground mine contractor and developing the Rain Mine into a profitable, safe 400 tons/day operation on schedule and on budget ($5.3 million annual operating budget). Although the Rain Mine had the lowest grade of the three Newmont underground mines under development at the time, it had the lowest unit costs and highest productivities. Simultaneously maintained the position of Chief Underground Mine Engineer, supervising a 4-man survey crew, 1 mining engineer, and 2 mine geologists at the Rain Mine. Used Vulcan mine planning software in the preparation of life-of-mine designs.

w/ HECLA MINING COMPANY

SENIOR PROJECT ENGINEER / UNDERGROUND MINE SUPT., Grouse Creek Project
Stanley, Idaho. February 93 to February 94.
Prepared mine plans, engineering/cost studies, and proforma cash flow analyses prior to start-up of the construction of the 2.1m tpa open pit and underground Grouse Creek Mine. Subsequently managed and directed the preproduction development and surface facilities construction of the underground mine (140,000 tpa) portion of the Grouse Creek Project. Was responsible for a $6.0 million capital budget, a workforce of 21 miners and surface construction contractors.

SENIOR MINING ENGINEER & PROJECT ENGINEER, Hecla Mining Company Corporate Office
Coeur d'Alene, Idaho. October 90 to February 93.
Prepared conceptual mine plans, designs, engineering/cost studies, proforma cash flow analyses, and other due diligence work for corporate projects and potential acquisitions. Projects included underground mines and open pit heap leach proposals. Coordinated engineering consultants for a major 4+ million-cubic-yards earthworks project (site prep and tailings impoundment areas) at the Grouse Creek Mine. Played a key role in the conceptualization, engineering, procurement, construction supervision, and commissioning of a $0.5 million cemented alluvial backfill plant at the Republic Mine, Washington. Prepared operating cost models to support the successful introduction of mechanized cut-and-fill mining at the Republic Mine.

w/ RENISON GOLDFIELDS CONSOLIDATED (RGC)

ASST UNDERGROUND MINE SUPT, Porgera Joint Venture (Joint Venturers: RGC, Mt Isa Mines, Placer Dome & PNG Gov’t)
Placer (PNG) Pty LTD, Papua New Guinea. June 89 to September 90.
Controlled and directed the underground mine operations, (alternating with the Underground Mine Superintendent), for the underground Porgera gold mine (550,000 tpa). Jointly managed (with the Underground Mine Superintendent) a workforce of over 100 employees, and met development targets of 350 meters per month. Developed and implemented operating procedures. Prepared operating and capital budgets. Evaluated & optimized a plan to increase mine production from 1500 to 3500 tonnes/day. Coordinated design consultants and contractors for an underground crusher installation, a vertical conveyor shaft hoist, a cement slurry plant, underground conveyors, and a major raise-boring contract.

Acting SENIOR MINE ENGINEER, Renison Mine.
Tasmania, Australia. March 89 to April 89.
Supervised 3 mine planning engineers and 1 technician for a 900,000 tpa underground tin mine.

UNDERGROUND MINER & SHIFT BOSS, Renison Mine.
Tasmania, Australia. January 88 to February 89.
Worked 6 mo. as an underground miner and 7 mo. as an underground shift supervisor (over 20 miners) in both development and production activities in fulfillment of Mine Manager's Certificate requirements.

w/ NORTH KALGURLI MINES LTD.

TECHNICAL ASSISTANT to the MINE SUPERINTENDENT, Fimiston Lease
Kalgoorlie, Western Australia. October 86 to January 88.
Managed the U/G Mine Dept. Projects and Planning section for the Main, Croesus, and Paringa Shafts on the Fimiston Lease (220,000 tpa underground gold). Supervised 5 mining engineers in the rationalization of transport and stoping operations, and preparation of mine plans and schedules. Prepared cash flow analyses for pre-feasibility expansion studies.

w/ SUNSHINE MINING COMPANY

CHIEF ENGINEER, Silver Peak Operations.
Silver Peak, Nevada. July 80 to October 86.
Played a key role in bringing the 250,000 tpa 16-To-1 Mine from the exploration stage through development to full operation. Stayed with the project until closure. Oversaw one mining engineer and one surveyor in the preparation of mine plans and designs. Supervised and coordinated surface and underground plant construction (including tailings dam lifts), performed surface and underground surveying, prepared pre-feasibility studies for reopening the Nivloc Mine, maintained the Nevada State and Federal permits for the operation, and oversaw the activities of an open pit mining contractor at the nearby Weepah Mine.

ROCK MECHANICS ENGINEER, Sunshine Mine
Kellogg, Idaho. June 78 to July 80.
Maintained the micro seismic monitoring system and performed entry-level project engineering at the mile-deep, century-old Sunshine underground silver mine. Mining methods included square-set cut-and-fill, using hydraulic sandfill.

OTHER QUALIFICATIONS & EXPERIENCE:

Registered PROFESSIONAL ENGINEER, Mining Engineering, Nevada & Idaho
METALLIFEROUS MINE MANAGER’S CERTIFICATE of COMPETENCY, Tasmania, Australia
Member of the Society for Mining, Metallurgy, and Exploration Inc.
Member of the Australasian Institute of Mining and Metallurgy
Held summer mining positions as follows:
1976 Blaster’s Helper, Weed Heights Mine, Anaconda Copper Co., Yerington, Nevada.
1975 Scram Repairman, Climax Mine, Climax Molybdenum Co., Climax, Colorado.
1974 Chute Tapper & Track Repairman, San Manuel Mine, Magma Copper Co., Arizona.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 201 to 250 of 15341)

Go to Search Parameters...

Brief Description

Project,Resident,Engineer,Coordinator,Administrator

I am a seasoned, experienced geophysicist/geoscientist & explorationist, and am updated with the latest technology, with in-depth experience in geophysics, as well as geology. I seek a suitable position in oil & gas G & G.

TOP MANAGMENT PROFESSIONAL Oil & Gas Onshore and Offshore Drilling ~ Power Projects Management ~ Materials & Contract Management

Free Lancer Nace Certified Coating Inspector, SSPC Certified Protective Coating Inspector, AWS Certified Welding Inspector, ACA Certified Corrosion Technologist 24 years of exp. in Coating field. Third party experience in Petro Chemical Industry for last 12 years

Mineral Engineer with 18 years experience in iron ore processing plants particularly in operational and process control.

Instrumentation and electrical , DCS , PLC

EXECUTIVE RELATIONSHIP DEVELOPMENT / CLIENT NEEDS EVALUATION / INNOVATIVE SOLUTIONS

Chemical Technologist Cum Top Management Marketing Professional With 23 Years Experience In Speciality Chemicals ,Dyes ,Pigments, Waterbased Acrylic Emulsions Applicable To Textile , Paint ,Leather , Paper , Plastic & Polymer Industries.

HYSYS/PROII/NGL/LPG/LNG/SYN GAS - CONCEPTUAL, FEED AND DETAIL - REFINERY, NATURAL GAS, CRYOGENIC PROCESS, SOUR GAS REMOVAL, ADVANCED PROCESS CONTROL (APC), GASFICATION (BtL, CtL and GtL). DISTILLATION AND REACTOR. HYSYS/PROII/ Distillation/Separation Sequence/Pinch Analysis.

HVAC FOREMAN

Chemical engineer with MBA and over 20 years of process engineering experience.

Drilling supervisor onshore with a good experience in multilateral wells.

22 years experience in maintenance , compressor , generator , pump , drilling equipment , machine shop service , manufacture , inspection service , production , wire line , fishing tools , welding work , commissioning.

Process/Commissioning/Start-up/Operation/Exploitation/Engineer

Condition Monitoring, Reliability Engineer

HSE-Engineering Graduate, P.G. Diploma in Industrial Safety, NEBOSH ,Ecology & Environment, Lead Auditor OHSAS 18001, specialized in Process and project Safety Management, Safety Auditor, Emergencies Planner, Advance Experience in the Management of Major Accident Hazards Controller and Trainer

Free! Geologist with 20 years experience in minerals exploration & oil and gas industries.

Pipeline, Piping & Mechanical Equipement design and construction support

Worked in exploration, production and academia

Pressure vessel design engineer, Proficient with: SolidWorks, Inventor, Pro/E, AutoCAD, Algor, ANSYS, COSMOS, Matlab, Compress Codeware, Intuitive ERP; Proficient with ASME Code VIII, Div. 1 & ASME Code VIII Div. 2, B31.3; kill at using the knowledge in WRC107 & WRC279

Exploraton Geologist, energy, base, and precious metals. Advanced degree, international experience

Highly skills reservoir engineer with 18 years E&P experience and a Masters in Petroleum engineering Degree. Experience includes reservoir simulation, water flood design and management, EOR techniques, Heavy oil development, reserves evaluation, well test design and analysis & reservoir management

Involved in planning, designing & construction of different building. Electrical, water & sanitary lines. Acquired experience in administration & accounts.Implemented & executed several projects successfully.Eperienced in purchases,entering into contracts,quality control, payment to contractors etc

19 years experience in the Oil Industry with both service company & operators in UK, Oman, Australia, Brunei, Saudi, and Malaysia. Experience in Field Development Geology and geocellular modeling.

Position: Senior Instrument Engineer / Qualification: Master of Science (Electronics) - Queen’s University of Belfast

A seasoned completion/well intervention/well test professional with 18 years of experience with expertise in sand control, intelli.

Sr. Geologist with strong project management experience

the position of Chemist and subsequently to put my contribution for the growth and development of the company by utilizing my best efficiency and skills and to achieve my further career advancement opportunity.

first class marine negineer

Strategic Business Driver and Results-Driven Leader

Experienced Principal/Senior Control Systems Engineer who can contribute significantly to your company.

20 Years experienced in Materials Mgt. specially in Procurement mgt.

This letter is to announce my interest for a position corresponding to my career profile: mining engineer.

I submit my application for the same.For the Eighteen years , I am working with Reliance Industries Limited Hazira Complex. During this period I was involved in setting up different laboratories , e.g.Water Laboratory,MEG Laboratory,PVC/VCM Plant Laboratory,Polyethylene Plant Lab,Polypropylene

MS in Petroleum Engineering, 20+ Years experience as Reservoir Engineer. Skilled in Reservoir simulation, Field Development Plans and Well & Reservoir Management.

25 years experience and Product knowledge

A highly qualified, Geologist / Mineral Exploration Analyst having extensive experience in mineral reconnaissance and exploration, geochemistry lab analysis, and statistical mapping earned with major employers in China, and for the past 6 years with De Beers Canada. As a Geological Engineer and Proj

Electrical and Power System Engineer with over thirty–one years of experience in the field of MV and LV power system related equipment.

A proactive and enthusiastic individual with 17 years of extensive expertise in the field of offshore positioning/navigation/geophyscial/pipeline/hydrographic survey.

Sailed for lasat 18 years on board Chemical, petroleum, OBO and Bulk carriers. Extensive experience on drydocking and repair yard. Completed conversion of a ship to FSO at Keppel Shipyard.

Sequence Stratigraphy, tectonic, pre/post-stack seismic attributes, petrophysic, static reservoir modeling, fracture modeling

I have 18 years experience in Oil & Gas Industry.Experience in completion execution: Completion activity and workover operation, Well Testing (Oil / Gas), Gravel Pack, Gas Lift, Submersible Pumps, Perforating Technique, Well Stimulation (Acid / Frac), Cement Squeeze Operation.

Process Engineer/Metallurgist/Consultant - Mineral Processing, Hydrometallurgy, R&D - MS, PE, 20-years operating experience; precious metals expert.

Senior Process and flow assurance engineer with full project cycle experience.

To secure a challenging Senior Management position within a progressive reputed organization, which facilitates professional growth and utilization of my architectural qualification and experience, while embracing new methodologies & strategies to remain competitive in the market.

Civil Engineer with 22 + years experience

HSE / Terminal Operations / Construction / Turnaround

I am a licensed Canadian engineer with M.Sc. degree and 28 years experience in Instrumentation & Control Systems (DCS&PLC) design, instruments specification (InTools), purchasing, commissioning, start-ups, maintenance, and training. In past twelve years I worked with major EPC offices in Calgary

Mining Engineer MBA, PE, 30 years international experience in precious metals management, operations, engineering, project development, construction, 5 mine startups.

I am an MBA with an engineering degree and over 18 years of experience in oil and gas industry across various disciplines like HSEQ management, offshore opeartions and construction projects. Currently, I am employed as the Head of HSEQ at a large organization.

First 1 2 3 4 [ 5 ] 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Goto Advanced Search...
Keywords: (e.g. mining engineer)		Find results with:

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out