Resume - Eighteen years of combined experience in the petrochemical/petroleum and aerospa...

Misco Jobs

Resume #78437

CONTACT INFORMATION:
View contact information...

EDUCATION:
Bachelor of Science in Mechanical Engineering, May 1990 Texas A&I University,
Kingsville, Texas

SUMMARY:
Eighteen years of combined experience in the petrochemical/petroleum and aerospace industries working for engineering contractors and operating companies. Experience with project management, project development, construction engineering, equipment maintenance/reliability, design, cost estimating, cost budgeting, project scheduling, plant start-up/shut-downs/turn-around, hazard analysis and safety.

EMPLOYMENT HISTORY:

Project Engineer; Jacobs Engineering, Texas City (2-2008 to 2009) working as a project engineer for Jacobs Engineering at the BP Texas City refinery in the Infrastructure group.
* Responsible for complete execution of project from project scoping until construction completion.
* Development of a project design basis with the customer.
* Development of a project options table for customer.
* Development and finalization of a project scope of work.
* Determine and present to the customer 50%, 30% and 10% project estimates for each phase of the project.
* Monitor Labor tracking for all projects
* Managed schedules for all assigned projects.
* Managed forecast budgeting for all phases of the project.
* Managed all project disciplines for project deliverables.
* Develop project end of phase package and submit to customer for approval.
* Each project requires integration with operations, evaluate technologies, environmental permitting, bi-weekly project team meetings, complete all project assurances, discuss safety at all project meetings and interact will all project disciplines.
* Projects included Docks Couplers and PLC Replacement ($2.5MM), Docks Shoreline
Erosion Protection ($5.7MM), Oil Movements de-watering improvements to Pipestills unit ($5.7MM) and Oil Movements Thermal Relief Protection (6.7MM) project.

Reliability Engineer; SAIC, Houston, Texas (06-2000 to 02-2008) Worked as a Shuttle Safety and Mission Assurance (S&MA) engineer for SAIC (Science Applications International Corp.) for the aerospace field (space shuttle) as a contractor to NASA. Job specifics are subsystem engineer for APU (Auxiliary Power Unit), PV&D (Purge, Vent and Drain) and Hydraulics Subsystems for space shuttle.
* System engineer that interfaces with the design contractor (Boeing)/Problem
Resolution Team (PRT) and review all design problems, design changes and/or upgrades to the system and determine if the recommendations are acceptable from a shuttle S&MA perspective. In addition, monitor real time on orbit flight anomalies for APU/HYD/PVD subsystems and work any condition which may pose a safety of flight and/or safe return of the Orbiter.
* Understand all Hazards and Critical Items List for the APU, Hydraulic and PVD
Subsystems and use the knowledge for determining safety shuttle concerns.
* Understand APU, PVD and Hydraulic systems from a mechanical, electrical, and operational design aspect.
* Review PRT subsystem anomaly conditions and submit evaluations, reports and/or present observations to NASA safety management on S&MA position for the subject.
* Review subsystem failure history for daily problem resolutions, recurrent problems and hazards.
* Review problem trending and report to management as preventative measures to monitor the APU and PVD subsystems.
* Review subsystem Corrective Action Records (CAR) for Screening and closures by having S&MA position.
* Attend weekly meetings with Boeing and subsystem group to review weekly subsystem activity and support all CARs and any other anomalies with the APU, Hydraulics and PVD subsystems.
* Review preliminary design drawings for Crew Escape Vehicle (CEV).
* Review hazards and fault trees for CEV subsystems.
* Attend training classes to continuously enhance safety and subsystem awareness.

Project Engineer; Bay Area Technology, Houston, TX. (03-99 to 05-00)Worked as contractor on-site at Hamilton Sundstrand, primarily focusing on the space shuttle subsystem Waste Collection Subsystem (WCS).
* Project Manager to design WCS for NASA testing. The project included project cost, schedule and design to duplicate the WCS fan separators for NASA lab testing ($40K).
* Project lead to initiated hazard analysis on all ground support equipment interfacing with the WCS unit.
* Created and completed pneumatic and electrical schematic drawings for all test stands used on the WCS unit.
* Initiated, completed and maintained the maintenance refurbish book for all four WCS
units to list common findings.
* Learned introduction to Pro/Engineer component design program by attending a 40
hour course.

Project Engineer; Nassau Engineering Corporation, Houston, TX. (8-96 to 2-99)
Worked in-house and on-site, primarily with PPG and Hampshire Chemical, as well as Air Products and Nalco/ Exxon.
* Performed front end and detail engineering and developed preliminary, as well as detailed, project estimates.
* Developed project scope and P&ID's.
* Sized and specified equipment.
* Projects included for front end pilot plant expansion ($1.6MM), install reactor overhead condenser ($0.5MM), upgrade caustic dilution facilities ($0.5MM).
* Reviewed and implemented plant improvements by eliminating safety hazards and reducing ergonomic safety concerns.

Maintenance Engineer; Formosa Plastics Corp., Point Comfort, TX. (6-94 to 8-96)
Vinyl Chloride Unit. Primary responsibilities included: focusing on maximizing production by reducing equipment failure and downtime, lowering maintenance costs, and minimizing safety/environmental concerns. Other responsibilities:
* Total plant shutdowns, which included ordering materials, coordinating contract services, scheduling manpower and coordinating repairs with the Operations.
* Maintained historical records for exchangers, columns, tanks, vessels and rotary equipment evaluating repair summaries and data to identify problems. Resolved any abnormalities.
* Developed, estimated and budgeted mechanical improvement project proposals.
* Initiated, reviewed and managed contractor bid packages for mechanical improvement projects.
* Daily functions included the review of: Plant Operations log for any abnormalities, equipment drawings, P&ID's, company's piping specifications, as well as the monitoring of the monthly work schedule and cost, and participating in ongoing year long preparations for annual turn-around.

Construction Engineer; Formosa Plastics Corp., Point Comfort, TX. (8-90 to
6-94) Assigned to mechanical construction team on the Formosa Expansion Project.
The construction team was part of a new Ethylene (Olefins) unit.
* Responsible for complete execution of project from issuing bid packages to until construction completion.
* Assembled bid packages for piping and tank construction.
* Reviewed vendor bids, P&ID's and isometrics for bid packages.
* Managed inventory for mechanical construction materials (primarily valves).
* Determine construction progress for payment, resolve design issues and changes orders, and develop schedules.
* Projects included underground piping contracts for Olefins plant ($3.0MM), aboveground piping contracts for Olefins plant ($12.0MM) and OSBL tank farm construction for Olefins plant ($6.0MM). In addition, supported other aboveground team projects.
* Gained extensive knowledge of construction engineering, design engineering, API,
ANSI, and ASME specifications.

COMPUTER PROFICIENCY: Excel, Projects, Word, Power Point

REFERENCES: Available upon request

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 901 to 950 of 15497)

Go to Search Parameters...

Brief Description

Experienced Business Management

Instrument Pipe fitter / supervisor

Sr Subsea Controls Consultant

Exposure of new coal mines

Dedicated, creative individual with broad experience in project controls and project administration demonstrating interpersonal and organizational skills, with a proven ability to learn and adapt to change efficiently.

Master FG Cert of competency

Highly Effective Operations Manager. Prospective General Manager.

A Post Graduate (M.Tech. – Electrical) after Engineering (B.E. – Electronics & Communications), supplemented with training on Project Management having total experience of over 28 years, including initial 20 years in Indian Navy and later 8 years in Project design for Utilities, Oil & Gas, Process

Petroleum Engineer, Safety Specialist.Managing, Administering, and Operating Safety and Environmental Health (HSE) programs. * Management/Budgeting. * Supervision. * Team Leadership. HSE/Strategic Planning and Program Development.

Wastewater and water engineer, experience on several process and equipment on water and wastewater technology. Currently working as a Senior Wastewater Engineer for one US CDM company in Jakarta. Very interesting to see if there is a new company willing to enter Indonesia as their Regional off.

I have an extensive experience in detail design and stress analysis of piping and pipeline system for Oil and Gas Project for more than 18 years. I am familiar with International Code and Standards, EPC Company standard, and Major Oil Company Standard.

Pipe stress engineer

Currently a Senior Reservoir Engineer working with an Oil/Gas Major in Lagos Nigeria. I have had various trainings, both through formal courses and on the job. I worked in a studies team in Aberdeen, basically undertaking studies of hydrocarbon fields.

Reservoir Engineer with 25 years of diversified experience in the energy industry including project management of field development and reservoir simulation studies; development and implementation of sales, marketing and business development initiatives for technology products and project consulting

Over 46 years international experience in IT-Enabled EPC projects for onshore/offshore oil and gas, pipeline, petrochemical, chemical process and cryogenic plants, thermal power including cogeneration plants, refineries, iron and steel, pharmaceutical and other industrial plant construction.

I have got Ph.D in Hydrogeology, post M.Sc. (Tech.) in Hydrogeology, M.Sc Geology from prestigious Andhra University. I am having 16 research publications in National and International reputed Journals. I have Completed 3 major Research Projects sponsored by D.S.T. (Department of Science and Technol

Duties & Responsibilities in different Oil & Gas Operator Companies :

16 years of continuous experience in various field of construction in Oil & Gas, Petro Chemical Plants, Manufacturing Plants, Buildings and Infrastructure as a Lead Field Control Engineer, familiarized & having experience to different kind of works of a Planning Engineer, Schedule Engineer, Cost Con

Free! 19 plus years in the on and offshore construction industry working in supervision, electrical installation, Commissioning, surveys, inspection, welding, piping and structural steel positions on projects from oil & gas, marine structures, Distilleries and, documentation control in order to meet sched

Inspection in the field of Electrical & Instrumentation Works

Passed in diploma instrument & conrtol skills in dcs system and manage/conrol our staff

Automation, Control, Electrical, Instrument, SCADA Engineer - 30+ years experience

PDMS Piping/Mechanical Designer

More than 15 years working experience in Electrical/Electronics & Telecommunication.

20+ Years piping designer

QA Management, system creation (ISO9001 / 29001,Q1) development, maintenace - Sipplier Auditing, grooming, assessments. Commerially aware, including budgetery costing for department annual expenditures. Experience in procurement, purchasing and SCM

Working for Petrofac International as Commissioning Engineer

Engineering Technician/ Facility Manager

Senior process engineer

Marine chief engineer and technical superintendent onshoreGood team player with excellent organization and motivation skills

I have 14 years experience in Piping Design and 5 years in PDMS piping design. I have been responsible for job packages start to finish, Isometric extraction, material extraction, survey & field investigation, P&ID changes, working with PDMS, all versions of Autocad, Microstation, and Cadworx

Knowledge in repair, rewinding, servicing and maintenance of electrical equipment such as AC/DC motor and generator ranging from fractional horsepower up to 8000 HP low and high voltage, wet and dry type transformer, coils and etc.

A Mechanical engineer with 17 years experience in marine,mechanical, hydraulics, pneumatics, electrical, elctronics engineer, Presently working as a hydraualic engineer in bosch rexroth, United Arab Emirates.

Instrument Technician Radio technician Scada-moscad

Science graduate with extensive Supervisory experience in Ammonia and Petrochemical (NAO, Ethylene/Sulfur and Formaldehyde) Plant operations/training. With having over 23 years in operations, comfortable working as Supervisor/ Training coach/Co-ordinator/DCS operation, ready to join immediately.

Materials Science and Mechanical Engineering, Solid lab skills in materials testing and examination, Failure analysis to determine the root cause. +10 years manufacturing & energy industry experience. Strong Computer skills-Stress analysis, Numerical simulation. Multi-languages

Fifteen years progressive experience in Construction Management and Engineering, Experienced in building and civil engineering works namely, roads, drainage, sewer and water networks, earth works and deep shaft construction, Full Member of the Charted Institute of Building UK (MCIOB)

Eighteen years of combined experience in the petrochemical/petroleum and aerospace industries working for engineering contractors and operating companies. Experience with project management, project development, construction engineering, equipment maintenance/reliability, design, cost estimating.

15+ years of experience

has 18 years of experience in design and Projects in different disciplines, Mechanics, Piping and Structures, especially in Projects Mining, Industrial, Metal-mechanics, Design Systems CAAD (2D) and PDMS (3D), also Works in Land and Assembly

Geologist, coal specialist, exploration, production, data managment

Register Mechanical Engineer & certified 3.1 Welding Inspector.Speak , write, read english fluently.Well-versed in computer & different codes & standard like ASW,ASME,API & BS.Good knowledge of AUTO CAD & engineering drawings.

With more than 14 years Laboratory experience in Petroleum Refineries after my post graduation in Chemistry and Diploma in Environmental Management and ISO 14000/14001 I have Excellent Knowledge of ASTM /UOP methodology and their instrumentation.

ENGINEERING, CONSTRUCTION, MAINTENANCE, TROUBLESHOOTING, FIELD SERVICE, SUPERVISION

Petroleum engineering professional with diversified domestic USA and international experience in E&P

Senior Instrument , Electrical, Rotation, Engineer, Project Management

Internationally experienced executive, multilingual, results oriented teambuilder

I am an electrical engineer with 24 years experience 10 of which were in a power utility and 14 as an energy and environment consultant. My strengths are in energy planning, energy efficiency improvement and also in climate change.

Highly experienced in dealing with Engineering, Project and Procurement coordination for Static equipments and Packages. Experienced in EPC,PMC,FEED and Study type of jobs and well versed with renowned Codes and Owner Company Standards. For further details, please refer my CV attached.

An experienced Manager with muti-skill in Quality Assurance, Quality Control, NDT, Offshore experience, Oil and Gas sector, Rig building projects, internal/external/regulatory audits, Interpretation of International codes and standards .

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 [ 19 ] 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Goto Advanced Search...
Keywords: (e.g. mining engineer)		Find results with:

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out