Resume - A motivated self starter and team player/builder with 30+ years of Canadian and ...

Misco Jobs

Resume #65616

CONTACT INFORMATION:
If you don"t see contact information, please log in first.

Career History

Self Employed (1986 ¡V Present)
Independent consultant offering project management at the office or field levels both domestically (Canada) and internationally. The following outlines contracts and responsibilities I have undertaken.

Operations Superintendent
Verenex Energy Area 47 Libya Ltd, Tripoli, Libya
(07/2007 ¡V Present)

Promoted to this position to support the Drilling/Completions Superintendent and the Drilling/Completions Manager with the overall management of a 3 rig operation in Libya.
Duties included;
* Frequent visits to field to assess operations. Listen and react to concerns.
Develop go-forward plans.
* Promote safety initiatives and ensure safety compliance. Follow up on incidents/accidents
* Explain and ensure compliance with directives dispatched from office.
* Scouting of new locations.
* Report findings of field trips to management.
* Liaise with service company management and representatives.
* Assume roles and responsibilities of D&C Superintendent and/or D&C Manager as required. One or both roles almost each shift.
* Locate and assess locally available services, material and equipment for suitability.
* Assist D&C Engineer with programming, reporting

Drilling/Completions Engineer
Verenex Energy Area 47 Libya Ltd, Tripoli, Libya
(11/2006 ¡V 07/2007)

A start up Exploration company with first venture operations in Libya.
Duties included;
* The development of drilling and completion/testing programs for a 3 rig operation
(2 drilling, 1 testing) located +/- 400 km south east of Tripoli, Libya drilling wells to +/- 10,000 feet with multi zone testing programs.
* Researching and providing solutions for safety and operational concerns for drilling and completion problems encountered.
* Auditing of service company performance.
* Reviewing and developing a familiarity with active contracts.
* Maintain cost control information as well as drilling curves.
* Working with National personnel
* Assisting Drilling/Completions Superintendent with operational matters.
* Reviewing service company invoices.

Engineering done between wells 1 and 2 allowed the company to reduce drilling problems and reduced drilling days by 40%. Cost control measures allowed more accurate cost estimates and allowed forensic analysis for drilling and completions projects.

Drilling/Completions Consultant
Duvernay Oil Corp, Canada
(08/2005 ¡V 11/2006)

An aggressive medium sized E&P company operating in the "Deep Basin" area of North Central Alberta.
Duties include;
The safe and successful execution of multi-zone gas and gas liquids completions on HPHT wells with an average depth of 3200 meters and up to 7 zones.

Responsible for the safety and direct supervision of operations including;
* Logging and Perforating
* Fracture Stimulation
* Snubbing
* Coiled Tubing operations
* Slickline operations

Tasked with conducting completions operations on these wells "Rigless" to evaluate the economic and operational viability of doing the above noted operations without the use of a service rig.

Drilling Manager
Petro Vietnam, Algiers, Algeria
(03/2005 - 04/2005)

McGinnis, Codd & Associates (MCA) provided engineering services to both domestic (Canadian) and International operators.

Contracted by MCA to work in Algiers, Algeria in the capacity of Drilling Manager for Petro Vietnam during their onshore drilling campaign. Although the title of the position was Drilling Manager, overall responsibility included management of logistics and procurement, geology, engineering and operations.

Tasks included;
* Coordination and management of the aforementioned departments
* Presentations to management and their partners, Sonatrach
* Bidding, Analysis and Evaluation of services.
* Day to day management of rig operations to ensure that the program approved by management and partners was followed.
* Field operations troubleshooting.

Petro Vietnam successfully drilled and completed their minimum required wells (as per contract) during their first venture in to Algeria.

Drilling/Completions Specialist
Newsco Directional, Mumbai, India
(02/2005 - 03/2005)

Contracted by MCA to travel to Mumbai and Duliajan (Assam state), India to assist Newsco Directional in the preparation of a turnkey proposal to drill and complete a number of horizontal oil wells for Oil India.
Duties included;
* Evaluation of current production methods and their viability on a horizontal well application.
* Developing recommendations for production methodology of proposed horizontal wells.
* Well history and production data research.
* Assisting with locating services outside of India.
* Providing casing designs.

Drilling Manager
Centurion Energy/Maretap JV, Tunis, Tunisia
(10/2004 - 01/2005)

Contracted by MCA to work in Tunis, Tunisia as Drilling Manager for Centurion Energy and their JV partner, Maretap on their concession in Tunisia during the 2004 drilling campaign.
Duties included;
* Developing scope and details for proposed drilling prospects for onshore and offshore jack-up projects.
* Development of Request for Quote documents, technical and commercial analysis and evaluation of same

Detailed operations included;
* Preliminary site surveys
* Casing design and procurement
* Identification of pertinent applicable regulations
* Rig selection, assessment and procurement
* Drill string design, BOP design
* Operation cost estimates
* Drilling procedures
* Cement and mud design
* Recommendation and implementation of specialised technology
* Day to day rig operations management
* Preparation of interim and End of Well reports

Programmed a proposed 5200 meter well planned for drilling in 2006.

Drilling/Completions Consultant
Duvernay Oil Corp, Canada
(09/2002 ¡V 09/2004)

An aggressive junior E&P company operating in the "Deep Basin" area of North Central Alberta.

Duties include;
* The safe and successful execution of multi-zone completions on HPHT gas wells with an average depth of 3200 meters and up to 7 zones.

Responsible for the safety and direct supervision of operations including;
* Logging and Perforating
* Fracture Stimulation
* Snubbing
* Coiled Tubing operations
* Slickline operations

Business Analyst ¡V Software Development
Husky Energy Inc, Canada
(10/2001 ¡V 09/2002)
Contracted by Husky Oil to assist with the implementation and integration of a "Well Life Cycle" data capture and reporting software system.

Duties included;
* Auditing existing well data for inclusion into database
* Auditing application for compatibility with client requirements.
* Workflow analysis
* Data conversion analysis and testing.
* Auditing of troubleshooting documentation meant for end user.
* Preparation of test scripts
* Installation and testing of application on a variety of computers and operating systems.
* Training and troubleshooting with end users.

During initial roll out and 5 months following I was tasked with functioning as single point of contact for any and all field computer issues.
The software was successfully rolled out to +/- 70 drilling and completions field personnel with no major down time.

Completions Consultant
Northstar Energy/Devon Canada Corp.
(02/2000 ¡V 10/2001)

Provided field supervision of completion and workover operations on operated wells throughout Alberta. Assigned work on a variety of wells from shallow sweet gas to high pressure and critical sour.

Student
(01/1999 ¡V 01/2000)

Enrolled in a 9 month high intensity computer programming course and earned a diploma in Applied Information Technology.

Operations Manager/General Manager
Mercantile Peru Oil & Gas, Talara, Peru
(02/1997 ¡V 09/1998)

Moved to Talara, Peru to undertake duties as Operations Manager.
Responsibilities included;
* Building a team of production-oriented personnel to operate and optimize production from rod pumping and swab produced wells.
* Working in conjunction with a staff of 14 national engineers to develop reactivation, drilling and completion programs with a view to reducing costs and implementing engineering controls.
* Costs were reduced by up to 50 % and success rate increased by 25%
* Initiating and supervising the introduction of a computerized inventory system.
* Administering and organizing an 80 well reactivation program, 25 well drilling program and production facilities expansion for 1997.
* Supervising the development of technical requests for materials and supplies.
* Supervise the development of AFE's for drilling and completions projects.
* Developing a timeline for the importation of all required services and supplies.

Promoted to General Manager
Responsibilities included:
* Liaison with Government and Regulatory authorities.
* Preparing and administering of budget.
* Initiating the development and use of a computerized accounting system to better manage the business of the company.
* Develop professional development initiatives for administrative and operations personnel.
* Integrating the assets and personnel of another company into the existing company.
* Reducing operating expenses through staff rationalization and improved production controls. Initiatives reduced expenses by 30% within 4 months.
* Coordinating contingency plans, operating procedures, evacuation and health plans for
National and Expatriate personnel during the torrential rain and flooding caused by the
El Nino in late 1997 and early 1998.
o At the height of the rains, with 90% of the wells inundated, production was maintained at 50% of the pre-rain production. No equipment or infrastructure in the field was lost.
o No loss of life and no staff or their families suffered from the diseases prevalent during the crisis.
o Food, water, transportation and basic medical supplies were provided to a village of approximately 650 people situated within the operating area.

Completions Consultant
CanOxy Petroleum ¡V Yemen
(08/1994 ¡V 01/1997)

Supervised completions and workover operations on a rig in the Peoples Democratic Republic of Yemen for CanOxy.
* Responsible for rig, rig personnel, camp, camp labor and support personnel assigned to the rig and camp.
Duties included:
* Supervising the safe and timely execution of well completions and workovers.
* Assisting and problem solving of technical concerns during the planning of completions and workover projects.
* Training and monitoring of Yemeni Nationals in completion and workover operations.
* Developing and maintaining inventory controls.

Operations Superintendent
Czar Resources Ltd, Canada
(08/1993 ¡V 10/1993)

Undertook these duties as Operations Superintendent to allow the incumbent to take vacation.

* Preparing and submitting government forms for local and inter-provincial drilling and completion operations.
* Engineering and programming of drilling and completion operations for horizontal sour oil wells being drilled in remote locations.
* Engineering and programming of drilling and completion operations for directional wells being drilled.
* Preparation of Emergency Response Plans for sour drilling and completion operations.
* Procuring rigs and all support services.
* Maintaining 24-hour availability for all field operations.

Drilling Superintendent/Safety Coordinator
Czar Resources Ltd, Canada
(10/1993 ¡V 03/1994)

Undertook this dual responsibility role for Czar out of their offices in Fort St. John, B.C during the winter drilling season.

Duties included:
* Ensuring all personnel and contractors performed their duties safely and in accordance with current safety regulations.
* Conducting safety audits of field process and rig sites.
* Scheduling of regular safety meetings to promote safety.
* Providing technical support.
* Procuring services and equipment as required for on-going drilling and completions operations for;
„X Horizontal sweet gas wells.
„X Horizontal sour, oil and gas wells. (1% to 5% H2S)
* 24 Hour On-Call for all field operations.

Rig Supervisor
CanOxy Petroleum ¡V Yemen
(06/1991 ¡V 08/1993)

Rig Supervisor on a drilling/workover rig in the Peoples Democratic Republic of Yemen.
* Responsible for the care and control of a 50 man camp, all labor and support personnel including rig and support facilities.

Duties included:
* Supervising the drilling of large diameter surface holes and water wells utilizing hammer bits, stable foam and air.
* Conducting high rate flow tests utilizing Electric Submersible Pumps with complex downhole assemblies for accurate reservoir evaluation.
* Planning and executing Cased Hole Drill Stem Test work utilizing several tubing movement and pressure actuated valves.

Additional Projects

Technical Co-Writer
Winterhawk Petroleum Consulting Services
1989

Co-wrote a drilling manual for the Chinese National Oil Company.
* Used for the training of supervisory and rig personnel.
* Detailed the operation and maintenance of a drilling rig and all associated equipment.
* Written in non-technical English to facilitate translation.

Technical Advisor
Winterhawk Petroleum Consulting Services
1988

Technical Advisor during the production of a video outlining the prevention of oilfield theft.
* Used by government, police agencies and major oil companies.
* Goal of the video was to help personnel recognize and prevent oilfield theft.

Technical Co-Writer
Canadian Energy Research Institute
1986

Technical Co-writer of a comprehensive report presented by the Canadian Energy Research Institute.
* Written for the Federal and Provincial Governments
* Outlined the effects of oil pricing on industry employment levels.
* Used as a guide during the development of incentive programs for the oil industry.

Marketing Representative
Computalog Ltd.
1985

Traveled to Tripoli, Libya to assess markets and logistics for an Open Hole and Cased Hole logging operation in Libya.
* Marketed the services of the company.
* Presented technical overviews of available services to active operators.

1984
Sold completion and production logging units plus support equipment to Aramco Services, Saudi Arabia.
Duties included:
* Technical guidance during the fabrication and assembly of the units in Canada.
* Function testing of all units.
* Preparation and packaging of equipment and spare parts.
* Preparation and disbursement of all related paper work..
* Coordinated shipment of equipment from Calgary via Houston, to Saudi Arabia.
* Traveled to Saudi Arabia to assist with equipment checks.
* Instructed Aramco personnel on the systems and equipment.

Production Logging Supervisor
Gearhart International - Venezuela
1981-1982

Operated a wireline unit on Lake Maracaibo, Venezuela for Gearhart International.
Duties included:
* Preparation and calibration of well logging equipment prior to jobs.
* Collecting and interpretation of Production Log data for clients.
* Supervision of National personnel.

Production Logging Specialist
Computalog Ltd.
1978-1980

Collected data at the Research and Test facilities, Fort Worth, Texas.
* Maintained test facility.
* Analyzed quality of collected data.
* Diagnosed and trouble shot equipment failures.
* Developed production logging interpretation graphs and charts for use by the company.

EDUCATION

1987 - Certified Engineering Technician (Petroleum) - Alberta Society of Engineering Technologists
Awarded certification from this organization following an evaluation of the type and content of my work and achievements.

2000 - Applied Information Technology Diploma - Information Technology Institute
Earned this diploma following the successful completion of a 9 month high intensity computer programming course.

PROFESSIONAL DEVELOPMENT

Languages
* Fluent in Spanish language.
* Working knowledge of Arabic language.
* Working knowledge of French language.

Certificates and Training
* IWCF Combined Surface & Subsea BOP Stack ¡V Supervisor Level
* Second Line Well Control Certificate
* Well Servicing BOP Certificate
* Regulatory Awareness for Wellsite Supervision
* Safety Management for Wellsite Supervision
* H2S Alive Certificate
* Workplace Hazardous Materials Information Systems
* Transportation of Dangerous Goods
* Confined Space Entry
* Safety Oriented First Aid
* Ground Disturbance

1993 Level I Firefighting, Safety Boss
1986 Primary and Remedial Cementing, Canadian Fracmaster
Packer Completion Techniques, Guiberson Oil Tools.
1983 Introduction to Reservoir Engineering, CIM
1981 Blaster's Permits, Alberta and British Columbia.
1980 Production Log Evaluation, Gearhart Industries Inc.
1975 Radiation Handling Certificate, Atomic Energy Commission.
Completion Services Supervisor, Dresser Atlas, Canada

MEMBERSHIPS
Society of Petroleum Engineers (Associate)
Alberta Society of Engineering Technologists

REFERENCES
Available on request.

«« previous resume

next resume »»

Search Results (Resumes 6901 to 6950 of 15509)

Go to Search Parameters...

Brief Description

Electrician

PLC,SCADA

AutoCAD, ProE,

Materials expertise, inventory,issue and received handler

Iam Diploma Holder in Mechanical Engineering and having 9 yrs of oil and gas experience.Maintenance and construction experience.Both as a technician ans staff level coordinated activity

Sales chemical engineer

Bs in Petroleum engineering , field engineer

Reliability engineer, plant engineer, manufacturing engineer, expert in kiln and ball mills, hydraulics pneumatics

DRILLING ENGINEER, EXPERIENCE - 4 YEARS IN OIL FIELD AS DRILLING ENGINEER

Free! A motivated self starter and team player/builder with 30+ years of Canadian and International upstream oil industry experience. Skilled project manager and problem solver. High level of computer literacy.

I having more than 9 years of experience as a Piping Designer PDS in the field of Oil and Gas (Offshore /Onshore), LNG, Refinery and Petrochemical Industries

Mechanical Engineer - Maintenance / Planning / Project - 13 years of experienc.

Geological and Geotechnical Core Logging for Exploration drill core and Mining. Have experience Training and Supervising technical staff in this field.

Creative, tenacious, analytical, result-oriented professional with proven success in streamlining procedures, managing projects, analyzing products or processes, and increasing department efficiency through effective business strategy. Seeking admission to be as world class Quantity Surveyor

Geologist/geophysist (seismic processor) was working in WesternGeco (Schlumberger) for 16 months.

Seeking for challenging and rewarding opportunities in a dynamic and reputable organization where mutual interests and achievements will be maximized.

I have completed Mtech in applied geology,i can do mining plan in iron ore,core logging,quality control of ore,

I have HND in Building Technology. I also have good knowledge of AutoCAD. I had been involved in construction work at different capacities.

I have and engineering management degree and currently in an MBA program , and will be through this quarter. Very proficent in MS project tool, MS office tool, minitab

A high skilled Well Test Engineer.

Architecture CAD Drafter

I hold a Bachelor of Science degree in Sociology, my core competencies are Administrative and Human Capital Development, Relationship Marketing, Business Analysis and Development.

I would like to apply H2S Technician or others position suitable at your company. I had been 10 years experience in geothermal industry since 1994 trough 200

I'm a qualified red seal mechanic, done courses on drill riggs and are a qualified blaster and magazine master. I've done the Make Safe and Health Course. I was Site Manager for a Drill Company, blaster and drill rigg machanic for the past 6 years.

Piping design engineer

I have 10 years experience in the oild industry. 5 years as driller and 6 months as Relief Tool Pusher. I amready to go to work as soon as possible. I have my current Well Control and Passport. I have H2S training, Fall Protection, & First Aid

Petroleum Lab Tech

Title Research; Sovereignty to present

I am Petroleum Geophysics MSc Student at Imperial College London.I have a background in Physics and skills in the use of RocDok,SMT,Claritas Globe,Matlab and Petrel softwares.I also have good and effective communication skills,excellent report writing and presentation skills.I am a good team player.

Experienced project manager in landscape sectors, 25 years practical management experience in commercial and residential fields including high-end, M.Sc. and B.Sc. horticulture, M.B.A. pending

pi[ping eng 3+ experience

Currently seeking a “Drilling Operations” position , internationally within the upstream petroleum industry

Peoplesoft Technical Consultant

Quantity Surveyor

Land Surveyor

Mineral processing engineer, metallurgist, flotation, copper, sulfide ore, molybdenite, milling, flotation test

I have been working in the mining industry for over thirteen years. For the last 5 uyears I have been working as a Jumbo Operator. I also have extensive expereince in Tele Remoting, Bogging and all aspects of develpmental mining.

Have 10 years experience in Majour Industrial Steel Processing Plant in Saldanha, South Africa doing Hydraulic maintenance. Have been doing all buying and selling and sourcing of goods over internet. Also went to site to do job estimations and Representative work. Did Offshore Survival course

Petroleum Engineer (B.Tech- PE) with 4 yr of Exp : Exp in Reservoir Modeling, Production Modeling, Integrated Asset Modeling, Gas Lift Optimization, Workover, MBA, DCA, Stimulation and Reservoir Studies

Highly self motivated and goal-oriented professional committed to pursuing a long term career in petrochemical / chemical industries. Has 11-year experience on maintenance, repair and routine calibration, with strong analytical and problem solving skills, on analyzers.

A self-motivated and task-oriented Chemical Engineer with 10 years experience and proven track record working in the manufacturing environment of an MNC.

Diploma in Civil Engineering,Civil QA/QC inspector

Seismic Data Processing QC, Supervision and Management experience. International experience in Northa nd South America and Europe. Experience with artic data, high-resolution surveys heavy oil suveys, shallow water, TZ, and complex over-thrust data.

Mechanical engineer, qa qc engineer, construction engineer

Mechanical Supervisor in construction & maintenance of mineral processing plants. From primary crushing thru to gold room or concentrate loading,have extensive experience with installation of SAG & Ball mills, ex-pat in Ghana, Tanz,Thailand, and all of Australia

E/I SUPERVISION for construction , commissioning of Oil & Gas processes

„« Reservoir Engineering, fluid property analysis, pressure transient analysis, reservoir characterization, reservoir management, and good knowledge of production optimization (managing wells), and understanding of surface facility issues.

+15 years experience pulling ,running and comissioning ESP completions world wide. Run life development etc

Electrical Engineer, Automation and Controls Dessign, Testing and Commissioning Engineer, Project Engineer, Support Engineer

Masters degree in Civil/Structural engineering with more than 9 years experience in Oil & Gas projects for prestigious clients. Have about 7 years experience on Canadian projects including modular engineering (lifting, transportation analysis). Proficient in US, Canadian and Indian Codes.

First Prev 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 [ 139 ] 140 141 142 143 144 145 146 147 148 149 150 Next Last

Seach Parameters


Goto Advanced Search...
Keywords: (e.g. mining engineer)		Find results with:

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out