Resume - Have 10 years experience in Majour Industrial Steel Processing Plant in Saldanha...

Misco Jobs

Resume #77701

CONTACT INFORMATION:
View contact information...

Application for offshore Hydraulic crew post/ Riggers post

I would very much appreciate a chance to work in the offshore oil industry. Although I am a Qualified Hydraulic Specialist I have done an Off Shore Survival Course, and SAMTRAC through NOSA. I would like to enquire as to the possibility of employment as E.H.S. Officer, or, as part of a Hydraulic Crew or ROV Trainee, or any other position your company would suggest, on one of your offshore installations. I am more than willing and prepared to begin at the bottom and work my way up in your organization. As can be seen by my credentials I am a fast and willing learner.

At present I have no offshore experience and am thus very eager to actively participate in any training course(s) you expect me to attend and complete successfully in order to achieve my goal.

In Short:
I am an easygoing type of person and I get along with most people. I can and will work well under pressure alone or as part of a team. I also do not mind working away from home for extended periods of time. I can be trusted to do my work alone, as part of a team or as head of a team without any supervision. I am conscientious and responsible and can take and effectively carry out orders. I am hard working and I am prepared to undergo any drug test and medical examination your company requires. My past work and credentials indicate that I can be an asset to your esteemed company.

My Curriculum Vitae is attached hereto for your perusal, trusting that my qualifications equates to your high standards of employment. Certified true copies of my certificates are available at your request.

Personal Details
Nationality: S.A. Citizen by Birth
Marital Status: Married. (No dependents)
Language Ability: Fully Bilingual
Health: Excellent
Criminal Record: None
Religion: Dutch Reformed Church
Reliable Transport: Motor Vehicle.
Valid licenses: Code A & EC (Prof. Driving Permit: General &
Personnel. Expire 10.06.2009
School: Monument High. Grade 10. 1974

Education & Training Grade 10 & Post School
1. Trade courses and Trade test 02.01.1975 –
27.10.1978: Qualified as Aircraft Fitter
2. Petrols, Oils and Lubricants Quality Control
Completed 29.10.1981
3. Nosa Safety for Supervisors Completed
22.10.1982
4. Nosa Teletuition Safety training Course
1985
5. Senior Technical Course for Non Commissioned Officers 1986
6. Senior Technical Non Commissioned Officers Development Course 1986
7. Quality Management 1986
8. Life Enrichment Course 1988
9. Official Languages Testing Course (Africans & English) 1988
10. Quality Evaluation Course 1990
11. Life Enrichment Course 1990
12. First Aid Course 1991
13. Labour Relations Course for Supervisors 1993
14. Inspection, Preservation and Packaging Course. 1994
15. Aircraft Corrosion Control 1994
16. First Aid Course ?

Decorations and Medals: 1. Propatria Medal
2. Service Medal
3. Long Service Medal Bronze 10 Years
4. Long Service Medal Silver 20 Years
5. Unitas Medal

Commendations: 1. Colours Parade for Freedom of Hopefield
Signed by Mayor Baard 1989.
2. Expression of Thanks by AFB Langebaanweg for Good Service Signed by Col. Labuschagne

Computer Literacy: 1. M.S. Word
2. Excel
3. Internet & Email

Employment History / Job Description:

1. South African Air Force 1975 – 1996.

I. Qualified to work on following Aircraft, Airframe and Engine

Cessna 185 1st Line Servicings.
Kudu 1st and 2nd Line Servicings.
Dakota 1st Line Servicings.
Impala Mk1 Up to and Including 6 Monthly Servicings.
Bosbok 1st and 2nd Line Servicings

Competency for following Tasks on above Aircraft.
a. Marshalling b. Towing and Ground Handling c. Refueling d. Operating of Hobart Starters e. Ground Run f. 1st Line Servicing of Elect. Equip. as fitted to Kudu Aircraft. g. Removal and replacement of Safety Pins on Mk AS 06A Ejection Seats h. Operating and Driving Following Bowsers:
i. Bedford 4x4 4500LT ii. M/Benz 5000LT iii. Man 16000LT iv. M/Benz 26000LT i. Operating and driving Forklifts 3-7 T

Experience Gained in the Following Sections a. Head of Section Flight Line and Flight Line Servicings b. Aircraft Servicing Sections c. Base Aircraft Servicing Section d. Squadron Safety Officer at Air Force Base Langebaanweg for Three Years e. Acting Head of Section for Six Months Air Force Base Hoedspruit Mirage Engine Workshop f. Head of Section Wheel Bay Two Years Air Force Base Hoedspruit.

2. SMC Joint Venture 1997 – 1998
Worked as Hydraulic Fitter on Construction of Saldanha Steel
Assist with Construction of the Continuous Caster Hydraulic Systems including:

a. Hydraulic Pipe work from Hydraulic Room Valve Stands to Ladle Turret, Tundish Turret, Continuous Casting Machine (Segments), Pendulum
Shear, Rollout Table and Dummy Bar.
b. Charging of Hydraulic Accumulators. c. Flushing of Completed Systems. d. Tracing and Connecting of all Hydraulic Pipes to Cylinders, Motors, Pumps, Valves etc. e. Commissioning of Systems
Assist with Construction of Electric Arc Furnace Hydraulic Systems including: a. Hydraulic Pipe Work in Hydraulic Room from Pumps to Valve Stands b. Hydraulic Pipe Work from Valve Stands to Furnace 1 and 2, Roof Lifting Cylinders, Roof Slew Motors, Roof Loosening Cylinders, Roof Elbows, Emergency Hydraulic Panels and Electrode Arm Turret. c. Charging of Hydraulic Accumulators. d. Flushing of Completed Systems. e. Tracing and Connecting of all Hydraulic Pipes to Cylinders, Motors, Pumps, Valves etc. f. Commissioning of Systems. Assist with Construction of Ladle Heating Furnace Hydraulic Systems including: a. Hydraulic Pipes in Hydraulic Room from Pumps to Valve Stand b. Hydraulic Pipes from Valve Stand to Roof Lifting Cylinders, Electrode Arm Turret and Slew Motor. c. Flushing of Completed Systems. d. Tracing and Connecting of all Hydraulic Pipes to Cylinders, Motors, Pumps, Valves etc.

All of the above mentioned installations were done by bending 8mm up to 42mm stainless steel and carbon steel hydraulic tubing as well as installing ½" up to 24" stainless steel and carbon steel schedule piping. All pipe work was done with the assistance of coded welders.

My contract at SMC was ended upon the completion of the Steel Making Side of Saldanha Steel. An American Contracting Company – CBI, did the Iron Making Side of Saldanha Steel.

3. Fluid Flow Contracting up to 15 September 2008

Occupation: Hydraulic Specialist / Sales Manager.

a. As Hydraulic Specialist I did the flushing of the pipe work at the Corex at Saldanha Steel in conjunction with Raur Rine Chemicals for CBI b. As Hydraulic Specialist I did repairs on various Hydraulic Pumps, Motors, Cylinders and Valves directly for Fluid Flow Contracting. These were done in the workshop as well as on site. (The main make names dis- tributed by Fluid Flow are Parker, Vickers, Eaton, Charlyn, Bosch and Danfos, and thus I know them very well.)
c. I visited Industrial Sites to look at jobs, determined what spares will be needed, calculated how long it will take to do, considered safety aspects and all special equipment that will be needed to carry out particular installation or repair. d. Assisted with building of Hydraulic Power Packs and test Benches at Fluid Flow Workshop e. Assisted with planning, developing and manufacturing of a new Accumulation System at Pendulum Shear Hydraulic System at Continuous Caster at Saldanha Steel.
f. Worked on Shut Downs and Breakdowns at all hours of day and night. g. Was head of the day shift working on the repair (reinstall all hydraulic, pneumatic, water and grease pipes) at the Saldanha Steel Electric Arc Furnace Shell 1, after a Burn Through. Also lead the night shift repairing all of the same pipes at Saldanha Steel Electric Arc Furnace Shell 2, after a Burn Through.
h. Made up Hydraulic Hoses from single wire to multispiral hoses. i. Was part of the team Installing new Clay Gun and Drill on Furnace 2 at
Namakwa Sands Saldanha j. Designed and assisted in manufacturing of a Portable Tap Floor Drill for the Corex at Saldanha Steel. k. Modified Grease piping, Hydraulic piping and Water piping on Continuous Caster Segments to ensure quicker and easier changing of Segments on Breakouts and standard Maintenance. l. Was part of a 2 man team installing a 3" Pneumatic line complete with Dryer / Heater at Iron Granulation Plant at Saldanha Steel.
m. Designed 3" Refill line for Oil from Total Bulk Area to Continuous Caster Bulk Tank. (+/- 420m). Engineered Installation, Cleaning and Commissioning of line. n. Designed, contracted outside company for manufacturing, and was part of the 2 man team installing the Bin Opening & Closing Mechanism for
Tail end Bins on Mine at Namakwa Sands Brand se Baai.
o. Overall did various large Hydraulic, Pneumatic, Grease and Water Instal- lations at Namakwa Sands Saldanha, Namakwa Sands Brand se Baai, Saldanha Steel, Duferco Steel Processions, Southern Seas Fishing, Marine Products, Oranje Vis and Saldanha Fish Canning Factory. a. As Sales Manager all Incoming and Outgoing Sales were handled by me. I made sure that prices quoted corresponded with prices on delivery notes. I made sure that deliveries to the Stores were done on or before the dates stated on the clients official orders. I worked closely with the Workshop Manager to make sure that delivery notes for completed jobs went out in time to be signed off by the Client. b. I did Field / Site trips to look at jobs, ascertain what spares will be needed, calculated how long job will take to do, considered all safety aspects and special equipment needed to carry out installation or repair. c. Communicated with Clients to ensure that I know exactly what the client wanted done and made suggestions on how to do work in the Fastest, Safest and most Cost Efficient way. d. Also informed New and Existing Clients on what services and products we could provide them. e. Assisted Store Personnel at times when high volume of equipment was received from Suppliers and booked out to Clients. f. Did Quality Control Inspections on items received. Made sure that items were in sealed containers that part numbers, prices and quantities corres- ponded with order placed with Suppliers. g. Did Quality Control Inspections on items being booked out to Clients. All items specially manufactured by the company was to have Job Number stamped on it, must be sealed in a container, and must be accom- panied by a test certificate where applicable, in the correct quantities. h. Did Quality Control Inspections on items being booked out to Clients. All items received from Suppliers and supplied directly to Clients, were checked against the Clients Order to make sure that correct items, quantities and pricing were received. I also made sure that goods such as pumps, motors, valves and cylinders had test certificates supplied by the Main Supplier. Furthermore, I made certain that all threaded parts were protected. i. I followed up on orders and late deliveries and communicated with Client i.c.w. expected arrival date etc. j. Wrote official failure reports to Suppliers if goods supplied did not conform to standard of quality. k. Attended meetings at Distributors to keep up with latest equipment and procedures. l. Where items could not be obtained from local Distributors, I went on the internet to source goods from other Distributors, both in South Africa and Overseas. m. Sent enquiries to various Distributors / Suppliers to obtain the best Prices and Contracts.

Please Note.
1. All certificates and proof of training mentioned in this C.V. is available on interview.
2. Remuneration will be discussed during interview.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 6901 to 6950 of 15508)

Go to Search Parameters...

Brief Description

PLC,SCADA

AutoCAD, ProE,

Materials expertise, inventory,issue and received handler

Iam Diploma Holder in Mechanical Engineering and having 9 yrs of oil and gas experience.Maintenance and construction experience.Both as a technician ans staff level coordinated activity

Sales chemical engineer

Bs in Petroleum engineering , field engineer

Reliability engineer, plant engineer, manufacturing engineer, expert in kiln and ball mills, hydraulics pneumatics

DRILLING ENGINEER, EXPERIENCE - 4 YEARS IN OIL FIELD AS DRILLING ENGINEER

Free! A motivated self starter and team player/builder with 30+ years of Canadian and International upstream oil industry experience. Skilled project manager and problem solver. High level of computer literacy.

I having more than 9 years of experience as a Piping Designer PDS in the field of Oil and Gas (Offshore /Onshore), LNG, Refinery and Petrochemical Industries

Mechanical Engineer - Maintenance / Planning / Project - 13 years of experienc.

Geological and Geotechnical Core Logging for Exploration drill core and Mining. Have experience Training and Supervising technical staff in this field.

Creative, tenacious, analytical, result-oriented professional with proven success in streamlining procedures, managing projects, analyzing products or processes, and increasing department efficiency through effective business strategy. Seeking admission to be as world class Quantity Surveyor

Geologist/geophysist (seismic processor) was working in WesternGeco (Schlumberger) for 16 months.

Seeking for challenging and rewarding opportunities in a dynamic and reputable organization where mutual interests and achievements will be maximized.

I have completed Mtech in applied geology,i can do mining plan in iron ore,core logging,quality control of ore,

I have HND in Building Technology. I also have good knowledge of AutoCAD. I had been involved in construction work at different capacities.

I have and engineering management degree and currently in an MBA program , and will be through this quarter. Very proficent in MS project tool, MS office tool, minitab

A high skilled Well Test Engineer.

Architecture CAD Drafter

I hold a Bachelor of Science degree in Sociology, my core competencies are Administrative and Human Capital Development, Relationship Marketing, Business Analysis and Development.

I would like to apply H2S Technician or others position suitable at your company. I had been 10 years experience in geothermal industry since 1994 trough 200

I'm a qualified red seal mechanic, done courses on drill riggs and are a qualified blaster and magazine master. I've done the Make Safe and Health Course. I was Site Manager for a Drill Company, blaster and drill rigg machanic for the past 6 years.

Piping design engineer

I have 10 years experience in the oild industry. 5 years as driller and 6 months as Relief Tool Pusher. I amready to go to work as soon as possible. I have my current Well Control and Passport. I have H2S training, Fall Protection, & First Aid

Petroleum Lab Tech

Title Research; Sovereignty to present

I am Petroleum Geophysics MSc Student at Imperial College London.I have a background in Physics and skills in the use of RocDok,SMT,Claritas Globe,Matlab and Petrel softwares.I also have good and effective communication skills,excellent report writing and presentation skills.I am a good team player.

Experienced project manager in landscape sectors, 25 years practical management experience in commercial and residential fields including high-end, M.Sc. and B.Sc. horticulture, M.B.A. pending

pi[ping eng 3+ experience

Currently seeking a “Drilling Operations” position , internationally within the upstream petroleum industry

Peoplesoft Technical Consultant

Quantity Surveyor

Land Surveyor

Mineral processing engineer, metallurgist, flotation, copper, sulfide ore, molybdenite, milling, flotation test

I have been working in the mining industry for over thirteen years. For the last 5 uyears I have been working as a Jumbo Operator. I also have extensive expereince in Tele Remoting, Bogging and all aspects of develpmental mining.

Have 10 years experience in Majour Industrial Steel Processing Plant in Saldanha, South Africa doing Hydraulic maintenance. Have been doing all buying and selling and sourcing of goods over internet. Also went to site to do job estimations and Representative work. Did Offshore Survival course

Petroleum Engineer (B.Tech- PE) with 4 yr of Exp : Exp in Reservoir Modeling, Production Modeling, Integrated Asset Modeling, Gas Lift Optimization, Workover, MBA, DCA, Stimulation and Reservoir Studies

Highly self motivated and goal-oriented professional committed to pursuing a long term career in petrochemical / chemical industries. Has 11-year experience on maintenance, repair and routine calibration, with strong analytical and problem solving skills, on analyzers.

A self-motivated and task-oriented Chemical Engineer with 10 years experience and proven track record working in the manufacturing environment of an MNC.

Diploma in Civil Engineering,Civil QA/QC inspector

Seismic Data Processing QC, Supervision and Management experience. International experience in Northa nd South America and Europe. Experience with artic data, high-resolution surveys heavy oil suveys, shallow water, TZ, and complex over-thrust data.

Mechanical engineer, qa qc engineer, construction engineer

Mechanical Supervisor in construction & maintenance of mineral processing plants. From primary crushing thru to gold room or concentrate loading,have extensive experience with installation of SAG & Ball mills, ex-pat in Ghana, Tanz,Thailand, and all of Australia

E/I SUPERVISION for construction , commissioning of Oil & Gas processes

„« Reservoir Engineering, fluid property analysis, pressure transient analysis, reservoir characterization, reservoir management, and good knowledge of production optimization (managing wells), and understanding of surface facility issues.

+15 years experience pulling ,running and comissioning ESP completions world wide. Run life development etc

Electrical Engineer, Automation and Controls Dessign, Testing and Commissioning Engineer, Project Engineer, Support Engineer

Masters degree in Civil/Structural engineering with more than 9 years experience in Oil & Gas projects for prestigious clients. Have about 7 years experience on Canadian projects including modular engineering (lifting, transportation analysis). Proficient in US, Canadian and Indian Codes.

First class marine engineer

First Prev 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 [ 139 ] 140 141 142 143 144 145 146 147 148 149 150 Next Last

Seach Parameters


Goto Advanced Search...
Keywords: (e.g. mining engineer)		Find results with:

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out