Resume - Environmenatl Skills: Water reuse planning, ArcGIS, Energy, Wastewater Treatment...

Misco Jobs

Resume #77549

CONTACT INFORMATION:
View contact information...

SUMMARY
. Dynamic, conscientious and detail-driven individual with capabilities in completing tasks with competing deadlines. Strong team member, open-minded with other ideas and motivate others to achieve optimal result. Clear communicator, both oral and written. Effective interpersonal skill and adaptive to unpredictable and hectic environment.

AREAS OF EXPERTISE

* Water Reuse Planning
* Life Cycle Analysis
* Wastewater Treatment
* Engineering Calculation
* Statistic Analysis
* Risk Assessment

EXPERIENCE

Illinois Institute of Technology, Department of Civil, Architecture and Environmental Engineering, Chicago IL
Research Assistant, Chicago to Build On Wastewater Reuse Research, 2007 - Present
Sponsored by EPA-Collaborative Science and Technology Network for Sustainability and Chicago Metropolitan Agency for Planning
* Developed multi-objective model for urban water reuse
* Identified potential users by GIS in western Chicago Area, seeking the optimal route from Waste Water Treatment Plant to potential users
* Evaluated economic feasibility of water reuse in City of Aurora by estimating wastewater reuse cost through different related factors
* Compared water resource (groundwater and surface water) quality with treated wastewater

Illinois Institute of Technology, Department of Civil, Architecture and Environmental Engineering, Chicago IL
Teaching Assistant, 2008
* Assisted in teaching course principles to students in Chemodynamic and Biotech Process in Wastewater Treatment courses
* Organized course work materials and graded assignments

Sun Yat-Sen University, Guangzhou China
Research Assistant, 2004 - 2005
Detecting total phosphate in the sediment along Zhujiang River (Pearl River) in China
* Sampled sediments along Zhujiang River with an extent of 1000 km, and oriented sample points with GPRS
* Conducted experiments on testing Total Phosphate in the sediment
* Evaluated Total Phosphate distribution trend in Zhujiang River and, estimated the eutrophication condition in this second largest flowrate watershed in China

ENSR, Guangzhou, China
Environmental Engineer Intern, 2005
* Prepared basic engineering calculations and reports for customers
* Conducted Environmental standards research on Environmental, Health and Safety aspect
COURSE PROJECTS
BioWin
* Calibrated and validated models using real data
* Simulated water treatment outputs by using different kinetic parameters
* Incorporated anaerobic model to explain volatile fatty acids
SWMM
* Calibrated one rain event data by adjusting characteristic width and impervious area
* Tested and run the model against 2006 runoff data
Economic Input-Output Life Cycle Assessment
* Identified industry segments with the greatest economic activity in 2002
* Analyzed what industries which present the greatest environmental risks by conventional air pollutant, energy, greenhouse gas and toxic release
EDUCATION

Illinois Institute of Technology, Chicago IL
M.S., Environmental Engineering, Expected Dec 2008, GPA 3.625/4.0
Thesis: Water Reuse Feasibility in Northeastern Illinois
Sun Yat-Sen University, Guangzhou China
B.S., Environmental Science 2005
SKILLS

Software: ArcGIS 9.2, EPA SWMM 5.0, BioWin, AeroMod, Visual Basic, AutoCAD
Applications: Microsoft Office (Word, Excel, PowerPoint, Access)
Languages: English, Mandarin, Cantonese

AFFILIATIONS AND ACTIVITIES
* Presented Illinois Water Conference, 2008
* Presented WEFTEC Conference, 2008
* Secretary, Water Environmental Federation, IIT Student Chapter, 2008
* Attended IWA YP Conference, 2008
* Member, International Water Association, 2008
* Water Tower Tour, ISAWWA, Chicago, 2008
* Volunteer, Illinois Institute of Technology, Chicago IL IPRO Program: Focus on Sustainability,2008
* Stickney Plant Tour, MWRGD, Chicago, 2007
* Member, American Society of Civil Engineer, 2006

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 6201 to 6250 of 15508)

Go to Search Parameters...

Brief Description

GRAUDATE.AND DIPLOMA HOLDER IN INDUSTRIAL SAFETY MANAGEMENT AND ALSO HAVE 6 YEARS 4 MONTHS EXPERIENCE.

NDT level II, piping fabrication and errection, welding inspection etc.

9 years experience in production operator (oil and gas field) at present i am working in sudan

Analytical chemistry lab-skills for testing materials in quantitative and qualitative purpose with conventional or instrumentation techniques (UV-VIS, Atomic Absorbance and Infra Red Spectrophotometry, High Performance Liquid Chromatography, Gas Chromatography, Flamephotometry.

20 years of HR experience in recruitment, remuneration, pay structure development, performance management, job evaluation, benefits, organizational design, employee relations, database management, leadership, management, facilitation, coordination

I have over 36 years in the Oil & Gas Industry. International experience on land & offshore. Experience in remote location logistics. Have worked in desert, mountains, & jungle. Have drilled HTHP wells with oil base mud. Experience drilling horizontal & underbalanced. Spanish Speaking.

Bachelor in Engineering - Metallurgical Engineering.

Preparation of Techno-Commercial Proposal for various LSTK Projects like, Refineries, Petro-Chemical Companies, Steel Plants, Power Plants, Oil Bulk Plants, Gas Plants, Substations, Cable Laying, Plant Utilities and Various Industrial Projects.

Diploma in Chemical Engineering

BE in Mechanical Engr

Design Engineer-Static Equipments with 4 years Experience

Ensuring good quality control of mud system by analysis of drilling Mud additives

Have 10 years in cementing, tools and drill stem testing

Developing logic’s with RSLogix 5, 500, 5000 For AB Controllers, Simatic Manager for Siemens and Unity Pro for Schneider.

MIET Polytechnic, Trichy, India Diploma in Mechanical Engineering, St.Joseph's Higher Secondary School, Trichy. Engineering Group

FEED, DFR, RFP, Detailed Engineering

GULF EXPERIENCE

Mechanical Engineer with 4 years experience

Instruemnt engineer( PLC ,DCS ,ESD,field instruments )

My name is Adenowo Tosin Akeem, i hold a Bachelor of Science (B.Sc) degree in Earth Sciences(geology). Am interested in your reputable firm which i believe would need my experience. The following is a brief on my experience;

I got experienced as Mine Engiineer, Cost Control and Mine Planning

CA State Certified General Electrician(Journeyman) with some Instrumentation training in Process Controls

A highly motivated and experienced Construction and Structural Supervisor , with experience in oil and gas industry. An awareness and commitment to HSE implementation. Valuable team member, able to work on oBrief Description:* (Plwn initiative, with excellent man management and communication skills.

Experienced in Planning & Scheduling, Good knowlege of Primavera and MS-Project Software Operations, etc. HND in Mechanical Engineering

4 years working as storekeeper in Gulf countries. I am now currently employed in Butec- Qatar as storekeeper. I handled 5 sites in the project. I usually maintain and monitor of stocks, making receiving and purchase request in the system and issuing materials.

I have done post graduation in Geophysics with 1st class/A Grade. i have a year of seismic servicing industry experience working as an Assistant Geophysicist in one of the leading geophysical companies in Pakistan furthermore i have done 4 weeks internship in Prospect Generation Department of OGDCL

API 570/653 With excellent database skills

Drilling Fluids Engineer, Power Plant Engineer

Welder needs work

I am having more than 3 years experience in the field of construction ,troubleshooting and commissioning in istrumentation field.

Maintain unit and running reair

A hard worker who can create mechnical design. Knowledgeable 3D design such as Autodesk Inventor and Solidworks and can give from the scartch design. Have designed various of automated machine such as test handles, coveyors, laser handlers, jigs and fixtures.

F.S.C+Diploma in Refrageration And Air Conditioning 3years+autocad course

Mechanical engineer, autocad, offpipe, microsoft

Specialized in Corrosion & Materials Technology, Failure analysis, Quality control and Project Management

Electronics Engineer with 7.75 years of exp. in installation, testing, commissioning and troubleshooting of Satellite communication equipments and Vessel Traffic Management Systems which includes Radar Systems, AIS, VHF Systems, Hyd/ Met. Stations, etc

As A Production Optr Carried Out: DCS [Yokogawa 1000 & CS300, Emerson] Oil Production & Processing, Gas Processing (De-Hydration, Sweetning etc), H.P & Waste Gas Compressors, Wellhead Operations [Well Testing, HY Panel Operations, SCSSSV Function Test, Well Activation] Completion, Workover, W/L

Flow Assurance Engineer

Surface Mining Operator and Foreman

I am Graduated in M.Eng in Petroleum Reservoir Engineering from University of Calgary - Canada in 2006. I have more than two years of experiences in Research Institute of Petroleum Industry (RIPI), National Iranian Oil Company in reservoir simulation projects.

OBJECTIVE: Seeking full time employment with some reputed company in order to be able to play a major role in its activities and enhance my skills alike.

4 1/2 years oil & gas engineering experience (of which 3 years upstream) in conceptual, front end and detailed design.• Bachelor of Mechanical engineering, 2000-2004, from Visvesvaraya Technological University Karnataka, India with First Class.• Post Graduate Diploma in Petrochemical & Refining,

Registered Professional Engineer Experienced in Project Management and Construction

i am certificate hlder majoring in land surveying seeking for vacancies. Experience in building construction and infrastructure work for 11 years. Very famliar with all kind of surveying instrument Total Station. I have knowledge in AutoCAD Land Development Desktop.

Environmenatl Skills: Water reuse planning, ArcGIS, Energy, Wastewater Treatment, Remediation, BioWin, Modeling, Stormwater, Groundwater modeling

Procees Engineer With 5 Year of Exprience

Senior underground narrow vein gold geologist with experience in exploration, resource definition and geophysics.

Diploma Instrumentation, B. Tech Electronics(Appeared) , Skill in Automation Technologhy. Experties in Simens System, step7 , PCS7

5 years cad customisation autolisp, visual lisp, vb.net, structural design software development, connection design

Handle all Process oil and gas

First Prev 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 [ 125 ] 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 Next Last

Seach Parameters


Goto Advanced Search...
Keywords: (e.g. mining engineer)		Find results with:

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out