Resume - Mine Engineer / Mine Manager

Misco Jobs

Resume #76977

CONTACT INFORMATION:
View contact information...

EDUCATION
University of Utah, Salt Lake City, Utah, USA
Bachelors of Science, Geological Engineering
Bachelors of Science, Mining Engineering
Masters of Science in Mining Engineering

PROFESSIONAL
Professional Engineer Registration (EIT): Utah – 295597, Pending Exam
Professional Geologist Registration: Utah – 295597-2250
Certified Underground Mine Foreman - State of Wyoming
Certified Mineral Appraiser (AIMA - Associate Member)

Member, Society of Mining Metallurgy and Exploration (SME)
Member, International Society of Explosives Engineers (ISEE)
Member, South African Institute of Mining and Metallurgy (SAIMM)

EXPERIENCE

Operations Manager – Reclamation Division
* Operations Manager for multiple large-scale earth moving projects throughout Arizona, New Mexico and Colorado.
* Responsible for orchestrating all aspects of materials, equipment and manpower
* Responsible for 10 direct +250 indirect reports depending on the Project scope
* Responsible for multi-million dollar project estimating ($1MM to $85MM), budgeting and sequencing.
* Long and Short Term planning for multiple operations
* Management of all special projects, coordinate and liaise work with outside consultants, contractors, and services for various on-site activities.
* Procurement of all operation equipment and capital needs.
Freeport-McMoRan Copper & Gold (formerly Phelps Dodge Mining Company)
Reclamation Services Division
Phoenix, Arizona
February 2006 - Present

Mine Manager
* Mine Manager for large-scale limestone quarry – 4.2 million tons in combined ore/waste annual material movement
* Responsible for all aspects of material movement ranging from drilling and blasting procedures, to proper crusher and screening operation
* Responsible for 3 direct and 22 indirect reports
* Responsible for multi-million dollar budgeting and all mine related consumables from explosives to crusher and screening materials
* Long and Short Term planning for multiple open pit operation
* Management of all special projects, coordinate and liaise work with outside contractors for various on-site projects
May 2005 – December 2005

Sr Geotechnical / Mining Engineering Consultant (surface/underground)
* Geological assessment and geotechnical evaluation for highwall stability for large-scale limestone quarry expansion - Kentucky
* Long and Short Term planning for multiple open pit operations - Kentucky
* Updated geological reserves and evaluated mining operations/process plant expansion for 98-million ton life-of-mine open pit/dredging operation – Indiana
* Calculated and modeled geological reserves and evaluated industrial mineral potential using deepwater dredging equipment (Gemcom) - Ohio
* Completed pre-feasibility study, geological assessment and long-term mine plans for the commercial sale of high quality feldspar products (Gemcom) - Virginia.
On going projects include;
* Project Manager for the Reclamation and hazard mitigation for abandon and historic surface and underground mining operations for the state of Wyoming, including; State-wide site Investigation, inventory, survey and engineering designs related to multiple mine closures - Wyoming Department of Environmental Quality, AML. Projects 10B-II: Phases I and II, and 17-I,
* Project Engineer for Large-scale mountain top removal (1-billion ton) dragline scenarios for improved environmental mining practices. US EPA, Washington D.C. –
* Project Management of special projects, coordinate and liaise work with outside sub-contractors for the development of new underground mines in the Ohio Valley
* Scheduling and overseeing client operations and activities in order to best utilize manpower, material and facilities
* Produce computerized mine maps and sections for mining clients and governing management and agencies.
* Advise upper level management on utilization of Company equipment and assets
Morgan Worldwide Consultants
Multiple Mines (various commodities)
Lexington, Kentucky
January 2002 – May 2005

Independent Consultant - Geotechnical/Mining (surface/underground)
* Geological drill hole analysis, including scheduling to logging
* Mining claim research and investigations
* Geotechnical investigations for underground stope design and layout
* Long and short term planning of narrow vein gold mines
* Management of ore control, grade system and U/G diamond drilling crews
* Management of underground construction crews and scheduling
* Classify and recommend areas for development based on geological modeling
* Scheduling and overseeing operating activities to best utilize manpower, material and facilities
* Long and short-term mine planning for Open-Pit mines and dual dragline operations
* Supervise and oversee ore control, grade system and milling and mining crews
* Classify and recommend areas for future development and areas for reclamation
* Produce computerized mine maps and sections for operations personnel/managers
* Managed special projects, coordinate and liaise work with outside sub-contractors
* Advise upper level management on utilization of Company equipment and assets
* Initiate maintenance and repair requests, recommend equipment and process changes to maximize efficiency and reduce downtime.
Various Mining Operations (Au – Ag, industrial minerals)
Mother Lode District – Northern California
December 2000 – December 2001

Contract Mining Engineer – Production (underground)
* Responsible for all underground production parameters for a 35k tpd mechanized block cave operation, duties include:
* Geotechnical investigations and long term planning of mining activities related to production, i.e., drawpoint spacing, stope and undercut design parameters, support recommendations, seismic potential etc
* Long-hole drilling and blasting procedures, this includes all engineering parameters needed to optimize results and efficiency, i.e., charge density per hole, timing, pattern layout and design, over-break control, blast vibration etc
* Raisebore design and layout, liaised with contactors for schedules and supplied added support when needed
* Long and short term planning of undercutting and drawbell opening sequence
* Managed ore control grade system and sampling crews
* Compare actual tonnes to forecast projected by computer software (Gemcom PCBC)
* Classify and Recommend production drawpoints for repair and/or closure
Freeport – McMoRan Copper & Gold
Underground Operations, DOZ mine (Cu – Au)
Tembagapura, Irian Jaya, Indonesia
December 1999 – December 2000

Sr Geotechnical Engineer - Drill and Blast (underground)
* Responsible for all underground drilling and blasting operations for a multi-level mechanized block-cave operation, duties include:
* Long-hole drilling and blasting procedures, this includes all engineering parameters needed to optimize results and efficiency, i.e., charge density per hole, timing, pattern layout, over-break control, etc
* Developmental drilling and blasting, i.e., timing, pattern, charging, over-break, etc.
* Equipment and Supply procurement related to drilling, charging and blasting
* Geotechnical investigations for, and long term planning of, mining activities ranging from development to production, i.e., drawpoint spacing, stope and undercut design parameters, etc
De Beers Consolidated Mines Ltd.
Premier Mine (diamonds)
Cullinan, South Africa
May – December 1999

Sr. Geotechnical Engineer (underground)
* Geotechnical Section Head and Manager for a team of seven
* Responsible for the geotechnical activities of six underground mines that comprise the Kimberley Mines group, duties include:
* Slope stability of open pits ('glory-holes'), mine de-watering of surface and sub-surface, rock mechanics instrumentation implementation and monitoring
* Geotechnical investigations and long term planning for mining activities ranging from development to production, i.e., drawpoint spacing, stope and undercut design parameters, etc
* Design of reinforcement and support systems for all development as well as the ongoing rehabilitation of older areas,
* Installation supervision of grouted rock and cable bolts, as well as the application of shotcrete and other support media
* Geotechnical issues governing surface and underground blasting, i.e., timing, pattern, charging, over-break, etc.
* Management of efficient draw-control systems, related to multiple level block-cave mine operations
* Quality control of underground concrete and shotcrete, including structural integrity and time related strength parameters
* Reporting of changing surface and underground geotechnical issues to various governmental and local agencies
* Trained in complex computer software, e.g., Gemcom, AutoCAD, PFC, FLAC (limited), Visual Basic, etc.
De Beers Consolidated Mines Ltd.,
Kimberley Mines (diamonds)
Kimberley, South Africa
June 1997 – May 1999

Mining Engineer (surface)
* Planned long and short-term open-pit mining schedules
* Compiled and generated End-of-Month volume calculations for bonus payment scheme and smelter reconciliation
* Generated short-term mine plans using MEDsystem mine planning software using real-time assay values
* Determined NSR cut-off pit using MEDsystem mine planning software
* Compiled detailed structural and geologic plans of the mining operations using AutoCAD and MEDsystem software
Rio Tinto – Kennecott Minerals
Flambeau Mine (Cu – Au)
Ladysmith, Wisconsin, USA
1996

Mining/Geological Engineer (surface)
* Assisted with geological and mining data interpretation for various exploration projects
* Researched and logged geological field samples and other related information
* Entered and organized geological data into exploration network and database
* Digitized geological information using AutoCAD for MEDSystem block modeling and ore body analyses
Rio Tinto – Kennecott Exploration Company
Corporate Office (Cu – Au)
Salt Lake City, Utah, USA
March 1993 - June 1996

Mining Engineer (underground)
* Underground LHD production scheduling
* Maintained efficient block-cave draw-control systems database
* Completed underground blast efficiency and vibration studies to minimize structural damage
* Monitored blasting procedures for drawpoint hang-up control and recommended blasting plan of action
* Monitored and recorded hang-up frequency in drawpoints and drawbells for ongoing fragmentation analysis
* Collected and evaluated drawpoint ore/dilution data
Codelco-Chile, Division El Teniente
El Teniente Mine (Cu – Ag – Au)
Rancagua, Chile
1995

Mining/Geotechnical Engineer (surface)
* Completed large-scale open-pit blast vibration study based on geotechnical domains
* Monitored daily production blasting for peak particle velocity and structural damage
* Collected and analyzed routine daily and weekly geotechnical field data
* Monitored and recorded in-pit geologic events, e.g., slope failure, etc.
Rio Tinto – Kennecott Utah Copper
Bingham Canyon Mine (Cu – Au – Mo)
Salt Lake City, Utah, USA
1994

NOTABLE EVENTS
* Selected as one of ten international mining engineers for Codelco-Chile, S.A.
* Toured all major ore deposits and mining operations of Northern Chile, S.A.
* AutoCAD Course Lab Instructor, University of Utah, USA

PAPERS PUBLISHED
* "Numerical Modeling of Large Scale Block Cave Physical Models"
M.Sc. Thesis, pp. 307
* "Numerical Modeling of Large Scale Block Cave Physical Models using PFC2D"
Society of Mining, Metallurgy, and Exploration
* "Numerical Modeling of Large Scale Block Cave Physical Models using PFC2D"
(Accepted for publication, 11/97) International Journal of Rock Mechanics

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 201 to 250 of 15509)

Go to Search Parameters...

Brief Description

M.Sc Geology specialization in Geophysics. Certicication in Advanced Professional Geophysics from Germany. Frofessioonal experiencein seismic data acquisition and interpretation. Geological and geophysical project evaluation and decision making on technical and financial proposals.

More than 20 years in technical and HSE field, Senior Management Position, Presently working as HSE coordinator for a Multinational Oil field company at Oman

Project,Resident,Engineer,Coordinator,Administrator

I am a seasoned, experienced geophysicist/geoscientist & explorationist, and am updated with the latest technology, with in-depth experience in geophysics, as well as geology. I seek a suitable position in oil & gas G & G.

TOP MANAGMENT PROFESSIONAL Oil & Gas Onshore and Offshore Drilling ~ Power Projects Management ~ Materials & Contract Management

Free Lancer Nace Certified Coating Inspector, SSPC Certified Protective Coating Inspector, AWS Certified Welding Inspector, ACA Certified Corrosion Technologist 24 years of exp. in Coating field. Third party experience in Petro Chemical Industry for last 12 years

Instrumentation and electrical , DCS , PLC

EXECUTIVE RELATIONSHIP DEVELOPMENT / CLIENT NEEDS EVALUATION / INNOVATIVE SOLUTIONS

Chemical Technologist Cum Top Management Marketing Professional With 23 Years Experience In Speciality Chemicals ,Dyes ,Pigments, Waterbased Acrylic Emulsions Applicable To Textile , Paint ,Leather , Paper , Plastic & Polymer Industries.

HYSYS/PROII/NGL/LPG/LNG/SYN GAS - CONCEPTUAL, FEED AND DETAIL - REFINERY, NATURAL GAS, CRYOGENIC PROCESS, SOUR GAS REMOVAL, ADVANCED PROCESS CONTROL (APC), GASFICATION (BtL, CtL and GtL). DISTILLATION AND REACTOR. HYSYS/PROII/ Distillation/Separation Sequence/Pinch Analysis.

HVAC FOREMAN

Chemical engineer with MBA and over 20 years of process engineering experience.

Drilling supervisor onshore with a good experience in multilateral wells.

22 years experience in maintenance , compressor , generator , pump , drilling equipment , machine shop service , manufacture , inspection service , production , wire line , fishing tools , welding work , commissioning.

Process/Commissioning/Start-up/Operation/Exploitation/Engineer

Condition Monitoring, Reliability Engineer

HSE-Engineering Graduate, P.G. Diploma in Industrial Safety, NEBOSH ,Ecology & Environment, Lead Auditor OHSAS 18001, specialized in Process and project Safety Management, Safety Auditor, Emergencies Planner, Advance Experience in the Management of Major Accident Hazards Controller and Trainer

Free! Geologist with 20 years experience in minerals exploration & oil and gas industries.

Pipeline, Piping & Mechanical Equipement design and construction support

Worked in exploration, production and academia

Pressure vessel design engineer, Proficient with: SolidWorks, Inventor, Pro/E, AutoCAD, Algor, ANSYS, COSMOS, Matlab, Compress Codeware, Intuitive ERP; Proficient with ASME Code VIII, Div. 1 & ASME Code VIII Div. 2, B31.3; kill at using the knowledge in WRC107 & WRC279

Exploraton Geologist, energy, base, and precious metals. Advanced degree, international experience

Highly skills reservoir engineer with 18 years E&P experience and a Masters in Petroleum engineering Degree. Experience includes reservoir simulation, water flood design and management, EOR techniques, Heavy oil development, reserves evaluation, well test design and analysis & reservoir management

Involved in planning, designing & construction of different building. Electrical, water & sanitary lines. Acquired experience in administration & accounts.Implemented & executed several projects successfully.Eperienced in purchases,entering into contracts,quality control, payment to contractors etc

19 years experience in the Oil Industry with both service company & operators in UK, Oman, Australia, Brunei, Saudi, and Malaysia. Experience in Field Development Geology and geocellular modeling.

Position: Senior Instrument Engineer / Qualification: Master of Science (Electronics) - Queen’s University of Belfast

Professional Engineer with 19+ years of experience in engineering and project management, including design, sizing, and specification writing of various static and rotating equipments.

A seasoned completion/well intervention/well test professional with 18 years of experience with expertise in sand control, intelli.

Sr. Geologist with strong project management experience

the position of Chemist and subsequently to put my contribution for the growth and development of the company by utilizing my best efficiency and skills and to achieve my further career advancement opportunity.

first class marine negineer

Strategic Business Driver and Results-Driven Leader

Experienced Principal/Senior Control Systems Engineer who can contribute significantly to your company.

20 Years experienced in Materials Mgt. specially in Procurement mgt.

This letter is to announce my interest for a position corresponding to my career profile: mining engineer.

I submit my application for the same.For the Eighteen years , I am working with Reliance Industries Limited Hazira Complex. During this period I was involved in setting up different laboratories , e.g.Water Laboratory,MEG Laboratory,PVC/VCM Plant Laboratory,Polyethylene Plant Lab,Polypropylene

MS in Petroleum Engineering, 20+ Years experience as Reservoir Engineer. Skilled in Reservoir simulation, Field Development Plans and Well & Reservoir Management.

25 years experience and Product knowledge

A highly qualified, Geologist / Mineral Exploration Analyst having extensive experience in mineral reconnaissance and exploration, geochemistry lab analysis, and statistical mapping earned with major employers in China, and for the past 6 years with De Beers Canada. As a Geological Engineer and Proj

Electrical and Power System Engineer with over thirty–one years of experience in the field of MV and LV power system related equipment.

A proactive and enthusiastic individual with 17 years of extensive expertise in the field of offshore positioning/navigation/geophyscial/pipeline/hydrographic survey.

Sailed for lasat 18 years on board Chemical, petroleum, OBO and Bulk carriers. Extensive experience on drydocking and repair yard. Completed conversion of a ship to FSO at Keppel Shipyard.

Sequence Stratigraphy, tectonic, pre/post-stack seismic attributes, petrophysic, static reservoir modeling, fracture modeling

I have 18 years experience in Oil & Gas Industry.Experience in completion execution: Completion activity and workover operation, Well Testing (Oil / Gas), Gravel Pack, Gas Lift, Submersible Pumps, Perforating Technique, Well Stimulation (Acid / Frac), Cement Squeeze Operation.

Mine Engineer / Mine Manager

Experience in the area of Laws, Regulation & Compliance(Air, Waste Water, Hazardous Waste, Environment), Monitoring & Analysis(Air, Waste Water, Hazardous Waste, Environment), Pollution Control & Treatment

Well-developed interpersonal skills.

Process Engineer/Metallurgist/Consultant - Mineral Processing, Hydrometallurgy, R&D - MS, PE, 20-years operating experience; precious metals expert.

Senior Process and flow assurance engineer with full project cycle experience.

To secure a challenging Senior Management position within a progressive reputed organization, which facilitates professional growth and utilization of my architectural qualification and experience, while embracing new methodologies & strategies to remain competitive in the market.

First 1 2 3 4 [ 5 ] 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Goto Advanced Search...
Keywords: (e.g. mining engineer)		Find results with:

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out