Resume - Structural Designer

Misco Jobs

Resume #78662

CONTACT INFORMATION:
View contact information...

MEMBERSHIP IN PROFESSIONAL ORGANIZATIONS
American Society of Certified Engineering Technicians
National Institute for Certification in Engineering Technologies

CERTIFICATION & REGISTRATION
Engineering Technician Certificate 23147 Civil Technology

ACADEMIC ATTAINMENT & COMPUTER SOFTWARE KNOWLEDGE
Graduated Benson Polytechnic School Portland Oregon
Attended University of Illinois Chicago Extension Division
Completed courses on reinforced CONCRETE design & STEEL & timber design
Received 40 Hours PDS/Frameworks Training at Bechtel
Microsoft Word, Excel & Outlook Express proficient
Received Pelican Forge Pipe Support Modeler & Pipe Support Manager Software Training at Bechtel

SUMMARY OF WORK EXPERIENCE
42 plus years of diversified experience in the engineering profession with emphasis on industrial projects. This experience includes the total responsibility for projects, client contact & the preparation of design & construction drawings, from project level through detailing, estimating, material take off, field work, inspection, computations, checking & other items necessary for the completion of the work listed under recent experience. All types of STEEL or CONCRETE drawings; capable of checking all types of civil & structural drawings, vendor drawings & other disciplines. Working knowledge of 3D PDS/Frameworks, Microstation & AutoCAD. Fast Track project teams. Working knowledge of AISC STEEL Manual & Uniform Building Code. Strong working knowledge of discipline specific skills, codes & standard practices. Strong leadership skills, good written, verbal, analytical & interpersonal skills. Ability to organize & prioritize work & meet deadlines. Performed work that involved conventional types of designs with some complex features for which there were no precedents. Use Internet & other Networking tools to complete assignments as required.

RECENT EXPERIENCE
January 2009 to Present
On contract to ASRC Energy Services Anchorage Alaska. On-Shore & Off-Shore
Principal Civil/Structural Designer assigned as a checker to The Eni Petroleum $1.45 Billion Nikaitchuq Oil Field Project North Slope Alaska
Checking Fabrication & Construction Packages (Modules) for Accuracy & Quality

April 2006 to January 2009
Full time employee at Augusta Engineering & Design Inc., South Charleston, West Virginia
Senior Civil/Structural & Lead Designer/Checker
Worked on Natural Gas Compressor Stations for Columbia Gas Transmission of Charleston, West Virginia & Dominion of Clarksburg, West Virginia.
Duties included preparation of Structural Steel & Reinforced Concrete drawings, using Microstation & AutoCAD2006. Additionally I checked engineering & vendor drawings & made trips to the job sites. Strong PC & MS Office application skills. Cable Tray & Pipe Bridges. Access Platforms, Pipe Supports, Buildings, Tanks, Platforms & Equipment Foundations. Site & Plot Plans. Worked with Reg. Professional Engineers on detail steel & concrete design. Worked closely with Piping & Electrical departments & other disciplines, to insure good design & quality construction drawings. Upon completion of the Hardy County West Virginia Compressor Station Project, I personally delivered all drawings to the client at the job site. I am frequently required to work on multiple project tasks at the same time & translate documents into PDF files to share with coworkers, vendors & clients via e-mail. Starting July 2006 I was promoted to Lead Civil/Structural Designer on the Dominion cove Point LNG, LP Air Separation Unit Project, located in Lusby (Calvert County), Maryland. The project in Maryland is located on Cove Point. On the Cove Point Project I developed the Civil, Architectural, Structural Steel & Concrete drawing list and attended meetings with the client & other project team members. Saw Cove Point Project thru from start to finish and Plant is now up and running.
Completed The Empire Pipeline Project. Oakfield Compressor Station, Genesse County New York(AutoCAD 2006) & Spectra Energy Steckman Ridge Natural Gas Storage Project located in Bedford County, Pennsylvania(Microstation V8.)
Assigned to the Bayer CropScience Project located in Institute, West Virginia. Was the Lead Structural Designer for the project.

March 2004 to April 2006
On contract. Bechtel National Inc.
Assigned to work with Pipe Support Group as a Senior Plant/Piping Designer using PlantSpace (PSDS), Triforma & Microstation/J. Preparation of Pipe Support Drawings using PlantSpace & Intergraph Support Modeler~Pelican Forge~Project for the U.S.Dept. Of Energy (D.O.E.) Hanford-Nuclear-Washington State.

July 2002 to March 2004
Contract field assignment at Bechtel National Inc. Engineering & Construction working on job site as Senior Field Construction/Civil/Structural Engineer-Designer.

May 2002 to July 2002
Senior PDS/Frameworks/Microstation/Structural Designer
On contract to ABB Lummus Global Inc., Bloomfield, New Jersey & Houston, Texas. Working with client form China to develop final PDS/Frameworks Models & Drawing extraction's for Microstation presentation. Some AutoCAD drawings. Generated interference envelopes & created freeze files for each model. Verified each model & corrected overlapping members. Worked close with piping & mechanical plant layout groups. Shanghai Hanghai Ethylene Cracker Complex, Caojing, Shanghai, P.R.C. Shanghai SECCO Petrochemical Co. Ltd. Gas Fired Recycle Cracking Heater.

February 2002 to May 2002
On contract to Jacobs Engineering & Construction Company
Mid Ohio Valley Region. Cincinnati, Ohio - Senior STRUCTURAL DESIGNER Modeling in PDS/Frameworks & extracting views for drawing presentation. Made trip to plant site with project team to collect field data & performed duties on survey team. Completed site plan & general notes drawing. Completed Hazard Material Training prior to visiting plant site & completed tests given in office & at the plant site. Prepared Building Addition Foundation Drawing Plan, Sections & Details. Prepared Tank Farm Mat/Slab & Foundation Drawing Plan & Pipe Supports. Sections & Details as req'd. Referenced in piping & mechanical layout files. Made drawing file changes to additional AutoCAD drawings in model space & paper space. Then issued drawings for construction.

January 2002 to February 2002
On contract to Kellogg, Brown & Root Engineering & Construction Company - Senior STRUCTURAL DESIGNER as related to the oil & gas industry offshore ship board project. Responsibilities included structural STEEL module units for ship board installation, piping & electrical & equipment supports, pipe rack layout. Modeled in PDS/Frameworks & extracted views for drawing presentation.

June 2001 to January 2002
On contract to Parsons Infrastructure & Technology Group Inc. - Senior Civil/STRUCTURAL DESIGNER worked with Jacobs Facilities Inc. University of California/United States Department of Energy's Lawrence Livermore National Laboratory, Livermore California. PDS/Frameworks, Microstation & Plant Design Review. Field assignment at project site. Structural STEEL supports for electrical cable trays & equipment; pipe supports & hangers. Some as build drawings & interfaced with other disciplines, engineers, construction & 3D model for the National Ignition Facility (a state of the art program to house the world's most powerful laser). Extended three times to assist on final construction details.

March 2001 to June 2001
On contract to VECO Engineering & Construction Co. On-Shore & Off-Shore
Principal/Senior STRUCTURAL DESIGNER Off shore work for BP Exploration North Slope Alaska using AutoCAD 2000. Developed & provided details for moderate structures, roads, dikes & drainage layouts. Gathered information from all sources required including existing facilities, other disciplines, vendors, engineers, reference drawings & catalogs to produce complete, functional & constructible design packages. Constructed scenarios from various information sources, considered alternatives, develop details & follow through with solid workable solutions for design problems. Operated without supervision on projects. Knowledge of cold regions requirements & BP Exploration & Alyeska Pipeline Service Co. standards. Modular Skid Mounted Units & Surface Equipment a big part of these projects.

January 2001 to March 2001
On contract to Aker Kvaerner Engineering & Construction Co. - Senior STRUCTURAL DESIGNER using PDS/Frameworks & Microstation in the preparation of 3D models & drawing files for Honeywell Chemical Plant Expansion Project. Geismar, La. Structural STEEL & Reinforced CONCRETE.

November 2000 to January 2001
On contract to Watkins Engineering & Construction Co. - Senior STRUCTURAL DESIGNER using Microstation.
Field work at Buckeye Plant, Perry, Florida preparing designs for pulp & paper mill.

August 2000 to November 2000
On contract to I.D.E.A. Associates Engineering Co., Guilford, CT. Job was for Jacobs Engineering & Construction, Houston, TX. Senior STRUCTURAL DESIGNER using PDS/Frameworks & Microstation. GE Plastics Chemical plant expansion project while working with equipment layout & piping designers & engineers on the construction of 3D models. Worked on placement of building grids, walls, columns, beams, vertical & horizontal bracing, floor STEEL, slabs, pads, walls, solids, cutout's, pipe sleeves, stairs, ladders, handrails & toe plate, access grating floor, pipe racks, supports & other items necessary for complete frameworks model & finished drawing files. Updated & generated frozen views & create envelope files for interference checking.

July 2000 to August 2000
On contract to Washington Group International Inc., Huntington, West Virginia - Senior Civil/STRUCTURAL DESIGNER using AutoCAD & fieldwork for PPG Plant. Preparation of foundation plans, sections & details. Structural STEEL & underground piping & drain trenches.

April 2000 to July 2000
On contract to Rolls Royce Marine South Florida - Senior Designer using Microstation J & Triforma. Ship lifting industry preparation of drawings. 550 & 610-ton hoists & associated structural STEEL. Detailing parts & assembly drawings.

May 1999 to April 2000
On contract to British Nuclear Fuels, Richland, Washington - Lead STRUCTURAL DESIGNER using Intergraph Frameworks & Microstation, Structural Triforma & Plant Space. Project: hazardous waste material. High level nuclear waste. Nuclear waste Vitrification River protection waste treatment plant Dept. of Energy, Hanford, Washington. Prepared drawing extraction's, 3D Models in PDS Frameworks & Triforma Annotation. Building of Frameworks Models. Composing Drawings. Generate Construction Documents. Develop section cuts & put on drawings. Supervised & checked work of other designers. Many seismic details. Attend CAD Lead Meetings & coordinated efforts with layout & other departments.

October 1998 to May 1999
On contract to Brown & Root Engineering Construction Co., Mobile, Alabama - Senior Civil/STRUCTURAL DESIGNER using PDS/Frameworks & Microstation. Structural STEEL & reinforced CONCRETE drawings for Vulcan Chemicals Chlor-alkali Expansion project, Geismar, Louisiana. Piling location, pile caps, grade beams, foundations, slabs, pipe racks & building STEEL. Some drawings prepared using AutoCAD. Document extraction, inter-discipline coordination. Completed 2D cad dimensioning, annotation, design sections & details.

January 1998 to October 1998
On contract to The BSI Group, Derwent, Ohio. Work on projects for Texas Eastern Transmission Corp (a subsidiary of Duke Energy Corp), Houston, Texas.
Senior/Lead/Civil/STRUCTURAL DESIGNER in charge of all civil & structural drawings. approx. 300 drawings on two natural gas compressor stations.
Gas City, Grant County, Indiana & Glen Karn, Drake County, Ohio, Compressor Stations. These drawings were prepared using Microstation.
Reinforced CONCRETE & structural STEEL. I supervised the work of other cad designers & worked very close with other disciplines.

October 1997 to January 1998
On contract to Engineering Dept. Proctor & Gamble, Cincinnati, Ohio - Senior/Lead STRUCTURAL DESIGNER using PDS/Frameworks & Microstation. 3D modeling of building structural STEEL, piling & reinforced CONCRETE foundations & slabs. Proctor & Gamble paper plant, Cape Girardeau, Missouri.

December 1996 to October 1997
On contract to Fru-Con Engineering Dept. St. Louis Missouri - Senior/Lead STRUCTURAL DESIGNER using AutoCAD. Prepared structural STEEL & reinforced CONCRETE drawings for the reopening of a pet food plant. I prepared drawings for the grain grinding building, the rail car unloading facility, conveyor & pipe supports, equipment supports, access platforms, stairs, handrails & ladders, floor, elevated slabs, roof slabs, the freezer building, in ground waste water treatment facility. Working with the Lead Structural Engineer we developed a drawing list & estimated the hours & manpower to complete each area. I made two trips to the job site. First to inspect the plant & grounds prior to construction & later to inspect several items & to inspect the precast CONCRETE roof & wall panels. Fast track projects & required much coordination with the other disciplines, as well as the client & field personnel. Additionally I prepared drawings using Microstation & Frameworks. These included structural STEEL utility rack for the waste water treatment area of the MEMC Electronic Materials Inc. plant at O'Fallon, Missouri.

August 1996 to December 1996
On contract to Proctor & Gamble Engineering Department, Cincinnati, Ohio - Senior Civil/STRUCTURAL DESIGNER using PDS/Frameworks & Microstation. Intergraph generated drawings for Proctor & Gamble.

January 1996 to August 1996
On contract to Washington Group International, Cleveland Ohio - Senior/Civil/STRUCTURAL DESIGNER using AutoCAD. For Chevron Chemical Co., on Polystyrene Plant, Marietta, Ohio. Reinforced CONCRETE & structural STEEL drawings. Also worked as Pipe Support Designer involved with the design of over 1,000 small & large bore pipe supports at an Ammonia Plant for Dakota Gasification Co. Beulah, North Dakota.

June 1995 to January 1996
On contract to Basic Systems Engineering & Construction Co., Derwent, Ohio - Senior/Lead STRUCTURAL DESIGNER using AutoCAD. Structural STEEL & reinforced CONCRETE drawings for Shebelinka Gas Refinery Catalytic Reforming Unit, Chevonii Donets Ukraine. Equipment & vessel supports, pipe racks, access platforms, buildings, ladders, stairs, pipe supports, all civil/structural STEEL/CONCRETE in plant. Worked very close with other disciplines.

1991 to 1995
On contract to Foster Wheeler, Clinton New Jersey – Senior Civil/STRUCTURAL DESIGNER

1989 to 1991
On contract to Washington Group International, Cleveland Ohio – Senior Civil/STRUCTURAL DESIGNER

1987 to 1989
On contract to the Celanese Celco Plant in Narrows, Virginia – Senior Civil/STRUCTURAL DESIGNER

1980 to 1987
Various Contract Assignments with MTI & CDI of St.Albans, West Virginia & worked direct for
Lilly Engineering, Beckley West Virginia

1970 to 1980
Various Contract Assignments in & around the Chicago, Illinois Area & worked direct for
Brown & Root Midwest Engineering Center

1967 to 1970
Various Contract Assignments in & around the Portland, Oregon Area & worked direct for
Swan Wooster/Sandwell Engineering & General Drafting Services

1960 to 1967
I was a member of the United States Military

Prior to 1960, I was a student

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1901 to 1950 of 15508)

Go to Search Parameters...

Brief Description

Health, Safety and Environment Specialist/Instructor with National (CIED-PDVSA) and International (North Sea) Certification. HSE and H2S Instructor. 20 years experience in Drilling, Production and Crude Oil Transportation in Safety related areas with National and International Operators and Contract

HVAC PROJECT MANAGER

Professional Oil and Gas Geologist (Masters Level) with 10+ years global Wellsite and Operation Geologist experience. Experienced in pre-planning, supervising and post-well wrap-ups of multi-well/multi-rig programs.

Chemical Engineer, P.E. Petrochemical Design Background Experience

ISO Compliance, 6 Sigma, Asset Mgmt, Vendor Mgmt, Catering, Transport, HK, Costing & Budgeting, HR, Employee welfare, FBT, Guest house mgmt, PF, ESIC, Medical, Fire drill, Security, Solving Employee feedbacks, Auditing, Billing.

I am a proficient project Manager in GIS with ESRI and ERDAS technologies

 11.0 years exp. normal Operations in a petrochemical & Gas plants mainly in operation of centrifugal compressors (cooper, kobelco & Elliott),reciprocating compressors ( IR ,SULZUR & Burckhardt ) ,all type of pumps (mainl

13 years in quantity surveying

18+ years automotive mechanics,11+years powder metal industry blending heatreat operations etc.

Rotating equipment / mechanical maintenance technician / Commissioning technician

Experienced, results oriented, safety minded manager

Oil & gas consultant with 29 years of experience and supervision on land, platform, jack-up and semi-submersible rigs. Proactive leader with strong communication skills, both verbal and written. Effective problem solver and decision-maker.

I have been working as an exploration geologist for 20+ years, field work to project management, Porphyry, Magmatic and Gold deposits in Canada

Structural Designer

To Secure a position with an established organization, to utilize my knowledge and experience in the field of Heavy Duty Equipment.

diploma in mech.eng, NVQ-level -3

Experience Drilling Supervisor, Land & Offshore

Dependable, motivated and organized hard worker who learns new procedures quickly, and meet schedules

I have a comprehensive understanding of a wide and varied range of vehicles, including HGV, PSV, Heavy Plant and Drilling Machinery. I am keen to use these multiple skills in a post which will prove challenging. In addition to my mechanical capabilities, I also have a good working knowledge of hydra

Career Maintenance Manager Mining

Rig Manager / Mechanical Engineer

Twenty five years in the Oil and Gas industry all of which was in the discipline of Project Services and Controls, providing leadership in Estimating, Cost Control, Planning, Scheduling, Contract Administration services. In-depth exposure in Heavy Oil, Natural Gas, Petro-Chemical, Compressor Package

Senior construction manager

Electrical estimator in industrial and commercial construction. Proficient in WinEst and Excel.

Diamond Drill Operator, surface drilling with the use of various types of machinery

Oil & Gas Landman

23 Years hands on construction/on site experience.MDP Project Management, Employed by EPCM company for 14 years prior to retrenchment, then focussed my attention on positions abroad.

Results-driven project and program management professional with first-rate skills in directing full cycles for complex, multi-site programs and initiatives. Proven ability to deliver substantial revenue, productivity, and quality improvements through well-managed, on-time projects.Particulary strong

28 years experience in ug/ hard rock and coal. Hard Rock: Alimak, Drift (rubber and rail), all types of stoping methods, and equipment operator of 1,1/4yd to 9yd loaders all brands, over shot rail muckers from 12b to 25 , jumbo drills single and double boom. Coal: Fletcher bolter and long wall

30 plus years experience with heavy equipment both as an operator and supervisor.

Procurement & Contracts Expertise

Marine engineer with all training necessary and green card

National Diploma in Chemistry and 28 Years experience in Laboratory work and management.

8 years of experience as MBBS doctor with additional skills in administration, project management, liasoning, coordination, HR management, quality monitoring, emergency health care, Trainings, Lecturing, critical reviewing and remote place health services.

20 years signalling experience with IRSE licenses and Signal Maintainer certificate. SPONSORSHIP PREFERED.

Environmental Management include the preparation of complete EIA report for various industries in relevant to sustainable use of resources / quality health safety environmental management / various water treatment components. Qualification - M.Sc. in Enviornmental Science.

PETROLEUM GEOLOGIST with experience in exploration, development, acquisitions, divestitures, and operations. Experienced in clastic, carbonate and salt environments. Available to travel for either permanent or contract work.

Suitable to work in process/operation area as technician (field & panel op) supintendent, etc.

My field experience is 20 years in monitoring, planning and executing exploration programme for following minerals,1.coal, 2. iron-manganese, 3. tungstan, 4. diamond,5. lithium-rubidium-cesium, 6 copper. Leasing and liasoning work with govt. and private cos. Project manager-05 years exp.

Seismic field processing on Promax for 10 years and actually short experience on CGG software

Over 23 years experience in engineering and project management in Oil & Gas, refining, and petrochemical environment. Extensive knowledge in particular aspects of project engineering, mechanical and maintenance engineering. Key engineering competences include procurement of major capital equipment.

O&G prospect/areal HC content assessment by a hand-picked series of near-surface, geochem-related, composited anomalies very indicative of commercial deposits.

MEP Professional Engineer with advanced Management Knowledge For High Rise Building

Over twenty-five years of work experience in the Oil, Gas and Petro - Chemical Industry,

I have 20 years of experienced in the field of Quality Control, Material Engineering and Construction Supervision in Heavy Construction such as: PetroChemical industries, Pipelines, Infrastructure, Highrise Building, Commercial Mall, Sewage Treatment Plant, Pumping Station, Milk Processing Plant etc

Extensive experience in project mgmt, tool,fixture, & machine design

Over 24 years global experience in reservoir development and management of oil and gas condensate fields.

Snr Project Engineer with Lead Process Engr / Manager and multidiscipline experience over 20 years in major international oil / gas & petrochem projects with leading Engineering and Operators in Europe ,US, Africa (Nigeria) and Mid East.

Petroleum Engineer with over 30 years of experince in oil and gas fields operation and maintnanace, including design and construction of surface facilites(Pipeline)

QA/QC ENGINEER

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 [ 39 ] 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Goto Advanced Search...
Keywords: (e.g. mining engineer)		Find results with:

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out