Resume - Seeking challenging assignments in the field of Process Engineering Design, Simu...

Misco Jobs

Resume #73062

CONTACT INFORMATION:
View contact information...

CAREER SUMMARY

- Qualified Chemical Engineer with 5.5 years of significant Process Engineering & Operational experience in Polyethylene Plant involving Plant Operations & Optimization, Start-up/shutdown, Troubleshooting, Emergency handling and Safety.
- Proven abilities in managing petrochemical plant operations for production, maintaining the process parameters required for production, quality of the product by maintaining process conditions, etc.
- Able to optimize process parameters for productivity enhancement and improvement of safety culture.
- Effectively liaising with various departments for rectifying any mechanical/ electrical problem occurring in the plant.
- Adept in managing operations involving resource planning, in-process inspection, team building, design & development and co-ordination with internal departments.
- Recipient of several awards and certifications for exceptional performance.
- Keen understanding of the formalities and implementation of Quality and Safety Systems.
- Proficiencies in managing maintenance operations of Equipment and Utilities in Manufacturing Facilities with proven abilities in reducing downtime and enhancing operational efficiencies.
- Proficient in working with process simulating package ASPEN Plus for optimization & troubleshooting..

ORGANISATIONAL EXPERIENCE

Since Mar'03 at Haldia Petrochemicals Limited, Haldia, West Bengal
As Deputy Manager – Manufacturing
Key Deliverables:
- Working in Linear Low Density Polyethylene Plant of Haldia Petrochemicals Ltd. as Deputy Manager – Manufacturing acting as Process Shift Incharge and achieving the targeted production with the design specification norms against sales demand.
- Ensuring smooth running of the plant without violating SOP & Health-Safety-Environment guidelines.
- Managing trouble-shooting of process & quality problems in the plant and take corrective measures.
- Making prompt decisions during plant emergency and plan for quick recovery of the plant in case of shutdown.
- Coordinating with Quality Control department for consistent quality product & Service Dept. for Predictive, Preventive & Breakdown Maintenance and condition monitoring.
- Handling the preparation of Standard Operating Procedures for various process operations, checking of P&ID, simulation of Interlocks and start-up/shutdown sequence checking of the DCS logics.
- Imparting training to juniors ensuring adherence to norms and procedures; acting as Area Leader for 5S activity in plant.
- Working as a member of LLDPE Supermax Project Team for expansion of LLDPE Plant.
- Leading, mentoring & monitoring the performance of the team to ensure efficiency in process operations & meeting of individual & group targets.

Having significant exposure and experience in:
- Process Engineering & Operations of modern 300KTA Petrochemical Plant with LLDPE & HDPE Polyethylene Swing-Plant Spherilene Technology from Basell, Italy.
- Startup/shutdown & optimization of polyethylene plant, its troubleshooting and handling of emergencies such as power failure, steam failure, etc.
- Safe plant operation & control from DCS Panel using TDC 3000 TPS-GUS of Tata Honeywell, as well as from field.
- Simulating operating behavior and optimization of equipments like distillation column, heat exchangers, etc. and condensation temperature calculation using simulating packages like Design II for Windows and ASPEN Plus.
- Operating Liquid Phase Loop Reactors & Fluidized-bed Gas Phase Reactors.
- Handling & operating 3.5MW Centrifugal Compressors from Nuovo Pignone, Italy, for fluidizing gas phase reactors, 10T/hr Reciprocating Compressors from Japan Steel Works, Japan, for recycling gas to the reactors, Twin-screw 6.9MW Extruder from Japan Steel Works, Japan, for under-water pellet cutting.
- Refrigeration Package using Screw Compressors from Sabroe, ISG Drying Bed packages, Extruder Additive Metering package by KTRON, Catalyst Metering package from Hydroservice.
- Lean Phase & Dense Phase Pneumatic Conveying System using Screw Compressors from Zeppelin.
- Process interlocks checking, stroke checking of control valves, leak-testing of various hydrocarbon gas handling lines and vacuum systems, equipment/line flushing and drying for complete hydrocarbon & hazardous material removal, trial runs of pumps & compressors, column internals inspection and checking.
- Preparation of Standard Operating Procedures, Control Logic / field modifications for product quality improvement, energy saving, operation convenience and safety enhancement of plant.
- Implementation of various schemes/modifications along with Licensor to de-bottleneck the plant for capacity enhancement from 100% to 120%.
- Basic knowledge of SAP R/3 PP & PI module for creating notification.
- Well trained for Fire Fighting, Safety System, Work Permit System, Accident and Near Miss reporting.
- Well experienced in 5S plant activity. Well versed with company's HSE policy and ISO 9001, ISO 14001, & OHSAS 18001. Exposure to TPM, TQM, 6 Sigma & Kizen.

Notable achievements:
- Implemented various in-house plant modifications so as to operate the polyethylene plant at 120% capacity utilization with on-spec product.
- Received award for giving the idea of "Oil flushing in liquid additive metering system in LLDPE Extruder" and its successful implementation.
- Received award for giving the idea of interlock modification in propylene purification column.
- Successfully completed the Small Improvement Project for reduction of non-prime & off-grade material production during product grade changeover from 71601S grade to 73204T/73005T grade in LLDPE plant.
- Awarded "Performance Par Excellence" award while representing Haldia Petrochemicals Ltd. in Chapter Convention of Quality Circle (CCQC) 5S Regional Level Competition organized by Quality Circle Forum of India, Kolkata Chapter.
- Received "Excellence" award while representing Haldia Petrochemicals Ltd. in National Convention on Quality Circles (NCQC) National Level Competition organized by Quality Circle Forum of India, Kanpur Chapter.
- New polyethylene grades developed according to customer requirement viz. HDPE grades M5005L & M5025L and LLDPE grade 71601D, were stabilized in my shift without any previous operating data.
- De-bottlenecking of LLDPE plant throughput by reducing depressurization time of Piff-Puff system by increasing depressurization line diameter.
- Significantly reduced plant downtime and Off-Grade production during product family change-over by modifying startup & grade change-over EODs and EOCs.
- Successful trial of new Ziegler-Nata catalyst Z-230 from Basell under Licensor guidance.
- Successfully implemented 5S in Extruder area of LLDPE plant as Area Leader.

Trainings obtained in Haldia Petrochemicals Ltd:
- DCS: TDC-3000 TPS-GUS (In-house training by experienced industry professionals).
- PLC: Allen Bradley; PLC Operation (In-house training).
- Quality System: Trained through QES programme in TQM system by IQL trainer.
- Safety System, Hazard and Risk analysis and work permit system: In-house training.
- Energy Management: Trained by CII-Sohrabji Godrej Green Business Centre.

ACADEMIC CREDENTIALS

2002 B.Tech (Chemical) from University Colleges of Science Technology and Agriculture,
University of Calcutta, 73.47% marks
1999 B.Sc from Presidency College, University of Calcutta, scoring 54.4% marks.
1996 Higher Secondary from St. Xavier's College, W.B.C.H.S Education scoring 60%
1994 I.C.S.E from St. Thomas' High School, Council for the Indian School Certificate
Examination in 1994 scoring 86.20% marks.
Academic Projects:
- Undergone a 'Nitrobenzene Plant Design' project as a part of B.Tech. degree using MS-Excel tool for Mass balance & Energy-balance of the entire designed plant.
- Undergone a project on 'A Study on Reactive Transport & Dissolution kinetics of Elemental Mercury in Aqueous Hydrochloric Acid, Nitric Acid and Sodium Hypochlorite Solution', as a part of B.Tech. degree.

Academic Training:
- Undergone a 6-weeks in-plant training at the Haldia Refinery of Indian Oil Corporation Ltd. as a part of B.Tech. degree.

I.T. SKILLS

- ASPEN Plus v12.1
- Design II for Windows.
- MS Office, Windows XP/Vista, C, C++, FORTRAN 77, AutoCAD, BASIC, FOXPRO

PERSONAL DETAILS
Date of Birth: 11th June 1978
Linguistic Abilities: English, Hindi and Bengali

SALARY DETAILS

Current CTC INR 7,50,000/- per annum.
Expected CTC Negotiable.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 6401 to 6450 of 15498)

Go to Search Parameters...

Brief Description

Dear Sir/Madam, I am an experienced offshore Rig Electrician. Please find enclosed, my resume for your consideration.

I am I have worked extensively on both land and offshore rigs. I always try to perform my job to the best of my ability, with safety to personnel as my #1 goal.

Water industry: French citizen w/U.S. Green card; 27+ years experience in construction & operations and maintenance; electromechanical and site management skills; specialist in process component for W/WW systems

I had more than 20 years experience in Gas Processing plant, previous company I worked for LNG Plant and last position as Utilities Senior Operator and Present company I have been working for Gas Processing as field operator.

Resume CV: To join an offshore drilling company as Rad. operator, Logistics Coordinator any place in the world

I would prefer to work as Commissioning Supervisor in the Middle East.

Objective Production engineer, oilfield engineer, or mechanical engineer in a contracting firm.

Dear Sirs, I am 33 yrs. old, from Romania, Electrical Engineer. I would like to get a job in electrical/administrative petroleum/oil/gas field. Even I've have a Diploma in Electrical field I can accept to work as electrician, technician, foreman, or engineer.

20 years experience in non-destructive testing and inspection as a technician, radiation safety officer, division manager, and project manager.

NACE Certified Coating Inspector #7278, with +20 years of experience, available as (3rd party) Q.A./Q.C. coating inspector, coating surveyor, coating supervisor, vendor surveillance, etc.

I have been working in the Construction Industry for 40 years at all levels up to Construction Manager. I have extensive experience overseas including Africa and Asia. I am looking for similar work and am prepared to work anywhere at immediate notice.

Maintenance of: - Simovert - frequency regulation for the speed control of High Power asynchronous motors 450 KW and 110 KW - Frequency regulation for the speed control of Low Power asynchronous motors - High Voltage switchgear equipments - MCC - Switchgear equipments - Low Voltage -ETC...

I 'm Canadian citizen, I have second class marine engineer.

25 years of experience all over the world in the instrumentation field including 12 years offshore oil platforms, erecting, construction, precommissioning , commissioning and start-up a wide range of pneumatic, hydraulic and electronic instruments, DCS – ESD – F&G systems.

Process Engineer

I accumulated 22 years of experience in the oil industry, most of the time with the Schlumberger service company in the area of Oilfield Services management, Reservoir Evaluation Wire line and Testing.

I have 21 years in Aust Army as Maint Planner/Supervisor with Diploma Engineering (Maint). Experienced trainer in Mincom Logistics computer systems. Willing to relocate nationally or internationally for the right position.

Over twelve years experience in Offshore and Onshore Oil & Gas and Marine Structure Development in National & International government projects. Project engineering management, Engineering, Design, Construction and Project cost estimation.

WORK EXPERIENCE I have 14 years of experience in plant F.C.C ( Fluid Catalic Craking ).Refinery El Palito in Venezuela ( PDVSA ) and experience in Pre commissioning

Over 25 years of exploration drilling and mining experience. Responsible for the coordination of drilling projects in both domestic and international environments.

I was employed by ARCO Indonesia Oil & Gas since April 1980 thru March 1999. My last position was Elect/Instr Supervisor of NGL gas plant refinery located at NorthWest Java sea, for offshore facilities. My current employer is BP-Indonesia, position job as Maintenance Planner.

26 years Mechnical Design Engineering 16 years CAD experience including intensive 3D modeling 14 years product design experience. 12 years manufacturing tooling and facilities experience.

23 years experience in the Electrical Distribution/Electrical Contractor Industry. Wish to acquire a part time or full time position in an office or job site environment.

Job objective: General Supervisor, Field Supervisor, Project Manager or Assistant Project Manager. Interested in overseas opportunities.

Objective: Seeking a career position with a progressive organization where my skills , training and extensive knowledge and experience can be fully utilize, while offering the opportunity for continued career growth.

Highly experienced purchasing and material management professional. Specialized experience in remote, severe climatic locations. Extensive experience in cross cultural work situations.

Curriculum Vitae „h Over 25 years of oilfield experience in Canada „h Mechanic on a seismic crew until tools were stolen „h Roughneck to driller, 11 years as a driller on a drilling rig „h Owner/operator of a vacuum truck business „h Mechanically inclined

BS EE from USA. I have over 14 years of experience in maintenance and projects while working with reputable organization like Exxon, Mobil, Occidental and BP Pakistan in fertilizer, petrochemical and oil/gas E&P industries.

OVER THIRTY YEARS EXPERIENCE AS A FULLY CODED WELDER ALONG WITH FOREMAN, SUPERVISER AND WELDING ENGINEER/CHIEF WELDING ENGINEER POSITONS ALSO UNDERTAKEN ALONG WITH NORMAL WELDER POSITION.

Seeking employment where my years of experience in surface & underground mining & construction, as well as my strong sales, contracting, consulting, and management skills can best be used

Chemical engineer w/ experience in developing various contracts in oil, gas, water, waste treatment & soil road maintenance. Expert w/ performance based contract. Possesses good organizational, team & interpersonal skills. Adept at working & communicating across disciplines & management levels.

Looking for a new challenge at the end of 2003 my present contract end then

Operate, commission and monitor equipment in assigned areas, maintaining parameters with the guide lines of the operating manuals and procedures of 80,000BPD three phase separation multi train crude separation units, 110 MMSCFDgas compression& treatment plants

Strategic Planning Business Development Project and Business Valuation

I’m an international Petroleum Engineer, currently working in Turkish Petroleum Int.Co.Ltd. as a Completion/Workover Supervisor back to back Ankara/TR to Aktjubinsk/KZ, experienced about 20 years on land and offshore, in offices in many companies and projects.

Nobody has climbed up through the steps of success with his hands in his pockets.

Seeking challenging assignments in the field of Process Engineering Design, Simulation and Commissioning with leading organisations of repute in the Petrochemical Industry that offers me opportunities to utilize my engineering skills & experiences for advancement in my career endeavours

I have BSc. in Mechanical Engineering, MSc. in Mechanical Vibration of Rotating and MSc. in design of gas turbines. I have >20years of experience with Engineering and Operating Companies in O&G and Petrochemical fields as Senior Mechanical Engineer in Egypt Enppi and in Qatar QP Offshore and QVC

C/C++/ VB / SCADA / Electronic / Embedded / Automation / Systems Engineering

I completed my degree in Electrical Engineering and had taken and passed the highest National Examination in The Philippines, Professional Electrical Engineers Examinations in 1986. I have a good experience in Oil and Gas, Controls, Fire and Gas Systems, Design, Detailed Autocad Drafting(Isometric),

Instrument Engineer is seeking a challenging Position for growth and career opportunity in Oil & Gas Industry. More than 13 years of experience in Preventive and break down maintenance for power plant & gas plant instrumentations with GE Frame 6 gas turbines, DCS and Mark V control systems.

Associate Degree in Mechanical Engineering Draughting, 10 years Experience in various Mechanical and Plant Layout applications, using Inventor, Autocad, Pro Engineer, MSC Patran. Heavy Engineering Environment, International Earth Moving Machinery Manufacturing Company in South Africa.

BE Mechanical Engineer with 5 years experience in Piping Stress Analysis

Experienced exploration / production geophysicist and geologist with major Exploration Companies

22 years oil field Experians. Higher secondary.

Over 23 yrs of heavy earth field mechanic. AAS in Heavy equipment and diesel Technology. Lack final semester for BA in Training Industry & Business. CAT and Kamatsu trained.

AutoCAD, PDS (3-D modeling). Lead engineer of erection department

I hold a degree in Polymer Eng. from the Federal University of Technology Owerri, Nigeria. I am proficient in Autocad 2D/3D modelling, HYSYS, Bentley Auto Plant/P&ID, Boiler Maker, Autodesk Inventor

HIGHLY COMPETENT IN BUILDING AND ROAD CONSTRUCTION WORK(B.ENGINEERING,CIVIL)

Instrumentation technician with nine years experience in maintenence,repair,calibrating and installing of electrical,electronic and pnuematic equipment.

First Prev 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 [ 129 ] 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 Next Last

Seach Parameters


Goto Advanced Search...
Keywords: (e.g. mining engineer)		Find results with:

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out