Resume - I have experience in handling personnel working on distribution lines. I can eas...

Misco Jobs

Resume #67039

CONTACT INFORMATION:
View contact information...

OBJECTIVE: To contribute my skills to the company that offers opportunities for growth and enhancement of skills.

WORK EXPERIENCES:
COMPANY: Digital Telecommunications Incorporated Cainta MSU
Head Office: 110 E. Rodriguez Jr. Ave., Bagumbayan, 1110 Quezon City
POSITION: Power Engineer / Technician
March 1, 2005 - Present

DUTIES:
„h Testing, Calibration and troubleshooting of all generator sets of different rating capacity and Automatic Transfer Switch ( ATS ).
„h Handle power system operations of Onan ¡V Cummins and Kohler generator sets
„h Operation and maintenance of Ericsson power equipment's such as rectifiers, power interfaces and back up batteries of Main Subscriber Unit Switches ( MSU ) and Remote Subscriber Unit Switches ( RSU )
„h Knowledge in DC Power, power commissioning, battery discharging, installation of rectifiers and inverters
„h Monitor and perform preventive and corrective maintenance of all equipment within the jurisdiction of power systems
„h Operate and maintain power facilities including on buildings, perimeter and tower lights.
„h Rendering service on a 24-hour on call duty/service when power system failure occurs
„h Installation and commissioning of Digital Subscriber Line Access Multiplexer ( DSLAM )
„h Asymmetrical Digital Subscriber Line ( ADSL ) installation and configuration.
„h Preparing monthly accomplishment reports
„h Participate in expansion of RSS/RSU if service demand arises
„h Coordinate with outside plant personnel concerning cable problems and subscriber lines.
„h Perform on site troubleshooting, testing and replacement of AXE-10 equipment such as Line Switch Module, magazines, SLCT, Power boards and the likes.

COMPANY: MIESCOR Builders Inc.( a subsidiary of MERALCO )
Meralco Industrial Engineering Services Corporation Builders Incorporated
#283 Katipunan Ave., Loyola Heights, Quezon City
POSITION: Team Leader / PCD, Dasmarinas Sector, CMR - Distribution Division
December 2003 - Present
POSITION: Project Supervisor - PGI - Tiwi, Albay, 13.8KV Distribution Project
September 2003 - November 2003
POSITION: Team Leader, Valenzuela & Balintawak Sector, CMR - Distribution Division
January 2003 - August 2003
POSITION: Electrical Engineer I / Field Engineer
October 2002 - December 2002
DUTIES:
*Surveying and Inspection of work areas, preparation for the execution of projects and to adhere to safety practices and work procedures.
* Report any Deteriorated transformers, faults on Primary & Secondary Distribution lines, including Rehabilitation of Substandard wires, cables and metering devices.
* Routine inspection of Lineman tools, Personal protective equipment (PPE) in field as well as in the office.
* Supervision of Pole digging, hauling and erection, Installation of Transformers and Line attachments, Energizations of Line works,
Installation of Primary and Secondary lines.
*Planning of line power interruptions and supervision of line works.
*Scheduling of priority projects to maximize the capability of workers and usage equipment.
* Planning of Line power interruptions and field supervision upon execution.
* Conduct a weekly / monthly toolbox/ safety meeting.
* Coordination to client upon daily, weekly and monthly project accomplishments.
* Conduct a routine Inspection of completed work orders in compliance to
Meralco Construction Standards.
* Responsible for preparation cost estimate, construction planning, scheduling, analysis and monitoring of project accomplishments such as direct and indirect labor, equipment cost including depreciation of equipment and field overhead.
*Preparation of Maintenance Work Report regarding Line Troubles, causes of Force
Trippings and report updates on Data of Transformers current location.
*Preparation of Single Line Diagrams of a certain circuit.
ON THE JOB TRAINING:
COMPANY: AVC Engineering Services
POSITION: Electrician ( Contract Basis )
PERIOD: June 1997 - June 1999
DUTIES:
*Wiring installation of buildings with regards to its light and power system.
* Wiring installation of window type ACU 1Hp, 1 - phase, 230V
* Wiring installation of 2Hp, 1 - phase, 230V electric motor for Water Pumps
* Prepare wiring layouts to be wired and estimates electrical materials and wiring devices to be installed.
* Secure electric wiring permits for buildings to be installed.

EDUCATIONAL ATTAINMENT:
TERTIARY:
Bachelor of Science in ELECTRICAL ENGINEERING
Polytechnic University of the Philippines.
1996-2001
SECONDARY:
Marikina Institute of Science and Technology
Sta. Elena, Marikina City
1992-1996
PRIMARY:
Parang Elementary School
Parang, Marikina City
1985-1992
SPECIAL SKILLS:
* Computer Literate - ( Windows, Word, Excel, AutoCAD 2004,
Powerpoint, & Internet Explorer )
* Electrical Wiring Installation & Troubleshooting
* Drafting

ACADEMIC PROFESSIONAL QUALIFICATION:
Registered Electrical Engineer
( June 2002 ) Reg. No. 29851
Registered Master Electrician
( November 1999 ) Reg. No. 22054

SEMINARS / TRAINING'S:
Nov. 13 - Dec. 23, 2004 AutoCAD 2004
Meralco Foundation Institute - Engr. Darius Villaribba
January 26 - 29,2004 Refresher Course for Network Supervisors(Batch 25)
Matatag Room, Lineman Training Camp, MERALCO Ortigas Center
Topics included:
Distribution Transformers - Engr. Jaime M. Escobia
Switching of Specialized Equipment's -
Stringing and Reconductoring - Leonardo M. Cruz
Non - Technical System Loss - Engr. Romy Salita & Engr. Tony Yacapin
CMR Practices and Standards - Engr. Vic Orga
September 2000 Motors, Motor Circuits and Controllers
September 2000 Preventive Maintenance of Electrical Equipment
September 1999 Power Distribution System
September 1999 Philippine Electrical Code (Part 1)
September 1999 Motor Control System
AVR Room, 4th flr. PUP - College of Engineering and Architecture

ORGANIZATIONS ATTENDED:
2004 - Present Institute of Integrated Electrical Engineers
Monte de Piedad St., Cubao, Quezon City
1996 - 2001 PUP Student Credit and Service Cooperative
PUP, Sta. Mesa, Manila
1999 - 2000 4th Year Electrical Engineering Representative
College of Engineering, PUP, Sta. Mesa Manila
1999 - 2001 EEN - IIEE Member
College of Engineering, PUP, Sta. Mesa Manila

PERSONAL REFERENCES:
Will be provided

PERSONAL INFORMATION:
Age: 28
Birthdate: September 6,1979
Civil Status: Married
Weight: 72kgs.
Height: 5' 6"
Citizenship: Filipino
Religion: Catholic

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 7851 to 7900 of 15487)

Go to Search Parameters...

Brief Description

Highly motivated and intelligent, with sound commercial ability and well developed analytical skills. A proven self starter, creative and co operative team player with the drive and ability to work in challenging environments.

A highly motivated person willing to work my way forward. experienced and eager to learn, most of all I am willing to learn.

OBJECTIVE: A position as an Environmental, Health and Safety Manager.

I have been in electrical construction for 12 years, 3 years in management of electrical construction. I am interested in working overseas for short or long term projects. Please call with any interest.

I am working in Power Plant from last 12 Years as a Instrument and Control Technician.

High Energy, trustworthy, successful, experienced, Senior Director of Credit, Collection, Accounts Receivable, Customer Service, AR Business System management, Operations and Administration looking to partner with talented, growth oriented company, on a temporary, contract or direct basis.

Strong Skills in Reservoir Monitoring & Surveillance coordination though team work integration for Gas & Water Secondary Recovery Projects. Reservoir definition & delineation through well data collection. Development Plans to assure production profiles requirements. Gas & Water Conformance.

12 YEARS EXPERINCE IN CIVIL/STRUCTURAL ENGINNERING EXPERIENCED IN USING BS AND US STANDARDS. POWER PLANTS, OIL AND GAS, DE-SALINATION PLANTS, SUB-STATIONS, SVC PLANTS, TANK FARMS, AND VARIOUS OTHER INDUSTRIAL STRUCTURES.

MS in Civil and Environmental Engineering Experiences: Water/Wastewater Engineering; air pollutant control project Skills: pilot study, mechanical attitude, project management, data analysis, report writing and presentation, various computer software packages

To lead a team involved in the drilling activities of a growth oriented oil and gas servicing company.

Rover operator

At present I am working as a SAFETY OFFICER with an EPC contractor doing construction of double wall LNG tanks in Qatar .

Marine Maintenance Supervisor & Machinery Watchkeeper

Contracts Engineer, Cost Engineer, Quantity Surveyor

Resutls-Driven Structural Analysis Engineer

I am an electrical Engineer having experience in Power and process Plant, control system, planning,design and execution etc.

Graduate Civil Engineer working as Senior Quantity Surveyor with over 13 years of experience in construction industry ranging from Bridges, Highways and Building structures. I have also been designated as a Certified Cost Engineer by the AACEI in October 2008. Well versed with FIDIC, CESSM3 & POMI

I have experience in handling personnel working on distribution lines. I can easily adopt to work environment related to Electrical Engineering.

Combined experience in design and construction

Core Logging, Bore Hole Logging, Rock Identification, Reserve Estimation & Calculation, Liasioning With Govt.

HND Architecture, PGD Architecture, MBA

Security Manager. Coordinator. Instructor

Graduated in computer science subject

Experience in Engineering, Exploration and Environmental Geology. Advanced First aider, Defensive driving and Incident Manager. Well adapted to site safety with skills to implement site safety

Expert in computer application packages, Good leadership skill, Microsoft Certified professional. Commendable human relationship

Tangible experience in crushing, screening, HMS, dewatering, coke making and Gas cleaning. I am a holder of a brilliant BSc (Hons) Degree in Metallurgical Engineering. Being a good communicator, I am a very dynamic, self motivated and analytic team player who is result oriented.

A pioneering, professionally qualified and hard working Graduate Quantity Surveyor narrowed towards achieving goals in a competitive environment

CV of Chemical Engineer (B.Tech.), Experience in Process Chemical Plant

Environmental geology on 2009.I am seeking for a volunteering job in geology immediately as i have enough free time.I

I have work for the every and each department of Construction and Engineering; Please refer to my CV all details ;

DIPLOMA IN MECHATRONICS Engineer

all kind of barge handling,maintanence,movement,anchor handling,loading,offloading the heavy equipments,maintanence of engines,generators,pumps,winches,motors,etc

geophysical engineer

Diploma in Civil engineering, Experienced in Architectural drafting, Detailings in Autocad, Site supervisions, Experience of 7 years in similar field.

I have done my Diploma in Mechanical Engineering.I have experience is more than one domain in the Engineering,such as Production supervisor,Production Technician and drafter as well.

Dipolama in mechanical engg Pro/Engineer/Autocadd/Soildworks

10 years of experience in oil and gas industry. Experience in mud logging and working on service rigs. Extensive experience in planning and executing well completions, drill stem tests(Open hole and cased hole), rig and rigless intervention; Artificial lift; budgeting, tendering and evaluation

Field Investigation, sample collection, Watershed protection study, Groundwater management, Maps, Cross-section & Report creation

Senior PDS and/or PDMS Structural Designer. Experience in all aspects of design; from conception of design (FEED), layout work to detail design in the Oil and Gas (onshore/ offshore), Refinery/Petrochemical plus Power Generation industries for EPC&M companies in Europe, Asia and Australia

IT Manager

I am a civil engineering diploma holder with 8 years exp.in high rise residential and commercial buildings.

Several years of experience in CAD drafting in wood carpentry including 10 months work in Middle East, at present I work as Bulk Handling Design Engineer in a European company, part of my work is to design bulk handling system of cement cargo ship and supply vessels including loaders and unloaders,

Diploma in Electrical and Electronics Engineering ¡V 3 Years

I am interested in continuing within electrical, instrumentation and administration or even any place related because I am flexible to learn, and make myself marketable in the industry and commercial, etc. I have excellent skills and strong sense of environmental and safety issues.

Strong in mechanical,electrical and plumbing.mobile or fixed equipments or engines are my categories where I am efficient as a hard worker, innovative, result oriented

Dual Trade mechanical fitter, steel fabricator, welder with supervisory experience. I have a keen in safety and have been a safety supervisor on jobs before.

Ihave an experiece of more than two year in desiginig of heat exchager and pressure vessel in an oil and gas fied andmy objective is to work with an organisation that can utilize and sharpen my skills in Mechanical design(pv elite software), Thermal design, Process design

I am an highly versatile and enthusiastic individual. Self motivated with a confident, friendly and sociable personality.I'm a supportive team member who also works well on own initiative.I am able to work under pressure and prioritise heavy workloads.

Piping design an stress analysis

December 2008 graduate of Texas A&M University with a degree in Petroleum Engineering. I am seeking full time employment as a Petroleum Engineer in the oil and gas industry. Please find my resume attached to this email, I look forward to speaking wit

First Prev 151 152 153 154 155 156 157 [ 158 ] 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 Next Last

Seach Parameters


Goto Advanced Search...
Keywords: (e.g. mining engineer)		Find results with:

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out