Resume - Metallurgist with more than 15 years of experience.

Misco Jobs

Resume #77557

CONTACT INFORMATION:
View contact information...

OBJECTIVE

To obtain a challenging managerial position in quality/process control/metallurgy which can add value to my work experience.

PROFILE

- Bachelors and Masters Degree in Metallurgical Engineering from reputed institutions.
- Over 15 years work experience in steel industry quality and process control operations.
- Initiated and implemented ISO 9002 Quality Systems.
- Team Leader for product development and quality improvements in Hadeed (SABIC), Saudi Arabia for cold rolled and coated steel products.
- Worked in India, USA and Saudi Arabia.
- Proven record of reducing process rejections.
- Strong working knowledge with MS Office, Powerpoint.
- Strong knowledge of steel specifications and testing.
- Professional Membership with International Technical
Associations.
- Highly motivated and good interpersonal skills.

WORK EXPERIENCE

Senior Staff Engineer (Metallurgy & Quality Assurance), December 1998 – present. (8 years 6 months)
Saudi Iron & Steel Company (SABIC), Al Jubail, Saudi Arabia

The company produces 3 million tons of Long Steel product and 2 million Tons of Flat Steel product. My role covers initiation and development of new grades and specifications based on market requirement for Flat Steel Products. My position entails close interaction and communication with Sales and Marketing, Planning and Process groups on a routine basis. Primary responsibility to initiate new products development based on market survey and enquiries, develop schedules and budget for product development activities and implement till customer satisfaction is achieved.

Other achievements include:

-Played an important role in the commissioning of Cold Rolling Mill Complex at Hadeed.
-Conducted numerous trials for the development of new grades of steel.
-Responsible for product development and metallurgical services in flat rolled product section.
-Established procedures and work instructions for ISO 9002 certification.
-Investigated customer complaints and implemented corrective actions.
-Responsible for answering order enquiries to Sales for cold rolled products.
-Managed a test house and metallurgical laboratory.
-Investigated failure of rolls in cold rolling mill.
-Team Leader for several Quality Improvement projects.
Some of the projects include:
Reduction of internal rejections due to sliver defect in cold rolled coils.
Design modification of cold slitting line to eliminate coil set defect.
Established process parameters for the production of deep drawing quality steels.
Optimized process parameters for annealing of cold rolled steels for improving cost effectiveness.
Development of Extra Deep Drawing Quality steels.
Development of Corrosion resistant structural steels.
Development of Pipeline Steels as per API and Shell specifications.
Demonstrated use of statistical process control techniques in processing.

Senior Manager (Quality Assurance), March 1987 - November 1998.
Lloyds Metals & Engineers Ltd., Bombay (India)

Managed Quality Assurance and Control activities and metallurgical laboratory of cold mill complex. The unit produced 50000 Tons of Cold Rolled coils per year.
Achievements include:
- Established and implemented procedures/systems for obtaining
ISO 9002 Certification for production of Cold Rolled Sheets.
- Management Representative for implementation of ISO 9002 systems.
- Reduced process rejections and improved profitability.
- Interacted closely with marketing section to establish new products.
- Managed a fully equipped test laboratory.
- Monitored raw material and product quality, developed test techniques and inspection standards to suit customer requirements.
- Published technical papers in Journal of Indian Institute of Metals.

Graduate Research Fellow, University of Nevada-Reno, Nevada, U.S.A
Jan.1985-Dec. 1986
Completed a Masters degree program in Metallurgical Engineering
Completed a project entitled ' Insitu Production of Aluminium Lithium alloys from Lithium oxide in fluoride melts'.

Quality Control Engineer, June 1982 to Nov. 1984
Mukand Iron & Steel Works Ltd., Bombay (Steel Plant Division).
- Handled process control activities of Section Hot Rolling mill.
- Supervised heat treatment operations of Bars & Wire Rods.
- Significantly reduced process rejections and improved profitability.
- Completed projects in product development.
- Handled metallurgical testing - destructive and non destructive.
- Investigated customer complaints.

EDUCATION

Master of Science, (M.S.), May 1987.
University of Nevada-Reno, Nevada (U.S.A.)
Major: Metallurgical Engineering,

Bachelor of Technology (Hons.) May 1982
Indian Institute of Technology, Kharagpur (India)
Major: Metallurgical Engineering

NATIONALITY: INDIAN AGE: 46

PROFESSIONAL MEMBERSHIPS

American Society for Metals, Metals Park, Ohio, Jan.1989 - Present.
National Association for Corrosion Engineers, Houston, Texas, June 1988 - Dec.1993.
Member of Toastmasters International, an organization devoted to public speaking.

References will be furnished on request.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 951 to 1000 of 15507)

Go to Search Parameters...

Brief Description

Having more than 15 years of experience in the field of Installation,alignment and inspection of Rotating and static equipments in the field of Oil and Gas,Power ,Petrochemical projects.Can lead a team of engineers,foremans and work force involved in Installation,alignment and inspection of equipmen

Free! Welder

A hard-working and dependable Professional Quantity Surveyor with with the ability to work well both independently and in a team. My fifteen years experience in the construction industry has resulted in a well rounded confident and experienced Professional Quantity Surveyor.

19+ years of experience in Electrical Designer Field. Experience in Oil & Gas 3 Years and Power Plant Field More than 16 Years

PROFESSIONAL SKILLS : Sales Management; Sales Force Automation; Team Player and Leader; Project Management; Schedule Maintenance; Auto Cad; Caesar II ; Technical Writing; B31.3; Process Improvement; Strategic Planning; Microsoft Office

I am a petro;eum engineer, holding BsC in petroleum engineering in 1990 worked in drilling as drilling and workover company man and coordinator with Waha Oil Co. for more than 16 years., My experience in vertical and horizontal drilling, UBD, exploration and development , well completion,

16 years of experience as a water treatment chemist in Power Plant.

17+ years, FEED, Engineering, Fabrication, Construction, Commissioning. Brownfield dev./Cap. Ex. Oil/Gas/Petrochemical/LNG/Mining

Drilling Fluids Engineer 38 years worldwide experience both in Field and Management

Extensive Cost Control experience gained over the last 25 years in the Oil Industry mainly in Drilling

Master Mariner

i attended petroleum institute nigeria after my school certificate i had ond in petroleum refining technology and higher diploma in chemical technology i worked in nnpc refineries in porthacourt warri and kaduna i can also work in petrocheical and gas processing plants

Special Inspector CWI/ICC, Bolting, Fireproofing, B1 Inspector

Civil Structural designer with over 20 years of experience in civil, structural, industrial, petrochemical onshore and offshore projects, infrastructure, and government projects.

Capable of handling high-pressure situations at the same time maintaining standards of accuracy. Influencing people in a friendly but firm manner.

Experience in foxboro and bailey DCS panel operation . i am working as panel operator in a big oilfield control room since 1993, i am the most suitable candidate for this post

Construction and Maintenance Mechanical Manager / Superintendent / Supervisor

Civil structural engineer, 14 years experience, familiarity with structural codes and finite elments software.

Construction HSE proffessional residing in Canada. I am looking for over seas employment on a major Construction project. I am a board certified health and safety consultant and Safety officer as well as having over 15 yrs of construction expeirence as a journeyman tradesman.

Well Services, Well Interventions, Completions

I am a highly competent person, trained and experienced in all facets of construction, construction management and leadership.

PhD in Geophysics, excellant in computer ,

Detail engineering as Performer/Area Lead; Material estimation, Proposal & Man hour estimation; Bid review, Vendor/Sub-contractor document review; Development of standards, spread sheets; Coordination with work share office/Client; Field engineering Support at site

A seasoned Security Manager with 20+ years of experience in Government service and Oil and Gas industry 15 of which was in Shell Nigeria. Strong field experience in Security Operations, kidnap & ransome mgt, risk surveys and assessment, cost control, loss prevention and incident investigation.

Goal-oriented QHSE manager with 18 years experience in organizational and project QHSE Management, In-house project Management and Audit Management including 10 years background of Piping and Pipeline Engineering in various industries under E, EP, EPCM or EPCC contracts.

Metallurgist with more than 15 years of experience.

MASTER OF APPLIED SCIENCE IN MINERAL PROCESSING, 15YEARS EXPIRIENCE

Strong leadership and ability to work according by Company's Political and Procedures. Good understanding of Oil accounting Process. Supporting the branch Finance Manager on day-to-day compliance issues

I am a Chemistry graduate with 18 years of experience with NACE certificate as Corrosion Technologist

Preliminary 35 hours PDU trained PMP with MBA in Telecom Management plus Bachelor in Engineering (Electronics & Telecommunication), A well established professional in the information technology sector with 10 years of project Program, delivery management expertise combined with multiple tasking, and

Over seventeen years of experience in the Oil & Gas Construction

18 years Project Construction Management/ Project Execution / Project Management Consultancy experience in the Industries like Refineries, Petrochemical and Oil Gas (Cross Country Pipelines, Booster Pump Stations, Gas, Oil Station, Up-Stream flow Lines) including Mechanical / Piping, Civil, Electric

Senior Piping Engineer - Stress Analysis / Material / Layout (18 years experience)

General Management (1300 staff), Sales devt, finance - International experience - Oil & gas, Distribution, civil eng.

Status Qualifications and employment history Education Foreign Languages

Being graduated in chemistry,I gained 17 yrs of exp in areas of operation,R&D.Process(control,validation),QC,material characterization, by using chemical& instrumental methods in cement ,Ores ,minerals,Ceramics &Refrac,Metals indls ,wishing to work with a team where I can utilize my full knowledge

Working in Oman as a Instrument Engineer, I have 20 years exp in Instrumentaion and Analytical

Master mariner class 1 unltd, over 8 years command experince onboard large crude carriers. Over 40 spm mooring ops at various terminals including Lybia. Willing to gain expertise as mooring master in offshore oil industry.

I have high experience as production supervision at manufacture plants.

25 years experience in construction management of mining operations, highways, dams, site preparations, environmental, airports and petrol – chemical projects. Management assignments in 12 major projects.

Drilling Fluids Engineer, Experience with All types. Over 30 years in field. World wide experience, Presently working Ultra-Deepwater projects in GOM.

post Engineer Senior Inspector – Painting / Coating & Insulation BGas / NACE –CSI [I] certified Painting Inspector. Experienced Thermal / Cryogenic Insulation Inspector Ref – Contract / Direct Hire- on Day rate basis with rotational cycle. Oil & Gas, LNG projects. Client side representati

SENIOR PANEL OPERATOR POSITION FOR PRODUCT TANK / JETTY AREA.

Sr. Electrical Designer with 15 yrs experiance including PDMS

Experienced structural engineer (US and Australian experience)

Mechanical Enginner with more than 16 years of experience in the field of Construction, Maintenance of Petrochemical, Chemical and Power plant

15 year experience in international/ multicultural mid- and large scale oil & gas projects in polar areas of Russian Federation in both Contractor’s and Client’s role. Working to Russian and Western standards. Planning, risk management, cost control, certification for construction and commissioning.

Fourteen years of experience preparing land-use, environmental, and regulatory agency applications for mine sites. Ten years of experience leading interdisciplinary project teams and has successfully negotiated land-use, wetland, endangered species, air, storm water and reclamation permits.

My strengths lie im my ability to manage available resources and communicate with others

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 [ 20 ] 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Goto Advanced Search...
Keywords: (e.g. mining engineer)		Find results with:

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out