Resume - Graduated Mechanical Engineer,Certified Caterpillar Engineer, Experience as a Fi...

Misco Jobs

Resume #71289

CONTACT INFORMATION:
View contact information...

Nationality Dutch

CAREER GOALS

Seeking a challenging position requiring demonstrated skills in leadership, planning and communication, thus utilizing inter-personal skills with my experience, educational qualifications and technical knowledge.

PROFILE SUMMARY

* 15 years of experience in maintenance in industry, mining, offshore oil, power generation Diesel and Gas Engines Caterpillar
* Exploration, petro-chemical process plants, dredging projects and commissioning upstream gas process units.
* 3 years solid experience in projects in the mining industry in Australia.
* Exposure to plant operations, production, planning and management skills.
* Leadership skills in motivating others and building a real team spirit.

ACADEMIC CREDENTIALS

* Further planned studies for 2007 to 2009: BSC Energy Management study at Ellis.
* College (NEW YORK INSTITUTE OF TECHNOLOGY) Online Study (starting summer 2007).
* Graduated with BSC Mechanical Engineering Almeda University USA in September 2006.
* Graduated Balga High School in 1985, Perth, W.A. Australia. I completed year 12 with physics, mathematics and chemistry as main subjects.
* 4-year apprenticeship diploma as Diesel Hydraulic Mechanic in Western Mining Corporation, including a 1-year study in the College of T.A.F.E. (Technical Adult Further Education) in Australia Year 1989.
* 1 year Steam Utilization Engineering course provided by Spirax Sarco Ltd. England.
* Course in computer education and application. Year 1997.
* ROVC Technical College in Amsterdam completed a Maintenance Management Study
Provided during my employment with General Electrics. Year 1998.
* Automatic Power Control System course provided by Spirax Sarco Ltd. England.
* Hot Water Treatment course provided by Spirax Sarco Ltd. England. Year 1999.
* Computer courses, Lotus Notes, Windows, Electronic software control program's, PLC systems. Year 2002 to 2005.

TOP CAT TRAINING:
Electronic technician, 3161 regulator/governor, electronic controls, Service Information System (SIS), 3500 series – troubleshooting, T.A. (Technical Analysis), HEUI Injector Systems, MEUI Injector Systems, TESTO analysis for gas engines, trouble shooting C Series, Marine & Industrial Engines, 3412E, 3176, 3196, 3406E, 3516B, 3606,3608 Marine & Industrial Engines trouble shooting, Certified Caterpillar Marine Analyst, Capstone Micro turbines, Caterpillar Gas Engines, G3400 & G3500 Series, and the 3520 1.3 MW, Gas Engine/Generator set.

OTHER PETROCHEMICAL EQUIPMENTS EXPERIENCE:
Worthington Turbines. Regenerative disc friction pumps, compressors, Heat exchangers, reactors, coolers, and sundyne pumps.

EARTHMOVING EQUIPMENT EXPERIENCE:
Caterpillar range of Excavators, loaders, graders, Volvo EC range of multi tasking Construction equipment, Tamrock CHF1000 and Atlas Copco Rock drilling rigs, Ingersoll rand DM range of Rock drilling equipment

SAFETY TRAINING:
HUET training (Helicopter Underwater Escape Training), NEN3140 Electrical Safety training. Dutch VAC Basic Safety Training, and Certification, Underground rescue and survival training certification in Australia. Attended many seminars and safety courses. Fire Fighting training and Fire Escape training at the DHTC Institute in Den Helder, located in The Netherlands, Europe.
NBC (nuclear & biological protection training at KBR Houston).
OSHA Safety Training, TSTI, procedures at US Base camps.

WORK EXPERIENCE

Present Employment:
TFSI (Technical Field Services International)
Suit 8, La Tourgand House, Lower Pollet
St Peter Port, Guernsey

Project 1: June - August 2007
Technical manager for the joint venture dredging project of Boskalis and Jan de Nul
Location: Soyo Angola, Congo River, Angola LNG.
Project: Dredging and reclamation project on the Congo River for Chevron Petroleum Ltd.

Duties:
* Head of the technical department;
* Managing local contractors and staff;
* Purchasing all the fuel requirements;
* Scheduling maintenance procedures for all marine equipment;
* Finding local resources;
* Working together with the HR-department to recruite staff.

Biggest achievement: Due to lack of watersupplies which was a crucial necessity for the project, through my local resources and contact I discovered the Zaire Waterworks located in a village called Mpindi and I was able to secure a reliable source of supply of water for the whole project.

Project 2: September 2007 - present
Commissioning engineer for Frames (www.frames-group.com) in Nigeria for Shell.
Refurbishment of the Utorogu and Oben Gas plants.
Location: Warri Nigeria Delta State.
Project: Installation of new Glycol de-hydration units, water bath units.
Installation of UCP system Hima Elope 2 Software Systems.

Duties & Achievements:
* Development of high level and detailed pre-commissioning, pre-commissioning, start-up sequence plans based on block flow diagrams, PFD's, P&ID's and electrical one line drawings.
* Development of detailed pre-commissioning, commissioning and start-up packages and start up staff (local contractors).
* Development and specification of pre-commission, commissioning, and start-up materials/chemicals (skillets, gaskets, studs, bleed rings, purge rings, nitrogen, etc), tools (torque wrenches, etc) and equipment (black start-up generators, black start-up air compressors/dryers, lighting plants, etc).

Kellogg Brown Root (KBR), Houston, Texas, USA
January 2007 – April 2007. Prime Power Caterpillar Generator Foreman (Engines)
Location: KBR Camp Lemonier, Site 4, US Base in Djibouti, Africa
Duties:
* I was responsible for the Caterpillar Engine Prime Power Generator Units at Prime Power.
* I organize the job planning, maintenance procedures, troubleshooting, and overhauls of power generation Units at Camp Lemonier Djibouti Horn of Africa.
* I lead a small team of local and international mechanics and train them to the Caterpillar Standards of maintenance and procedures on these engines.

Geveke Motoren BV (Caterpillar), Aalsmeer, the Netherlands
January 2002 – June 2006: Service Engineer
Duties:
* Commissioning new engines for our customers.
* Service & customer support.
* Periodical engine overhauls.
* Troubleshooting.
* T.A. (Technical Analysis) inspections.
* Service & support to the offshore N.A.M. oil platforms.
* Co-ordination and job planning.
* Inspections.
Achievements:
* Successfully commissioned the Global Switch project with the installation of five 3516B engines / generators of 1856 kW.
* Commissioned the M/S Compromise Holland's largest inland oil tanker.
* Commissioned the Nijlpaard Floating Crane at OBA (Overslag Bedrijf Amsterdam) 3512B engine tandem Generator set.

Brambles Steel, Velsen-Noord, the Netherlands
2001: Workshop Manager
Duties & Achievements:
* Manager of the workshop and staff (15 fitters and 2 welders).
* Operations of special steel transport vehicles for the Corus steel plant in The Netherlands.
* Planning of work, time management.
* Service & customer support.
* General management of staff, meetings, problem solving, safety seminars.
* Overseeing third party agreements, purchase of new equipment, technical adviser to senior management in purchase of new equipment.

Samsung / Volvo Heavy Equipment Europe BV, Groot Ammers, the Netherlands
1998 – 2000: Mechanical and Hydraulic Specialist / European stock controller
Duties & Achievements:
* Managing the operations of equipment assembly, staff, and third party contractors at ETS (European Transport Systems) site in Grootammers, The Netherlands.
* Managed the warehouse staff and parts department at ETS site.
* Developed and Modifications hydraulic systems on excavators for multi-function task, for example breaker/crusher/tilting/rotation functions on SE450, SE350, SE240-LC-3, SE210-LC-3, 170W-3, 130W-3 excavators.
* Hydraulic modifications on SL120, SL150, SL180, SL250 and SL330 front-end loaders and the range of Volvo EC Excavators electrical and hydraulic trouble-shooting on machines.
* Pre-delivery inspections of machines at ETS site.
* Stock control of all equipment for Europe.
* Managed all technical operations of equipment and pre-delivery inspections of equipment.
* Provided my expertise in modifications of hydraulic, electrical systems on the machines.
* Supervised all technical modifications and requirements for our network of dealers and customers in Europe.
* Modified the SL180-2 loader into automatic transmission.
* Successfully modified the 170W-3 two-piece boom hydraulic excavator multifunctional hydraulic system for tilting-, grab-, crusher- and breaker function.
* Daily reporting to the Management of Operations at ETS site.
* Conducted all CE inspections, sound and vibration tests for the new Volvo EC range.
* Provided technical, support and expertise to Volvo Dealers with equipment.

G.E. Plastics ABS, Amsterdam, the Netherlands
1997: WTB-mechanic "A" Supervisor
Maintenance duties:
* Responsible for daily maintenance of process equipment.
* Responsible to oversee trouble shooting and problematical equipment.
* Reporting to the Maintenance Department to improve such problematical conditions.
* Using technical skills to modify equipment.
* Job planning.
Achievements:
* Installed the new H.P. Banbury Mixer/H.G. Banbury Mixer/H.N. Banbury Mixer.
* Modification of the steam control valve system with the help of Spirax Sarco Ltd., The Netherlands. To overcome temperature control problems on the mills, which have troubled G.E. Plastics for the past 15 years.

Jean Heybrooke, Houten, the Netherlands
1996: Service Technician
Duties:
* Responsible for assembly of TORO lawn mowing equipment.
* Responsible for providing service to customers.
* Responsible of assembly of Ditch-Witch boring equipment.
Achievements:
* Successfully installed a power pack system for the Ditch-Witch unit from the USA for a Dutch customer and modified hydraulic unit.

ABEKO BV, Beverwijk, the Netherlands
1994 - 1995: Heavy Equipment Engineer
Duties:
* Repairs and overhaul of earthmoving equipment.
* Modifications of Hydraulic functions for multi-task operations of equipment.
Achievements:
* Successfully modified a CAT 235 excavator on tracks into a mobile excavator on wheels.

EXPERIENCE IN AUSTRALIA AND NEW ZEALAND

SUBCONTRACTOR; SELF-EMPLOYED, PROVIDING SERVICE TO THESE COMPANIES:

Adia Personnel and Davin Industries, Christchurch, New Zealand
1993: Mechanic
Duties & Achievements:
* I worked on contract at the Expansion Project of Canterbury Timber Products. During this period I was involved in the installation of new pumping systems and power generating systems and the installations of the extended conveyors. I found the project educating and interesting.

Skilled Engineering, Burswood, Perth, W.A. Australia
1991 – 1992: Mechanic. Subcontractor
Duties & Achievements:
* I worked for this company in the year 1991 to 1992 on contract on shutdown jobs at various sites.

Parkside Drilling Contractors, Cosmo Howely Gold Project, N.T. Australia
1991 – 1992: Mechanic Engineer subcontractor
Duties & Achievements:
* I worked on contract for this company for approx. 6 months and my job included the repairs and maintenance of 712,812 Atlas Copco and CHF 1000 rock drills. I was the leading hand in the maintenance and in charge of a small maintenance crew.

Monodelphous Engineering Ltd., Perth, Western Australia
1991 – 1992: Mining and oil exploration personnel (subcontractor)
Duties & Achievements:
* I worked as a sub contractor on various mining sites and projects around the country; Dominion Mining, Hayes Creek Gold Mining Project, Argyle Diamond Mining Project, MT Gibson Gold Mining Project, Offshore Oil Exploration Projects in Exmouth and Dampier on the west coast of Australia.

Elf Aquitine Exploration Australia Pty Ltd., Sydney, Australia
1990: Maintenance technician
Duties & Achievements:
* I worked in this company on sub contract. I was involved in repairs and maintenance of equipment and breakdown and shutdown jobs from time to time. The operations were in the Bass Strait in the Tasmania Sea. For other oil exploration projects of the company, I was sent from time to time as and when needed to the various sites.

Taipan Resources Ltd., South Perth, Australia
(Mining and oil exploration personnel)
1989: Underground mobile mechanic
Duties & Achievements:
* I was employed as an underground mobile technician at long shaft nickels mine; site Kambalda, Western Mining Corporation. The mine was an underground site approx. 1,900 meter deep (shaft). My job included the repairs and maintenance of mobile equipment, Tamrock and Atlas Copco Jumbo Rock drills; pumping systems, loco trains, crushers, rock breakers, diesel equipment boggers, preventive maintenance and trouble shooting. This was a very demanding job fit for the brave, I enjoyed it.

PROFESSIONAL DEVELOPMENT & PERSONAL

* Attended extensive safety courses in the mining industry.
* Courses on computer technology.
* Attended seminar "Dealing with maintenance and process problems at work".
* Continued my education with courses to keep up with technology and knowledge.
* Represented my own case to the European Court of Human Rights in family and human rights law, which was one of my greatest achievements in contributing to society and in the field of human rights.

LANGUAGES

* English: mother tongue
* Dutch: fluent

REFERENCES
Will be provided

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 7601 to 7650 of 15336)

Go to Search Parameters...

Brief Description

Looking after Maintenance and repairs of Heavy Earth Moving Equipment, Construction Equipment and Commercial Vehicles

Mechanical Engineer,Planning in primavera for projects , Designing in solidworks,Pro/E , Analysis in ANSYS

Major Course Work: Process Heat Transfer, Chemical Engineering Plant Design I, II, and III, Kinetics and Reactor Design, Process Dynamics and Control, Mass Transfer, Unit Operations, and Chemical Economics and Design

Exp.Mechanical & construction manager in Oil & gas , more that 26 years of work with big oil companies.High educated with MSc in Mechanical and offshore engineering from Robert gordon Uni /Uk.

7.5+ years of Control System Enineering experience with Global Control System leaders(INVENSYS-TRICONEX IPS/FGS,YOKOGAWA Prosafe ,CS3000,HIMA-IPS,EMERSON-DELTA V Systems)

A capable, enthusiastic computer engineering major with on-site experience as Assistant Material Coordinator at IANUA S.P.A Engineering and Contracting Company for Glass Production.

I am highly motivated Geologist / Geoscientist with degrees in Science (Earth Science: Geology) and Geomatic Engineering (Honors) from Melbourne University.

As a Instrument supervisor to lead the work crew and holding the responsibility to complete the job with standard ¡§HSE¡¨ practices as per the strict ¡¥Shell¡¦ safety norms of Petroleum Development of Oman. And also involved in Installation, calibration, loop checking, Pre commissioning, etc..

Cementing Engineer

holding 3 yrs diploma in hotel management and catering technology with more than 8 yrs exp. in catering field

Working in QA/QC

3 years diploma in mechanical engineering

LAND SURVEYOR

Currently working in the North Sea as a Slickline Supervisor on an Ad-Hoc basis.

MicroStation 3D Modeler

PDS &piping drafter

B.Tech Chem engg + MBA (marketing) with 10+ years in Project Management in O&G / Petrochemical Projects

QUALIFICATIONS : M.Sc. (Geology), Skill : Geologist, Mudlogger, Geotechnical Engineer

Good knowledge of Environmental Impact Assessment (EIA), HAZOP, Risk Assessment, Safety Audit, Environmental Audit, & Various Safety Techniques Like; International Safety Rating System (ISRS)-By DNV, Process Safety Management (PSM) etc.

Graduated Mechanical Engineer,Certified Caterpillar Engineer, Experience as a Field Engineer in the Gas & oil, Marine,Mining Industry

M. Sc. Environmental Technology (specialization in Environmental Engineering) , Wastewater treatment (Aerobic and Anaerobic process), Water disinfections, Air pollution measures and solutions (sound level measurement, air monitoring and air emis

Knowlegeable on 2D&3D AutoCAD Drafting, ArchiCAD, Vectorworks, Photoshop, Office Apllication, - Word and Excel, Outlook , Internet, Manual and Computerized Rendering, Mechanical/ Conveyor Technology (as per ASTM, ISO, JIS, and Other Drawing Standards), well versed on the English System Units.

13 years of Experience in DCS System, PLC & ESD system as well as field instrumentation.

Ph.D. in materials science and engineering, four year experience in teaching, five year experience in working in various industries. Fields of specialty; corrosion, coating, materials selection

Geophysicist. Current area - Exploration Seismology. Strong experience in Geophysical Data Processing, Theory of Polarization Anomalies, Numerical Modeling.

Looking for a position with your company in Il. I have 20+ years in the mining industry. I have been a face boss- shift mine manager and general mine manaqger.

Electrical Project Manager 20+ years experience

* Over 11 years of experience in areas of Process Automation Engineering & Instrumentation.* Hands-on experience in Automation Engineering, estimation, design, installation & maintenance of equipments in India & Abroad.Expertise in advanced PLC, systems & providing technical support on Instruments.

ISP, NOC, NETWORKING, VSAT, BROADBAND, SATCOM, CCNA, MCP, MCSA, VOIP

M.A.(English) DELHI UNIVERSITY (NCWEB) Hansraj College; Advanced Certificate Programme in Computers(languages learnt C, C++ and Basic) from ZedCA, Bareilly. Certificate Course in French Language from Alliance Francaise, Delhi.

adaptability, flexibility, coputer knowledge

Master Operator with exceptional work ethic.

MapInfo professional 6.0, 8.0, 8.5,,Schema BTS Ultima,TEMS investigation 3.1, 4.1, 5.1, 6.1.3 Agilent, Nemo for drive test (Data collecting tools

DEsign Engg., PLC, SCADA, I&C work Experience

Skills include Petroleum Engineering,reservoir Engineering,Petroelum Geoscience,Geochemist,Mud Logging

I have recently completed M. Sc. in Petroleum Technology, from University of Karachi.

Pipe rack design, routing of pipes on rack, Preparation of Tank farm Layout in detail and piping layout for the same from the process point of view. Preparation of detailed piping layout, Equipment layout, General Arrangement drawings, Isometric checking.Isometric drawing preparation

Bachelor of Science in Construction Management,National Certificate in Construction studie· Advanced in AutoCAD 2006. Broad knowledge of building trades. Carpentry, Plastering ,Tiling, Plumbing

NDT Level II Magnetic Inspection and Penetrant Inspection

I have been working construction in the Petroleum/Oil/Gas field for the past three years. I have done turnarounds and capital work.

Cogeneration, gas engines

twelve years experiance in mining all open pit running haul trucks and graderds and scrapers dozers and many more

• Results-driven, logical and methodical approach to achieving tasks and objectives

Wide experiences in Occupational Health, Safety and Environment, advisor to the employer on the measures taken in the interest of the safety and Health of persons employed in the place of work. Inspect the place of work to determine whether any machinery, plant equipment substance.

2.6 year of experience in Detailed Engineering work of the refinery units helped me understand the profile and the responsibilities of a mechanical engineer (Static) and to realize how important this field is to the oil refining business and I have learned how important it is to be flexible.

To achieve a job as ¡§Safety Professional¡¨ in an augustive organization where I can deliver the best of my performance implementing managements safety policies and procedures

Highly personable Drilling Fluids Engineer with over three years of experience in laboratory work, project supervision, logistic services both air and land logistics and mud engineering.• Proficient with Microsoft Office System (including Microsoft Word, Microsoft Excel, Microsoft PowerPoint®, Micro

Project Planning & Control Engineer / Scheduler / Earned Value System Designing and Development/Primavera Group Software Developer/I have been working in Engineering and Construction phases of EPC oil, gas and petrochemical projects/PMP (Project Management Professional)/Project Planning & Control

I am a certified lead auditor in ISO ¡V 9001, OHSAS 18001, ISO 14001 standards.

Plant Foreman with ten years experience in gold processing plant.

First Prev 151 152 [ 153 ] 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 Next Last

Seach Parameters


Goto Advanced Search...
Keywords: (e.g. mining engineer)		Find results with:

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out