Resume - -Primavera (Deep knowledge and experience) / SAFRAN planning program / AutoCAD 2...

Misco Jobs

Resume #77788

CONTACT INFORMATION:
View contact information...

Personal Data:
Date of Birth: 31 March 1975
Nationality: Egyptian
Marital Status: Single
Education: B.Sc. of Civil Engineering 1999, Cairo University
School: The Holy Family School – Helwan.
Language Skills: Arabic: Mother tongue
: English: Fluent / French: Good

Objective: Senior Planning Engineer in large scale projects (Power Plants / On-shore & Off-shore Oil & Gas / Industrial)
Computer Skills:
-Primavera (Deep knowledge and experience)
-AutoCAD 2-D (Professional use)
-SAFRAN planning program.
-Workable knowledge with SAP2000 & PDMS.
-Microsoft Office Programs.
Job Qualifications:
Construction / Commissioning Planning Engineer:
- Preparing, Updating & Following up the planning schedules for engineering / manpower / materials / fabrication / delivery / construction & commissioning activities using Primavera & Excel programs.
- Monitoring progress, productivity & preparing the Weekly, Fortnight & Monthly Reports.
Technical Office Engineer:
-Engineering & Coordination work for civil activities on site (Concrete & Steel structures / Landscaping / under ground networks / Marine work ).
-Preparing, Review and Issue Workshop drawings for Steel & Concrete Structures.
-Preparing, Review and Issue the Bill of Quantities (B.O.Q.'s).
-Solving Technical problems on site through R.F.I.'s / N.C.R.'s / D.M.R.'s).
-Workable knowledge with International Standards.

RECORD OF PREVIOUS EXPERIENCE:

June 2008 to Present, SICIM S.p.A. – Kazakhstan.
Technical Office / Planning Engineer for KASHAGAN DEVELOPMENT EXPERIMENTAL PROGRAM project – under ground network facilities (SICIM scope).
DUTIES:
-Following up the Fabrication, Construction progress for the under ground network (Manholes, Catch Basins, Fire Water, Oily Water (gravity & pressurized), Closed Drain,. .etc.).
-Following up material plan and delivery on site.
-Preparing the GA & Co-ordination drawings for under ground network facilities.
-Attending the Weekly / Monthly engineering meetings.
-Preparing & following up the TQ from SICIM to client (AGIP).
-Training SICIM staff for using Primavera program / preparing & updating the schedule / managing the resources & budget / preparing the weekly & monthly reports.

December 2007 to May 2008, MIS – SHARJAH / UAE (Maritime Industrial Services) - (International Petroleum Services Company)
Project Planning Engineer for Construction of Off-shore F & G SUPER M2 JACKUPDRILLING RIG-1 (8000 tons) Project.
DUTIES:
-Following up the Rig Fabrication, Construction & Mechanical Completion (MC) progress for different disciplines (Electrical, Mechanical, Instruments, Piping,...etc).
-Updating the Primavera planning program & preparing the weekly / Fortnight / Monthly progress reports.
-Preparing the Man-hour Histogram, S-Curve & Trend Analysis for all disciplines (Engineering, Procurement, Construction & Commissioning).
-Attending the procurement and production progress meetings.
-Preparing Monthly, Fortnightly & Weekly progress report for all disciplines.
-Managing the budgeted man-hours for the base scope & change orders per job numbers.

June 2007 to November 2007, BP - British Petroleum (International British Petroleum Company)
Construction / Commissioning Planning Engineer for SAQQARA On-shore & Off-shore Project (Alexandria - On-shore for Construction & Pre-Commissioning work / Ras Shukier – On-shore Terminal & Off-shore Installation, Hook-up & Commissioning work).
DUTIES:
On-shore work:
-Following up the Deck Fabrication, Construction & Mechanical Completion (MC) progress for different disciplines (Electrical, Mechanical, Instruments, Piping,...etc).
-Updating the Primavera planning program & preparing the weekly progress reports.
-Attending the weekly and monthly progress meetings.
Off-shore work:
Preparing the Off-shore hour by hour plan for the following:
-Deck lifting & installation activities (equipment, tools, manpower, transportation,…etc.)
-Hook up activities (Production line, Drain caisson, Sea water caisson, Umbilical,…etc)
-Commissioning activities (Electrical, Instruments, Piping, Mechanical,…etc.)
-Production line sub-sea activities (Flooding, cleaning/Pigging, Hydro-test,…etc.).

January 2006. to October 2006, William HARE International British Company – UAE-Abu Dhabi)
Engineering Dept. - Senior Planning Engineer (for Company LNG projects in Qatar & Other projects in the Gulf Countries).
Company Profile: William HARE is one of the large scale international companies specialized in steel design, detailing & fabrication.
Company Projects: W. HARE is the Contractor Company which prepares the connection design, detailing and fabrication for all steel structures in Qatar Gas LNG Onshore project in Qatar, besides preparing the engineering and fabrication for steel structures for other large scale projects located in Saudi Arabia & other countries.
DUTIES:
-Planning work & following up engineering time schedules for W. HARE branches in UAE, India & Manila for above company projects.
-Planning work & Technical co-ordination between William HARE and the client (Technip / JGC / CHIYODA / GEA BTT / Snamprogetti).
-Arranging & Following up the engineering plan with clients to issue IFC documents (Issued For Construction) from Clients.
-Following up with clients the TQ's (Technical Queries) issued from W. HARE.
-Planning & Following up the updating for new revisions and modifications received from Clients.
-Attending the weekly & monthly meetings with the clients to follow up the over all engineering schedule and progress.
-Managing the engineering man power & Expediting work progress in W. HARE branches.

June 2005. to September 2005, CRC (Construction and Reconstruction Engineering Company – UAE-Dubai & QATAR-Doha)
Technical Office Engineer- ( Quantity Surveying & Workshop Drawings) for The company projects in UAE and QATAR.
DUTIES:
-Preparing, Review the Bill of Quantities for Tenders and final B.O.Q.'s.
-Prepare the Price list for B.O.Q.'s.
-Preparation & Review the Formwork and Reinforcement Workshop drawings using AutoCAD program.
-Solving Technical problems on site asked by the Sub Contractors by "Request For Information's" (R.F.I's).

April. 2005 to May 2005, Samsung (International Company - Main contractor)
Technical Office Engineer in the project of the American University in Cairo – New Campus Development.
DUTIES:
-Engineering work for Concrete & Steel structures.
-Preparation, Review and Issue the Formwork and Reinforcement Workshop drawings using AutoCAD program.
-Preparation, review and issue Bill of Quantities (B.O.Q.).

April. 2004 to March. 2005, e.construct (UAE Company specialized in Pre-cast and Pre-stressed concrete).
Technical Office Engineer in e.construct Branch in EGYPT.

PROJECT: Pre-cast Concrete Cladding for Marina Height Towers (220 meter height towers in Dubai).
DUTIES:
-Engineering work for Pre-cast Concrete Cladding Panels.
-Preparation, Review and Issue the Formwork and Reinforcement Workshop drawings using AutoCAD program.
-Preparation, review and issue Bill of Quantities (B.O.Q.).

December. 2000 to January. 2004, " E.D.F. Electricité de France
( International French Company ), ( The Owner ) "
Technical Office/Q.S. Engineer in "Suez Gulf gas - fuel fired power plant 782 MW, 330 Million Dollar (During Construction, Commissioning and Warranty period).

DUTIES:

-Engineering work for Steel structures in the Boiler Units, Turbine Hall Building, Electrical & Pipe Racks and Steel access Platforms.
-Preparing Steel Workshop Drawings Using AutoCAD program.
-Review Erection drawings for Steel Structures.
-Preparation, review and issue Bill of Quantities (B.O.Q. list) for Steel Drawings.
-Solving Technical problems on site asked by the Contractors by "Request For Information's" (R.F.I's) or "Non Conformance Records" (N.C.R.'s).
-Preparing Concrete Formwork and Reinforcement Workshop drawings.
-Review construction drawings.
-Preparation, review and issue Bill of Quantities (B.O.Q.) for Concrete Drawings.
-Geometry, Leveling and Coordinates of location for internal & external access roads.
-Update the Under Ground Network & Standards.
-Work Using PDMS program to make the 3D model for the Guide Drawings for Buildings.
-Making Download, Printing and Filing for all the project drawings and documents received by Email.

August, 2000 to November 2000, KAHROMIKA – Egyptian company
Technical Office Engineer in BENI-SUEF Cement Plant.

DUTIES:

-Engineering work for Clinker Grinding Steel structures.
-Preparing Steel Workshop drawings using AutoCAD program for:
* Main Columns.
* Main Girders.
* Floor Beams.

November 1999 to July 2000, OSMAN GROUP – Egyptian Company
Technical Office Engineer in Dream Land Project – Villa Apartment.

DUTIES:

-Preparation and Review the Workshop drawings for Concrete dimensions, Reinforcement, Brick work, Wet finishing and As Built using AutoCAD program.

August 1996 – July 1997, ARAB CONTRACTORS (Egyptian Company)- Consulting Engineering and Technical Services (CETS).
Assistant for Quality Department Manager during preparation for ISO 9001 Certificate.

DUTIES:

-Preparation for ISO 9001 documents for all departments.
-Preparing Official Forms to arrange work between the different departments.
-Supervise and Check that all the departments are work according to the ISO documents issued from the Quality department.
-Update the ISO documents according to any changes in the Quality system in each department.
-Filling for all documents of ISO system.

August 1997, ARAB CONTRACTORS – Egyptian Company
Trained as Site Engineer In the project of EL-Mouneeb Bridge.

July 1995, ARAB CONTRACTORS – Egyptian Company
Trained as Site Engineer In the project of Helwan University.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 8001 to 8050 of 15512)

Go to Search Parameters...

Brief Description

Automotive and Locomotive Mechanic - Knowledgable and Reliable

Free! Program Director Construction Large Projects SE Asia Hotel, Embassy, High Rise, Medical, Retail, Data Facilities, Power, Roads, MEP Thailand Vietnam Korea Philippines

HR Generalist with 14 years of experience

14 years of experience in managing all phases of Operations, including purchasing, inventory control, transportation, budget preparation and execution, staff development and regulatory compliance. Experience held in manufacturing, Oil/Gas, transportation and chemical industries.

-Primavera (Deep knowledge and experience) / SAFRAN planning program / AutoCAD 2-D (Professional use) /

Proactive HSE expert with 13+ years expertise encompassing HSE in Oil and Gas Construction; accustomed to project Management and coordinating resources effectively to achieve targets within often stringent constraints. Energetic, dynamic, relishes challenges and demonstrates indepth analytical Skill

19 yrs. experience in the construction industry as a foreman/heavy equipment operator/mason Extensive training to accurately and safely operate heavy equipment First Aid and CPR Certified

Working as a Sales engineer in a well established LLC. It’s a 20 years old company which deals with Instrumentation, Automation, Compressors, Air Operated Pumps, Valve Automation, Pneumatic Tools, Transmission Products and Material handling.

HSE, Risk Assessment & Loss Prevention Engineering in Oil & Gas Field

I had a diploma of INTERNATIONAL WELDING ENGINEER in central metallurgical researches and development institute under certification of IIW (international institute of welding). Certificate no IWE AT 0708.. I worked in EMEC as a Drilling fluid Engineer in syria from 3/2009 till now.

BE Mechanical, Good surveying and project management skills, Sales and Marketing

My unique mix of previous work experience combined with my completion of the Associate of Applied Science Degree in Process Technology makes me an ideal candidate for employment with your company.

10 years experience with crane, lifting and rigging. certified in all aspects. looking for a professional company with potential for advancement

I have a keen interest in science and its application towards solving problems. I am a creative individual who takes initiative when the situation calls for it. I am very determined and believe in completing what I start, from the planning phase, to the design phase and ultimately the implementation

Field Tech Mechanic

I'm 31 years old working as a condition monitoring engineer in Badr Petroleum Company joint venture with SHELL company where my nature of job is to manage and develope predective maintenance programme for rotating machinery through vibration analysis, lube oil analysis and thermography

I am a young professional with BSc Geological Sciences degree, working for exploration company in the position of GIS Intern. I'm self motivated and always in the position to be taught and I'm very fast to understand the need and applications that may be required by any employer.

I am a petroleum engineer from UT-Austin. I want to go offshore for my first full time job. I enjoy being in the field over the office. I will be up to any task that is required.

Geophysicist, Information technology & Communication, Network Engineer, System Administrator, Hardware & Software developer

Key responsibility of Marketing and selling our Products like ATC, Auto Loader, Chillers & Coolers, Hypoid Motors, Telescopic Covers, Rotary Tables, Spindles for south India Region.

I have over ten years experience in the building and facility maintenance and management. I hired and trained technicians for HVACs; Carpentry, Plumbing, Electrical, Appliance Repairs and Mechanical. I graduated from vocational high in Air-Conditioning and Refrigeration.

Working at SUI FIELD GAS COMPRESSOR STATION (SFGCS), having daily throughput of 600 MMSCFD

Graduate Mechanical Engineer with ASNT level-2 NDT and CNC part programming .

Hands of experience with good knowledge of engineering (standards) & trouble shootings working with one of the major such as Qatar Gas, other than working with petro power plant, oil/gas industry & Heavy metal industry

To work in a challenging and stimulating environment envisaging personal growth and career development by associating with an organization, which provides an ambience for learning and growth, where my problem solving talents and designing skills can be utilized.

Panel operator with over 10 years experience in gas receiving facilities, looking for overseas experience

Senior Drilling Engineer & Supervisor

Maintenance, Repair, Overhauling of static and rotating equipments, turbo machineries in Petrochemical plants (Turbines, Centrifugal and reciprocating compressors, Diesel engines, Pumps, Strippers, Distillation Columns etc), Safety permits, Shut down works, etc.

WELDING INSPECTOR CERTIFIED WITH B.E MECHANICAL

Bachelor of science degree holder with skills in mineral exploration

am energetic agrresive,have interpersonal skills good communication skills,profficient in microsoft suites and a bsc degree

2 yrs exp in piping engg and pdms ,mechanical engineer

.Bacholar Degree In Chemical Engineering. Two Year Experience As Drilling Fluid Engineer.

Document controller, 2-year experience with the largest private master developer in the UAE

B.E.S (Equivalent to Master) Environmental Sciences

Plate welder (SMAW,FCAW,GTAW)

Bsc Environmental Health, certificate in advanced project management,2years experience in the field of environment, computer literate

Mechanical, Fitter, Basic Welder and Electrical

8 years comprehensive experience as a Senior Condition Monitoring Technician in Oil & Gas / Petrochemical / Fertilizer Industries in Middle East, like RasGas LNG Company Limited Qatar, Kuwait Oil Company (K.O.C), Kuwait, Fertilizers and Chemicals Travancore LTD (FACT) Cochin, Petrochemicals etc.

Eleven years of hands-on experience and proficiency with Autocad Architectural Desktop, including version 2008

Exploration geologist with two years of experience in the uranium exploration field.

Qualified Civil Engineer (BE Hons) having Experience in Excecution, Planning, Billing, Monitoring. Currently working with GMR (Badrinath) Energy Ltd.as an Executive -Civil (site) on a 300 MW Hydro Power Generation Project

Ship Design Engineer - Piping & Machinery

welder

Having qualified as a construction plant Fitter (heavy diesel Mechanic) in October 2000, I joined the Caterpillar Dealer for Ireland, McCormick MacNaughton. I started my employment as a Fitter in the workshop for two years. Then I got promoted as a Field Service Engineer in January 2003.

Independent Professional Landman with 8 years of experience in running title, lease acquistion, due diligence, curative, surface damages, ROW and easements , permits and environmental issues with Federal and State regulatory agencies, including Phase 1,2 and 3 ESA and remediation.

Eight years of experience in Oil and Gas industry and Stimulation positions with experience in drilling, tools, and cementing. Strengths include knowledge with all Frac fluid systems, frac equipment, stimulation techniques, coordinating, and teamwork.

BE IN MECHANICAL ENGINEER. I HAVE 2 YEARS EXPERIENCE IN STRUCTURAL STEEL ERECTION

Strong backgroun in all asspects of Integrated Petrophysics from data acquisition and qyality check, Open and Cased Hole formation evaluation and reservoir monitoring, formation pressure analysis, to petrophysical parameters and Core Analysis skills.

Three year working experince in field of hydrogeology and hydrochemistry.

First Prev 151 152 153 154 155 156 157 158 159 160 [ 161 ] 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 Next Last

Seach Parameters


Goto Advanced Search...
Keywords: (e.g. mining engineer)		Find results with:

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out