Misco Jobs  |  Go to Job Seeker's Center »»   |  
 
«« previous resume Resume #77510 next resume »»
CONTACT INFORMATION:
View contact information...

Current career Details

RPS Energy (Formerly Hydrosearch) July 2006 to Present
350 Glenborough, Suite 200 Houston, TX 77067
Dietrich Landis 281-877-9400
- Performed both Lead MMO and MMO duties to maintain environmental compliance during seismic operations in the Gulf of Mexico
- Submitted bi-monthly reports on mitigation measures to the Minerals Management Service (MMS)
- Observed and recorded information about the ramp up of airguns and the effect on marine mammals located within (500m) to ensure compliance with NTL No. 2007-G02 guidelines
- 70-90 hours per week/ $210 per day

Year Client Location Contractor/Vessel Project
2008 CGGVeritas GOM Veritas Viking I 3D Seismic Survey – Wide Azimuth
Lead Observer
Western Geco GOM WesternGeco 3D Seismic Survey – Wide Azimuth
Toisa Crest Lead Observer
CGGVeritas GOM CGG Laurentian 3D Seismic Survey – Wide Azimuth
2007 British GOM Veritas Osprey 3D Seismic Survey – Wide Azimuth
Petroleum Lead Observer
Western Geco GOM Western Neptune 3D Seismic Survey
2006 British GOM Veritas Vantage 4D Seismic Survey
Petroleum

Previous Career Details

Fugro-GEOS August 2007 to November 2007
6100 HILLCROFT, HOUSTON, TX 77274
JORDAN PAYNE 713-346-3600
- Shipboard operation and shore-side maintenance of Acoustic Doppler Current Profilers (ADCP)
- Deployment and recovery of oceanographic equipment, use of power and hand tools and maintenance of equipment
- Demobilization of vessels
- Working closely with client representatives, Captain and crew of the vessels to provide timely, accurate oceanographic data and support
- 84 hour per week/ $18.00 hour

Year Client Location Contractor/ Vessel Project
2007 British Petroleum GOM Jonathan Chouest Current Monitoring using ADCP
British Petroleum GOM Commander Tide Current Monitoring using ADCP

Saltwater inc June 2005 to April 2006
733 N St, Anchorage, AK 99501
Diana Starr 907-276-3241
- Reported regulatory compliance relating to the Magnuson-Stevens Fisheries Conservation Act, the Marine Mammal Protection Act, the International Pacific Halibut Treaty, the Migratory Birds Treaty, and the Endangered Species Act.
- Completed a three-week certification course with an at-sea safety evaluation which meets the standards of the National Marine Fisheries Service and the United States Coast Guard.
- Working conditions consisted of 1 to 45 days at sea, sampling on open decks (cold and wet weather conditions), rarely sleep for 8 hours uninterrupted, lifting up to 90lbs multiple times a day, and reporting to National Marine Fisheries Service (NMFS) daily. 
- Responsibilities included sampling for species composition; identification and collection of fish, scallops, crabs, marine mammals and seabirds; collection of biological samples; monitoring for marine mammal and protected bird interactions; documentation and reporting of daily fishing activity to the National Marine Fisheries Service.
- 70-90 hours per week/ $133 per day

Year Location Vessel Type of Vessel
2006 Bering Sea American #1 Fishing vessel – Trawl 160ft
2005 Gulf of Alaska Ruff and Reddy Fishing vessel – Pot boat 86ft
Gulf of Alaska Hickory Wind Fishing vessel – Trawl 74ft
Gulf of Alaska Miss Sarah Fishing vessel – Trawl 100ft
Gulf of Alaska Irene H Fishing vessel – Pot boat 96ft
Bering Sea Alaska Warrior Fishing vessel – Trawl 250ft

University of Texas Medical Branch, Dr. Chopra's Lab May 2004 to May 2005
301 University Boulevard, Galveston, TX 77555
Dr Vimlarani Chopra vchopra@utmb.edu
- General maintanence, ordering, and inventory of research lab
- Extraction of cRNA from cell lines HELA, SKOV3 and OVCAR converted into cDNA with the use of Reverse Transcriptase - Polymerase Chain Reaction (RT-PCR) then visualized through Gel Electrophoresis, Polyacrylamide/Agarose.
- Determination of survival rate of Ovarian and Cervical cancer cell lines SKOV3, HELA, and OVCAR was evaluated using the MTT test.
- Evaluate the viability and survivability of SKOV3, HELA, and OVCAR through the technique of Live/Dead Staining.
- Identifying vascular endothelial growth factor (VEGF) and basic fibroblast growth factor (bFGF) via Western blot analysis in which these proteins were separated by electrophoresis, transferred to nitrocellulose, and reacted with antibody.
- Appling Reference Manager to organize and utilize bibliographic references.
- 40 hours per week/ $32,000 per year

Volunteer work

Habitat for Horses November 2004 to April 2005
Hitchcock, TX 77563
Rebecca Williams 409-935-0277
- Dispensation of medical and dental care, grooming, diet and general maintance of horses.
- Dealt with Ranchers, farm hands, and sizeable farm equipment.
- 10 hours per week/ Volunteer.

University of Texas Medical Branch, Dr. McBride's Lab September 2003 to April 2004
301 University Boulevard, Galveston, TX 77555
Dr. Kuyler Doyle 409-747-2498
- Identification and localization of specific regions of protein molecules that are recognized by the immune system by the process of Epitope Mapping
- Amplification of DNA through the practice of Polymerase Chain Reaction (PCR)
- 25 hours a week/ Volunteer

Other information

Education
1. Iver C. Ramum, High School Degree. 1999
2. Texas A & M at Galveston, Bachelor of Science, Marine Biology. 2003

Specialty Courses
1. License to go Offshore, BP 6 in 1. British Petroleum. 2007
2. Offshore/TRAP/SafeGulf SafeLand, Fugro-GEOS. 2007
3. Water Survival/ Helicopter Underwater Egress Training (HUET), Acadiana Safety. 2006
4. MMS Marine Mammal Certification. Geocet 2006.
5. Cold Water Survival, National Marine Fisheries Service. 2006
6. Open Water Scuba Certification, PADI. 2002

Reference
Will be provided

View contact information...
«« previous resume next resume »»
Search Results (Resumes 14751 to 14800 of 15373)Go to Search Parameters...
Brief Description
Having good leadership qualities, I can effectively lead and motivate a team. Possesses good inter-personal skill. I value success, which gives me the motivation and drive necessary to achieve personal and company goals. Experience in safety and 5S system implementation
Heavy Equipment operator
diploma in mechanical engineering
B-Tech (Mechanical Engineering) .Presently working as Scientific Officer in Nuclear Power Corporation of India Limited (Department of Atomic Energy).having experiece in 1.Power production, planning and control of process carried out in the plant. and 2 commissioning of systems
Strong knowledge in electronics industries PCB design, assembling, trouble shooting
Finance*Strategy*Management*Sales*Contracts*Financial Services*International/Global Trade
Experienced excavator operator on most models of machine up to 80 tonnes. Expierinced in both Civils and Demolition. I am willing to work over seas if needed.
Professional mechanical/industrial engineer seeking a project engineering managmenet or consulting position. Offer extensive engineering and management skills in the industry.
Geologist with background experience in Mining and Exploration of mineral resources- gold and base metals. QAQC for sampling projects. Ability to prepare technical Exploration reports for Project Managers incl drilling proposals.MapInfo, Micro-Mine, Vulcan, MP3, MS-packages.Ore reserve calculation
I am a graduate mechanical engineer with close to 16 years experience in the engineering, maintenance, and project engineering fields; large power stations and also in the oil & gas field. Extensive Maximo computorised maintenance management system (CMMS) experience and worked on SAP for 3 years.
Master of Science in Mechanical Engineering Zone and Energy Manager, Facilities Maintenance Manager
Seven years experienced within the Oil & Gas Industry with Multinational Companies engaged in the EPC of Refineries, Petrochemical and Chemical Process Plants, Gas Plants, Well - Heads, Shutdown piping, Cross-Country and Mountain Pipeline projects, in the specific areas of Commissioning Certificati
CHEMICAL PLANT OPERATION
Project Management / Lean Training / PFMEA (Process failure modes and effects analysis) / PCP (Process Control Plan) / PFD (Process Flow Diagrams) / Lean Manufacturing / 5S / Value Stream Mapping / Visual Management
HVAC, Maintance
I have been working as a Computer Technician for the past two (2) years. I received eight (8) CXC subjects and BSc. in Electronics and Communications from the University of Technology. I also have two (2) years engineering related experience working with TCom/Huawei Technologies/CLARO.
Multi-skilled operator, decision making
Logistics, shipping and Offshore Assistant
I have 12 years experience in the South African Police ( VIP Protection , Access Control , Cime Prevention , Investigatins ) , 3 Years experience in The Private Security Industry ( Regional Manager ) and 1 year experience in conflict zones ( Baghdad , raq as a Mentor / Advisor )
Specialized in International Human Resources, I am currently in Dubai responsible for personnel management in a multicultural environment. In France, I also actively participated in Rio Tinto Alcan to the setting up of a European HRIS.
I work offshore in the Gulf of Mexico contracted by oil and gas companies to monitor compliance and compile monthly reports. I work 12 or more hours per day 7 days a week and am used to physically challenging work.
I started my career in 1991. I am a qualified fitter & turner (trade) Currently working as a workshop foreman. Did courses in inspection (QC) and management.
londery worker ,waiter & data feeding
Hard working and Dependable Environmental Professional
Pro Engineer 2+ years experience
Canadian Medic
I have an ability to grasp new concepts quickly and clearly to apply my knowledge and experience for tackling tricky situations.
Iinterested and would like to have an opportunity to work with your company, as Account Executive. I believe there would be a good fit between my skills and interests and your needs.
Visual C++, C#, Visual Basic, Java, J#, Pascal, PROLOG Tools:1.Professional: Microsoft Visual Studio.Net, C builder, Java Visual Age, SQL Server 2000 2.User level: Microsoft Office, Visual Studio, Web Studio, Oracle 9i, Scripting and markup languages: HTML, XML, XSL, VBScript
Senior administrative skills, leadership, international recruitment, training, generalist HR, education, liaison,
During my studies I worked in cooperation with the Egyptain Geological Survey in the Eastern and Western Desert of Egypt and in another project together with the University of El Jadida, Morocco. Main subjects were mapping and sampling as well as geomagnetic. Working experience is shown in my CV.
I WAS DONE B=TECH IN MECHANICAL ENGG WITH 72% MARKS & ALSO DONE DIPLOMA IN MECHANICA;L ENGG & I HAVE ALSO THREE YEAR WORK EXPERIENCE
I have been involved in developement and implementation of various safety programs and helping create safety cultures within organizations on and off the job. My most recent assignments have been in UAE and Mexico as a HSE Manager and I would like to continue in this role.
I am Proficient in Process Modeling/Simulation and Oil & Gas Production Optimization using Nadal Analysis (SAM, PERFORM, PROSPER). I have experience in Oil Analysis, NDT corrosion inspection, and equipment condition monitoring.
Experienced Automation/Process Control Engineer
Tender Administrator
Master Mariner and have experience as Senior Officer on LPG Carriers
DRILLING FLUID ENGINEERING ( MUD ANALYSIS), SURVIVAL AT SEA AND HELICOPTER UNDERWATER ESCAPE TRAINING, M S SUITE
1 year Wellsite Geologist/Mudlogger; 7 months experienced Varian Gas Chromatography; 2.5 years experienced Staff & Project Hydrogeologist and Environmental Field Technician
FRAMME (Intergraph), Microstation (Bentley Systems), Projectwise, C++, Microsoft Office, HTML, Matlab, AUTOCAD,
Auto CAD Operator & 1 Year Working Experience in Auto Plant (specialized software of piping)
! have 23 years in the oil and gas industry with the last 10 in the pipeline control room. Handling 10000 miles of pipeline reciepts and deliveries.
10+ Years Experience PLC Programming PC Board Testing/Repair Test Point Systems
B.Tech Engineer having 2+ years of experience presently working as a planning engineer with Reliance ,Jamnagar for JERP project. Can handle softwares required for job accomplishment.
Geotechnical, Geological Exploration, Resevoir geologist
* MBA in Asset Management and Graduation in IT. * Proven ability to manage complex projects. * Building motivated teams to accomplish capital projects.
Proficient in Microsoft Office Programs; Familiar with OSHA and NFPA federal standzards; Technical Skills; Research Skills
I am interested in employment for any position where I may acquire new skills or my current skills may be fully utilized. I have experience in Crush and Convey, Leaching, Haulage, Safety and Environmental areas. Upon my employment I will bring a safe and positive work ethic to your company.
QAQC Inspector. I have Experience on both LNG Termals and Oil Refineries
I am confident that my training and experience in the area of safety and health as well as international teaching and program development skills would benefit a company that is seeking to excel in this area.
First   Prev   251   252   253   254   255   256   257   258   259   260   261   262   263   264   265   266   267   268   269   270   271   272   273   274   275   276   277   278   279   280   281   282   283   284   285   286   287   288   289   290   291   292   293   294   295   [ 296 ]   297   298   299   300   Next   Last
Seach Parameters

Goto Advanced Search...
Keywords: (e.g. mining engineer)Find results with:
Frequently Asked Questions
What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...
Employer's Center


» Employers Home
» Feedback
» Help

» Post Jobs
» Edit/Delete Jobs
» Search Resumes
» Resumes By Email

» My Account
» Log In

» Log Out
 
©1999-2009 Misco Jobs. All rights reserved.  Contact: support@miscojobs.com