Resume - Production foreman with twenty years of experience in oil and gas industry.

Misco Jobs

Resume #78291

CONTACT INFORMATION:
View contact information...

Objective
Production Foreman

Experience
2004-present HEP Oil Company Gainseville, TX
Production Foreman
* Increase production by 15%
* Implemented lead men positions to increase accountability in lease managers.
* Introduced well tech to check fluid levels and run dyno
* Supervised 10 full time lease managers 8 contract lease managers, 2 construction foreman and Roustabout crews
* Responsible for daily reporting of surface equipment and well failures
* Monitored all material transfers and equipment inventory
* Designed tank battery and compressor stations on new well hook-ups
* Monitored all chemical use on leases
* Worked closely with Prod Engineers to monitor expenses and production on leases
* Responsible for negotiating all land owner complaints and damages

2003-2004 HEP Oil Company Gainesville, TX
Completion Foreman
* Made sure all rig work was completed in a timely and safe manner
* Scheduled all service companies in a timely and cost efficient manner
* Followed all well procedures and communicated clearly with engineers
* Ran and cemented casing and DV tools
* All phases of completion work on vertical Barnett Shale wells
* Made sure all dirt work was completed after drilling (location clean up)

2001-2003 HEP Oil Company Gainseville, TX
Lease manager
* Tracked all daily fluids, and gas produced
* Diagnosed all problems field related
* Managed all construction and repair
* Managed all well repair in my area
* Very knowledgeable on all type of separation vessels
* Very knowledgeable on all types of salt water inj pumps
* Very knowledgeable on plunger lift systems

2000-2001 C E Natco Electra, TX
Assembly worker
* Assemble gas separator and gas dehydrators
* Followed blue prints for constructing well test trailers
* Assembled production units and tested heaters

1987-2000 Primrose operating/ Mcday energy Wichita Falls TX

I worked for primrose operating for ten years as a lease manager/roustabout/rig operator. They sold to Mcday energy and I became production foreman for three years, managing four full time lease managers and three contract lease managers. These leases were all water floods.

Education
* Burkburnett high school 1986
* Pipeline construction and safety DOT training 2006
* Continuing education, Microsoft word/excel 2006
* Harbison Fisher down hole pump school
2008

Interests
Hunting, fishing and coaching little league sports

I am a very hard working, honest and dependable person. I would like to go to work for a company that has strong family values and challenges me daily to do the very best job that I can. As you can see I have twenty+ years of experience in this field and enjoy my choice of profession. I feel that I would be a great asset to your company. I have several references if you need them.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 3051 to 3100 of 15498)

Go to Search Parameters...

Brief Description

I am applying for welding supervisor and i have 15 year experiance in welding

Maintenance, Installation, Comissioning, Calibration, and Design And Documentation.

Manager shift Combined cycle power plant

Drilling Engineer, 10 years experience, hpht experience, Casing design, advanced well design, drilling fluids, directional drilling, drilling software,

I have 17 years of experience and presently working with Saudi International Petrochemical Co (Sipchem). I have got specialized Skills in maintenance planning and scheduling work process control, CMMS SAP R/3 PM module, Primavera P3 / MS project, RCM, Development and implementation of maintenance

I am a Civil Engineer and have worked about 10 years in the field of environmental field in verious construction industries in nepal with Multinational Construction Companies.

Geologist with large experience in oil and gas exploration and development-Offshore experience and TDC unit manager and well site

10+ years of experience in the field of GIS & construction industry with wide ranging domain and industry expertise.

I have developed over the years a very good and unique network in Africa and have had a chance to only work for multinational companies and one institutional investor company, business development and expansion, sales, corporate strategy, management are my fields.

Certified Welding Inspector (aged 30 years) with more than 10 years experience (Six years in Saudi Arabia having valid Driving License , Singapore & UAE) Oil & Gas / Petrochemical Projects & Semi-Submersible Rigs, Offshore / Onshore Process platforms seeks a challenging position in Inspection Field.

Performance driven procurement and logistics manager offering 14 years expertise in reducing costs while increasing efficiencies in international production and exploration operations. Builds and leads internationally diverse supply chain teams.

3D models PDS, Smart plant Review, PDMS, Autocad, Miicrostation, isometrics, Orthographic Drawing Production

Having 16 years experience in the oilfield, I am a highly motivated, conscientious and experienced professional with a proven ability to work beyond the parameters of the role and to prioritise effectively to meet deadlines.

PRIMAVERA, M.S Office, AutoCAD-2007

Mud Engineer

Total 12+ years of experience (8 Years in India & 4+ Years in Middle East) in Quality Assurance / Quality Control, Inspection and Welding Engineering from Raw Material stage to Final Stage in Fabrication, Construction, during Shut Down / Maintenance, Repair / Renovation work in Oil and Gas, Petroche

Bsc of mechanical engineering 1994, onshore and offshore rigs expernice, joy stick touch screen rigs

Graduate Chemical Engineer with 08 years experience in field of Internal Corrosion and Chemical treament in oil and gas field.

Post Applied for: Planning Engineer / Sr.Planning Engineer (Primavera and MS-Project).

SOFTWARE SKILL: PRIMAVERA-P3 ,P5 ENTERPRISE , P6 PROJECT ENTERPRISE V.6.0 AND PM+

Directional Drilling Operator,Locator and Site Supervisor.ITI Electronics

Seeking A Challenging Overseas Position in a professional org MSProj & Premevira

BTech in Mechanical Engineering specialised in Designing HVAC systems.........

Geophysicist with more than 20 years experience, out of which 9 years in marine seismic data acquisition, QC, Party Manager & HSE. Good academic background with an M.Sc. in Geophysics and MBA in Admin.Management, with wide experience working in 2D & 3D seismics.

Manager for techno commercial jobs in mining machinery

A highly experienced and versatile project management and professional engineer with over 15 years of engineering and project management experience in the Oil and Gas industries. Extensive experience in various types of oil and gas projects.

Business Plan Modeling, Project Management, Motivational Team Leader

I have twenty five years mining/supervisory experience in exploration,construction,mining, and reclamation. A true professional in my field

Landman work; Due Diligence; Assignment breakdowns; Figuring ORRI, NWI, NRI; Curative;Title research; Title abstracting; Ensuring complince with governmental and enviromental regulations; Acquisitions; Right of way; Leasing; Geophysical permitting; Mapping skills; Extensive computer knowledge

ESTIMATING, PROJECT MANAGEMENT,HEAVY EQUIPMENT OPERATOR, UNDERGROUND UTILITIES

Algerian petroleum geologist with +8 years of experience in the area of petroleum exploration and geomechanical engineering. Looking for an international carrier in the area of petroleum geology or geomechanics

Underground fitter/machinist, with hydraulic experience, and am proficient in all types of welding. Reliable, motivated, self-starter, that is safety oriented. I have great interpersonal skills and work well with others. I go that extra mile to get the job done efficiently.

I have over 22 years in the underground mining industry in all aspect of operations

During 8 years experience in Oil & Gas industry, I was fully in charge of Reservoir Engineering. I have done 3 reservoir simulation jobs , PVT Analysis, Static Pressure Analysis, Transient Pressure Analysis, Reserve Estimation, Material Balance, Decline Curve Analysis ,field job supervisory

Over 20 years managing equipment. Large tunnel, heavy civil jobs and managed jobs across state and states. I have been involved in training and presentations to improve and maintain safety and service. I enjoy a challenge and enjoy reaching goals and working with a team or teams to reach a common go

Management

I would like to continue my career in mining as an equipment operator or a supervisor/foreman. I have worked in or around mines for the last 25 years, the last 5 as a supervisor.

A. Competencies/Skills for over fourteen (14) years of experience in different projects as Crane Operator and Heavy Equipment Mechanic a. ARAMCO-Certified Crane Operator in oil and gas wells for all required works in drilling and rig moving b. Qualified Crane Operator for underground civil works c.

24 years experience in completions and workovers.

Well site supervisor for 4 years specilizing in horizontal, directional, underbalanced, reentry wells.

I am a HVAC /Electrical Lead technician with 22years experience 19 years in Multi-national oil companies both onshore and offshore for production platforms and perform preventive maintenance activities, job scheduling including preparation of JSA with relevant parties .

Electrical Engineer

Metallurgical process supervisor/trainer Experianced on Gold ,Copper and Uranium

I am 46 years old, hardworking and trsupervision. Seeking permanent employment overseas. ie: Dubai.ustworthy. My attendance is 100%, never having had any sick time from my work in 25 years of full time employment. I can use my own initiative, and am able to work without supervision.

Workover/Completion Consultant/Supervisor

Production foreman with twenty years of experience in oil and gas industry.

Occupational Health and Safety Engineer with Industrial Hygiene Background. Worked on Variety of Oil & Gas Project

26 yrs in manuufacturing,buying scheduleing,inventory control,lean manufacturing,JIT,Kanban

pressure welder

First Prev 51 52 53 54 55 56 57 58 59 60 61 [ 62 ] 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 Next Last

Seach Parameters


Goto Advanced Search...
Keywords: (e.g. mining engineer)		Find results with:

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out