Misco Jobs  |  Go to Job Seeker's Center »»   |  
 
«« previous resume Resume #763 next resume »»
CONTACT INFORMATION:
View contact information...

EDUCATION

MS, New Mexico State University, Las Cruces, NM - 2001
Major: Geology
Thesis Title:     Proterozoic to Middle Tertiary Magmatic History of the Little Hatchet
Mountains, Grant and Hidalgo Counties, South-western New Mexico

BS, Youngstown State University, Youngstown, OH - 1997
Major: Geology
Minor: Chemistry
Field Camp: Indiana University – 7 week field course in south-western Montana

EXPERIENCE

Staff Research Assistant: Los Alamos National Laboratory, Los Alamos, NM – 2001 to present
•    Environmental field sampling of soil and water
•    Bedrock mapping of volcanic rocks
•    Logging volcanic rock cores
•    Construction of cross sections
•    Fracture characterization analysis
•    Groundwater modeling
•    Digitizing geologic maps in ArcMap

Staff Scientist: Souder, Miller, & Associates, Las Cruces, NM – 2000 to 2001
•    Supervised drilling operations
•    Collected environmental field samples of air, soil, and water
•    Maintained, installed, and monitored remediation systems
•    Drafted well logs, potentiometric surfaces, and site maps

Teaching Assistant: New Mexico State University, Las Cruces, NM – 1998 to 2000
•    Prepared rock and mineral specimens
•    Lectured for physical geology laboratory and mineralogy laboratory

Geoscientist Intern: Texaco Exploration & Production, Midland, TX – 1999
•    Characterized reservoir in south-eastern New Mexico
•    Described 350 feet of limestone/dolostone core
•    Evaluated a suite of electric logs
•    Assembled cross sections
•    Implemented sequence stratigraphy

Geologist: Rosebud Mining Company, Kittanning, PA – 1997
•    Mapped coal reserves suitable for deep mining
•    Interpreted drill hole data
•    Used topographic and isopach maps

Drillers Assistant: McKay & Gould Drilling, Darlington, PA – summers of 1995 & 1996
•    Installed piezometer wells, monitoring wells, and shot holes
•    Collected core samples and split spoon soil samples

PUBLICATIONS

Channell, R.A., McMillan, N.J., Lawton, T.F., Heizler, M., Esser, R.P., and McLemore, V.T., 2000,Magmatic History of the Little Hatchet Mountains, Hidalgo and Grant Counties, south-western New Mexico: New Mexico Geological Society Guidebook, no. 51, p. 141-148.

PRESENTATIONS

•    Southwest Section of American Association of Petroleum Geologists – Midland, TX
•    New Mexico Geological Society 2000 Fall Field Conference – South-western New Mexico

CERTIFICATION & TRAINING

•    40-Hour Hazardous Waste Site Worker Complying with 29 CFR 1910.120 (e)
    Alice Hamilton Occupational Health Center, Los Alamos, NM – October 5, 2001
•    40-Hour Basic Health and Safety Training Complying with 29 CFR 1910.120 (e)(3)(i)
Center for Hazardous Materials Research, Pittsburgh, PA – March 28, 1997
•    MSHA (Mine Safety & Health Administration) surface mining only
McKay & Gould Drilling, Darlington, PA (Jack Gould, Instructor) – April 19, 1997
•    Notary Public of the State of New Mexico - (Expiration: January 16, 2005)

SHORTCOURSES

•    Trimble Navigation RTK Training with 5700 GPS Total Station – 2001 Los Alamos, NM
•    Geology and Development of a Lower Cretaceous Natural Gas Field, Lavaca County, TX: Annual Convention of the AAPG – 1999 San Antonio, TX
•    Texaco Core Workshop - Reservoir Characterization by Analyzing Carbonate Cores and Applying Sequence Stratigraphy – 1999 Midland, TX
•    Reservoir Enhancement Through the Implementation of Horizontal Drilling – 1999 Hobbs, NM

COMPUTER SKILLS

Proficient with Power Point, Excel, Word, and Canvas
Moderate knowledge of Access, Auto Cad, Abode Illustrator, ArcMap, and SpheriStat
Basic Knowledge of ArcView GIS, Petra, and Powerlog.


INSTRUMENTATION EXPERIENCE

•    Petrographic Microscope
•    X-Ray Diffraction
•    X-Ray Fluorescence
•    Photo Ionization Detector
•    4-Gas Meter
•    Digitizing Table
•    Surveying Equipment (standard transit with rod)
•    Trimble GPS 5700

LEADERSHIP SKILLS

•    Assistant Scout Master – Boy Scouts of America
•    Vice President - Youngstown State University Geological Society
•    Arts & Sciences Representative – YSU Student Government
•    Student Academic Senator – YSU Academic Senate

HONORS & AWARDS

•    Phi Kappa Phi Honor Society                
•    Eagle Scout                        
•    Deans List – Youngstown State University
•    Russell & Frankie Clemons Field Scholarship
•    New Mexico Geological Society Scholarship
•    New Mexico State University Geology Department Scholarship                
        

View contact information...
«« previous resume next resume »»
Search Results (Resumes 7901 to 7950 of 15341)Go to Search Parameters...
Brief Description
EDU: MSc Environmental Geochemistry, University of Cape Town (Dec02); BSE Civil & Environmental Engineering, Princeton University (Jun00). WORK: Assistant Lecturer, University of Cape Town (01-02); Intern, SSPA Environmental Consultants (09/00-12/00) OTHER: Computing, many aspects including GIS
Over the past 14 years in the oil industry i have worked from ground up on drilling rigs. roustabout , floorhand ,motorman , derrickhand , driller , and my past employment for the past 4 years has been operations superintendent with duties pertaining to drilling ,workover and production.
Industrial Engineer, specialization in Environmental Engineering. 12 years experience in the Environmental area and oil and gas sector, as an advisor and as HSE Manager. Large experience formulating CEMPS, EIA, Audit programs, etc., and managing HSE budgets.
I would like to further my career in maintenance and would enjoy the opportunity and challenges that this opportunity would offer. I believe I have the skills and knowledge that would be an asset to any operations.
Recent geological engineering graduate (EIT). Cooperative education background includes various forms of exploration, open-pit and underground mining experience, construction supervision and inspection, monitoring programs, and general geological, environmental, and civil engineering practices.
CHEMICAL ENGINEER with twelve years experience in production/process/project engineering. Looking for Project Management/Senior Project Engineering position either in the USA or Overseas [Preferably Africa].
Fundamental and technical security analysis, fixed income, financial statement analysis, accounting, budgeting, portfolio construction and asset allocation, econometric analysis, financial and statistical data modeling and forecasting, risk management, project management.
OBJECTIVE Senior site agent/ project manager within the commercial construction or civil industry. Remuneration negotiable (from € 50000 p.a. plus benefits), depending on position and region where contract is offered. Would consider any international placement.
OBJECTIVE To obtain a challenging position in environmental management utilizing acquired skills and experience.
Above 12 years experience in the process Industry. Conversant with software packages like windows, Hextran, PI, Lims, Simulator and BAAN. Worked in various capacities in the operation of Petrochemical operation. Loading, Sulfiding and technical support to refinery unit operations
SUMMARY: Strong foundation in oil and gas, mining and environmental geology, in industry and national laboratory setting.
Basin modelling, organic petrography, sequence stratigraphy, x-ray diffraction, 2D seismic
I am currently a graduate student at the Univ. of Illinois at Urbana-Champaign in the Env. Engineering Dept. I seek a job that will give me the opportunity to explore the field of env. engineering. One in which I can be active both physically and mentally and that challenges me.
Offer a unique combination of Senior Level Federal Government and Private Sector project management and leadership experience. Extensive International experience providing strategic solutions to a wide variety of International Clients.
Looking to contribute to the success of a company with my experience, hardwork and dedication to work as a team and make a difference preferably working on Petroleum, Gas or Cargo ships or Oil Rigs
I can work in supply boats, service ship and bunker ship
To obtain a position as an Engineer within a company where my experience and education will provide the opportunity for further growth.
I'm a recent university graduate from York University with a bachelor of Science in Geophysics. I'm looking for an entry level position as a Geophysicist or a related field.
Around 12 years in the field of Instrumentation and Control System in Olefins Gas Cracker, Petrochemical and Copper Smelter & Refinery Sectors.
12 year experience in mining industry regarding international contracting, tendering, Project Planning and monitoring, Research and development activities, Mine Production , management, co-ordination.
"Seeking Professional and Challenging career in Oil/ Gas/ Refinery/ Petrochemical sector. Offer extensive Field experiences in Maintenance/ Shutdown/ Commissioning/ and Construction of Plant and Rotary / Static Equipment”
APPRENTICESHIP TRAINED HEAVY DUTY DIESEL FITTER
8 yrs.exp in the commissioning and operation of gasturbines, boilers & all other utilities in a big power plant and fertlisers company
I am the Environmental Health Specialist for the Gulf Cooperation Council Center for Infection Control, I have ISO 14001:2004 Certified Lead Auditor Certificate EMS
Field and Exploration Geologist in Opencast mines on Beach Placer Deposit.
Selling Skill, IT-Presales, Management
Facilities Construction Planner and Overseer
Automotive and Locomotive Mechanic - Knowledgable and Reliable
Free! Program Director Construction Large Projects SE Asia Hotel, Embassy, High Rise, Medical, Retail, Data Facilities, Power, Roads, MEP Thailand Vietnam Korea Philippines
HR Generalist with 14 years of experience
14 years of experience in managing all phases of Operations, including purchasing, inventory control, transportation, budget preparation and execution, staff development and regulatory compliance. Experience held in manufacturing, Oil/Gas, transportation and chemical industries.
-Primavera (Deep knowledge and experience) / SAFRAN planning program / AutoCAD 2-D (Professional use) /
Proactive HSE expert with 13+ years expertise encompassing HSE in Oil and Gas Construction; accustomed to project Management and coordinating resources effectively to achieve targets within often stringent constraints. Energetic, dynamic, relishes challenges and demonstrates indepth analytical Skill
19 yrs. experience in the construction industry as a foreman/heavy equipment operator/mason Extensive training to accurately and safely operate heavy equipment First Aid and CPR Certified
Working as a Sales engineer in a well established LLC. It’s a 20 years old company which deals with Instrumentation, Automation, Compressors, Air Operated Pumps, Valve Automation, Pneumatic Tools, Transmission Products and Material handling.
HSE, Risk Assessment & Loss Prevention Engineering in Oil & Gas Field
I had a diploma of INTERNATIONAL WELDING ENGINEER in central metallurgical researches and development institute under certification of IIW (international institute of welding). Certificate no IWE AT 0708.. I worked in EMEC as a Drilling fluid Engineer in syria from 3/2009 till now.
BE Mechanical, Good surveying and project management skills, Sales and Marketing
My unique mix of previous work experience combined with my completion of the Associate of Applied Science Degree in Process Technology makes me an ideal candidate for employment with your company.
10 years experience with crane, lifting and rigging. certified in all aspects. looking for a professional company with potential for advancement
I have a keen interest in science and its application towards solving problems. I am a creative individual who takes initiative when the situation calls for it. I am very determined and believe in completing what I start, from the planning phase, to the design phase and ultimately the implementation
Field Tech Mechanic
I'm 31 years old working as a condition monitoring engineer in Badr Petroleum Company joint venture with SHELL company where my nature of job is to manage and develope predective maintenance programme for rotating machinery through vibration analysis, lube oil analysis and thermography
I am a young professional with BSc Geological Sciences degree, working for exploration company in the position of GIS Intern. I'm self motivated and always in the position to be taught and I'm very fast to understand the need and applications that may be required by any employer.
I am a petroleum engineer from UT-Austin. I want to go offshore for my first full time job. I enjoy being in the field over the office. I will be up to any task that is required.
Geophysicist, Information technology & Communication, Network Engineer, System Administrator, Hardware & Software developer
Key responsibility of Marketing and selling our Products like ATC, Auto Loader, Chillers & Coolers, Hypoid Motors, Telescopic Covers, Rotary Tables, Spindles for south India Region.
I have over ten years experience in the building and facility maintenance and management. I hired and trained technicians for HVACs; Carpentry, Plumbing, Electrical, Appliance Repairs and Mechanical. I graduated from vocational high in Air-Conditioning and Refrigeration.
Working at SUI FIELD GAS COMPRESSOR STATION (SFGCS), having daily throughput of 600 MMSCFD
Graduate Mechanical Engineer with ASNT level-2 NDT and CNC part programming .
First   Prev   151   152   153   154   155   156   157   158   [ 159 ]   160   161   162   163   164   165   166   167   168   169   170   171   172   173   174   175   176   177   178   179   180   181   182   183   184   185   186   187   188   189   190   191   192   193   194   195   196   197   198   199   200   Next   Last
Seach Parameters

Goto Advanced Search...
Keywords: (e.g. mining engineer)Find results with:
Frequently Asked Questions
What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...
Employer's Center


» Employers Home
» Feedback
» Help

» Post Jobs
» Edit/Delete Jobs
» Search Resumes
» Resumes By Email

» My Account
» Log In

» Log Out
 
©1999-2009 Misco Jobs. All rights reserved.  Contact: support@miscojobs.com