Resume - I have a comprehensive understanding of a wide and varied range of vehicles, inc...

Misco Jobs

Resume #78556

CONTACT INFORMATION:
View contact information...

Personal Profile

I have a comprehensive understanding of a wide and varied range of vehicles, including HGV, PSV, Heavy Plant and Drilling Machinery. I am keen to use these multiple skills in a post which will prove challenging. In addition to my mechanical capabilities, I also have a good working knowledge of hydraulics, pneumatics, welding and auto-electrical work.

Employment History

Axmin Ltd (Mineral mining) September 2007 – December 2008
Chief Mechanic

I worked as the chief mechanic covering three geographical areas. I was responsible for the supervision and training of staff at locations in Mali, Senegal and the Central African Republic (CAR). My duties involved the maintenance of the vehicles used by the company the general servicing and upkeep of the drilling machinery. I had to make sure that the Health and Safety regulations where upheld and that staff rotas where set up.

Firth Diesel Injection, Rotherham 2002-2007
Diesel Fuel Injection Technician

My duties involved the Overhaul and repair of Lucas, Bosh, Nippon Injectors and Fuel Pumps.

Key Group, Holland 2001-2002
HGV Motor Mechanic

Responsible for carrying out:
* MOT Preparation
* Overhauling engines and gear boxes
* Running repairs of vehicles

John Powell Travel, Hellaby 2001-2001
PSV Motor Mechanic
Responsible for carrying out:
* MOT Preparation
* Overhauling engines and gear boxes
* Running repairs of vehicles

RJB (Mining) Ltd., Doncaster 1996-2000
Plant Engineer
Working on heavy plant, carrying out a range of activities including:
* Overhauling fuel pumps
* Gear box and engine repairs
* Axle repairs

British Direct Aid UK, Rwanda 1995-1996
HGV Mechanic
Working within local communities:
* Training indigenous population in mechanical skills
* Supervising trainees

Between 1965 and 1995 I had several job working for local transport companies. These include:
* Sheffield Omnibus Co., Sheffield ( PSV Fitter)
* Trinity Bus Engineering, Wakefield (Engine and Transmission Fitter)
* David Browns Ltd., Rotherham (Transmission Fitter)
* Yorkshire Traction, Barnsley (Engine and Transmission Fitter)
* Smith Shearing Ltd., Barnsley (PSV Fitter)
* Richardson Travel Ltd., Sheffield (PSV Fitter)
* National Travel Ltd., Sheffield (PSV Fitter)

My duties with these companies included:
* Overhauling engines and gearboxes and rear axles
* Overhauling heavy and light transmissions
* Over hauling bus and coach engines and gearboxes
* Preparing vehicles for MOT
* General servicing of fleet vehicles

Training
British Leyland, Lancashire-Engines and Gearboxes
Gardner Engines, Manchester
ZF Gearboxes, Nottingham April 1976
May 1977
October 1977

Further Education
Granville College, Sheffield

1965-1968

Motor Vehicle Craft Certificate Parts 1& 2
Motor Vehicle Technician Certificate Part 3 Distinction

Education

1960-1965 Beaver Hill Comprehensive School, Handworth, Sheffield.

Completed a good general education in all curriculum subjects

Hobbies and Interests

Photography including developing and printing in black and white. Sheffield Inter-Varsity Club.

References
Will be provided

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1901 to 1950 of 15497)

Go to Search Parameters...

Brief Description

Health, Safety and Environment Specialist/Instructor with National (CIED-PDVSA) and International (North Sea) Certification. HSE and H2S Instructor. 20 years experience in Drilling, Production and Crude Oil Transportation in Safety related areas with National and International Operators and Contract

HVAC PROJECT MANAGER

Professional Oil and Gas Geologist (Masters Level) with 10+ years global Wellsite and Operation Geologist experience. Experienced in pre-planning, supervising and post-well wrap-ups of multi-well/multi-rig programs.

Chemical Engineer, P.E. Petrochemical Design Background Experience

ISO Compliance, 6 Sigma, Asset Mgmt, Vendor Mgmt, Catering, Transport, HK, Costing & Budgeting, HR, Employee welfare, FBT, Guest house mgmt, PF, ESIC, Medical, Fire drill, Security, Solving Employee feedbacks, Auditing, Billing.

I am a proficient project Manager in GIS with ESRI and ERDAS technologies

 11.0 years exp. normal Operations in a petrochemical & Gas plants mainly in operation of centrifugal compressors (cooper, kobelco & Elliott),reciprocating compressors ( IR ,SULZUR & Burckhardt ) ,all type of pumps (mainl

13 years in quantity surveying

18+ years automotive mechanics,11+years powder metal industry blending heatreat operations etc.

Rotating equipment / mechanical maintenance technician / Commissioning technician

Experienced, results oriented, safety minded manager

Oil & gas consultant with 29 years of experience and supervision on land, platform, jack-up and semi-submersible rigs. Proactive leader with strong communication skills, both verbal and written. Effective problem solver and decision-maker.

I have been working as an exploration geologist for 20+ years, field work to project management, Porphyry, Magmatic and Gold deposits in Canada

Structural Designer

To Secure a position with an established organization, to utilize my knowledge and experience in the field of Heavy Duty Equipment.

diploma in mech.eng, NVQ-level -3

Experience Drilling Supervisor, Land & Offshore

Dependable, motivated and organized hard worker who learns new procedures quickly, and meet schedules

I have a comprehensive understanding of a wide and varied range of vehicles, including HGV, PSV, Heavy Plant and Drilling Machinery. I am keen to use these multiple skills in a post which will prove challenging. In addition to my mechanical capabilities, I also have a good working knowledge of hydra

Career Maintenance Manager Mining

Rig Manager / Mechanical Engineer

Twenty five years in the Oil and Gas industry all of which was in the discipline of Project Services and Controls, providing leadership in Estimating, Cost Control, Planning, Scheduling, Contract Administration services. In-depth exposure in Heavy Oil, Natural Gas, Petro-Chemical, Compressor Package

Senior construction manager

Electrical estimator in industrial and commercial construction. Proficient in WinEst and Excel.

Diamond Drill Operator, surface drilling with the use of various types of machinery

Oil & Gas Landman

23 Years hands on construction/on site experience.MDP Project Management, Employed by EPCM company for 14 years prior to retrenchment, then focussed my attention on positions abroad.

Results-driven project and program management professional with first-rate skills in directing full cycles for complex, multi-site programs and initiatives. Proven ability to deliver substantial revenue, productivity, and quality improvements through well-managed, on-time projects.Particulary strong

28 years experience in ug/ hard rock and coal. Hard Rock: Alimak, Drift (rubber and rail), all types of stoping methods, and equipment operator of 1,1/4yd to 9yd loaders all brands, over shot rail muckers from 12b to 25 , jumbo drills single and double boom. Coal: Fletcher bolter and long wall

30 plus years experience with heavy equipment both as an operator and supervisor.

Procurement & Contracts Expertise

Marine engineer with all training necessary and green card

National Diploma in Chemistry and 28 Years experience in Laboratory work and management.

8 years of experience as MBBS doctor with additional skills in administration, project management, liasoning, coordination, HR management, quality monitoring, emergency health care, Trainings, Lecturing, critical reviewing and remote place health services.

20 years signalling experience with IRSE licenses and Signal Maintainer certificate. SPONSORSHIP PREFERED.

Environmental Management include the preparation of complete EIA report for various industries in relevant to sustainable use of resources / quality health safety environmental management / various water treatment components. Qualification - M.Sc. in Enviornmental Science.

PETROLEUM GEOLOGIST with experience in exploration, development, acquisitions, divestitures, and operations. Experienced in clastic, carbonate and salt environments. Available to travel for either permanent or contract work.

Suitable to work in process/operation area as technician (field & panel op) supintendent, etc.

My field experience is 20 years in monitoring, planning and executing exploration programme for following minerals,1.coal, 2. iron-manganese, 3. tungstan, 4. diamond,5. lithium-rubidium-cesium, 6 copper. Leasing and liasoning work with govt. and private cos. Project manager-05 years exp.

Seismic field processing on Promax for 10 years and actually short experience on CGG software

Over 23 years experience in engineering and project management in Oil & Gas, refining, and petrochemical environment. Extensive knowledge in particular aspects of project engineering, mechanical and maintenance engineering. Key engineering competences include procurement of major capital equipment.

O&G prospect/areal HC content assessment by a hand-picked series of near-surface, geochem-related, composited anomalies very indicative of commercial deposits.

MEP Professional Engineer with advanced Management Knowledge For High Rise Building

Over twenty-five years of work experience in the Oil, Gas and Petro - Chemical Industry,

I have 20 years of experienced in the field of Quality Control, Material Engineering and Construction Supervision in Heavy Construction such as: PetroChemical industries, Pipelines, Infrastructure, Highrise Building, Commercial Mall, Sewage Treatment Plant, Pumping Station, Milk Processing Plant etc

Extensive experience in project mgmt, tool,fixture, & machine design

Over 24 years global experience in reservoir development and management of oil and gas condensate fields.

Snr Project Engineer with Lead Process Engr / Manager and multidiscipline experience over 20 years in major international oil / gas & petrochem projects with leading Engineering and Operators in Europe ,US, Africa (Nigeria) and Mid East.

Petroleum Engineer with over 30 years of experince in oil and gas fields operation and maintnanace, including design and construction of surface facilites(Pipeline)

QA/QC ENGINEER

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 [ 39 ] 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Goto Advanced Search...
Keywords: (e.g. mining engineer)		Find results with:

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out