Resume - Drilling Engineer with 4 years experience ,working for a leading Exploration and...

Misco Jobs

Resume #77960

CONTACT INFORMATION:
View contact information...

Education:
2003-2004 MSc Drilling and Well Engineering The Robert Gordon University, UK
1995-1999 BEng Mechanical (Distinction) Bangalore University, India

Professional Experience:

Feb 2008- to present Eni Congo Drilling & Completion Engineer

M'boundi Onshore Field, Congo
* Responsible for planning and executing well designs and workover programmes for producer and water injection wells.
* Working along with geologists, production and service company personnel to ensure efficient operations.Identify and implement new technologies to improve drilling performances.
* Cost estimating and Cost control using SUN e-SPACE and Navigation Manager.
* Monitor follow all phases of the daily drilling and completion operations, perform post-analyses for benchmarking, problem solving and learning.

Feb 2006- Feb 2008 Eni S.p.A, Milan, Italy Drilling & Completion Engineer

Kazakhstan Projects:
Feasibility Study of Intelligent Completions in the Kashagan Field-AGIP KCO
* Evaluated the possibility of using Intelligent Completions limited by well construction.
* Carried out detailed analysis to optimize well designs and proposed conceptual solutions which would allow AGIP KCO to make a decision on second phase of the study.
Decommissioning Study-Karachaganak (KPO-Kazakhstan)
* Evaluation of overall procedure, time and associated costs to execute permanent abandonment of wells which is part of the larger study "Cost Estimate Study for Well Plug & Abandonment and Facilities Decommissioning-KPO "
* Annual re-evaluation of Decommissioning costs and times for 329 wells for 2006 along with technical description. Recommended changes in some aspects to achieve technical objectives in safe and efficient manner.
Technical support/ follow-up
* Kalamkas Project Technical follow-up.
* Provide technical assistance and monitoring of daily drilling activities of wells in the Kashagan Field using Genesis Suite.
* Carried studies to solve recurring problems(wellbore stability, lost circulation, washouts etc)

Croatian Projects:
* Part of a team for Technical evaluation and Drilling & Completion studies for Assurance Review-2 in the OPDS Cycle for Ana-Vesna and Irina Fields.
* Prepared budget and time break down for wells to be drilled according to Eni Company procedures.
* Decommissioning study for Croatian fields-2006 and 2007
* Annamaria and IKA C Field Development Project and Rig Tendering evaluation

Jan 2005 - Jan 2006 Abalt Solutions Ltd, Aberdeen, UK Production Technologist

* Field Evaluation of Western Siberian Fields for TPOC –Moscow, Russia.
* Sonatrac-Algiers,Algeria: Developed and delivered 3 weeks training in basics of Production Technology
* Worked at the Shell Petroleum Development Company (SPDC)-Warri, Nigeria as Training Consultant.
Key Responsibilities:
* Developed & Engineered training /lectures for 126 hours in Well Surveillances and Production Technology for Shell Intensive Training Program (Feb-May 2005).
* Co-ordinated 2 weeks of field training/practical hands on experience with Schlumberger Dowel and Geoservices Ltd, Port Harcourt, Nigeria for trainees.

April 2004-Nov 2004 Abalt Solutions Ltd, Aberdeen, UK MSc Thesis

"An Integrated approach to Well Completion Design in Mature Fields"
* Address proper requirements for applied technology & improve operating practises, ensure recovery factor is maximised and production plateau is extended by the engineering study.
* Validating Completion Design Options in the Al-Huwaisah Field, Oman for Shell/PDO.
* Developed risk assessment and trade-off tools for ease of operation/decision making.

2000-2003 General Electric Transportation Systems, Bangalore, India
Design Engineer-Mechanical

* Responsible for planning, design, analysis and modulation of Mechanical Railroad products and Way side Structures/Cantilevers.
* Part of a team that executed Engineering Change Requests recognizing immediate business needs and delivered to customer expectations-Annual savings of $150,000.
* Developed project management skills by independently identifying issues on existing products and formulated reverse engineering solutions for Product Line-Cab Signal Discriminators- Savings= 840k/year.Labour hrs savings=14400 engineering hours per year.

2002-April-June General Electric Transportation Systems, Warrensburg, MO, USA
Design Engineer-Mechanical

* Carried out structural analysis, failure Investigation of Ge Product Line-Bungalows generating revenue approx $30,000/bungalow.Acquired training and gained on-site Manufacturing plant experience.

Professional Training:
* APT Fire Fighting and Survival at Sea training at Pavia, Italy
* Competence in Landmark Software-Well Plan Drilling, Compass, Well Cat, Casing seat and Stress Check
* Genesis software for Drilling Management.
* Peloton Wellview
* Experienced in 3-D CAD Packages: Solid works, Unigraphics-V16, AutoCAD, Micro station, e-commerce and MS Office Tools.
* Quality: Trained in Six Sigma Quality standards-DMAIC and DFSS. Received Green Belt (GB) "Six Sigma" Certification for setting high Quality standards in projects at Ge Transportation Systems.

Workshops:
* HPHT Wells Summit 2007, Aberdeen, UK

Other Information:
* Part of the ELP-Emerging Leaders Programme conducted by the SPE.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 5001 to 5050 of 15508)

Go to Search Parameters...

Brief Description

34 Years of Inland and Offshore Inspection and Project Co-Odination

Fourteen years experience in E&P oil industry. Good knowledge in drilling and production engineering. Extensive experience in well engineering operations in Completion, clean-up, DST, Stimulation, Coil-tubing, Logging, Well survey etc. Good skill in planning, organizing, communicating, interpersonal

An experienced Offshore Procurement Lead

14+ years of experiance in Engineering,Design Engineering specialising in Instrumentation field.

A challenging opportunity in the management, engineering or sales field

Process Instrument & Control and Analytical Insrument Specialist

I have over 20 years experience in all aspects of electrical work i.e. construction, testing and inspection and commissioning at home and abroad, both onshore and offshore.

Accountant with experience in the mining industry providing management information to business unit managers, "Site Manager" and Head Office. Responsibility includes budgeting from volumes to be mined up to the Balance Sheet, P&L and Cashflow.

Highly dedicated senior manager with extensive knowledge of Project Management, Construction Management, RF Design, and Site Acquisition.

Reliability Engineer

I am a competent human resources specilist with more than five years experience and possess BSc Human Resource Development

MV switchgear Panel Design Engineer

A good team player with proven communication skills and ability to Motivate People, drive changes and strive for continual Improvement; Excellent People Management and Interpersonal Skills.

Safety supervisor. i have 12 years experience in fertilizer, petrochemical and oil and gas construction company

Scaffolding engineer Certified from CITB UK.

I have been working in Kingdom of Saudi Arabia FOR 18 years as grader operator. And now i want to work in Canada as grader operator.

API-510 / AWS-CWI

graduate from Algerian Petroleum Institute,Petrochemistry Refining, nine years in a Gas Treating Plant." Hudson and Pritchard process", Glycol Regeneration and injection, compressors, Turbo-expander, DCS control system Columns, Heat Exchangers, Heater, Separators Turbine MS5002,pumps

I have a M.S. in Petroleum Engineering with emphasis in flow assurance issues. Through my experience I have gain great communication and technical writing skills. Also been in a project has gave me the ability to work well both in teams and individually.

Piping designer, Pipe stress engineer

Mechanical Engineer (Piping- Lyout/PDS)

I have over five years in the environmental consulting field, specializing in drinking water and wastewater. I am currently working part-time while I pursue a M.Sc. in Water Resources Engineering at the University of Guelph in Guelph, Ontario.

Working as a instrument technician in al- jubail petrochemical plant saudi arabia. involve in on line instrument and maintenace in low low density poly ehthelene plant(LLDPE) AND (LDPE) low density poly etheylene plabnmt.good knowlawdge of all type honey well ,yokogawa,foxboro and rosemount fisher

Offshore Survey Client Rep / Project Surveyor / Party Chief

My research and education background makes me uniquely qualified in the areas of computer science and the Geosciences. This background makes me ideally suited in an environment that integrates the above mentioned specialities.

Mechanical Engineer 22 years experience design, projects

Designer/Drafter with Inventor experience.

Thorough technical/commercial knowledge and long experience on design, fabrication and sale of process equipment for oil/gas and energy industries

Geology & Mining Engineering Degrees; Underground and Surface Experience; Professional Geologist; Qualified Person after NI 43-101; Vulcan, Minesight, Gemcom Experience

Administrator of companies, client service, 8 years expirience in retails busines.

MOSCOW based all around professional with a solid track record in defining and executing project managements.

I am a Certified PeopleSoft Technology Consultant and a Certified PeopleSoft Installer and have worked as a PeopleSoft Systems Administrator for 7 years. I have implemented/upgraded Student Admin, Portal, HRMS and Fin. PeopleSoft systems on various platforms and can implement on any platform.

I am an mechanical Engineer , having 7 years of experience in water and wastewater industry.

Field Landman, with experience in running title, reporting and land owner ship leasing. Interest include Alternative Energy

M.B.A , Annamalai University. 2006

Driller/Directional Driller experience, looking for either, and will travel anywhere.

I have experience in Pre and Post Contract in Construction

I am primarily seeking opportunities within the Oil and Gas Industry in the following areas: Training and Competency Assurance, Project Management, and Business Development

instrument supervisor libiya.

Drilling Engineer with 4 years experience ,working for a leading Exploration and Production Operator.• Responsible for planning and executing well designs and workover programmes for producer and water injection wells.• Monitor follow all phases of the daily drilling and completion operations, perfo

maintenance foreman /chief electrician

Almost seven (7) years of extensive professional experience in shop fabrication and construction involving Quality Assurance / Quality Control inspection, documentation and related activities of various steel structures and welding of marine construction industries.

i am project manager assistant in pressure vessel and road tanks,cylider and on/offsure projects in industrial inspection company

INSTRUMENTATION & CONTROLS ENGINEER with proven leadership skills, vast experience in the petrochemical and oil & gas industry. Worked for Technip, Tractebel, PDIL, GS E&C in india and aboard.

working as intrument and control technician in Total oil and gas platform Abu dhabi . Involved mainly in Trouble shooting and commissioning activities.

HSE Manager NEBOSH, IOSH, HND's

A competent and qualified Mechanical Engineer with over 20 years experience in functional areas of Project Management, Strategic Management, Mechanical Maintenance, Process Engineering, refurbishment, as well as other allied operations. Presently associated with Saudi Arabia Basic Industries Corpora

M.sc in Applied Geology with M. Tech In Petroleum Exploration and working with one of the most successful exploration company in India.

A position as a Computer Web Designing / Software Programming / Hardware & Networking / Data Entry / Documentation for a company concerned about the integration and design of their operational network.

Thirteen years of experience in the field of project management, feasibility Studies, front end engineering, conceptual design, Project proposals, detail design, flexibility Analysis, procurement assistance in piping/pipeline design.

First Prev [ 101 ] 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 Next Last

Seach Parameters


Goto Advanced Search...
Keywords: (e.g. mining engineer)		Find results with:

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out