Resume - Well experienced Technician having an extensive experience in the maintenance an...

Misco Jobs

Resume #77952

CONTACT INFORMATION:
View contact information...

HVAC –R TECHNICIAN

Age: 30 years

OBJECTIVE

Well experienced Technician having an extensive experience in the maintenance and troubleshooting of various HVAC and Refrigeration Installation, seeking for a motivating position related to maintenance, construction and commissioning Processes

EDUCATION
1996-1999 Professional Training Institute OUARGLA

HVAC and Industrial Refrigeration Graduation.
State Technician Diploma

WORK EXPERIENCE

2001-2009 HVAC – REFRIGERATION Technician
Groupement Berkine Sonatrach-Anadarko Petroleum Inc, Algeria.
[US-Algerian Joint Venture Oil Company. 320.000 BOPD Crude Production Plant]

 Refrigeration analysis and Electrical trouble shooting of very wide range of HVAC – Refrigeration installations including, DX Air Handling Units, Air Cooled Condensing Units, Roof Top Units, Water chillers, Fan Coils, Negative and positive Cold Rooms and individual Heat pump Air Conditioners.
 Reading of Electrical and PID Diagram as basis for advanced diagnosis process for efficient and swift troubleshooting.
 Familiar with PLC Control systems such as Danfoss Rack NC25 Controller, Honeywell Proportional Controller and Johnson Controls.
 Electrical repairs on control and power loops of the installation: breakers, safety and control switches, temperature control devices and relays.
 Mechanical repairs including: overhauling of semi hermetic reciprocating compressors which involves replacement of flap valve plates, pitman's, shafts, valves. Same for Exhaust Fans and forward Curved Centrifugal Fans of Air handling Systems.
 Extensive experience with Air Distribution Systems: ductwork balancing, airflow adjustments and control, noise and vibration control.
 Conduct Preventive Maintenance Schedules basing on Computerized Maintenance Management System.
 Familiar with Work Orders, Work Permit procedures and High HSE practice on Oil Production Sites.

SKILLS

Skills
CMMS [DataStream MP-7i]
MS OFFICE, INTERNET, INTRANET

Languages
Arabic Native
English Good
French Good

BRANDED EQUIPMENT EXPERTISE
Air Handling Units and Air Cooled Condensing systems: Carrier, Trane.
Heat Pump Water Chillers and Roof Tops: Climaveneta (Délonghi group)
Refrigeration systems: Williams, Copeland, Friga Bohn, ECO.
Individual Split systems: Trane, Rhoss, Daikin, Fujitsu.
Controls: Danfoss, Honeywell, Johnson Controls

REFERENCES AND RECOMMENDATIONS ARE AVAILABLE UPON REQUEST.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 9701 to 9750 of 15498)

Go to Search Parameters...

Brief Description

I am working with Barrick Gold Corporation, the biggest gold mining company in the world. It is a Canadian company having 4 gold mines in my country. I work in one of the mines as a Mine Safety & Training Officer. I am looking for the job in the gas/petroleum company.

An international, multi-lingual, technically proficient Sales & Marketing professional

I wish to apply for the post of Supervisor Warehouse /Material Specialist or (Buyer) Procurement.

I have 28 years experience in finance, project control, scheduling and material control working on DoD projects and private sector manufacturing companies in and out of the U.S.

Position as Electro-Mechanical Designer. Open to full-time regular employment or long-term contract arrangement. Extensive experience on CADAM, CADRA and CatiaV4. Also experience with CADEX-CCD and AutoCAD 3-D Solid Modeling. Over 25 years experience.

Senior Instrumentation technical. Diploma in electronics.

I have approximately 12 years experience in oil & gas industry. I am presently considering a position change with a company offering greater responsibility and more career advancement opportunity.

Microsoft project, scheduling, budgeting, estimating, superintendent background

Construction Manager - Worked as Architect, Interior Designer and Civil Engineer

More than three years of industry experience including asset evaluation, reservoir simulation, annual reserve reporting, long term depletion strategy, enhanced recovery evaluations, expert witness testimony, economic evaluation and forecasting.

Application for the Post of Structural Designer/Project Engineer for building structures in your esteemed Company or for any position applicable to my qualifications.

Wastewater treatment, waste management, EIA

To carve a niche for myself in the organization I work for, and prove my abilities, in terms of strong work ethics, to give an advantage to the organization and as extra edge to my career.

Russian/English/French speaking SAP materials controller.

Iam a diploma holder in Mechanical engineering with knowledge in autocad, Pro-e. Working as supervisor , engaged in fabrication & erection of pipelines.

M.Tech (HSE), B.Tech (Safety and Fire Engineering) specialized in oil and gas sector

Petroleum Engineer

I am Technician of all types electrical switchgear panels.

I am seeking for a job in Gulf contries especially community development field, and I have more than 3 years of experience in the community based water supply projects

onshore & offshore "jack up " Drilling supervisor /foreman

A Team Leader,Conveyor Attendant, Operator/Mechanical Technician, Responsible for Flow wrapping machines/Nordenmatic 400 for the production of Tooth Paste. Also responsible for raw material delivery using a valve system in a control room. Mechanical Engineering Technician lll certificate holder.

Training and Supervision of Technicians, Quality Control, Sudying Chemical Engineering - Dipolma level, Soil, Asphalt and Concrete Testing (Lab and Field)

Certified Project Management Professional (PMP from PMI, USA) has extensive experience in technical, commercial and quality management aspects of the construction projects.

Diploma of associate engineer

Negotiating oil and gas leases, joint venture, farmouts, operating agreements, Runsheets, Ownership Reports and other exploration related contracts. Communicating with company staff landmen, mineral owners, and other personnel on an ongoing basis to benefit the company's oil and gas exploration

HND in Petroleum engineering plus 5 years offshore experience

Diploma Civil Engineering

Manejo de micro-computadores y Estaciones de Trabajo. Manejo de Software Básico: Ambiente Windows, Paquete de Office, Internet Explorer. Programas: MESA, PICKIW. Dominio de Español, inglés (Básico).

Welding Inspector/ Qa Qc Inspector

I am a professionally registered mining engineer with 13 years experience in the mining industry. My strengths are leading miners and engineers, developing and executing mining and construction plans, excellent presentation skills, and the ability to make decisions under pressure.

roofbolter 3rd shift single boom or double scoopman-ram car can tram miner -section utility- belt crew belt-power moves

Designer,Planner,Production/Engineering mainternance personeel,Commercial Engineer

I am working for GE Nuovo Pignone as contractor mechanical engineer since 8 years. I have an excellent acknowledge of the Gas Turbine and other rotating equipments as centrifugal compressor and pumps.

Well experienced Technician having an extensive experience in the maintenance and troubleshooting of various HVAC and Refrigeration Installation, seeking for a motivating position related to maintenance, construction and commissioning Processes

Petroleum Landman Seeks Work at Home from Images

Certificate III and IV Mining Exploration/Geoscience + 2 years experience

6 years experience on administration with a comprehensive knowledge of clerical experience, reports, database, and onshore work-over rig materials with expertise in maintenance of oil rig materials.

AutoCAD Operator

BE( Elect & Instrumentation) / Diploma In Industrial Safety / Diploma In (Elec & comm) with 2.5 yrs of Exp In Steel Plant

material co ordinator/motorman

Worked in all phases of the industrial plants. In commisioning, start up and debotlenecking. As a process engineer, with experiencie in process, production, facilities and process control systems. Supervised group of 12 people, implement ISO 9000/1400, Osha 18000, economic evaluations and management

Have a progressive and responsible working experience of eight (8) years dedicated in field of piping engineering, design and drafting. Directly involved in a variety of oil & gas, petrochemical, refinery, and mining projects which starts from Estimation, Front End Engineering Design (FEED),

I have a degree in Mechanical Engineering and a Post Graduate Diploma in Business Studies. I have attainded courses in Health Safety & Environment , Sales/Princples & Strategies etc. I have also worked as a Sales Engineer and Area Sales Engineer respectively. Proficent in use of micro soft office

I was graduated in Bachelor of Science in Mechanical Engineering and my work experiences was in the field of QA/QC in construction of district cooling plant with two years in refinery construction and currently working as a Mechanical Inspector in a consulting firm.

Journeyman I & E Technician: Plant-wide installation, start-up, loop check, calibration, troubleshooting, repair, and maintenance of instrumentation and electrical systems on high pressure gas-fired boilers (produce 250lb. & 900lb. steam flow), turbo-blowers, and water-treatment facilities.

Mr. Papanna has more than 5 years diversified engineering experience in the process, petrochemical and power industries. These duties included developing specifications and requisitioning equipment, performing technical evaluations and making recommendations for purchase, and specifying all testing

Experienced business professional specializing in the development, engagement and closure of long term service business opportunities. Key strengths include strong strategic thinker, planner, managing complex infrastructure bids, managing multi-disciplinary, cross-cultural virtual teams

•Awarded department fellowship to pursue graduate studies. •Secured fourth place in undergraduate engineering. •Skilled in working with IMEX (CMG's reservoir simulator) and E100 (Eclipse simulator). •Received four promotions in a span of three years. •Prepared pipelay/installation reports

I am a geoscientist with a strong technical background with seismic processing, interpretation and analysis experience. Also experienced in shallow geophysics, field sampling, and monitor well installation for environmental projects.

5 Years of SAP Experience in Enterprise Planning, Corporate Strategy Management, Supply Chain Metrics, Data Warehousing (SAP NW – BW, BI), Strategic Enterprise Management (SEM) and Integrated Planning (IP) on NW 7.0 (2004S) & Enterprise Planning on NW07 platform , spanning industries like Oil & Gas

First Prev 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 [ 195 ] 196 197 198 199 200 Next Last

Seach Parameters


Goto Advanced Search...
Keywords: (e.g. mining engineer)		Find results with:

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out