Resume - Piping Layout design.

Misco Jobs

Resume #77058

CONTACT INFORMATION:
View contact information...

POSITION DESIRED PDS Piping Designer

OBJECTIVE To secure employment where my education capabilities in mechanical engineering works be utilized for the benefits of the firm and which offers opportunities for development.

WORK EXPERIENCE

PIPING DESIGNER (May 2008 to Present)
Electrowatt Ekono (B) Sdn Bhd
Jaako Poyry Group
Kuala Belait, Brunei Darussalam

Project Involved

Brunei Liquefied Natural Gas Sdn. Bhd
Project Title: New Onshore BOG Compressor
Project Location: Lumut, Brunei Darussalam

Responsibilities Include

ƒæ Piping Layout design for Boil-Off Gas Recovery System within the Fuel Gas Area.
ƒæ Develops Conceptual Layout.
ƒæ Isometric drawing generation, interference detection base on specifications, MTO preparation, plot plan preparations, and piping plan.
ƒæ Preparation of Isometric forstress sketch.
Software used: AUTOCADD 2006

PIPING DESIGN ENGINEER (Sept. 2007 to May 2008)
Shinsheigiken Ltd. Co.
Tokyo,Japan

Supplied to:
Chiyoda Corporation
Yokohama, Japan

Project Involved

QPG Project
Qatar

Responsibilities Include

ƒæ Routing of piping base on Piping specifications and standards.
Provide piping support for non-stress lines and small bore pipes.
ƒæ Isometric drawing generation, interference detection base on specifications, plot plan preparations, piping and instrument diagrams, line list and supplier information.
ƒæ Check, re-check and correct assigned piping models, drawings and isometric based on comments made by Lead Engineer and Checker.
ƒæ Develops complete engineering designs / drawings from P&ID and from information provided verbally, on sketches or on notes.
ƒæ Monitors all work for compliance to project standards, applicable codes, contract requirements, quality standards, discipline standards, and accepted engineering and construction practices.
ƒæ Equipments modeling.
Software used: PDS/SPR/MICROSTATION.

QA/QC Assistant Inspector (Piping) (Dec. 2006 to Sept. 2007)
Advance Polypropylene Project.
SungChang & Al- Shaikh Contracting Co., Ltd.
Al-Jubail, Kingdom Of Saudi Arabia

Responsibilities Include

ƒæ Engage in visual inspection of welding, Monitoring of welding activities, and welding quality appearance.
ƒæ Field inspection for pipe lay-outing as per isometric drawing requirements.
ƒæ Monitoring and inspection of inside pipe cleaning and orifice flange
ƒæ Engage in test package punch list works such as: Line checking, fabricate and install temporarily spool piece, fit up alignment, line orientation, dimension, flange orientation, & heat number.
ƒæ Preparation and Review for Piping Test Packages
ƒæ Checking of pipe test limits and field inspection of testing for hydro, pneumatic and visual as per required pressure.

Drafter II (Jan. 2006 to Dec.2007)
Fluor Daniel,Inc. - Philippines
Petrochemical/Oil & Gas Designing Company
3rd Floor, Asian Star Bldg. 2402-2404 ASEAN Drive
Fil-Invest Corporate City, Alabang,
Muntinlupa City 1781

Projects Involved

TESORO PROJECT
Location: California, USA
(Sept. 2006-Dec. 2006)

Responsiblilities Include

ƒæ Modeling of piping systems base on Piping specifications and standards.
Provide piping support for non-stress lines and small bore pipes.
ƒæ Preparation of Piping Plan Arrangements, Plot Plan and its section Views.
ƒæ Isometric drawing generation, interference detection base on specifications, plot plan preparations, piping and instrument diagrams, line list and supplier information.
ƒæ Check, re-check and correct assigned piping models, drawings and isometric based on comments made by Lead Engineer and Checker.
ƒæ Coordinates with the area supervised Work includes the preparation of isometric drawings for existing pipelines.
ƒæ Develops complete engineering designs / drawings from P&ID and from information provided verbally, on sketches or on notes.
ƒæ Monitors all work for compliance to project standards, applicable codes, contract requirements, quality standards, discipline standards, and accepted engineering and construction practices.
Software used: PDS/SPR/MICROSTATION.

DOW/PIC-OL2K PROJECT
Location: Shuaiba Industrial Area, South Kuwait
Client: EQUATE Petrochemical Co.
(January 2006 - Sept. 2006)

Responsibilities Include

ƒæ Preparation of Piping Plan Arrangements, Plot Plan and its section Views.
ƒæ Monitors all work for compliance to project standards, applicable codes, contract requirements, quality standards, discipline standards, and accepted engineering and construction practices.
Software used: PDS/SPR/MICROSTATION.

Mechanical Design Engineer I (Jan.2005 to Jan. 2006)
Hitachi Ltd, Philippine Branch
10th Floor Tower 2 RCBC Plaza
Ayala Ave. cor Jil Puyat Ave., Makati City

Responsibilities Include:

ƒæ Preparation of fabrication drawing for main steam piping, process piping, yard piping, small bore piping and its specification using Hitachi developed 2D Piping program in AutoCAD.
ƒæ Preparation of pipe support, location and its specification. Preparation of bills and quantity of materials. Preparation of piping fabrication for thermal and turbine power plant drawings with supervision.
ƒæ Familiarization of Piping Instrumentation and Diagram (P&ID), Piping Design Table (PDT), Valve Design Table (VDT) and Pipe line list.
ƒæ Familiarization of ANSI/ASME, and JIS Standards.

Computer Skills v K_cadz, kcadr Hitachi Developed 2D Piping Program in AutoCAD.
v AutoCAD 2005LTi, AutoCAD 2000, & 2006
v Ms-Word, Ms-Excel, and Ms-Power Point v PD Draw v Bentley Microstation v PDS
v MS Access v Smart Plant Review

HONOR and Citation

Registered Mechanical Engineer, Board of Mechanical Engineers
Philippine Professional Regulation Commission (Board Passer, October 2004)
Licensed No. 64564

Spotlight Award
DOW-OLEFINS2 KUWAIT Proj.
Petrochemical/Oil & Gas
Fluor Daniel,Inc. - Philippines

EDUCATION

Mechanical Engineering, 1999-2004
Nueva Vizcaya State Polytechnic College
Bambang, Nueva Vizcaya

PERSONAL DATA
Date of Birth: July 27, 1982
Age: 26
Height: 5 4
Weight: 160 lbs.
Civil Status: Single
Sex: Male

REFERENCES

Available upon request

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 7251 to 7300 of 15477)

Go to Search Parameters...

Brief Description

I am graduated as a mechanical engineer, and working with mi-swaco for almost 3 years. These days trying to improve my career and learn more and more.

BE-Mechanical Engineering;ASNT Level I &II in RT,UT,MPT &DPT;Auto Cad;Experienced in Fabrication and Erection of heavy structure , piping,vessel and Slag blasting & painting.

Piping design engg. iam working with uhdeindia pune. working on PDMS 3D software

Bachlor of engineering in industrial & production,seeking job in project management,skills-primavera.software,ms word,Excel,powerpoint

I am a graduate with Bachelor Degree in Mechanical Engineering from the University of Madras, India. I am having more than2 years Gulf experience in Air–Conditioning and Ventilation (HVAC), Plumbing, Drainage and Fire Fighting, Chilled water Piping Design & Installations. I also count same years o

Construction & oil and gas & auditing

Results-driven Civil Construction Management Professional with extensive senior-level experience in the Supervision, Quality management, planning & programming, design and successful completion of large-scale civil and structural engineering projects worldwide.

I have eight (8) years of experience as Project Support Specialist with expertise in Document Management Control in the field of Engineering & Construction. Work experiences also include exposure in computer related environment such as development of customized application system program utilizing

Graduate in Mechanical Engineering , Certified Welding Inspector AWS CWI, ASNT Level II RT, UT, MT, PT, 10 years experience in welding inspection of Power boiler, pressure vessels, heat exchanger, Power and process boiler piping fabrication. Able to prepare WPS, PQR

I am a qualified mechanical engineer, graduated in 1993. Since than have been working in various projects of Power Plants. Presently, I am working as deputy manager (second to general manager). We are running furnace oil and gas operated power plants.

Has more than 18 years experience in materials, procurement, contracts and project planning & control, performing activities during the engineering, procurement & construction phases.

Third part analysis for field operation, Field Operation responsible, Risk analysis, Supplier responsible, Contact with the client responsible, Well Design Casing Design.

I have passed I T I and diploma electronics & Comm. Engg.with the more than 10 years experience of relevant field

ETP designing,EIA,ISO

Piping Layout design.

Initiating contacts and coordination with Suppliers, preparation and issuing of ITB, compiling and issuance of Purchase Orders according to Shell internal procedures, invoices processing, Preparation of Memos, Letters, and Transmittals to the Subcontractor with English translation

Associate Member: (NIOB) Nigeria Institute of Building (0001397) 2005,,NY.S.C. National Youth Service Corps. 2002- 2003,Higher National Diploma:: Building Const. Technology@Fed. Poly. Nekede Owerri 2000 - 2001

Paper Maker

I'd like to apply for a landman position with your company. Will send you my cover letter and referral letter upon request.

Work on DCS, PLC, Fire and Gas, process control instrumentation installation, commissoning and maintenance, Currently working as Senior Instrument Technician in Ras Laffan Industrial City, Qatar.

I have strong analytical and problem solving capabilities and ability to use initiative. I have a good view about drilling and work over operations very good knowledge about calculations and used to work as a driller sometimes on rig break in drilling rig and work over. This job primarily responsib

I hold the DP Officer Certificate and the Chief Officer Certificate of Competency Class II/2 with a proven track record in either the offshore experience on DSV, Pipelay, AHTS, Survey, Supply vessels and also seagoing on container, bulk and LPG vessels worldwide.

Having eleven years experience in field of Oil , Gas & Petrochemical industry

MS of EE, Bachelors of EE and Mineral Processing Engineering. 5-year work experience as an honored senior engineer in field of coal processing technology; 2-year work experience with marketing management.

Diploma Mechanical engineer + CSWIP 3.1 + NDT ASNT lev II + ACAD + P3

¡§Talented Human Resource Professional with versatile experience and exceptional skills to align human resource capital with corporate objectives¡¨. 10 years diversified and hands on experience in all the core functions of HR.

Natural Gas Treatment and Natural Gas Separation,Utility,Offsite Operator

I have passed bachelor"s degree& have 11 years working experience of utilities operation in oil and gas refinery ,petrochemical and polyester plants.

Excavator, Showell, Dozzer etc. heavy machinery operator with 15 years of experience worked in India, Iraq, Kuwait, Dubai, Saudi-Arabia and Oman.

I posses more than 10 years of experience in Projects Planning, Scheduling, Monitoring and Control in India and abroad on assignments in USA.

Reservoir Engineer, B. Tech (Petroleum Engineering), 11+ years in reservoir simulation studies, development planning, performance review, well equipped with most of analytical aspects

Health, Safety and Environmental Specialist with experience in government regulation compliance and conformance to industry standards.

Mechanical/Piping Engineer with 13 years experience in offshore industry looking for new challenge. Good communication, organisation skills. Team player. Good knowledge of piping and mechanical codes and standards, Caesar II, PV Elite, CodeCalc.

An entry level position where my environmental, health and safety skills and work experience can be utilized to assist a company to further their environmental health and safety program and objectives

An experienced and highly skilled Project Manager with over 10 years of practical experience working in the Project Management field for organizations in the government and the private sectors.

10 years experience in the oilfield Drilling and well services both on offshore and land rigs. Field Engineer experience performing installation and trouble shooting of drilling equipment.

Geophysicist/Geologist/Seismologist/Volcanologist

A B.E. Chemical Engineer with broad ranging experience in Health, Safety & Environment (HSE) in oil and gas sector. proven results to minimize the risk and injury to personnel, protect company’s assets as reasonably and as practically possible.

•A professional with excellent communication, organizational, and administrative skills. •A team player capable of motivating others offering more than 10 years of progressive experience.

Civil Engineer Master in Construction Administration

Environmental or HSE Manager with 13 years industry experience, the past 7 of which have been focused on EMS and HSE-MS for the upstream oil & gas industry. Worked in Australia, Middle East, Sth Europe, West Africa & Russia.

Versatile senior manager with extensive experience in maintenance, operations, and general management in both union and non-union mining and heavy industrial environments seeking a senior management position in either maintenance or operations.

technical and professional experience includes working with environmental regulatory agencies, environmental and industrial consulting, environmental and process engineering, contaminant fate and transport modeling, and contaminant remedial design and implementation.

M. Sc. Geophysicist/Geologist

With more than 12 years in Petrochemical and Paper industry and in various positions and discipline.

OBJECTIVE Find a rewarding position, which both recognizes and rewards performance. A place where someone is able to establish their skills and be capable of learning at the same time.

International Program / Project Manager. Experience of working in Senior capacity within consultant and client organizations. Europe, Middle East and Africa experience. Young, dynamic and highly qualified (BSc, BSc, MSc, MCIOB).

Gold Medalist Environmental Engineer from Regional Engineering College, Surat, Gujarat, India seeking an internship or entry-level position

OBJECTIVE To obtain a management position at an industry-leading company

•10 Years of Experience as Maintenance and Reliability Engineer •Certified Reliability Engineer by ASQ •Certified in NDT by the ASTM •Taught more than 20 courses associated to maintenance and reliability methodologies, training over 300 professionals. •ASQ Member •ASME Member

First Prev 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 [ 146 ] 147 148 149 150 Next Last

Seach Parameters


Goto Advanced Search...
Keywords: (e.g. mining engineer)		Find results with:

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out