Resume - Marine engineer with all training necessary and green card

Misco Jobs

Resume #77964

CONTACT INFORMATION:
View contact information...

Date and place of birth: 04/05/1979 Carini (PA) Nationality: Italian

Vocational Training:
1998 nautical graduates gotten from the National institute" Gioeni Trabia" of Palermo as expert for the apparatuses and maritime technical fittingness, aspirant to the direction of engines on merchant ships.

COMPETENCES

Seamen Book n' 58749 released the 13/02/95 Compartment of Palermo Brevet of Italian PSCRB (Proficiency in Survival Craft and Rescue Boats).
Familiarization on Chemical Ships. Course sustained on board of the ship" Crystal Rubino" belonging to the Company of navigation Finbeta, with examination written datated and approved by the Command (annotated on the book of navigation) based on the learning of the processes of load and unloading of toxic chemical liquid substances and not, on the treatment of the stripping, cleaning and washing of tanks under bad wheatear conditions.
Course of S.T.C.W. sustained on one of the ships of the Navigation company" SIREMAR" having for object the basic knowledgement of the places, of the functionality and employments of the tools of edge also the in case of emergency. Course of familiarization of engines rooms (in proper way specific location and the ability of all the apparatuses engines locations). Basic and advanced fire fighting course sustained in the training center DI M.A.R.C.A.
Course of survival and rescue.
Employee's course to personal computer and use of computer applications (Word Processor, Database, Internet connection, Excel: etc.).
Qualified in conformity with the dispositions of the rule VI/l of the attached one to the international convention IMO STCW' 95 and of the section A/VI/1 I paragraph 2.1.4 burdens tails STCW - (personal safety and social responsibility),
Driving licence for motorcycles (unlimited) released on 13/04/2002.
Attainment of certified of competence in subject of first AID whose examinations have been taken to the I.P.S.E.M.A. to Palermo 10/07/2002.
Attainment of the course of specialization for examinations n°IF200060536 type PERF for" mantled maintained and Installing Of Gas Methane boiler" released in dates 03/10/02.
Examinations and patent attainment of qualification to the command of recreation unity within the 12 miles from the coast released 6/12/2002.
Attainment professional title as aspirant engines captain sustained from the Maritime Direction of CAGLIARI and released the 12/03/2003(certificate IMOs n' 03/03 sent forth the 18/03/2003 registers 58749/I ^).
Certified of competence gotten on board of belonging ships to the Carnival cruise lines: Hospitality communication skills, crisis management and human behaviour corse, crowd management corse, English language evaluation. Tier 2 and tier 3-(basic and advanced environmental training) completed on 5/25/2004
Known languages: first language Italian, Written and spoken English very well Spanish well and medium (understanding) franc.
M.C.A.
-BASIC AND ADVANCED FIREFIGHTING TRAINING COURSE
(TARANTO PASSED ON 21/07/2007)
-PROFIENCY IN SURVIVAL CRACT AND RESCUE BOAT"PSCRB"
(SOUTHAMPTON PASSES ON 19 OCTOBER 2007)

EXPERIENCES:

1995 signed on C/mmare del gulfo the 19 lug. With the rank of wiper M/N Princess and signed off in C/mare Del gulf for end of contract on 20 lug. 1995
1997 SIREMAR Spa." on the ship" F.LIPPI" stopped in the Shipyards in Palermo from 01/07/1998 to 01/08/1998, in such circumstance the I learned the exact location of the various apparatuses in the engine room the frame of the M/P, his/her electric connections (termocoppie) to the action of the assemblage and dismantled for the monitor zing pads of bench and good person knowledge and use of the" Kit" used in the electric shop and mechanics;

1998" TIRRENIA Spa." connections and public transport among Civitavecchia - Cagliari on the ship" CARALIS" with the qualification of Nautical Student as stage, from 18/02/1998 to 27/02/1998;

1998/99 navigations the Society" SIREMAR spa." connections and public transport with the Islands Egadi, Eolie, Pelages and Island of Pantelleria, with the qualification of engine cadet as course (special learning and working contract) from 10/10/1998 to 17/04/1999.
1999 calls to the weapons in Marine, in particular the Military ship" G.Garibaldi"come engine-technical (learning of the operation of the motors diesel four stroke V 18 supercharged cylinders and on the operation of the gas turbine;
99/2000 signed on with the company" FINBETA" connections and transport commodities (Isopropanolo, mec, styrene, exxol, zeta-hex 02, isopr,lrsol, ethanol, acetate, toluene metil-propilene) out district climbs: Rotterdam, Antwerp, Hamburg, Cotca, Rauma, Latvia, Hull, Norway and Denmark, with qualification of engine cadet on the ship" Kristal Rubino" from 1/11/1999 to 17/02/2000; In such contract I learned the principles of operation of an automated steam boiler techniques and ability, processes of distillation (fresh water generator), knowledge of the circuits of cooling water of the motors (l.T - H.T.) oil, diesel,fuel and compressed air, electrical system and idraulic too.

2000 navigations Society" SIREMAR Spa. connections and public transport with the Islands Egadi on ship" S.Martini" Khan has qualified of engine cadet since 01/07/2000 to 30/09/2000. In this contract I learned difference between the white waters - black, sledges, oily, of bilge, oil dirty and clean procedures of filtration, of settling and purification {maintenance valves and pumps of various kind, injectors, filters etc.);

2001 navigations in the Society" ELBANA Of NA VIGAZIONE ship M/c" Cliff" with qualification of engine cadet from 06/03/2001 to 17/03/2001;
signed on with the Society" STARGAS" on ship M/c" DIAMOND Star" with rank of engine cadet from 10/07/2001 10/08/2001;
Navigation with the Society" LLOYD Sardinia" on ship" RO RO / denominated" Gulf of the Sun" with the rank of wiper from 09/11/2001 until 28/12/2001.
2003 signed on April 10 2003 on the Carnival Spirit(CARNIVAL CRUISE LINES)with the rank of engine cadet and disembarked on August 13 for then to embark again in October 12 2003 on carnival PRIDE(same class of ship) and disembark" with the same rank on February first 2004. Really meaningful working experiences for the type of ship as maximum model of naval automation in the world a really high level professional duty on the propulsion electrical ships. My rank was 3° engine officer.
2004 embarked with the rank of 3' engineer on the Carnival Destiny on May 23 and signed off with the same rank on August 29.
2005Signed on the Carnival Conquest on November 21 and signed off on January 30 with the rank of 3' engineer (galley engineer) we went in Porto rico, le Barbados Jamaica etc etc
Signed off on January 30 from Carnival Conquest with the rank of 3'engineer
Signed on with the rank of 3' engine officer on the Carnival Elation on June 5 and disembarked with the same rank on November 25. Visited places: Caribbean (Cozumel, progresso, calica, key west, etc) Mexico, Louisiana.
Signed on with the rank of 3' engine officer on Carnival Ecstasy on January 25 and disembarked with the same rank on June 26 effected in this matter we went in wet dock in Louisiana (New Orleans) and dry dock Alabama (Mobile) in order to carry (bring) back the ship in normal operation (cruising), departing from Galveston (Texas).doing caraibi, messico.
Signed on to private catamaran in the Magdalena 14 Augusts for disembark on September 6 (I completed all necessary period to achieve patent (license) unlimited chief engineer license.
2006 sign on board m/vessel athara(tirrenia) on23 December and I signed off on January 25
Sign on Grand princess on dec.6 and disembark on March 9 with the rank of 2' engineer.
Sign on board of Artemis p&o with the rank of senior 2' engineer means 1 engineer for co wealth translation until august 17.
For the moment I'm in the shipyard (Istanbul) proteksan as 1 engineer for a new ship building (Leo fun) 55 meters.

Palermo.. .....

P.S with the present one I intend to get an appropriate job, in addition I authorize treatment of my personal data in compliance to the law in vigour.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1901 to 1950 of 15349)

Go to Search Parameters...

Brief Description

Oil & Gas Landman

23 Years hands on construction/on site experience.MDP Project Management, Employed by EPCM company for 14 years prior to retrenchment, then focussed my attention on positions abroad.

Results-driven project and program management professional with first-rate skills in directing full cycles for complex, multi-site programs and initiatives. Proven ability to deliver substantial revenue, productivity, and quality improvements through well-managed, on-time projects.Particulary strong

28 years experience in ug/ hard rock and coal. Hard Rock: Alimak, Drift (rubber and rail), all types of stoping methods, and equipment operator of 1,1/4yd to 9yd loaders all brands, over shot rail muckers from 12b to 25 , jumbo drills single and double boom. Coal: Fletcher bolter and long wall

30 plus years experience with heavy equipment both as an operator and supervisor.

Procurement & Contracts Expertise

Marine engineer with all training necessary and green card

National Diploma in Chemistry and 28 Years experience in Laboratory work and management.

8 years of experience as MBBS doctor with additional skills in administration, project management, liasoning, coordination, HR management, quality monitoring, emergency health care, Trainings, Lecturing, critical reviewing and remote place health services.

20 years signalling experience with IRSE licenses and Signal Maintainer certificate. SPONSORSHIP PREFERED.

Environmental Management include the preparation of complete EIA report for various industries in relevant to sustainable use of resources / quality health safety environmental management / various water treatment components. Qualification - M.Sc. in Enviornmental Science.

PETROLEUM GEOLOGIST with experience in exploration, development, acquisitions, divestitures, and operations. Experienced in clastic, carbonate and salt environments. Available to travel for either permanent or contract work.

Suitable to work in process/operation area as technician (field & panel op) supintendent, etc.

My field experience is 20 years in monitoring, planning and executing exploration programme for following minerals,1.coal, 2. iron-manganese, 3. tungstan, 4. diamond,5. lithium-rubidium-cesium, 6 copper. Leasing and liasoning work with govt. and private cos. Project manager-05 years exp.

Seismic field processing on Promax for 10 years and actually short experience on CGG software

Over 23 years experience in engineering and project management in Oil & Gas, refining, and petrochemical environment. Extensive knowledge in particular aspects of project engineering, mechanical and maintenance engineering. Key engineering competences include procurement of major capital equipment.

O&G prospect/areal HC content assessment by a hand-picked series of near-surface, geochem-related, composited anomalies very indicative of commercial deposits.

MEP Professional Engineer with advanced Management Knowledge For High Rise Building

Over twenty-five years of work experience in the Oil, Gas and Petro - Chemical Industry,

I have 20 years of experienced in the field of Quality Control, Material Engineering and Construction Supervision in Heavy Construction such as: PetroChemical industries, Pipelines, Infrastructure, Highrise Building, Commercial Mall, Sewage Treatment Plant, Pumping Station, Milk Processing Plant etc

Extensive experience in project mgmt, tool,fixture, & machine design

Over 24 years global experience in reservoir development and management of oil and gas condensate fields.

Snr Project Engineer with Lead Process Engr / Manager and multidiscipline experience over 20 years in major international oil / gas & petrochem projects with leading Engineering and Operators in Europe ,US, Africa (Nigeria) and Mid East.

Petroleum Engineer with over 30 years of experince in oil and gas fields operation and maintnanace, including design and construction of surface facilites(Pipeline)

QA/QC ENGINEER

An experience individual with excellent knowledge of Sales/Marketing, Freight handling, Imports/ Exports Management with the objective of achieving organizational goals and making it a strong profit center seeks an opportunity in managerial capacity

I offer a broad range of upstream petroleum business skills and leadership experience covering exploration/development planning and LNG project execution, subsurface and production facilities planning, economic analysis, strategic planning, commercial/legal negotiations and corporate communications.

Five tears of experience in the field of industrial environmental monitoring specially related to petroleum and petrochemical complexes.I have sound knowledge of US EPA regulation. I can also design air air polltion control systems.

Senior Project Manager, International Industrial Multi-Disciplinary &Muli-Cultural Projects

I am having vast experience (22 Years) in Maintenance & Projects and in diverse fields. I am suitably qualified (BE, ME, PGDM, PGDIT) to take up any challenging assignments across the globe.

Negotiations, planning, economics in international joint venture gas and midstream projects for past 14+ years. Started career as reservoir engineer with Exxon.

Trade and degree qualified welding engineer and m,etallurgist with 25+ years experience in petrochem, power, onshore rig contruction and computerised welding documentation management.

M.Sc Applied Geology. M.Tech Min Expln,PG Dip In Envt Mgmt & PGDip In Env Scs, 22 years of experience in govt industry. opte vrs ,desg Manager (Environment)

Electrical engineer - building electrical design and rapid transit systems; proposals and specifications; CAD.

Analytical chemist in the fields of oil & gas, petrochemical, fertilizers, pesticides and pharmaceuticals.

Senior mechanical engineer with experience in engineering for material handling, industrial installations and conveying machines in steel industry, mining, cement & chemicals. Start-up assistance for steel industry.

Technical / Lead Safety Engineer

NDT inspector LVL II

reclamation and quarry

11 years experience in offshore construction, field engineering, planning, offshore and onshore project scheduling, field supervision for installation of offshore platforms pipelines spools, pigging and hydrotesting. Preparation of installation procedures, rigging calculations, material procurement

With 12 years in the Oil Field Industry, working in Brasil as well as other countries such as, Colombia, and USA. I became proficient and experienced in Completions, such as Sand Control (Gravel Pack, Frac Pack, High Water Pack, Horizontal Gravel Pack) Upper Completion (single/dual string), Expandab

Network and security Engineer

HR Officer, Recruitment and Administration, Hiring Officer, Hiring Consultant, Marketing

Close supervision of projects handle and monitoring

Degree in Petroleum and Natural Gas Engineering. New Mexico Institute of Mining & Technology (NMT), Socorro NM.

I have masters in Water Resources Management followed by Bachelor of Engineering. Skills in Construction management,people management,sub conatractor mangment,quality control,health and safety

Extensive field application and R&D experience in hard rock drilling rigs, rock tools, DTH hammer, strong trouble shooting skills of hydraulics

I have basic education, knowledge and experience as for Project Metallurgist

Core business is scaffolding; Consulting, controlling, supports, execution business. in Oil & Gas industry and construction industry

Nearly 15 Years QA/QC composite Experince in Electrical Manufacturing as well as Construction of Oil & Gas Central Processing Platform

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 [ 39 ] 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Goto Advanced Search...
Keywords: (e.g. mining engineer)		Find results with:

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out