Resume - I, Rajesh Nandy, is having Diploma in Mechanical Engineering. I have total 09 ye...

Misco Jobs

Resume #76962

CONTACT INFORMATION:
View contact information...

My approach:

I would like to derive professional satisfaction by helping others which deliver happiness to me also on the other way.

D.O.B: 20/03/1976
Marital status: Married

Job Field:
Gas Engine based power plant which also use to drive rotating compressor (Mechanical)

Experience Summary:

I have total Nine years experience in gas engine field. I was started my career as operator with Waukesha gas engine, USA under Waukesha engine distributor in India. Later I promoted up to Senior Service Engineer with this company. Presently I am working in abroad with Deutz gas engine (Germany) under Distributor as Deputy Service Manager.

I have an enough hands on experience on gas engine service field including installation, commissioning, troubleshooting, and overhauling (top as well as major) as team leader. In present company, I am responsible for controlling whole service quality, quality trouble shooting, lead service team, independent overhauling and commissioning, maintaining documentation as per standard, maintain relation with customer and distributor as one responsible person of company and improving business plan with more revenue earn for company.

I was in Bangkok in 2002, USA in 2006 and Germany in 2007 for attending practical training classes about gas engine with engine controlling system. Accordingly I got certificate and key also directly from Deutz as well as Waukesha factory to authorize me for working with their engines.

I also have basic understanding about other power plant equipment including alternator, panels with drawing, transformer, power distribution system, circuit breaker etc. I am habituated with working in office environment with computer and others.

JOB PROFILE:

KALTIMEX ENERGY

Period:

From January 2007 to till date

Designation:

From Assistant Service Manager to Deputy Service Manager

About Company:

Kaltimex Energy is the only distributor of Deutz Gas engine, Germany, for total Bangladesh and Indonesia. Kaltimex Energy is wholly responsible for marketing, supplying, erection and commissioning, after sales service, parts sales for Deutz gas engine in this two country. Normally our company takes the whole responsibility of supplying and commission whole power plant based on gas engine like EPC on guaranteed basis. At present company already installed and commissioned 200 gas engines based power plant successfully in whole Bangladesh only.

My main responsibility is to support and continuous improve of whole after sales service of this company as one of the responsible person.

Some of my main responsibility is given below in this Company:

„« Lead Service team always
„« Quality installation of power plant as per standard
„« Commissioning engine individually as per standard
„« Quality trouble shooting
„« Motivate and trained people in service team always
„« Proper schedule maintenance as per manufacture guide lines
„« Complete overhauling of engine including major with responsibility
„« Maintain and improving whole service quality
„« Proper documentation maintain
„« Maintain customer relation ship always
„« Give decision as team leader whenever required
„« Increase service revenue for company always
„« Better business planning and implementation with management

AEICORP TECHNOLOGIES PVT LTD.

Period:

From January 2000 to December 2006

Designation:

From trainee operator to service engineer then senior service engineer

About AEICORP:

Aeicorp is the authorized distributor for Waukesha gas engine (U.S.A.) in India. This engine is used for power generation, compressor drive, Mechanical drive, Co-generation purpose. Company had nearly 300-gas engine throughout India at different location for different application. Company was responsible for total commissioning of a new plant including electrical systems with other auxiliaries related to project including after sales services.

Job Responsibility:

I did the following jobs at various projects at different location of India for last six years.

1. Un-loading various size and shape equipment including engines, alternator, compressor, electrical panels, radiator, cooling tower etc.
2. Shifting, leveling, fixing of above materials with their base.

3. Did erection activity successfully at various sites. It includes grounding, web-deflection, coupling, various alignments, and pipeline layout as per drawing, various electrical component set-ups, manpower handling, and material planning for optimum use.

4. Did commissioning activity individually at various projects for various applications. It includes fuel system adjustment, ignition system adjustment, calibration with setting for various safety devices, programming of different electronic modules.

5. Troubleshooting for various equipment using for different application mainly in gas engine including other rotating equipment like diesels engine, compressor.

6. Did preventive maintenance individually required at various sites for different application for gas engine.

7. Lead operational and maintenance team individually and successfully. Did activity required during contract as a head. It includes daily operating parameter checking, proper utilization of manpower, planning for shutdown activities to avoid any unwanted tripping of plant, maintain relation with customer regularly, reporting to office as required.

8. Did top and major overhauling for rotating equipment including gas engines at different location individually.

9. I also did some basic office activity like report making, answer to any technical quires of customer etc. Some times I need to give some training to customer at different places for customer satisfaction and for business promotion.

EXPO GAS CONTAINERS LTD.

Period: From March 1999 to December 1999

Designation: Trainee Engineer

Responsibilities: Note down all the parameters during running of the engine and some others prime movers with check the health condition during running including any unusual noise or vibration etc. I also did preventive maintenance activities during normal shut down, reporting to next higher bosses regularly etc.

EDUCATION

1. Diploma in Mechanical Engineer, North Kolkata Polytechnic, West Bengal Board of Technical Education, India, 1998.
2. Higher Secondary Education, Udaypur School, West Bengal Council of Higher Secondary Education, India, 1994.
3. School Final, Nimta High School, West Bengal Board of Secondary Education, 1992.
4. Graduation, Kolkata University, West Bengal, India, 2006.

PROFESSIONAL TRAINING

1. Got the certificate of GET (Gas Engine Technology) from Waukesha Engine Division. The examination held in Bangkok on 2002.

2. Got the certificate for EGCP-3 controller from Woodward Governor Company.

3. Attended courses for first aid and industrial safety.

4. Have sound knowledge about basic computer application packages like Word, Excel, Power point etc.

5. Got the certificate of VHP of Waukesha gas engine from U.S.A. at their factory. The examination was held on 2006 in USA.

6. Got the certificate of ESM for gas engine controlling from Waukesha gas engine factory in U.S.A. The examination was held on 2006 in USA.

7. Got the certificate of Deutz gas engine with controlling system of engine from their Germany factory. The examination was held on last year i.e. 2007 at Manheim, Germany.

PERSONAL INFORMATION
Date of birth: 20/03/1976
Sex: Male
Nationality: Indian
Religion: Hindu
Language Known: English, Hindi and Bengali
Marital Status: Married
Strengths: Self motivated, Confident and always ready to face Challenges
Weakness: Sometimes loose patience with others pace of work or Behavior

Information related to JOB:
Joining time:
I need to give three months prior notice to my present company before leave the job as per contract paper.

Current Salary:
US$ 2000 (US Dollar 2000) + family accommodation, car, telephone and others standard facilities.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 5751 to 5800 of 15509)

Go to Search Parameters...

Brief Description

Quantitative Interpretation for Reservoir Characterization

13 Years Hands on Experience in Inspection (Plant Inspection) & Quality Control in Fabrication, Installation and Testing of Process & Utility Piping Work, Sub Sea Pipeline Work, Pressure Vessel and Offshore Steel Structures like Jacket, Deck, Bridge etc. in the field of Oil & Gas Development.

Broad knowledge of environmental chemistry and extensive experience in laboratory processes, instruments, equipment, quality assurance and control, analytical tutoring, and environmental auditing in 10 years of professional practice.

28 years exploration experiance in Africa. Two companies Anglo American & Union Carbide. Worked in remote locations, overseeing all personal and financial matters, budget control, oversaw logistics of exploation camps, responsible for safety, health and enviroment issues, conducted training.

To work for a great company as a driller or an advisor/trainer in the mining field or similar:(Exploration or other). My experience with and knowledge of drill bits may be of significant value to your company if many of your drill bits fail prematurely from broken or missing carbides.

I am a 29 year old white Kenyan. I am a Logistics consultant specializing in Warehousing and Mechanical handling training.

Past 20 years I been working as Document Controller, at present working for Saipem UK ltd as Senior Document Controller.

Over 30 years of Management/Supervisory experience in drilling and production of oil, gas and geothermal. With a total of 35 years of experience:

•Over 20 years of experience. •DCS- Delta-V , Foxboro I/A system and YOKOGAWA . •PLCs- Gould Modicon, Askawa, August Systems, HIMA etc. •Foundation Field Bus •Analytical systems Design and Engineering - Physical Property Analyzers, NIR •Field Inst. Engineering. •System commissioning.

Company representative on sales negotiations and jobs. Coil Tubing Operator on OTIS coil tubing unit. Heavy equipment maintenance, boilers, pumps, compressors, and turbines.

underground driller operater

EPC Project Contracts 'Interface/Liaison' Administration Specialist

I am interested in exploring the possibility of Employment through your Organization. My background includes substantial Experience of 5 Years as Mud Engineer in MB Petroleum Services LLC - Muscat, Oman, Saudi Arabia, Mozambique and India.

I, Rajesh Nandy, is having Diploma in Mechanical Engineering. I have total 09 years hands on experience in gas engine based power plant. I was started my career as Service Engineer in Gas Engine. Now my present role is Deputy Service Manager in abroad under one MNC company. I have an all sort of fie

Solid knowledge of Microsoft Office Suite, CoralDraw, Foltran, Qbasic, Visual Fox Pro and Mathcad, Autocad, Staad Pro, Sap 2000, Advanced knowledge of VISUAL BASIC applications for EXCEL, ACCES, WORD, POWER POINT, AutoCAD and STAAD PRO, electronic mail and Internet.

I am a Health, Safety and Environmental Engineer presently working for EEI Nouvelle Caledonie/INCO Australia Management Pty, Ltd here in New Caledonia. I have been working as Safety Engineer for more than 5 years. my contract here will end by end of December and i'm looking now for my next job.

Petroleum Landman

Fifteen years of experience in piping construction and piping engineering activities related to projects for oil production facilities, oil refining and industrial plants.

B.Eng in Chemical Engineering; Diploma in Mud (Drilling Fluids) Engineering.

Diploma in Mechanical Engineering, Diploma in Industrial Safety from Central Labour Institute- Mumbai, H2S Awareness & Rescue Operation, Safe Journey Management, Road Safety Management, Job Hazard Analysis, Permit to Work System, Gas Testing, Incident investigation & Accident reporting.

I have worked for multinational and International companies in the Middle East like General Dynamics, Babcock & Wilcox, and Delta Corporation. I look for a job as QA/QC Engineer/Specialist or Plant Manager.

Eleven plus years of providing Environmental Management and consulting services experience in Asbestos and Lead Abatement Surveys/Designs/ Monitoring, Health & Safety, Emergency Response, Water Quality Management, Hazardous Waste Remediation, Industrial Hygiene, and Indoor Air Quality.

I have 15+ years experience as an Instrumentation & Control Systems Design Engineer along with seven years I&C construction and commissioning experience at locations throughout the globe.

Experienced and degree Safety Engineer. Wish to utilize experience and skills to reduce accidents, eliminate and control hazards, lower Workers Comp costs, and develop a Safe Production Program that contributes as a Profit Center.

Jean-Francois Zaky is a construction manager in a well-established construction company in Houston, Texas. Mr. Zaky has more than 11 years experience in the construction business. He is a U.S. citizen born in Houston, Texas. Mr. Zaky speaks fluent Arabic language.

I have varied experience earned through honest means in Chemical, Oil & Gas, Petrochemical , Water treatment and other related areas by hard work, sincerity, dedication, team spirit and conviction.

Degreed Construction Superintendent for both Commercial and Residential projects with over 15 years of experience.

To secure a challenging position in the areas of Geographic Information system (GIS), Marine GIS, Remote Sensing (RS), Digital Photogrammetry, Nautical Charting, Electronic Navigational Charts (ENCs), Digital Cartography or Geophysics

A Mechanical Engineering PhD graduate seeking engineering and research work as a Mechanical Engineer.

•Ability to solve petroleum production problems involving design of petroleum production facilities •Engineering and project management experience in the oil industry •Strong planning, communication and presentation software skills

15 years experienced Mud engineer. Drilling fluids design, testing and well site engineering. Solids control equipment management

A Management position in an environment that offers quality-working opportunity in the fields of Photogrammetric Engineering & GIS and , in return, invest my long-term experiences, interpersonal skills, talents and abilities.

Drilling Engineer with 12 years of experience in drilling and workover supervision, including 2 years of well construction planning. Also 1 year of work as a Safety Engineer.

1 Six years of marketing experience specializing in petroleum products (industrial and automotive fuels and lubricants). 2 Over twelve years of mining industry experience, eight of which as Senior Geologist. Four years of project management.

Over 12 years of experience as research and mining engineer with experience in coalmine excavation, mine safety control, old mining area remediation, and rock mechanics. As a software engineer of AutoCAD, MDT, and GIS.

Electric Technical Officer (ETO)

I have over 11-year field exploitation and G&G Modeling and reservoir simulation experince and extensive competency in reservoir management, economic evaluation, reserve estimating and booking, risk analysis, welltest interpretation, well perfomance analysis and stimulations.

Heavy Equipment Operator

Bilinhual: Spanish / English, Computer Literate, International Experience.

Senior Civil / Structural Designer

Well engineering, daily drilling operations supervision, services coordinator

Registered Safety Officer (IBOESH, USA), Registered Civil Engineer-Philippines, IASP, IADC, RIGPASS Certified

Slick Line Expert.

Ability to design & detail automation for DCS systems and other interfaces.

SENIOR PLANT OPERATOR

I possess technical skills which includes the use of data anaylsis softwares, microsoft office applications and excellent communication and interpersonal skills. For that of my qualifications, i had BSc in geology and also MSc in Applied Marine Geoscience

Smart Plant Administrator,-Administration, spec,OracleDatabase, Workshair, Project Execution

I grew up in the United Kingdom and educated in Europe and the Mediterranean, I am fluent in English written and spoken and I have the ability to learn languages fast, and have an open mind to learn new programs and system, I am loyal and honest and hard working and love to work under a fast pace.

Arc welding all positions all 60 series, 70 series, and 80 series welding rods. Torching and brazing. Rigging of all materials over head either from crane or chain falls or sky track indoor and outdoor. Certified in erecting scaffling. Excellent in layout for installations. Certified in rigging, aer

Civil Engineer specialized on Structures working towards Masters Degree.

First Prev 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 [ 116 ] 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 Next Last

Seach Parameters


Goto Advanced Search...
Keywords: (e.g. mining engineer)		Find results with:

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out