Resume - Mining, Construction and Survey Fields.

Misco Jobs

Resume #77584

CONTACT INFORMATION:
View contact information...

I have a wide range of experience in the mining, construction and surveying fields. I feel this combined experience makes me a good fit into your company. Please check out my resume, there are other positions I can fill. On the job site, I am usually the right hand man for the supervisor. I deliver instructions to employees and sub contractors, solve problems that slow the job down and fill in where we are shorthanded. I also watch for unsafe working conditions and practices. I usually take a lead position or eventually get put there, but I am a good follower as well. I like to work in a learning environment where I can learn new skills or be challenged with new tasks. I have limited experience in other fields of work such as geology, diamond core drilling, underground mining, drilling and blasting. I am eager to learn more, as a matter of fact, I have taken the following online courses to further my education:
1) Exploration and Geology 1: The Geologic Timeline.
2) Mining Health and Safety: 1) Ground Control. 2) Handling of Explosives for Underground Mining. 3) Preventing Rock Fall Injuries in Underground Mines.
3) A Rock Engineering Primer for Non-Engineers in Mining.
4) Introduction to Mining and Mineral Production.
5) Introduction to Modeling Project Finance.
6) Common Rocks and Minerals.
7) Cyanide in Mining.
8) Flotation 1: Fundamentals.
9) Aboriginal Awareness and Consulting.
10) Underground Mining Practice.
11) Mine Safety and Rescue: 1) Underground Gas Hazards. 2) Underground Fire Hazards. 3) Terrain, Cold and Other Hazards.
12) MSHA Underground and Surface Certification.

I can work anywhere that you need me. I specialize in extreme climate conditions and remote locations. Thank you for considering me for the position.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 7151 to 7200 of 15509)

Go to Search Parameters...

Brief Description

Have worked in the electrical industry for 10 years with the last 4 years running my own signs and lighting installation company. I am educated to ONC level in Electrical Engineering and have the IEE 16th Edition Wiring Regulations Certificate.

Petroleum Engineer

Diploma in Electrical Engineer having a 16 years exp. of maintenance dept. in fertilizers and petrochemical industrie

post applied for QA/QC Inspector piping and welding

To seek a full time job in an oil company that will provide a challenging career opportunity

I am an Engineering Planner with 10 years EPCM experience.

Mechanical Engineer from NED in Lubricants industry

Seeking career opportunity to apply commitment through dynamism, vision and positive mental attitude to any organization with a strong belief in principle of goal congruence.

I HAS AN EXPERIENCE ON CONSTRUCTION FOR MORE THAN 12 YEARS.

Having a total of 10 years of professional experience in Health, Safety and Environment in the field of Oil & Gas projects comprising of various disciplines (Design, Civil, Mechanical, Electrical and Instrumentation) in Kuwait and also involved in HSE management in the chemical process industry whic

Mining, Construction and Survey Fields.

Rotating equipment mechanic with 13 years experience is available for immediate interviews.

Greaduate civil engineer, 4 years experience as highway design engineer, proficient in working withMX Road, Autocad, MS Office, excellent communication skills, good leadership qualities, good team player, quick learner, dedicated and hard working

British citizen. BSc Resource and Applied Geology, MSc Mining Geology, Field Experience in UK, Spain, Namibia and Kyrgyzstan.

Experienced Mechanical Engineer

Static Equipment engineer with almost 4 yrears of work ex.

Quality Control CWB level II B31.3

construction laborer/ operator -10 years experience- very dependable

To procure an innovative job in the field of Engineering, where by my skills can be enhanced and utilized in a myriad procession.

Act as Loading Master during Pre-Loading Meeting

Metal scrap buyer, purchaser

• Field Instrumentation Eng,PLC ,DCS RS3 rosemount oil and gas 7years

Mining Engineer in Short Term Production Planning

Servicing and Repairing Electrical and Electronic Equipments. I have a Diploma in Electrical Engineering, a New Zealand Trade Certificate in Electrical Theory and Practice, and a New Zealand Registered Practicing Licence

Chemical Engineer, Process Operator,

To approve Method statements, Quality procedure, Inspection test plan as per specification / Vendors specification and co-ordinate with clients for approve Ensure all inspections are carried out as per ITP at work don

Working as Process Engineer. I have done M.Tech in Chemical Engineering & having 2 years of experience in the field of oil & gas processing.

Working experience of Water-Based Fire Suppresion Systems, Sprinkler Systems, Foam Systems, Passive Fire Protection Systems, Safety & Fire Fighting Equipment, Fire & Gas Systems,Standpipe Systems, Hazardous Area Classification, HAZOP, Man-hour estimation for proposals etc.

Bachelors Degree in Mining Engineering, Second Class Mines Manager Certificate of Competency (Restricted) from DGMS.

Materials Control, Handling, Storage, Warehousing

OFFSHORE PROCESS,FPSO OPERATION,SAFETY AND TRAINING AND WORKOVER OPERATIONS

Almost 10 years experience in detail engineering and construction for oil & gas, and petrochemical industry for Onshore LNG Plant, Onshore Gas Plant, Onshore Oil Gathering Station, Welhead Platforms, and Onshore/Offshore Pipeline, for clients such as: BP, PTT E & P (Thailand), PT Badak NGL, Caltex,

Hold mater unlimited license 3000 GT. Certified rig move master by John Lebhourihis and associates.Offshore experience 19.5 years on 3 independent jack ups as barge captain.Experienced in ship's hull and preload tanks steel repairs

I would like to mention that by working and associating with various concerns for the past 10 years I have acquired a vast knowledge of Sewage Treatment Plants, Waste water Treatment Plants and Reverse Osmosis Plants.

Re: Application for Employment as a Roustabout/ Roughneck I am willing to start at the bottom and work my way up within your organisation. I am prepared to work anywhere in the world.

HSE Advisory Position required. Extensive experience in the offshore oil & gas industry. Experienced in all aspects of HSE management

QA Engineer with Multi-Disciplines (Welding, Painting, NDT & Mechanical) Inspection background

Multi-talented/Multitasker - Facility / Safety Management, Hazardous materials Paramedic, trainer, Construction/General Industry background, Environmental compliance

My total relevant work experience is approximately 12 years. My recent experience has been gained working in site remediation and investigation at a level including project, personnel and financial management.

Many years of experience in various services in the oilfield. A hard working, career/goal oriented individual.

Environmental Specialist

currently located in Milan, Italy. I have all documents to work here in Italy. I am looking for job related to CAD, MICROSTATION, FRAMEWORKS. I have good experience in CIVIL RCC, STEEL, Underground drafting & detailing. I have good experience in 3D Modelling using PDS, FRAMEWORKS.

Logistics & Sales Manager

Possess ten (10) years of experience in design of various civil engineering facilities providing shelter and access to fellow humans in Pakistan, Yemen and Oman.

I am fresh candidate. Just completed masters degree in Applied Geophysics. Really keen to join industry and have potential to work of any degree.

-Academic background -Professional experience -Personal development are given below for a suitable job position in refractory/steel industry

I am basically possessing engineering background with enough experience in organisation and can able to perform all kinds of works pertaining to my field. i am having 10 years of handful experience and can deal any work effectively and complete the same within time schedule.

Heavy Plant Operator - 360 Excavators, Face Shovels rom 5 tonne to 200 tonne, Rear Dump Trucks from 5 tonne to 200 tonne. Loading shovels.

I have a Mining Engineering Degree and presently attending school at the University of Phoenix to obtain a MBA - Technology Management. My background encompasses supervision/management and project engineering while at BHP Copper (Magma Copper Co) in San Manuel, Arizona.

I have en extensive experience in detail design and stress analysis of piping system for LNG Plant, Petrochemical Plant, Oil Refinery Plant, and Geothermal Plant for both Onshore and Offshore Project for more than 13 years as Senior Piping Engineer/Senior Pipe Stress Engineer.

First Prev 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 [ 144 ] 145 146 147 148 149 150 Next Last

Seach Parameters


Goto Advanced Search...
Keywords: (e.g. mining engineer)		Find results with:

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out