Resume - 8 years' experience in petroleum refining; process modeling; profitability studi...

Misco Jobs

Resume #76639

CONTACT INFORMATION:
View contact information...

OBJECTIVE
Chemical Process Engineer

HIGHLIGHTS OF QUALIFICATIONS

- Master of Science Degree in Chemical Engineering
- petroleum refining technology (Crude Oil Distillation, C5/C6 Isomerization, Alkylation, Naphtha Hydrotreating, Jet and Diesel Hydrotreating, Catalytic Naphtha Reforming, Fluid Catalytic Cracking, Hydrocracking, Steam Cracking)
- refinery production planning using linear programming model
- refinery process modeling and optimization
- knowledgeable in software such as: PIMS, Petro-SIM, PetroFine, RefSys, Hysys, CrudeManager, Spyro, OSI ProcessBook, OSI DataLink, Microsoft Office
- language skills: English, Polish, Hindi, Russian
- problem solving skills
- communication skills

SELECTED ACHIEVEMENTS

- Determined using PIMS model economic potentials of selected crude oils for PKN Plock refinery by calculating net operating margins which could be generated by processing them. The rest of the team working on this project supplied me with the assays of crude oils taken into consideration and converted results of simulations into the report and presentation for the management board. All this resulted in PKN Plock refinery starting to process two new brands of crude oil and in the improvement in its net operating margin. (Crude Oil Slate Diversification Project).

- Identified and rectified inaccuracies in several process models supplied to PKN by various external vendors. That enabled me and the other engineers to generate simulation results closer to reality and my superiors to make correct decisions based on sound premises.

- Conducted profitability studies of proposed improvements in a number of process units using refinery PIMS model. As a result most of the proposed improvements were found capable of generating a profit and implemented. (Optima Project)

- Generated crude distillation units cases, fluid catalytic cracking unit cases and hydrocracking unit cases to be made into PIMS submodel tables of the respective process units Upgraded PIMS model enabled the Planning Department to develop more accurate production plans and that allowed the company as a whole to improve its profit margin. (Plock Refinery PIMS Model Upgrade Project with AspenTech)

- Set up and calibrated models of crude distillation units, fluid catalytic cracking unit and hydrocracking unit using PetroFine. These process unit models were incorporated into a refinery-wide model which was used to verify feasibility of proposed improvements. (Profit Improvement Program with KBC Process Technology Ltd)

- Strong and effective communicative skills on many occasions allowed me to collect process data such as plant capacities, feed and product quality constraints, raw material consumption, product yields, utility consumption, chemicals and catalyst consumption and intermediate product stream dispositions required for modeling, profit improvement projects and refinery performance benchmarking in a timely and accurate manner.

CAREER SUMMARY

PKN ORLEN SA (www.orlen.pl ), Plock, Poland, 8 years
PKN ORLEN is one of Central Europe's largest refiners of crude oil. It operates 7 refineries. Their total deep processing capacity reaches 31.7 million tonnes per annum.

Chemical Engineer
- conducted feasibility, optimization and profitability studies using the refinery PIMS model
- maintained and upgraded the refinery PIMS model
- kept track of all changes made to the refinery PIMS model
- developed and kept up-to-date the documentation of the refinery PIMS model
- generated crude assay tables in PIMS format using Spyral Crude Manager and ATS
- generated delta-based process submodel tables in PIMS format using PetroSim
- set up and calibrated non-linear models of refinery processes using PetroFine, PetroSim, Spyro
- collected, surveyed and validated refinery product lab data
- monitored crude oil properties
- monitored operation of process units
- planned and coordinated test runs at process units
- created process unit flowsheets using OSI ProcessBook
- identified bottlenecks
- supported continuous improvement
- evaluated chemical process technology
- evaluated process modeling software
- coached less experienced colleagues

Krakow Pharmaceutical Company Polfa, 6 months

Shift Coordinator
- coordinated and supervised the work of a team of operators at the vitamin B production unit

EDUCATION

Master of Arts Degree, South Asian Studies, Jagiellonian University, Krakow, Poland
Master of Science Degree, Chemical Engineering, Krakow University of Technology, Poland

PROFESSIONAL DEVELOPMENT

Linear Programming in Refinery & Supply Planning (Shell Global Solutions)
Intermediate PIMS (AspenTech)
Essential HYSYS (Hyprotech/AspenTech)
PetroFine (KBC Process Technology)
Refinery Modeling using Aspen RefSys (AspenTech)
Petro-SIM trainings (KBC Process Technology): distillation columns, catalytic cracking, hydrocracking, catalytic naphtha reforming, LP vector generation
Spyro Introduction (Pyrotec)
CrudeManager (Spiral)

REFERENCES AVAILABLE UPON REQUEST

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 2301 to 2350 of 15497)

Go to Search Parameters...

Brief Description

Senior Drilling Engineer

8 years' experience in petroleum refining; process modeling; profitability studies; production planning; LP (linear programming); PIMS; HYSYS; Petro-SIM; CrudeManager; Spyro; ProcessBook; DataLink; MS Office; M.Sc. in chemical engineering (specialized in petroleum processing)

I am a petroleum engr, US citizen, with 20+ years experience as Drilling Supervisor, on & offshore, in drlg, completion, workover, testing, in the US and many other countries. Familiar with deviated drlg, horizontal, drlg underbalance, H2S, wkg in remote locs. Fluent English & Spanish.

Workover & completion supervisor

Extended experience in Supply Chain Management process and strategies development, Service integration packages, negotiations, tender exercises, purchasing, logistics, Inventory control and Warehousing.Dynamism, efficiency, objectivity and perseverance

Over 20 years of experience in Plant Operations or Maintenance.

PCS Manager - Cost and Planner Engineer

I have 9 years experience as Material -Procurement/ Expediting/Materials co-coordinator, the assignment which included handling of all aspects of Oil and Gas Industry related SAP-SCM/ Oracle 11i5.9 based EBS, EAM,CPL modules.

I am a Geologic Engineer with more than 9 years of experience. I have worked for multiple mining companies in Peru. Basically I have worked for open pit operations, but I also have experience with underground mines. I am experienced whit mine geology (ore control), porphyries of Cu-Mo, epithermal.

Instrumentation Engineer with 12 years experience of Instrumentation & control scope of project engineering and plant maintenance in Oil & gas,petrochemical and chemical industry.

I am civil engineer having 12 years experience.i have passed post graduate diploma in this field.

Gas turbine component Design, GD&T, Performance, CFD, CFX, Fluent, LES.

A Senior Waste management/Environmental Protection Technician with a wide range of experience Documentation/Safety Permit issuance, Isolations Procedures, Operations & Maintenance of industries, Waste management plants. Able to work on own initiative and as part of a team. Proven leadership skills

NEBOSH, INDUSTRIAL SAFETY DIPLOMA

- Experience in managing a team at the work place.

Career ObjectiveTo be the best performer for the group, I am serving. Working for its progress and achieve its goals by Caring ,Sharing and Growing within all team members..

Experience in General Administration / Human Resource Management •Document Management / EDMS on Construction Project Management and Integrated Facility Management. •Experience in Contract and Cost Administration / Property Management •Includes diverse supervisory skills in planning and organiz

A Design Specialist responsible for managing the setup, standards, training, design-team leadership, and coordination of Intelligent Data-centric CAD work within multiple offices and Engineering disciplines, both domestic and international. P&IDs, Piping, Smartplant, SPPID

Chemical engineer having more than 12 yrs. experience in petochemical in operation and design consultancy.Also having experience in precommissioning and commissionig of petrochemical plants.

Directional Drilling Supervisor with 18 years in Oil & Gas Industry

Experienced Safety Manager. Experience at Head/Regional./Site Office level. Experienced in setting up sites and on-going training of personnel. Writing Site Specific Management Plans and up-grading of overall management systems a speciality.

Ph.D. in Geophysics (2005), C++, Fortran developer, geomodeller, processor. 5 years of industrial experience, 10 years in academy - geophysics and applied mathematics.

Facilities management, HR Management, Administration,- Mechanical Engineer, NEBOSH

Chemist/Metallurgist - Graduated from the western Australian School of Mines; Australian resident status; Experience in characterization and processing of rocks, minerals and coals; strong background in analytical chemistry.

15 years real estate experience with 7 years oil and gas experience.

Safety Professional for Construction, Railroad or Mining

Computer literate and exposed in construction scope of work ranging from medium to large-scale project for 13 years experience as a Quantity Surveyor dealing with all general QS duties both pre-contract and post-contract major in civil engineering, infrastructure and building works.

Business owner, aerospace mechanical engineer, U.S. Navy military veteran.

More than 7 years experienced engineers with a PHD degree in technical construction can conduct strike-calculations and dimensioning of onshore marine constructions for oil and gas production. Skillfully use software like LS-DYNA, MARC, SESAM etc for the structural analysis.

Petroleum Engineer

Maintenance, Construction, commissioning for Refineries, FPSO, Offshore Platforms etc.

I am a BE(Electrical) Engineer having more than 12½ years of comprehensive experience (6+ years in Gulf) in Consultancy (Design) and Project Implementation involving Designing of Electrical Services, Tendering, BOQ , Estimates, Technical Specifications and in Installation, Testing and Commissioni

I have more than 15 years experience in the industrial field, but I am certified in the field of quality management and assurance, and right now I am working as quality management and assurance manger in ole jordan(bmw, rover and mini automotive dealership) and I have been worked in arab potash comp

Preparation of companies to ISO 9001, 14001, API SPEC Q1, OHSAS 18001 or any other Management systems standard certification.

I was working at sea for 28 years, including 12 years as a Master. Though I have a quite large experience in the trading on tankers I would like to find the same position in offshore industry, such as FSO, AHTS, PSV w/ot DP.

VP exploration of several junior mining companies. Responsible for the discovery and development of 3 MOZ (+) Au Charaat deposit in Kyrgyzstan. Twenty six years experience in Ore deposits discovery and development with emphasis on Au as well as Cu, Mo and W

Experienced Senior Drilling Supervisor • 29 years hands-on oil field experience, including cyberbased Jack-ups, semi-sub and platform rigs and all size land rigs.

I was directly responsible for all completing timely daily drilling and cost control reports required by the operator and regulatory agencies; ensuring equipment and materials meet project and regulatory requirements; ensuring project inventory requirements are met; enforcing company health, safety,

Welding Supervisor

Msc in Safety, HND Safety tech. NEBOSH, ASP

I am a dedicated professional who understands the importance of retaining accounts. My ability to get the job done, including quickly and accurately diagnosing and troubleshooting technical problems, has solidified the loyalty of numerous clients. I assure you, these factors, as well as the skills i

I desire to maintain a safe and efficient work standard that will reach the client goals as well as keep moral at its highest between all service groups involved. I plan to do this through excellent communication skills and proffessionalism.

Have been a Project Manager/SCM for more than 10 years, also have been in charge of Permitting.

PDMS piping designer. PDMS modul design, draft, izodraft. Layout drawings and ISO sketch. Expeience in: piping design for power plants, Steam turbines, compressor plants, support design for chemical industry and refinery

I am actually working on behalf of ExxonMobil refinery in France as a system and network engineer. I have a good experience in control systems (PLC and DCs based systems) as well as in SCADA supervisory. You can find enclosed my CV with a brief description of my skills.

Accountant, Accounts, Finance, Financial

I am capable of all aspects of the oil field.

Over 8 years(1 Year in Kazakhstan) Professional Experience in Project Document Management, Administrative and Document Control of Engineering Procurement and Construction activities of Process Plants including Oil and Gas Installations (NGL and Sour Gas Facilities), Refineries and Petrochemicals. M

I have 25 years experience in mining. My day-to-day output reflects a high level of motivation, efficiency, and ability to meet any objective. I have a proven ability to troubleshoot, perform under a minimum amount of supervision, and demonstrate a high degree of initiative and good judgment.

Over 25 years experience in automotive, heavy equipment, and tractor / trailer repair, maintenance, and rebuilds. Repair, maintenance, and diagnostics on all types of heavy equipment / tractor trailer in shop and field service. Rebuild on all types of engines to include Caterpillar, Cummins / Detro

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 [ 47 ] 48 49 50 Next Last

Seach Parameters


Goto Advanced Search...
Keywords: (e.g. mining engineer)		Find results with:

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out