Misco Jobs  |  Go to Job Seeker's Center »»   |  
 
«« previous resume Resume #77026 next resume »»
CONTACT INFORMATION:
View contact information...

PROFESSIONAL EXPERIENCE
Having 25 years cumulative experience as a Shift Incharge and Panel Operator in the field of operation & Commissioning of Refinery and petrochemicals.

EXPERIENCE SUMMARY
Having Commissioning and Operation experience of following units.

1 Lube Base Oil Project, Vacuum Distillation Unit.
2 Cross Country Multiproduct Pipeline & Storage Tank Terminal.
3 Gas Gathering Station.
4 Diesel / Kerosene Hydrotreater.
5 Amine Absorption & Amine Regeneration.
6 Sulphur Recovery.
7 Sour Water Stripping
8 Formaldehyde
9 Hexametylene Tetra Ammine (Operation).

JOB PROFILE
1 Involved in Pre-commissioning activities such as Water Flushing, Air Blowing, Cardboard Blasting, degreasing, chemical cleaning, refractory dry out including system dry out, Catalyst Loading activity.
2 To perform mechanical run test of pumps and compressors with Vendor.
3 Checking the plant with respect to P&ID.
4 Co-ordination of various DCS and Field operations for commissioning of the units at various levels for the timely execution of the allotted jobs.
5 Involved in Control valves stroke checking, loop, checking, logic checking and graphics correction as per P & ID in co-ordination with instruments department.
6 Safe start up and shut down of the plant, maintaining process parameters without deviation to maximum extent.
7 Stabilizing the plant during emergencies and trouble shooting.
8 Involved in Guaranty Test Run of the unit and to provide training to local employees.
9 Manpower handling, Planning for day-to-day production to meet customer's requirement.

EXPOSURE TO FOLLOWING PROCESS EQUIPMENTS.

* Distillation Column * Vacuum Distillation Column
* Heat Exchangers * Steam Strippers * Waste Heat Boilers * Feed Filters
* Motor Operated Valves * Vacuum Evaporators
* Reciprocating Compressor * Centrifugal Compressors
* Reaction Furnace * Pig Launcher and Pig Receiver
* Natural Draft Gas Fired Charge Heaters
* DCS Control System-Fox Boro
* DCS Control System - Honey Well (TDC 3000)
* DCS Control System – ABB (Adva Control)
* DCS Control System –Yoko Gawa (CS 3000)

Experience Details
1) From June 2008 to Till Date
Presently working with M/S Larsen & Toubro Limited as a Commissioning Supervisor for pre-commissioning, commissioning and operation of the LUBE BASE OIL PROJECT (Vacuum Distillation Unit) at Melaka - Malaysia.

2) From September 2007 to February 2008.
Worked for DODSAL ENGINEERING & CONSTRUCTION (P) LTD, as Commissioning Engineer for Inter Refineries Cross Country Multiproduct Pipeline Project and Tank Farm with zero slop philosophy, at ADNOC (TAKREER) Mussafah, Abu – Dhabi Terminal.

3) Worked for M/S Larsen & Toubro Limited for pre-commissioning, commissioning and operation of the following projects.

a) From December 2006 to May 2007.
Worked for commissioning and operation of the L. P. Gas Booster Station (HUP) at Abu Dhabi Gas Company (GASCO Bu Hasa), Abu Dhabi – UAE, as a Commissioning Engineer / Panel Operator. The unit having two trains with capacity of 32MMSCFD each. Here I was involved in Process Guaranty Test Run.

b) From May 2006 to November 2006.
Worked for pre-commissioning of the NAPTHA HYDROTREATER (699TMTPA) & ISOMERIZATION (515TMTPA) unit, UOP Process. at MANGLORE REFINERY & PETROCHEMICALS LTD. MANGLORE (Karnataka) - India, as a Commissioning Engineer.

c) From October 2005 to January 2006.
Worked for commissioning of the SULPHUR RECOVERY unit having capacity 50.00MTPD at TAKREER (A Division of Abu Dhabi National Oil Company) Ruwais refinery, Abu Dhabi – UAE site, as a Panel Operator. ORTLOFF USA technology. Here I was involved in Process Guaranty Test Run.

d) From September 2004 to October 2005.
Worked for commissioning and operation of the SULPHUR RECOVERY UNIT, SOUR WATER STRIPPING UNIT and AMINE TREATING UNIT at BHARAT PETROLEUM CORPORATION LTD. MUMBAI Refinery (India), as a Commissioning Engineer / Panel Operator. The SRU plant was having two trains bearing capacity of 70 MTPD each. DELTA HUDSON Canada technology.

e) From August 2003 to February 2004.
Worked for pre-commissioning, commissioning and operation of the DIESEL / KEROSENE HYDROTREATER and AMINE TREATING UNIT of INDIAN OIL CORPORATION LTD. Digboi – Assam refinery (India), as a panel operator. The Hydrotreater plant was having capacity 0.33 MMTPA with 104 Kg/cm2g Hydrogen pressure. UOP process.

4) From April 2002 to July 2003.
Worked for M/S TECHNIP COFLEXIP LIMITED & M/S PROJECTS & DEVELOPMENTS OF INDIA LIMITED, as a Panel Operator, for the commissioning and operation of the DIESEL / KEROSENE HYDROTREATER unit at INDIAN OIL CORPORATION LTD. Guwahati- Assam Refinery (India). The unit capacity was 0.6MMTPA with 81Kg/cm2g Hydrogen pressure. UOP process.

5) From June 2000 to July 2001
Worked for M/S K. T. INDIA LIMITED as a Commissioning Engineer / Panel Operator for the commissioning of the DIESEL HYDROTREATER Unit of HINDUSTAN PETROLEUM CORPORATION LIMITED Mumbai Refinery (India). The unit capacity was 1.5MMTPA with 39Kg/cm2g Hydrogen pressure. UOP process.

6) From May 1998 to May 2000
Worked for M/S SAUDI FORMALDEHYDE CHEMICAL CO. LTD. Al-Jubail (KSA), as a Shift – Engineer. The company was engaged in the production of Aqueous Formaldehyde (AF-37), Urea Formaldehyde Concentrate (UF-85), Hexa Metylene Tetra Amine. Haldoor Topsy Technology.

7) From April 1982 to May 1998
Worked for M/S MOHATTA CHEM (P) LTD. Roha Dist. Raigad (India). Here I joined as Junior Production Chemist and resigned as a Shift Incharge. The company was engaged in production of Aqueous Formaldehyde, having two units with two different technologies. Capacity of each unit was 50 MTPD.
I was a member of commissioning team during commissioning of second Formaldehyde Unit. This was the first unit in India with latest technology. Cora Engineering Technology.
The First Unit was being operated above HEL of Methanol air mixture and The Second Unit was being operated below LEL of methanol.

7) From April 1980 to April 1982

Worked for M/S JAYCEE CHEMICALS (P) LTD. Taloja, Dist. Raigad (India), as a Production Chemist in the Bulk Drugs producing unit such as Para Nitro Benzoic Acid, Di-Chloro Benzoic Acid, Para Chloro Benzoic acid.

PERSONAL DETAILS
Date of Birth: 10th July 1957.
E. Qualifications: B. Sc. Chemistry
Marital Status: Married
Nationality: Indian
Language Known: English, Hindi, Marathi

View contact information...
«« previous resume next resume »»
Search Results (Resumes 651 to 700 of 15508)Go to Search Parameters...
Brief Description
Exploration ,Mining
Advanced Process Controls, RealTime Process Information Systems, LIMS
PROJECT MANAGEMENT, CORROSION & MATERIALS,INSPECTION & INTEGRITY ENGINEER/MANAGER
More than eighteen years of experience in premium International Oil and Gas Engineering Consultancy Companies within the field of Process Safety, Technical Safety and Loss Prevention.
A Graduate Civil Engineer of 18 years experience (10 years in Kuwait & 8 years in India) in various levels in the field of Project Management and Construction, at present working with Kuwait National Petroleum Company¡¦s Project Department On Secondment basis.
Mechanical Engineer with expirience in Operation and maintenance. Can operates Forklift and Superstacker (Bureau Veritas Certified), Driving, Computer Literate, Auto cad.
Bsc in Marine engineering - holder of Certificate of Competency, grade CHIEF ENGINEER STCW 95-diploma of ship superintendency(Lioyds). Working 5 years as ship tech superindent Prior accepting this job, I had 13 years of sailing experience in different ranks which includes 5 years as Chief engineer .
well services, production technology, safety, beam pump
To work in the field of latest technologies to amalgamate with the nature.
B.SC. HONS, APPLIED BIOLOGY
Licensed Professional Engineer, performance oriented, with extensive broad-based experience in multidisciplinary projects. Particular expertise in Instrumentation and Control Systems Engineering for Chemical and Oil & Gas Industries. Supervision of complex detailed Engineering and Procurement.
Highly experienced senior manager in exploration, new ventures, reservoir management and optimization of exploration and production portfolios in conventional oil, gas, and heavy oil. CEO and president level recognition for exploration and reservoir management results.
Engineering Document Management/Control
Reservoir Geologist  To perform characterization Reservoir integrated Studies and reservoir Modeling. Generation and evaluation Geological Prospects and development opportunities. Elaborate Exploitation Plans. Planning (targets) and monitor of Special Wells. Volumetric reserve estimations.
Seeking senior level assignments in Plant Operations, Project Management, Operations & Maintenance and Installation & Commissioning with a reputed organization.
Primavera, MS Project, MS Office, EVMS, Planning
Versatile technology professional with expertise as a Senior Reservoir Engineer and Operations Business Manager. Resourceful problem solver who performs well under pressure. Outstanding leadership, organizational, and communication skills. Granted Top Secret Security Clearance. Analytical.
More than 13 years of multi-international reservoir engineering experiences in gas and oil developments from sandstone and carbonate in land fields and offshore,including different stages of appraisal and development planning & management, well test, reservoir characterization & simulation, economic
A registered Professional Mining Engineer with 25 years of progressive experience in surface, underground and overseas operations.
Has almost 25 years experience in assay laboratory operations in gold and copper mine in several mining company in the Philipines and abroad
Knowledge in mine engineering and development coupled with numerous years of collaborating closely with mine site construction teams. Proven expertise in mine production, administering stripping contractors and project evaluation.Mine safety, sound budgeting, forecasting and knowledge of surveying.
SmartPlant 3D/P&ID Application support
I wish to apply for suitable position in the highly motivated & challenging environment. I am having 21 year of experience in different fields of Gas, Petroleum and Chemical industries. Also involved actively involved as an engineering material coordinator. I am having experience in identifying
Skill: Auto CAD; Solidworks...Mechanical bachelor degree
More than 20 years experienced in project design services which involved mechanical and piping design preparation of conceptual design packages and detailed design packages, specification of pipes, fittings, valves and other specialties. Developed specifications for pumps, steam turbines, tanks, pre
Chemist / Metallurgist - Forte is gold analysis and extraction
Experienced Banker
Working as a field operator now. Worked as a pre-commissioning, commisiioning operator and as a chemist also.Pre-commissioning, commissioning activities, start up and shut down activities also.
Project / Commissioning Manager (Bachelors Degree / Professional Registrations)
Almost twenty years experience in both surface and underground mining in Ghana, Africa.
20 Years Experienced : Collaborated Manufacturing Unit : Corporate Planning ;Process/Product Testing&Comercialization;Environ Promotion & Risk Management ; Environ Assesment & Control ; Environ Quality Perform of Supplier ; Customer Satisf. Inventory Supply Chain &Logistics ;HR;ISO9001,14001 &18001
Experienced in general building, electrical and mechanical construction and installation, mechanical/electrical engineering supervision, and construction accounting.
To work as an Instructor/Trainer/Lecturer in Teaching and Technical Fields wherein I can utilize my qualifications and experiences. I am confident of my own capabilities and I am always dedicated to improving my performance and techniques in educational fields.
Have more than thirteen years of experiance in log interpretation
A total of 15 years of professional work experience, (9) years in the Gulf region, of which seven years Were in the oil/gas, petrochemical, power/desalination plant and building construction projects. A Computer literate and proficient in oral and writing English communication skills.
Senior Financial Analyst with a background in IT and Finance. I have experience in JDE world, JDE one world and SAP System Accounting software. I have enhanced my knowledge in SAP, being involved with the system conversion from JDE to SAP at UFA from July 2006 to August 2008.
Experienced exploration/wellsite geologist
Geophysicist position in a oil-field services company. I have more than 18 years of seismic data processing and data management experiences.
Welding Inspector, CSWIP 3.2, ASNT-II Certified, 18 Years working experience in Oil and Gas Industries in various countries.
Has 20 Years Expeierence in various aspect of Control and Automation and last 7 years in Middle East with ABB /Invensys. Has done large projects and several latest DCS/ESD systems such as Triconex,ABB infi90 , Foxboro I/A , Honeywell TDC3000 etc
I am qualified Degree chemical Engineer from the reputed Maharaja Sayaji Rao Uni, Vadodara
I’ve total of Eighteen (18) years experience in the area of Pipeline design and Piping design for oil & gas and petrochemical projects.
Over 30 years and broad range of experience in oil and gas exploration. Bachelor degree Geophysics/ Geology and MSc degree in Geophysics. Worked in most aspects of exploration, such as seismic survey planning, acquisition, data processing, interpretation, AVO, seismic attributesand seismic inversion
M. Sc. & B. Sc. in Computer Science, USA. Detailed knowledge and practical experiences in general maangement, performance management, Balanced Scorecard, and project Management. Having solid background in IT and business communication.
Expertise in gas sweetening, gas compression, gasification process, and U&O facilities.
Over 16 years experience as Electrical Engineer
I have been a Process Engineer for 16 years. My experience includes process design of oil, gas and petrochemical plants and steam and power generation units, expertise in conceptual design, basic design, FEED and detailed engineering, experienced also in optimization and troubleshooting projects.
Over 20 years experience in chemical, petrochemical and oil&gas industry.
B.Sc. Chemistry degree and having 25 years experience in petrochemicals and refinery in process department
Presently working as Sr APC & Opt Engineer in Qatar Petroleum Refinery. A total of 20 years experience in Petroleum Refinery industry (8 years in APC & Opt, 5 years in Technical Services and 7 years in Operations).
First   1   2   3   4   5   6   7   8   9   10   11   12   13   [ 14 ]   15   16   17   18   19   20   21   22   23   24   25   26   27   28   29   30   31   32   33   34   35   36   37   38   39   40   41   42   43   44   45   46   47   48   49   50   Next   Last
Seach Parameters

Goto Advanced Search...
Keywords: (e.g. mining engineer)Find results with:
Frequently Asked Questions
What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...
Employer's Center


» Employers Home
» Feedback
» Help

» Post Jobs
» Edit/Delete Jobs
» Search Resumes
» Resumes By Email

» My Account
» Log In

» Log Out
 
©1999-2009 Misco Jobs. All rights reserved.  Contact: support@miscojobs.com