Resume - A well-rounded production person having worked at all levels from production ope...

Misco Jobs

Resume #77719

CONTACT INFORMATION:
View contact information...

Dates July 2008 to Present.

Employer Ipedex Oman LLC. On Contract to Occidental, Mukhaizna Field, Oman.

Role. Start Up Specialist.

Pre-commission and start up MVC multi effect water polishing units (7 trains)using Aquatech Process. OJT of local staff. Whilst running the trains to on spec requirements to provide quality water for steam production for re-injection to Heavy oil Wells for Steam Flood Lifting. Oil gathering and separation to holding tanks for export to main pipeline.

Dates: February 2008 To May 2008..
Employer: British Gas Tunisia, (BGT). Hannibal Gas Treatment Plant Sfax Tunisia.For
2008 shutdown.
Role: Permit To Work Co-ordinator / Night Shift HSE Advisor.

Dates: January 2007. to September 2007..
Employer: AIOC (BP). SPS Yard Baku Azerbaijan
Role: Permit To Work Co-ordinator

To Operate The permit to work system for BP operations for the DWG Platform.

Dates: September 2006. to October 26, 2006.
Employer: AMEC. ATA Yard Baku Azerbaijan.
Role: Senior Permit To Work Co-ordinator

Setting up of the PTW Office in ATA Yard in Baku Azerbaijan, And Run The permit to work system jointly used by ATA (yard owner) and BP Operating Company. Also to train the Azerbaijani nationals in all aspects of the job to BP Standards and access Area and Performing Authoritys

January. 2005 to August 2006

ADMA-OPCO Offshore Khuff Gas Development Project
Permit To Work Co-ordinator

Set up of a PTW Office in NPCC Rig Yard at Mussafah, Abu Dhab
Start to run a permit to work system jointly used by NPCC and Adma To control ongoing construction work and the newly introduced commissioning phase on the NKPP and TA Platforms.
A total of 800 workforces. Controlling with 2 assistants. A large daily turn over of permitry

May 2000 – Present Aquatic Engineering Ltd, Myanmar ( Burma)
LEAD / SAFETY PRODUCTION TECHNICIAN,

To oversee all the safety aspects of the normal running of the platform and the accommodation barge. Compelling scenario's for on the job training for all emergency response teams. Controlling the permit to work system between normal operations and construction and all vessel & tank entry inspections. Also controlling SIMOPS between wire line and drilling operations. Liaising with management on all safety issues. Updating drawings and procedures as and when required.

LEAD PRODUCTION TECHNICIAN,
Job summary / Key Responsibilities:
On contract to Petronas Carigali Myanmar {Hongkong} Ltd on the Yetagun Platform in the Andaman Sea.The complex comprises a wellhead and production platforms currently producing 300 mmscf/d compressed by two Solar Mars Compressors to a pipeline to Thailand, and 5,400 bpd of condensate to a slave tanker. Water & hydrocarbon dewpoints are achieved by TEG dehydration & propane refrigeration. Condensate stabilization to 9.7 RVP is via a stabilization column. Produced water is routed through hydro cyclones to a water polisher to maintain overboard water quality. Process control is via a Scada system. Following commissioning my main duty is the training of Myanmar Nationals to North Sea standard. And to run my shift in a safe and efficient manner. I also stand in for the Production Supervisor as and when required.

September 1999 - May 2000 Single Buoy Mooring PRODUCTION TECHNICIAN, Singapore
Job summary / Key Responsibilities:
Employed in the Keppel shipyard in Singapore pre and commissioning their FPSO Espadarte V1 for work in Brazil. The ship is a VLC Tanker with a holding capacity of 1.8mm BBLS. The oil plant has a capacity of 100,000 bbls of oil a day through the trains, and 50,000 BPD of produced water 110,000 BPD water injection and gas compression of 2.5 mscf/d. On board we have two-separation trains consisting of two HP Seps, one test, one second stage, a coalescer, three crude oil heaters, and four heat exchangers. Heating and cooling medium systems. It has a gas compression train consisting of gas Caterpillar engines 3616 driving Dresser Rand 3 stage reciprocating compressors delivering 80mscf/d for gas lift export and normal platform user. Three solar turbines two for power generation and one for water injection, a dehydration system two air systems instrument air and a start air facility. In the control room we had a specially designed control system by Moors for process and cargo operations Wormald fire and gas panel.

May 1997 – Sept 1999 For Maersk PRODUCTION SHIFT LEADER / CONTROL ROOM OPERATOR, Britain
Job summary / Key Responsibilities:
My duties here included supervising the Production and Marine operators, and reporting to the Production Supervisor in running the process plant safely and efficiently, monitoring and controlling the plant via the PCS, monitoring the Fire and Gas and Safety Critical Systems, preparing daily reports, carrying out well tests and associated reports, collating information for our onshore support teams, relaying information to our clients base in Aberdeen. I was also the permit controller on my shift. My other duties include cross training personnel from other departments in production duties, and general training of new members to the production team. I also stand in as Production Supervisor liaising with the OIM and attending morning telephone calls to the management on shore.

July 1991 – May 1997 PRODUCTION OPERATOR, Britain
Job summary / Key Responsibilities:
T.A. Engineering Ltd. On contracted to Mobil North Sea LTD, on the 'Beryl Alpha' platform. Working on the following systems associated with the Beryl Alpha production platform, I have passed the competency assessment modules set by Mobil on the following systems. Well heads / Separation, two well bays with associated Kill systems. Gas lift facilities, two separation trains (LP & HP). Test and Fuel Gas Separators, Flare and Blow down systems. Gas compression (LP, HP), Sales gas compression trains, Twin shaft Gas Turbine Drivers linked in tandem to four stage centrifugal compressors. Twin Glycol Regeneration units, seawater Injection and Subsea Wells. Utilities: Tanker loading, Ballast water system, Sea Water Lift, Firewater and Foam systems, Power generation, Heating and Cooling Medium systems, Heating and Ventilation systems, Instrument and Utility Air supplies, diesel and potable water transfer and distribution. Sampling well tests and laboratory techniques. No deviation from clients' specifications and procedures, with stringent adherence to Health and Safety Regulations and Permit to work procedure. Critical programs to meet clients' specifications.

JAN 1985 – JULY 1991 PRODUCTION OP / STAND-IN PRODUCTION SUPV.
Job summary / Key Responsibilities:
O.D.C.C on contract to Hamilton Brothers Oil and Gas Ltd. Deep sea Pioneer (Floating production facility). Three Phase oil, water and gas separation. Gas compression (gas lift), Spectra-tek Gas Flow computers. Ruston gas turbines. Sub sea hydraulic control panels (satellite wellhead controls, sub sea manifolds). HP Water injection (seawater lift pumps, booster pumps, fine and coarse filters, de-aerator tower and vacuum pumps). Daniel fiscal flow computers and meter proving systems, Direct loading to Tanker, Chemical-dosing pumps. Sampling testing of crude oil gas. Water injection and Lube oil. Production Control room duties including: - Wormald Fire and Gas detection and E.S.D systems, hour daily metering reports, other duties were to liase with diving vessels in the repair of faults on Wellhead flow line umbilicals and control lines.

JAN 1979 - JAN 1985 ROUGHNECK / TRAINEE PRODUCTION OP. Britain

Job summary / Key Responsibilities:

Dover Oil and Gas on contract to Hamilton Brothers. Oil and Gas Limited. On the Transworld 58 (Floating Production facility) Helicopter servicing. Riser running and recovery, Loading and unloading cargo supply and field dive supports vessels. Rigging and general deck duties. Promoted from this position to the post of Trainee operator in the production department September 92, after initial training period I progressed to the position of Production operator in June 83. During my period on board the Transworld 58 I became familiar with the operation of all equipment associated with a Floating Production Facility. This included all deck, helideck and production operations from satellite wellhead control through to oil and gas separation. Well testing, Single Buoy tanker loading and associated metering and reporting.

PROFESSIONAL TRAINING / CERTIFICATION:

Medical Valid to January 2007.
Offshore Survival RGIT Valid to December 2003.
Oct 1988 Production Operators Course.
Mar 1991 Safety Rep & Safety Committee
May 1997 Process Operations Course.
May 1997 ICS Control & Safety Systems Operations.
June 1997 Regent System Overview Course.
June 1997 DCS {CROMOS} Operations Course.
June 1997 Fire & Gas {Regent} Operations.
June 1997 Advanced Scada System Training.
July 1997 Work Management [PTW} Signatories Course.
Jan 1998 Authorised Gas Tester Level 2.
Feb 1998 Petroleum Tanker Safety Systems Course.
Dec 1998 Work Management Platforms Co-ordinators Course

COMPUTER SKILLS:
Computer literate - conversant with Windows programmes and applications
ICS Control System. Scada Systems. Emerson DCS Data V.

References:
Will be provided

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 3201 to 3250 of 15508)

Go to Search Parameters...

Brief Description

Experience in developing PFD’s and P&ID’s to IFD and to IFC.Experience in line sizing, pump sizing, control valve sizing, relief valve sizing and vessel sizing. Experience in preparing LDT documents, Rev Lists. Proficiency in process design software like ASPEN PLUS,HYSYS, PRO II.

Trouble shooting of problems in various field instruments, DCS (Honeywell – TDC3000), I Have deep knowledge in Gas Turbine and Compressor related instrumentation systems

I have drilled over 100 wells, both explorational and development. I have directly planned and executed major drilling, recompletion, and completion programs. I have designed well logging programs. I have also participated in extensive reservoir characterization studies.

Mechanical Engineer with 18 years of experience, Ten years in BEML, a Leading manufacturer of Mining Machineries in India as Service Engineer and Eight years in Raw Material Division of Tata Steel Limited (Fifth Largest Steel company in world) as Senior Manager, Maintenance for Heavy Earth Moving M

I worked for (Shaft Sinkers International) 21 years where I gained a lot of training and experience locally and overseas on Shaft Sinking & Trackless Mining in Brazil, Chile, Argentina, Laos, Switzerland, Tanzania, Zimbabwe and Macedonia.

Experienced distribution center in-charge, materials planning and control handler, and warehouseman (total 14 years) and mechanical engineer in practice as power plant maintenance and engine tender. Computer literate, resourceful, constructive decision maker. Easily adapts to any working environment

Construction/Commissioning Instrumentation & Control Superintendent, or Project Management (PMC-role), or I & C Field Engineer/Supervisor, or I & C Maintenance Engineer

16 Years of Experience; Experience in managing the Quality control & Quality assurance activities for large integrated engineering projects. Exposure in vendor documents, correspondences with client, vendor, carrying on stage & final inspection with client. Exposure to International code

Planning & Scheduling by Primavera P3; Structural Design by STAAD-PRO 2004

From 2005 Clough Engineering & Integrated Solutions (CEIS) Pty Ltd

I am civil engineer, working as consruction planning engineer at Mott MacDonald India from India And seeking job at Austrilia with visa support from employer.

Structural draughtsman, working sice last 14 yeards, with 2 yrs. gulf experience,

Senior Maintenance Planner experienced with Ellipse, Mobile & Fixed Plant

Boiler Purchasing, erection, commissioning, startup, troubleshooting experience.

A well-rounded production person having worked at all levels from production operator through control room lead tech to supervisor. Trained in all aspects of the oil and gas industry (well heads, 3-phase separation, compression, reciprocation, turbine, centrifugal, refrigeration, gas lift, gas injec

Well verse in blasting and painting for the past 20 years

heavy equipment mechanic

Sutina is the Country Knowledge Manager for Deloitte Consulting Malaysia. She has 5 years knowledge management experience in the professional services environment. At present, she works extensively with the firm's intranet, soliciting and managing content, establishing guidelines and processes.

8+ years of experience in the field of IT with experience mainly in Customized Enterprise Planning Solutions (ERP), Business Process Management (BPM) and Management Information Systems (MIS). Wide experience of System Analysis, Project Management and Client handling.

CAD Drafter with 14 years of experience in most commonly used software for Architectural and Civil Engineering Firms.

25 years in coal mining experience, willing to relocate, hard worker, willing to work overtime, available as soon as possible

I have 30 years experience working in Oilsands Upgraders as a control room operator and start-up and commissioning operator. I am currently working on expansion and growth plans of Suncor for their MNU Project. I work with Engineering houses to include operations input for operability and safety in

run different types of cranes. friction, tower, experience in pile driveing. 30 yrs.e xperience

Handling of ATF, Refuelling/Defuelling of aircraft.

Sales of Industrial products like Pumps,Mechanical Seals, Fluid Sealing Products

The maintenance of comprehensive accident and dangerous occurrence statistics for the Project

SKILLS: Leadership. Team Development, Conflict Management, Planning & Scheduling, Rock Blasting, Project Management. EDUCATION: BS degree in Mining Engineering & Numerous Professional Certifications

I'm a qualified Medical Graduate (MBBS) with almost 14 years of Clinical Work experience, mostly in the areas such as Emergency Medicine, Internal Medicine, Trauma, Tropical & Infectitious Diseases and Public Health.

25 years experience in IT industry, now specializing in J2EE, Service Oriented Architecture (SOA) and Radio Frequency ID (RFID) solution integration to Enterprise Information Systems (EIS). Willing to travel 100% worldwide.

Chemical Engineer with more than 20 years experience in construction, testing, precommissioning and commissioning of utility plants in Oil & Gas, Fertilizer and Petrochemical industries.

I'm a Science Graduate. B.Sc., from Andhra University, INDIA in 1985, Working as Comissioning Engineer With LURGI team since Sep-2007. well versed with Pre commissioning, commissioning, start up, Normal/ Emergency shutdown activities and performance test of PDH (Propane D ehydrogenation) Plant.

Has over 20 years experience in EPCM projects with extensive experience in purchasing, contract administration, cost estimating and production planning. Relevant manufacturing experience in pressure vessels, plate works.Language skills: English, French, Spanish, German, Portuguese.

Well rounded trainer/instructor/worker who is willing to be a part of a team whose primary goal is safe and effective work efforts. I am fully European standards trained airport/commercial property fire fighter and also multi skilled in various areas such as mechanics and repairs.

Over 20 years (5-1/2 years in India and 15 years in Gulf) of experience in the field of Pipelines in reputed Engineering Consultancy firms. Worked as a Lead Pipeline Engineer for various PDO (Oman) and Saudi Aramco Oil/Gas cross country pipelines and in-plant pipeline tie-in projects.

Over 20 years of diversified experience in Quality system Management, Environmental Management Project Management, Contract Management, Customer Satisfaction Management (CSM), Customer Relation Management (CRM), Contract and Scope Calibration, Technical and legal evaluation, Contract Regulation Mana

Metallurgical/Materials Engineering, failure analysis of gas turbines components, remaining life assessment, gamma prime growth morphology in nickel-base superalloys, high temperature coating degradation and failure mechanism, creep behavior of the alloy, fatigue crack initiation and growth

Corrosion control, cathodic protection

Electrical and electronics engineer with 24 year experience in a major fertilizer, chemical and petrochemical industry. Also have a strong back ground in communication field

DUTIES: Overseas experience in East Africa -Mozambique and various remote locations in Australia on OD&E Double ,Tripple and Work Rigs (Ideco H-725,Cardwell KB 700,Kremco K-600,Ideco 1200ED-SCR,National 610E-SCR,Franks Cabot 300) encompasing all standard and preventative mechanical maintenance on al

Over 16 years of experience working as a Process Engineer including 5 years as Lead Engineer supervising/coordinating engineering design teams in multidiscipline engineering companies. Has executed Conceptual Design, Front End Design and Detailed Design projects in Oil and Gas, Refineriese etc.

Materials Management, Logistics & Supply Chain Management, Stores & Inventory Control, Warehousing & Distribution, Coordinator.

Qualifications: BSC Electrical Engineering, Corporate member of the Institute of Electrical and Electronic Incorporate Engineers,

More than 20 years of professional experience in engineering design, construction and project management. Familiar with international standard including Saudi Aramco Engineering Stds. & design practice. Well verse in engineering software for electrical power system design analysis.

Industry and project experience in developing, analyzing, training and implementing simulation and advanced process control for refinery, chemical, and petrochemical operations.

17 years of experience in all phases of plant operations, production, trainning, environmental

A Senior / Chief Estimator level experienced in Oil & Gas, Mining, Power plants, Manufacturing. Representing Owner, EPC and EPCM companies, Over 25 Years.

22+ years of professional knowledge and experience in QA/QC Engineering and Field Civil Construction on EDPC onshore oil/gas/petrochemical plants, defense, infrastructure projects in the Middle East, UAE, Iran and North Africa.

Drilling Manager/Superintendent/Engineer with 14 years of international experience.

Project Management; General Management; Commercial Management; Project Director; Oil & Gas, Petrochemical; International; EPC/EPCM, Construction, Contracting, Joint Ventures; 30 years experience; Successful track record; Flexible and adaptable.

Over 25 years of design, engineering, Project and Construction Management experience for a variety of projects and fields.

First Prev 51 52 53 54 55 56 57 58 59 60 61 62 63 64 [ 65 ] 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 Next Last

Seach Parameters


Goto Advanced Search...
Keywords: (e.g. mining engineer)		Find results with:

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out