Resume - i am the man for your work ,i have run all different kinds of boring mills

Misco Jobs

Resume #77146

CONTACT INFORMATION:
View contact information...

I am writing to you at the suggestion of CAREER builder. I feel that my skills would be a great match for the open position you currently have in your facility.
With over 30 years' experience as a boring mill machinist, I can offer your company both top-notch creative services as well as a strong set of technical skills. In my previous positions has led me to your door and our future.

My goal is to make money for my employer. In turn I expect to be well compensated for my abilities.

I am a CNC Boring Mill Machinist. Note that I did not say operator; for I have never been an operator; but a Machinist.

I started in the Machinist trade in 1974 as an Assembler for two years as I went to night school and studied Machine Tool Operations. I learned from an old Tool and Die Maker. It is ironic as I think back to those days. He said, Dave, you will be one hell of a man in the Machinist trade because you care a great deal and have a high standard of workmanship.

As I progressed in trade school, a position opened up for a Mill Hand at company in Illinois called Hills McCanna. I was the only one who applied and in a week I was taking a 1in. Hog Mill 2in. Iong and I buried it in stainless 316. I was taught by an old Polack. Within two years I was on the Bridge Ports doing small castings; ones that they needed to fill an order. All this time I was looking to better myself. My foreman said, "Dave, you are making me so much money on little toy Bridge Ports its time to move onto Devliegs." This is where I stayed, not at Hills McCanna, but at boring mills. I learned CNC at Accura Tool and Mold on a Matsurra. We had Mazaks and no one knew Fanucs control, Mitsubishi 3000 I taught myself in 1990 and I loved It. I did mold plate cores and cavities, side locks pins and everything.

One thing I did that others could not, was to hold. 0001. It is not easy, but as long as I took it step by step and followed my plan I was great at it. I feel as good as I think I am and that I can be that much better, To better myself. I may say something here that I learned long ago that the machine has to be square to the spindle and that can only be checked by putting an indicater over the spindle on the table and moving the saddle in and out along the spindle and adjusting the saddle up or down lazers do not work good enough in my opinion or down lazers do not work good enough in my opinion. A s you will read I feel I am worth the money that I want which is 25.00 an hour.

Thanks for taking the time to know me I know I would be a great addition to your team.

QUALIFICATIONS: Measure dimensions of finished work pieces to ensure conformance to specifications, using precision measuring instruments, templates, and fixtures. Remove and replace dull cutting tools. Mount, install, align, and secure tools, attachments, fixtures, and work pieces on machines, using hand tools and precision measuring instruments. Listen to machines during operation in order to detect sounds such as those made by dull cutting tools or excessive vibration and adjust machines to compensate for problems.
Adjust machine feed and speed, change cutting tools, or adjust machine controls when automatic programming is faulty or if machines malfunction.
Stop machines to remove finished work pieces, or to change tooling, setup, or work piece placement, according to required machining sequences.
Lift work pieces to machines manually, or with hoists or cranes. Modify cutting programs to account for problems encountered during operation and save modified programs. Calculate machine speed and feed ratios, and the size and position of cuts. Insert control instructions into machine control units to start operation.

Education:

Immanuel Lutheran grade school
Dundee, ill
Graduated 1964

has.
Dundee comm.
Dundee, Il
Grad.1968
Math was my subject
And engines

E.C.C.
Elgin,il
1968-1970
Liberal arts

1974-1977 also at e.c.c. for machine too tech

USAF
1970-1974
Weapons mechanic
2 tours of duty in Vietnam
Honorable discharge

Employment:

1974-1977 hills McCanna
Mills, bridgeports, cinncinatis,kerney and trucker
3.45-6.50 an hour
Moved on for a better opp.

1977-1985
Cary metal products inc.
Carpentersville, ill
This was a great place to work I ran a Bridgeport for a week the owner said to run the devliegs and really make him some money we made printing press machines
I ran wotans devliegs and did internal gear boxes
Intersecting bores at different angles I held them in line within. 0002, first I ruffed them out let. 03 on each side
Then lined them up to finish.everything, from milling square within.0005 I rotated the table and indicated the cut to. 0000,or if it was on an angle I would use the tang,of the angle x length of side I just did this kind of work fascinated me and I excelled to the top of the ladder very quickly:: :::: note:: :: I am not a know it All by no means I learn then I go for it::
I enjoyed my work there >
The place went broke the engeering to develop a much smaller product out of the large products cost the co. millions, t went broke

We started there with 8 people when it went under we had 200

I was a supervisor on nights of 50 machinist my number 1 goal was communication with the employees on my shift then to day shift, communication is the key to making money, for evey new job my shift would have a meeting of the minds, i am sure u know what i mean, then move on the task at hand.
6.50-11-00

Continental can company
West Chicago, ill
1985-1987
15.00-18.00
This is where I shined I held scary close toll.. It was a good plan that helped me thru. First I communicate very well and I get along well with others.
I ran cnc. devlieg jig mill

I used my. 0005 and. To get me close then I brought out my. 00005 for fin.
We made can making machines and closure machines. Also gear boxes (very large ones)

1987-1995
Accura tool and mold
Crystal lake, Il
Made mold bases cores and cavities
And held. 0001 on bores and. 0005 on locations.
Wotan boring mills
Ceruti
Cnc matsurra 5 axis boring mill with mit.3000 controls I programmed my self
Huraki 5 axis boring mills
Cnc g&l boring mill 5 "
Head of boring mill department
Mazak h800
12.00-19.00

Accura was bought out.

1995-2000

Atols tool and mold
17.00-19.00
Cnc g&l 5"-6" 800 controls and 8000 like fanuc

Very large dies and mold boring mill dept head
Night shift
Was bought out

2000-2003
Akuma vert. Programmed except for contouring then the programmers did that
23.00-26.00
Mold bases, cores and cavitys very high tech ones for the medical field very close work

April 2003-march 2005
E.M.F. inc.
Merritt island, fl
Dave Clark is the owner
Job shop for the kennedy space center
Wotan
Cnc Malo 9 axis this is not a misprint
18.00-18.50 the reason I left was no air-cond. The owner said he would do it but he did not.

Columbus McCinnon corp.
Sarasota, fl
18.00-20.00
Lucas 4 "
We do a series of tire shredder

Available Upon Request
References

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 2001 to 2050 of 15512)

Go to Search Parameters...

Brief Description

Senior structural engineer with 15 years experience. National Diploma (Civil Engineering)Bachelor of Technology (Structural)

Over 14 years work experience in various fields i.e. IT/MIS/Help Desk, Storekeeping, Banking and Finance, Clerical and Production

Finance Manager, Qualified Accountant

Auto Electrical / Mechanical/ heavy vehicles, Cat, Deutz, Comatsu, Man, M/Benz, Feul rail engines, Airconditioning, Hydraulics, Electrical repair on all types of vehicles, Mining vehicles.

20 years Experience in the Acquisition of Oil and Gas Leases, Title Examination, Title Curative and Management of Small, Medium or Large Scale Projects within the Rocky Mountain Region

Level 2 UT EN473, RSO, Previous Level III PT,MT,RT. Advanced inspection in Phased Array and TOFD - Good computer skills

i am the man for your work ,i have run all different kinds of boring mills

I am seeking a long term employment contract within a company as Rigger.

Experienced Coal Geologist and Oil & Gas Development Geologist, results-oriented, very strong mappiing, modelling, drilling program design and oversight.

civil/structural engineer/manager

Petroleum geologist, and specialized in a diversified spectrum of upstream petroleum activities. He also has a long and excellent employment record in both petroleum business and management.

Master Mariner with experience of LPG/C and LNG/C

B.Sc.1977, V.G. Honours, M.Sc.1985. Consultant and Executive Director (> 40 Transport & Railway projects). Teach Transport Planning, Railway Eng. & Applied Statistics & Eng. Systems for undergraduate, Faculty of Eng., Cairo Uni. DOS, Win., AutoCad, MSOffice. Organizing the 3rd CODATU-III Conference

B.Sc. in Geology, M. Sc. Geophysics Working as Co-coordinator & D. Geophysical Manager

Petroleum/Oil/Gas - Economics and Technical Management - Chem Eng - 30 yrs exp.

19 years Project/Turnaround Planning, 2 years in EP Maintenance Planning experience in O&G offshore & onshore; at senior capacity. Well versed in Planning software e.g. MS Project, Artemis & working knowledge of Primevera. Excellent in MS Office tools & MS Access.

I have worked in the Oilfield for over 16 years. Where by I have gained valuable experience in all down hole tool applications as quoted below. I have managed bases in different countries, and trained people from all walks of life. I enjoy my profession.

Chemical Engineer with Professional skills in Sea Water Desalination, Drink Water Production, Waste Water Treatment, Steam Production, Nitrogen Gas Production, Sulphuric Acid Production, Electrolysis – NaOH, Cl2, HCl Production

Skill gained over eighteen (18) years of experience on all aspects of Rotating Machinery and static equipment for onshore and offshore applications including specification and selection, contract technical evaluation, execution of modification and minor changes, design approval, witness testing, ins

I am a chemical Engineer having Post Graduate in Environmental Engg.with safety background with 20 years experience. Past 13 years I have been involved in the implementation of environmental legislations. I involved in contaminated site assessment and bioremediation of contaminated site.

APPLIACATION FOR THE POST OF JUNIOR CIVIL ENGINEER.

Treasury professional with 20 years experience working for three Fortune 500 companies.

My training has been as a Financial and Systems Analyst/Manager with significant international/domestic Controllership and Treasury experience,

I am a creative civil engineer and construction inspector, with diverse multi disciplinary experience in reinforced concrete, pre-stressed concrete, precast concrete, structural steel and timber construction. I am well versed with all aspects of project management from inception to completion.

Project Manager: Responsible of the coordination and execution of the following projects: • Warehouse Management System (Oracle WMS) • Overall Revision to the actual ACP Master Catalog . Inventory Re-engineering Program

I am GIS specialist and has applied GIS in agriculture, mineral exploration and education. I am proficient in spatial analysis, database design and implementation including, technical writing for PC's and GIS, GIS training, GIS helpdesk, GIS implementation, and working as a GIS consultant.

Position leading to a career in Environmental Management/Planning with an International Oil Company or a recognized International Consulting Firm.

Welding(certificates). Electrical, mechanical, hydraulic and pneumatic equipment, installation, (30MPa certificate). Workplace Safety & Health field (Certificates). Staff training and retraining. Drawing and reading blueprints and schematics. Robotics. Repair. Maintenance. Management. Sales.

30 years of professional experience. Having experience in seismic data acquisition and processing including velocity analysis, de-convolution,wavelet processing, migration velocity smoothing, VSP, Well logs, strong knowledge in computers and Seismic Unix processing. M. Sc (Exploration Geophysics).

SUMMARY Exploration and appraisal geosciences professional with extensive background in domestic and international prospect evaluation and reservoir characterization. An accomplished, resourceful, and versatile oil finder with strong communication and interpersonal skills.

A specialist in rock mechanics and engineering geology. 26 years tunnelling and mining experience. Expertise in stability analysis, support design and monitoring; blast design and optimisation; TBM and road header performance; risk analysis.

20 years experience in mine planning and mine operations in several countries including Australia, India, Japan, Jordan, Indonesia, South America and North America.

Twenty years of mining experience gained from working in industry and from consulting. Thirteen years of direct operational experience that has encompassed underground mining as well as surface alluvial and marine diamond mining operations.

A western educated finance professional with 23 years of accounting, strategic cost analysis, corporate finance, listing, valuations, banking, project finance and execution, supply chain, restructuring, turnaround, strategy, business development and board experience with world class multinationals.

More than 20 years as a Petroleum/Reservoir Engineer in Exploration and Production Company with heavy emphasis on reservoir management: India (Oil and Natural Gas Corporation Ltd.), Kuwait (Kuwait Oil Company), Abu Dhabi (Zakum Development Company) and Oman (PDO-Shell).

An Oil and Gas Professional with expertise in International Operations Management, Assessment of Technical Data, and Long-term Business/Budget Planning. Managed international operations, PSC and construction contract negotiations, liaise with foreign governments and, field exploration/development.

25 YEARS OF MANAGING & BUILDING A/E PROJECTS EXCEEDING $ 600 MILLION BS & MS - CONSTRUCTION MANAGEMENT - MINOR IN CIVIL ENGINEERING - 4:00GPA FORMAL EDUCATION IN ARCHITECTURE -QUALIFIED WITH A.R.E IN THREE STATES

Seeking a position as an executive with responsibilities for better performance, skills improvement and emphasis on environment for teamwork for company as well as personnel growth.

HAVING 23+ YEARS OF SERVICE ,INCLUDES 20YEARS IN INDIAN AIR FORCE AND PRESENTLY ENGAGED WITH PRIMUSTELECOMMUNICATION INDIA LTD

Business Analyst Technical Writer Project Manager Programme Director

Take advantage of 30 years corporate experience. I can train your junior staff to become very proficient with Paradigm's GEOLOG 6 software. My specialty is reservoir characterization, with emphasis on probabilistic log interpretation using GEOLOG's Multimin program. Worldwide contracts considered.

Electrical, Control Systems and Instrumentation Engineer: great international experience designing, installing, testing, calibrating, starting up, commissioning, maintaining and repairing industrial electrical, instrumentation and control systems, in the natural gas and others industries.

Senior Engineer with Masters in Business Administration and possessing over twenty-two years of experience in Electrical/Instrument Maintenance and Project works in refining and petrochemical industries.

QHSE Manager, EOD/UXO consultant, height safety specialist, International experience and dedicated professional.

SAS and COBOL Programmer with DB2 and SQL experience

OBJECTIVE Seeking a challenging position at senior management level in R&D and Manufacturing / Technical Services / Applications Development / Technology Strategy Planning./Project Implementation

Seeking a Senior management position in operations, design-build, EPCM, contract management, and business development in either the domestic or international industry.

A dynamic and enthusiastic Chartered Mining Engineer with MBA and extensive International Business Management and Change Management experience. Committed to continual improvement in people, safety, quality, efficiency and profitability.

25 years of experience in the environmental aspects of power plants and the oil and gas industry. Work experience in Southeast Asia, Middle East, West Africa, East Africa, Central America, South America, North America, Eastern Europe, UK, USA, Former Soviet Union

Offering MBA Leadership, insightful, analytical, and creative engineering leader successful in conceptualizing and implementing cost-effective solutions and leveraging key advantages in complex environments. Resourceful team builder and project manager adept at building and leading teams.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 [ 41 ] 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Goto Advanced Search...
Keywords: (e.g. mining engineer)		Find results with:

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out