Resume - Electrical Maintenance Engineer With over 30 years of experience in providing se...

Misco Jobs

Resume #66004

CONTACT INFORMATION:
View contact information...

OBJECTIVE:
------------
To go beyond here and challenging the horizons of the Oil &
Gas industry in providing benchmark services.

To meet the need of your company that is looking for a Change & Improvement to happen through enthusiastic and ambitious people, with a flair for good communication and awesome attitude.

And at the same time, an amalgmation of core competence and experience in technology to assure reliable and prompt solutions.

With a passion to work and promise to self for career growth & to deserve the best, from a company that does its part to build better environment for the dynamic professionals.

WORK EXPERIENCE:
------------
Working as Chief Electrician in Jack-up Rigs with PLC controlled ACSCR system (Aban VI & Aban VII) owned by ABAN OFFSHORE LTD. (1Year)

Worked with Oil & Natural Gas Corp. Ltd (Oil major of India) in different capacities holding responsible positions for 26 years as mentioned below;

As Maintenance in-charge for Deep Drilling Land Rigs

Servicing of DC Motors & Generators
ACSCR Panel maintenance
DC-DC Panel maintenance
AC motors maintenance
AC Panel maintenance
Top-Drive maintenance

As Maintenance in-charge for Process Plants
Both Offshore & Onshore
Servicing of HT Motors
Turbine-Generators
HT AC Panel maintenance
Repair of HVAC Units
VFD Panel maintenance

As Engineer-in-charge
Execute projects including installation of new rigs.
Execute maintenance contracts
Execute electrical equipment Servicing contracts.
Procurement of electrical equipments
Vendor development
Inventory management

Worked in Training institute of ONGC Ltd (School Of Maintenance Practices, Baroda) as Training co-ordinator & Faculty for Switchgear maintenance and Electrical safety

Worked as maintenance engineer in Piston-Ring foundry of GOETZE (I) Ltd. (2years)

Worked as Apprentice engineer in Bhakra Power House (1year)

PROFESSIONAL EXPERIENCE

As Management professional for manpower and inventory control.
Organized maintenance team and supervised Inventory for repair & maintenance activities through material management systems ensuring consistent flow of material.

Performed the responsibility of inventory control, quality assurance and quality control. Administration of the computerised Maintenance Management System, repairs, certification and classification requirements.

As project engineer for installation and commissioning of new drilling rigs and various developmental works related to plant or rig through contracts following the works & contracts procedures.

Proactive leader with expertise to trouble-shoot, implement change and quality control while maintaining safe and productive environment.

As training coordinator for trainings on LV & HV switchgear, Oilfield equipments, DCS & PLC controls, electrical safety etc. Conducted trainings on HT Switchgear Maintenance and Electrical Safety in ONGC, Baroda (India) & GNPOC, Khartoum (Sudan)

EDUCATION & CERTIFICATION:
------------
Highest Education: B E (Electrical) 1976
Institution: Thapar Institute of Engineering,
Patiala -147001 (Punjab-INDIA)

ADDITIONAL INFORMATION:
------------
JOB PROFILE
Started my career as Apprentice engineer in Bhakra Power House (1977-78) and later joined Goetze (I) Ltd, Bahadurgarh (Patiala) as Electrical Engineer for its foundry & machine shop.(1978 to 1980) (3 Years)
Joined ONGC in August 1980 as Assistant Executive Engineer (Electrical) and risen to the position of Chief Engineer (Electrical). Obtained experience in different and difficult environments like Rajahmundry (AP), Assam, Mumbai (Offshore), Ankleshwar, Mehsana & Baroda. (26Years)
Joined as chief Electrician on Jack-up Rig Aban-VII (1Year)

TRAINING PROFILE
ACSCR Controls Hill Graham Controls, UK
Drilling Rigs IEIP, Ploesti, Romania
Flameproof Equipment CMRI, Dhanbad,
Oil Field Equipment BHEL, Hyderabad
HT Motors BHEL, Bhopal
HV Switchgear ABB, Baroda
HUET Survival Systems, Mumbai
STCW TS Rahman, Mumbai

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1051 to 1100 of 15497)

Go to Search Parameters...

Brief Description

Certified Production & Inventory Management professional

Result-oriented leader with more than 20 years experience, intuitive manager with a strong technical attitude, self-confidence and change catalyst, specialist with experience in TQM, process improvements and process mapping.

25+ years experience in electrical/control system design for the petrochemical industry. Additional three years experience in civil engineering. Experience has included electrical/instrumentation design to NFPA, NEC and ISA standards, field engineering, as well as managerial experience and CAD.

B.SC. ENGINEERING, PROACTIVE TECHNIQUE,ISO9001:2000 & HSE

17 years in procurement, project management, planning

Ihave varied U/G experience as a Supervisor and have honed my communicative skills, with a constant focus on regulatory compliance.

Drilling fluid superintendent / supervisor ( mud, cement, waste management)

Project management executive with experience in project management, coordination, planning, monitoring and controlling projects.

I am a knowledgeable Mechanical/Piping Designer with Project Engineering experience, capable of increasing degrees of responsibility.

Over 14 years of professional experience, including 8 years working for a multinational Fast Moving Consumer Good companies, Involved in various assignments, focusing on HR Recruitment Strategy, Competency Assessment and Performance Management Systems Design, Organization Design and Development, and

electrical/mechanical superintendent/ project manager

Civil Engineer with 17 years experience

I have twenty five years of piping design, 10 years of project leading with in the piping group, shop fabrication & field construction c/w PDS & AutoPlant soft wear experience. I have US work experience & posses a valid Social Security card.

Offering more than Fourteen years of Experience in Marine, Offshore, Oil & Gas Industry with a wide variety of projects involved in Electrical & Instrumentation Disciplines. Acquire extensive knowledge in a broad range of Computer programs & other Various E & I Engineering Field

Chief Finance Officer of Group having One Islamic Investment Bank in Dubai and Asset Mangement Company in Malaysai,

Expert in managing conglomerates and applying strategic planning and control instruments

Instrument / Controlsystems Engineer

Driller / Tool Pusher (Onshore / Offshore)

Geologist geophysicist interpretation

EPCM Project Contracts Interface (Client-EPCM-Subcontractors)

Emergency Management professional with 28+ years of combined experience; managing teams, providing technical expertise and leadership in programs, projects, operations, and training; in both Fire Services, Training Academy’s and the Petrochemical Industry

Electrical Maintenance Engineer With over 30 years of experience in providing services and solutions to electrical maintenance and Training & development etcin the engineering and Oil & gas industry.

To obtain a challenging position with an engineering firm where I can use my relevant skills and experienced as Interface Design Coordinator / AutoCAD Supervisor and be a contributing member in the growth of the company. Willing to work as a key player in challenges where I can put my committed atti

My professional education has been in the field of Ag. Economics, commodities trading and along with strategic planning and leadership. Abilities that applied in my past in more than 16 years of executive management in agribusiness management and high governmental level positions,

I am capable of achieving organisation¡¦s objectives and organic growth through effective contributions. I have over 13 years of experience in the areas of Health, Safety & Environment Management

Safety Manager/Director - risk management

Maintenance Supervisor/Security, Maintenance Supervisor/ I&C, Project Manager

Civil Engineer. Formwork Specialist. Experience: 14 years. Mounting, Scaffolding, Precast Concrete.

20 years fire fighting experience.Now working in ADNOC Off Shore facility

hv construction,power plant construction,locomotive maintenance,supervisor,general electrical maintenence

Overseas experience in Mineing and Oiland Gas in Maintenance Management

Having 23 years of sound experience in piping and equipment design for Onshore / Offshore Oil and Gas, Petrochemical and Chemical Industries.

24 Years of experience in Piping/ Pipeline Design Engineering for Oil & Gas of Onshore and Offshore facilities.

Experienced land professional with a strong background in all phases of petroleum land management. Proven expertise in a variety of situations, as well as proven leadership skills as demonstrated in Land Manager positions with two companies and as an independent lease broker utilizing the services

Structure designer is make development basic design from engineer to make engineering drawing with make details, sections, connection types and discuss with other department like piping, civil, mechanical etc to make problem solve in engineering design or site.

Fujitsu LV-III Installer, OSP Field Engineer, Structure Cable Lead Installer, Fiber and Copper Splicer, Network Tech, Antenna Tech

Mechanical engineer for heat exchanger, package, boiler, fired heater, fabrication, HTRI, compress

25 years Petrochemical / Oil Process Operations Including 10+ years in Supervisory / Man Management positions Commissioning and Start-up Assignments (Overseas)

Self-motivated, results-oriented professional with extensive international experience with multinational firms and government-owned facilities in the construction, shutdown, and refurbishing of oil, gas, petrochemical, and power facilities and plants.

Team Leader Const/Maint. Oil/Gas Ind.Experienced in planning/execution of projects ,procedures , method statements , permit systems , progress rep. , reviewing change orders, QA/QC and HSE standards. Running multicultural workforces coordinating disciplines and subcontactors.

PhD in Mechanical Engineering with emphasis on Materials and Metallurgic Engineering. Special knowledge in Surface Technologies, especially Thermal Spraying. a German citizen with Permanent Resident Status in Canada.

SENIOR PROFESSIONAL ENGINEER OF 30 YEARS DIVERSE EXPERIENCE

Over 20 years of extensive experience as an international consultant. Provider of structural software for the analysis and design of concrete & steel according to ACI, AISC & API codes of practice. Expert in; structural systems & forensic investigation. Professional in; STAAD III & MS office Suite.

Participates in inspection of Gupco’s R/Sh facilities to provide adequate advise on corrosion matters, especially MIC problems

Petroleum Geologist, having more than 22 years of experience. Presently working with Oil And Natural Gas Corporation Limited, India at Mumbai. Well versed in both development and exploration of hydrocarbon.

Wellsite geologist , Operation geologist ,The work is entirely based on a rig where the work activities during exploration and appraisal drilling projects are typically undertaken

Base metal and Gold extractive metallurgist, General Mill foreman. Non metallic project manager. Training and multilingual communication abilities.

Graduated in B.Eng civil 1976 and Post grad Hydraulic in 1982, total 28 years experience in civil, infra such as steel, timber, road, car park structures and sewer and pipe laying as well as tunnels and pipe jacking works.

Over 14 years E & P and Service Industry technical experience with proven records of project deliverables. strong technical background as a Geoscientist, i.e.; Production and Development Geology, 3D reservoir modelling, Integrated Field Development study & Field Reviews.

Diploma in Nature Conservation ( 5 years); Certificate in Environmental Biology (1year); atriculation Certificate (with exemption)

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 [ 22 ] 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Goto Advanced Search...
Keywords: (e.g. mining engineer)		Find results with:

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out