Resume - Masters in Electrical Engineering with 2 yrs of experience in Electrical Control...

Misco Jobs

Resume #78458

CONTACT INFORMATION:
View contact information...

OBJECTIVE
A full-time position as an Electrical/Control Systems Engineer, where I can apply my technical skills.

QUALIFICATION

Master Of Science in Electrical Engineering from Texas A&M University, G.P.A 3.33

PROFFESIONAL SUMMARY
A qualified Electrical and Electronics Engineer with two years of experience with operations, maintenance and quality control of electronic DCS equipment.
Expertise in deisgn, configuration and programming of DCS like Honeywell Experion PKS and ABB Advant OCS,
PLC & SCADA.
Experience in operations and maintenance of wide spectrum of equipment and components.
Adept at preventive and breakdown maintenance.
Skilful in enhancing systems to bring greater cost efficiency levels and energy and power reductions.
Proven abilities in executing the same for minimization of quality defects.
Possess excellent analytical, problem solving and organizational abilities.

WORK EXPERIENCE

TESTENGEER INC,Port Lavaca, Texas
Control Systems & Process Automation Division
Designation: Control Systems & Instrumentation Engineer

Project #1
GULF CHEMICALS & METALLURGICALS, Freeport, Texas April 2008 – Till Date
Role: Control Systems & Instrumentation Engineer
Responsibilities:

Build new controls for various devices and machines at the plant with ABB distributed control systems (DCS ) using the existing drawings.
Build new loops and graphics for the ABB ADVANT OCS.
Configured automatic reports using Excel and VBA to generate automatic sequencing in batch reporting.
Configured automatic reports generation for batch reporting using third party tools like crystal reports and datadirect softwares
Analyse document, implement,maintain and improve existing controls,facilities,components,products and systems for commercial and industrial purposes.
Configured Logs and Trends on the DCS.
Wrote TCL sequencing programs for incorporating new instrument loops for the plant expansion.
Responsible to draw graphical screens to show the status and working of all the devices of a process, at one place.
Required to involve in programming devices using PLC.
Work with the senior engineers and technicians to assure accurate and adequate knowledge of the materials used during the design, build and evaluation of potential problems.
Maintain open line of communication with supervisory personnel and provide assistance in multiple projects when needed

Project #2
FORMOSA PLASTICS CORPORATION, Port Lavaca, Texas Sept 2007 – April 2008
Role: EPC Project Engineer(Instrumentation)
Project: SPVC Plant Expansion
Responsibilities:
Engineering,procurement and Construction lead role for the whole plant as part of the expansion plan.
Specification evaluation and bit package evaluation and decision making in purchase of process instrumentation equioment.

Project #3
CITGO OIL REFINERY, Corpus Christi, Texas June 2007 – Sept 2007
JAVELINA MARKWEST GROUP REFINERY, Corpus Christi, Texas
Role: Control Systems & Instrumentation Engineer
Project: DCS Migration from TDC 2000 to Honeywell Experion PKS
Responsibilities:
Identification of decommissioned loops, building new loops.
Building I/O index and doing field survey for instrumentation design.
Converted more than 200 graphics as a member of team from TDC 2000 to Honeywell Experion PKS, with backend coding in Visual Basic..
Building reports, trends.

INDUSTRIAL TRAINING
COURSE IN ABB ADVANT OCS DISTRIBUTED CONTROL SYSTEM.
COURSE IN ALLEN BRADLEY SLC5 & MICORLOGIX PLC PROGRAMMING WITH WONDERWARE SCADA.

EDUCATION
Texas A&M University, TX GPA 3.33
M.S, Electrical Engineering, Dec2006

JNTU, Hyderabad, India
B.E, Electrical, Electronics and Communication Engineering, July 2003

RELEVANT COURSEWORK
DistributedControlSystems,VLSISystemDesign,VHDL,Microcontrollers,DSP,DIP,SpeechProcessing,PowerElectronics,PowerSystems,ControlSystems,ComputerModellingofpower systems, Computer Organization, I.C Analysis &Design, Solid State Processing and I.C Lab, Integrated High-Frequency High Speed Comm.Circuits,ComputerNetworks,ElectricalTechnology,ElectricalTransmission&Distribution,SystemDesign,Telecommunications,DynamicSystems, Database management systems, Software engineering, Object Oriented Programming.

SKILLS
* EDA tools: HSPICE, Model Sim, MATLAB,AutoCad,OrCAD.
* PLATFORMS: Windows 9x/XP/2000, UNIX/LINUX.
* ERP: Oracle 9i business suite.
* RDBMS: Oracle 7.x /8i/9i,forms/reports.
* SCADA Software Tools: WONDERWARE,CITECT.
* Languages: C, C++,Visual Basic,TCL, Verilog, SQL & PL/SQL, Java.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 6051 to 6100 of 15477)

Go to Search Parameters...

Brief Description

Senior Assistant + Engineering Technician with 3 yrs. work experience in Dubai and Building Maintenance Engineer with 5 yrs. work experience in hometown. Autocad 2009 & Revit Architecture software I used at work.

ƒæ Mecahanical Pump,Gearbox,roll,and all,ƒæ Mechanical Install Machine Project ,ƒæ Drafter (2D, 3D, Isometri),ƒæ Preventive, Proactive, Predictive And Corective Maintenance,ƒæ Mechanical Maintenance and Welder,LATHE/Milling Machine,Theodolit Elevasion,Microsoft Office

PIping, PDS, CAD

B.E. Mechanical Engineer with 4 years of Experience in Commissioning and Maintenance of Industrial Equipments in Refinery and Oil & Gas Field.

LOGISTICS, SHIPPING, BILLING, SAFETY OFFICER

I have had experiences for 4 years in wireline operation, drilling and production area. Having good knowledge of Bottom Hole Equipment, mPLT, gauges and other conventional wireline jobs.

Problem solving skills in core Mechanical Engineering and in the area of Structural Mechanics; Ability to handle multiple tasks with good time management skills; Self-motivated, highly responsible & organized, strong written and verbal communication skills, Knowledge of Design Engineering Stres

Oil and Gas Lawyer (Masters Degree)

As the Cost Engineer in one of the leading owner and operator of FPSOs, my main task is to provide effective cost control measures for the ongoing conversion projects. Good interpersonal skill is an important aspect as my role requires liaison with various parties of the hierarchy from

MSHA Qualified Electrician, Part 77.103 since 1993/ Instrumentation/ HVAC

3.5 years of experience in Structural drafting, Structural Analysis and Detailed Structural Design Engineering. Experienced in RISA, Strand7, AutoCAD, MathCAD and X-steel.

Diploma in mechanical engg

Customer support , service engineer, bio medical engineer

Honours degree in Geology/Petroleum Geology, 4 years offshore experience, 3 years as LWD/MWD engineer, valid offshore safety and medical certificates

ME Environmental Engineering and management in One year Exp in Wastewater treatment plant, & my skills is Designing of wastewater water treatment plant,Air pollution control,biological treatment system.

Welding Inspection and also able to perform Welding Engineer job.

I am currently looking for work in the Texas Panhandle region. I have 7 years of experience in the Oil/Gas Pipeline control systems.

Mining Engineer

Field Experience Upstream Production Testing / Logging. Petroleum Eng Background

C,C++,MATLAB,ZMAP,GIS,CRISIS,SIGMA PLOT

Experinced seaman of over 12yrs on boats

RELEVANT ACQUIRED SKILLS Working Knowledge of ECLIPSE Reservoir Simulator and OilField Manager (OFM), Programming in FORTRAN and C++, Proficiency in Microsoft Word, Excel and Power Point Applications and AutoCAD

I have 4 years exp in Oil & Gas Industries as an Electrical Maintenance Engineer. i did B.Tech (Electrical) at Rajasthan University. Now i am working in ESSAR OIL Ltd as a Maintenance Engg.

Coal Bed Methane Drill Site Supervisor

To operate shutting down / starting-up the processing plant assigned to an Offshore / Onshore platform for collection, treatment & inward transmission to consumers of oil & gas. To mix chemicals, prepare the plant for routine / planned maintenance and carry out first line maintenance.

My expertise includes strong hands-on technical skills with ECLIPSE and MBAL software applications. I am highly skilled in EOS fluid characterization, well test analysis, reservoir modelling, manage mature reservoirs, well monitoring

Excellent experience in the oilfield, having worked as Rig Manager for 3 1/2 years , working on Top Drive Telescopic Doubles, scissor sub and Super-single rigs.Good communicator, speak fullest Spanish excellent people skills and works well with others

I am graduated faculty of engineering, stillworking in my Master Thesis, Last position AD on MAERSK ENDURER HPHT Jack-up

I am a mechanical engineer with over 25 years of experience in designing, engineering and field servicing of various types of mechanical equipment.

I am a Static Equipment Design Engineer with %+ years experience. I have work experience in Both static and Rotating equipments. Ihave strong exposure to design softwares such as Compress, B-JAC, etc.,

A Mechanical Engineer with 4.7 years of experience in a piping &Pressure Vessel Currently working as QA\QC ENGINEER in M/s KALPATARU POWER TRANSMISSION LTD, GUJARAT

Post graduate in chemical engineering with impressive skills and work experiences seeking a full time position as a chemical/process engineer.

sound knowledge of engineering hydrodynamics, fluid dynamics, working experience with subsea pipelines (marine riser), having received master degree in offshore engineering, seeking an opportunity in the filed of subsea engineering.

Masters in Electrical Engineering with 2 yrs of experience in Electrical Controls & Instrumentation

Quantity Surveyor able to takeoff, variation claims, valuation, computers,caddrawing

Having 14 years of work experience in Ship Building/Repair, Petroleum and Mining industry in both Philippines and Dubai (UAE).Worked as Insulator, Tinsmith, Pipe fitter, Fabricator and CAD Operator for mechanical and structural works. Used AutoCad Software as drafting tool.

Test Engineer

Microsoft office, Auto cad, SAP, Everstress, Winhwy

2 years of Knowledge of the environmental compliance requirement (40 CFR Part 60, 40 CFR Part 71, and 40 CFR Part 75); 4 years of experience working with continuous emission monitoring systems (CEMS).

Oil & Gas Land services

Procuction,project,commissioning experience in chlor alkali industry

journeyman electrician

Diploma in mine survey from the Zimbabwe school of mines. All round surveyor capable of all underground surveys plotting and reports; all surface surveys including all setting out, pit surveys and volume calculations, road surveys,cut and fill calculations using total stations, GPS & automatic level

Landman

Chemical Engineer, Piping, SmartPlant 3D (SP3D), 5+ years of exp.

Fluent in English and Filipino. Knowledgeable in computer and customer service related works. Possessed with proper knowledge, good quality of administrative and banking skills and right attitude. Interests include surfing the net and socializing with people. Goal-oriented, adaptable, determined and

Procurement Engineer with 4.5 years of experience in Procurement of Static Equipments, Packages and Piping Specality itemd for EPC Project. Act as focal point for all Third Party Inspection for all Packages, Piping bulks etc required for EPC Contracts. Also acting as Logistics Controller

Accumulated almost 10 years working experience in Apo Cement Corporation, Cemex, Philippines. Directly involves in operation, inspection, maintenance and commissioning of the following Krupp Polysius AG manufactured equipment: 2 units 170 tons/hour cement grinding tube mill, 2 unit 300 tons/hour VRM

James is a biologist in marine and coastal ecosystems and associated marine issues, as well as geographical information systems (GIS).

DCS Control Room Operation In Hydrogen. LPG MEROX At World Largest Petroleum Refinery In Reliance Industries LTD

First Prev 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 [ 122 ] 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 Next Last

Seach Parameters


Goto Advanced Search...
Keywords: (e.g. mining engineer)		Find results with:

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out