Resume - 6+ yrs. experienced in Tankage Mech. Fabrication & Construction Engineering

Misco Jobs

Resume #78685

CONTACT INFORMATION:
View contact information...

Objective To become a part of dynamic team ready to accept challenging jobs and grow professionally.

Academic qualification
(B.E Mechanical) Bachelor of Engineering in Jayamatha engg. College affiliated by the Manonmaniam Sundaranar university, Tirunelveli.
M.B.A (Master of Business Administration in Project Management): 2008- 2010.
(Studies on-going through distance education) at ALAGAPPA UNIVERSITY ¨C Tamil Nadu
Experience
Summary

6 years of Construction Management & Mechanical Engineering experience related to Petrochemical, Fertilizer, gas, refineries and oil industry includes mechanical static equipment, columns, pressure vessel, heat exchangers, storage tanks and piping.

Name of Organization Duration Designation Location
TECHNIP- France/ SPIE Oil & Gas February '2007- Till now TANKs & SPHEREs Supervisor Qatar
Olayan Descon Ind. Co. September 2005 to January' 2007 Site Engineer ¨C TANK Construction Saudi Arabia
Vijay Tanks & Vessels Ltd.
(VTV) November 2002 ~ July 2005 Project Co-ordinator/ Project Engineer Gujarat ¨C India

Experience profile

Current Employer: TECHNIP- France/SPIE oil & Gas
Designation: TANKS & SPHERE Supervisor
(Line of reporting to Construction Manager)
[Fabrication, Site Construction & commissioning of 8 Nos. Storage Tanks (API 620 & 650) & 4 Nos. Ethane / Ethylene Spheres (U2 / ASME SEC VI II Div. 2) at Ras Laffan Olefin Cracker Project (RLOC)]

JOB RESPONSIBILITIES:
ENGINEERING, MATERIAL & HANDOVER

* To verify/review the equipment's civil foundation design packages conformity to the tanks geometry.
* Co-ordination with field engineering for review in VENDOR engineering drawings.
* Review/approve the VENDOR equipment electrical drawing, material specification & installation related to the tank cathodic protection (inside/outside) prior to release the foundation to the erection contractor.
* Review/approve the VENDOR painting / insulation material specifications & method of application.
* Verify/involve with CLIENT OPERATION department in order to ensure correlation of VENDOR tank design packages (instrument, civil & piping).
* Co-ordination with process, field engineering/design for any modification or field change occurs.
* Process P & ID conformity verification to ensure the fabrication/construction done as per project approved engineering.
* Effective co-ordination/involved with COMPANY's commissioning/operation department & end user for successful hand over/release the equipment to start-up.
* Respond to subcontractor regarding engineering clarification & deviations request.
* Review the weekly Shipment status received from Material Manager.
* Review directly with Material Manager the Urgent material required and inform Subcontractor about the ETA (estimated time arrival).

FABRICATION, SITE CONSTRUCTION SUPERVISION, QA/QC, HSE & PROJECT CONTROL.

* Pre inspection to the VENDOR materials/documents which are in receipt at our end in order to ensure conformity of fabrication done as per approved engineering & Project Specification.
* Review on daily basis the RIT summary issued by Subcontractor and has to witness the critical inspections together with QA/QC inspector.
* Responsible for the complete subcontractor shop fabrication, construction & erection or installation of equipments done conformity to the project specification.
* Responsible to monitor fabrication & site construction at site activities to ensure that works under supervision is performed as per project site regulations.
* Responsible to ensure that site works under supervision is performed in conformity to the project specifications and IFC drawings.
* Responsible to monitor the welding productivity, progressive NDT/NDE CONTROLS performed as per the project requirement.
* To issue NCR (Non Conformity Report) in case of any precede work not conformity to the project specification or approved drawing.
* Follow-up with Inspection department to take necessary action if the corrective action is not done immediately on site.
* To make sure that recording and tracking of all inspection on QCF (Quality Control Forms) is done correctly by subcontractor.
* Supervision to check the status of Handover documentation in Take-Over Xp (Handover software) and make sure that there is no backlog and that priority systems are closed.
* Follow up with subcontractors for timely closing punch items prior to release the equipment to pre ¨Ccommissioning.
* Responsible to review/comment the project required documentation, Quality Control plan (QCP), Method Statement (MSP), Inspection and Test Plan (ITP), Material Approval request (MTS), Lifting study/plan (STY) & NDT/NDE Procedures & Testing procedures, are issued and approved on time to not delay the work.
* Responsible to make sure that works under supervision is performed in respect of the safety rules & to take immediate action on site when ever unsafe situation is found.
* SAFETY MOTO/IMPLEMENTS: PROJECT HSE Specification compliance, 0' LTI, STARRT, UNSAFE OBSERVATION, TOOL BOX TALK, SAFETY FLYERS/FOSTERS, SAFETY WALK TROUGH, LPI.
* Supervision to make sure that Subcontractor is achieving the planned weekly progress.
* Verify & approve the Subcontractor weekly construction progress sheet (CPMS).
* Keep expedite with subcontractor in order to make sure that Subcontractor is always achieving the planned schedule/progress in line with.
* Review the approved level 2 schedule and make sure that actual trend will allow the completion on time of the relative activity
* Analyze the reasons of the delay and propose the corrective actions to subcontractor and to construction manager.
* Review 3 Weeks Look Ahead Schedule issued by Subcontractor and to make comments to Subcontractor.
* Preparation MOM of technical Meeting, weekly meeting & sub-contractor co-ordination meeting.
* Supervision to make sure that contractual issues have no impact on site progress or should report to subcontract manager if it is the case.
* To resolve & co-ordination with subcontract manager for any clarification raised by sub-contractor on the scope/contract issues.
Previous Employer: Olayan Descon Engineering & Industrial Co. (ODICO)
Company Profile:

ODICO is an ISO 9001:2000 certified & holding ASME U, U2, S, A & PP stamps along with the National Board's R stamp's evolve into multi-faceted company with in-house capabilities for engineering, equipment manufacturing (Pressure Vessels, columns, heat exchanger & storage tanks), plant construction & plant maintenance services.

Designation: Site Engineer (TANK Construction Unit )
(Line of reporting to Project Manager)
JOB RESPONSIBILITIES:

* W.O. scope study & estimation of bulk raw materials with equipment data sheets issued.
* Issue raw material requisition to procurement department.
* Effective co-ordination/interact with CLIENT/CONTRACTOR representatives for the successful hand over the equipments.
* Dealing with site CLIENT/CONTRACOTR for all the issues as a focal point to response.
* Prepare in house budget/Cost planning foreseen/control before the execution.
* As per contractually agreed project schedule, prepare and plan a project schedule to level II & I and obtain concurrence from internal sections/departments.
* Preparation/submission of project required documentations: Quality Control plan, Method Statement, Inspection and Test Plan, Material Approval request, Lifting study & testing procedures ensure are issued and approved on time to not delay the work.
* Preparation Project schedules on different planning software's, and getting progress data from different departments and incorporating in master schedule.
* Tracking, updating and monitoring the progress, & submit to client accordingly (Generating report: Daily,weekly/monthly reports).
* Follow up with PRODUCTION department for the timely delivery of prefabricated/fabricated material at site.
* Follow-up with LOGISTIC/JIGFIXURE departments for the necessary logistic support to the fabrication & site construction.
* Control/co-ordination with all departments for the various issues Site (supervision, HSE, QA/QC, Fabrication & cost control).
* Attend all the project site meetings & response to prepare MOM & send to H.O/ relevant departmental manager's further action.
* Attend weekly HSE STEERING meeting & explain about the level of project unsafe & LTI.
* Responsible for the complete fabrication, construction & erection or installation of equipments compliance/conformity to the client specification.
* Monitor fabrication & site construction productivity / task activities to ensure that works under supervision is going as per planned productivity.
* Responsible to monitor the welding productivity, progressive NDT/NDE CONTROLS performed as per the project requirement.
* Prepare P.O/Enquiry for the site subcontract jobs/support services (NDT & TESTING) & control/co-ordination with them for their availability/service timely at site.
* Effective co-ordination/involved with CLIENT's team for site day-to-day site activities.
* Provide construction daily work plan/ target/milestone sheets to every supervision, Preparation of look ahead for better control of the project.
* Prepare recovery plans in order to meet the project schedule. Submit the weekly progress CURVES between Plan and Actual progress and develop S-CURVE to have control on the project vigilantly. In case of slippage, take timely necessary actions to avoid delays.
* Plan out and procure the all required material in bulk quantity to control the budget.
* Prepare EYES FLASHPAGE and overall progress by PIE CHART for high management.
* Develop and maintain friendly environment among project team members.
* Arrange and conduct meeting/s (kick-off, site, in-house etc. and prepare their minutes and ensure the action on indicated items is taken on or before time.

Major Projects Handled at Olayan Descon

Following are the major Construction and Turn around Projects in which I have worked
Construction Projects:
1. Owner: Saudi Aramco (Khursaniyah Producing Facilities KPF)
Location: Khursaniyah,

Project scope includes Design, Supply, Fabrication and Erection of 11 Nos. of storage tanks for Khursaniyah Producing Facilities (KPF) (Fixed Dome Roof Tanks: API 650/API 620).

2. Owner: SABIC (SHARQ Expansion project & IBN ZAHR PP-¢ó Project)
Location: jubail
Project scope includes Design, Supply, Fabrication and Erection of 13 Nos. of storage tanks for SHARQ EG-III Expansion Project (Fixed Roof Tanks CS/ SS: API 650 & Shop Fabricated).

Also includes scope of Fabrication & Erection of 28 Nos. of pressure vessels (CS/SS) for SHARQ EG-III Expansion Project. (Vessel as per ASME SEC. VIII DIV. 1, "U" Stamp)
Project scope includes Design, Supply & Fabrication 2 Nos. Product Purge Bin for IBN ZAHR PP-¢ó Project (Vessel as per ASME SEC. VIII DIV. 1, "U" Stamp)

3. Owner: Gulf Farabi Petrochemical Co (N-Paraffin lab project)
Location: Jubail Industrial City,
Project scope includes Design, Supply, Fabrication and Erection of 28 Nos. of storage tanks for n-paraffin & LAB Project (12 IFR & 16 Fixed Roof Tanks: API 650).

4. Owner/Client: Saudi Aramco
Location: Rastanura
Project scope includes Design, Supply, Fabrication and Erection of 4 No. of storage tanks for SAUDI ARAMCO UPGRADE WWTP PLANT AT RASTANURA (IFR Tanks; API 650)

Previous Employer: Vijay Tanks & Vessels Ltd.

Company Profile:
Vijay Tanks & Vessels Ltd. (EPC) is an ISO 9001:2000 & ASME 'U' Stamp Holder Company involves in design, supply and installation of equipment like Pressure Vessels, Spheres, Atmospheric Storage Tank, Cryogenic Tanks(LNG), Heat Exchangers, Process Columns, Hydrogen Bullets, Process & Pressure Piping Having Head office in Baroda Gujarat and branches in Kuwait, Abu Dhabi(UAE), New Delhi, Mumbai, Jamnagar, Kandla.

Designation: Project Engineer / Project co-coordinator
(Line of reporting to Project Manager)
Job Responsibilities:
* W.O. scope study & estimation of bulk raw materials with equipment data sheets issued.
* Ensure/review the design & detailing for compliance to the client/project specification.
* Co-ordinate with design DRAFTING for the inputs / verifications.
* Dealing with CLIENT/CONTRACOTR for all the issues as a focal point to response.
* Requisitions for raw material requirements basically for plates and pipes by using nesting software.
* Preparation of project schedule using different planning tools. (Daily, weekly and monthly planning).
* Maintaining of minimum inventory levels for Consumables/Materials and requisitions for the same.
* Monitor fabrication & site construction productivity / task activities to ensure that works under supervision is going as per planned productivity.
* Co-ordination with all departments for the various issues (Site, QA/QC, Design/Engineering, Fabrication & cost control).
* Attend the project technical, kick-off, progress meeting & provide appropriate respond to the client.
* Dealing with contractors/client for day to day Site/Shop floor activities.
* Dealing with vendors for subcontracted jobs.
* Cost estimation for enquiry jobs related to fabrication part.

Major Projects Handled at Vijay Tanks & Vessels Ltd.

* Fabrication & Construction of SS Silos & SS, CS Tanks for IOCL- Panipat.

* Pre-fabricated 2 Nos. cone Roof High Speed Oil Unloading Tank (2.9 Mtrs. Dia. X 18 Mtrs.Lg) for General Diesel Storage Tanks. (Dia 45 Mtrs. X 15 Mtrs.Ht.) & 1 No. Fuel Unloading Tank for Bharath Electrical Company (BHEL) of Libya.

* Construction of Gas Boot & Pre-Fabrication of Storage Tanks for Shell International Exploration & Production B.V.

* Construction of SS DEA Regenerator Column for Ruwais Fertilizer Project, Abudhabi U.A.E.

* Pipe spool fabrication (90,000 ID, CS,SS & AS) at Kandla (Export Zone) for Ammonia plant for Burrup fertilizers, located at Karrata in Western Australia.

* Fabrication of Equipment (Coker Drum & Coker Fractionator) for DCU Package Unit (CDSP) FOR IOCL Panipat.

* Fabrication & Construction of Columns (Xyelene, Raffinated) & Adsorbent Chambers for PX2-Project of M/S. IOCL Panipat.

Codes & Standard Skills

* API 650, AP1 620
* ASME SEC. VIII, Div. 2
* ASTM STANDARS
* NFPA
* WORKED WITH CLIENT SPEC. (SAUDI ARAMCO, SABIC,TECHNIP, SAIPEM )
Engineering Software Skills

* Primavera P6 & P3.1 Project Management & Planning
* MS Project Scheduling
* LOTUS Notes
* AUTOCAD
* MS-OFFICE
Training
Program
Training Organization Location
ISO 9001: 2000 AWARENESS SEMINAR ABS GROUP, INC. SAUDI ARABIA
BASIC PAINTING TECHNOLOGY (APCS SYSTEM) HEMPEL SAUDI ARABIA
PLANT SAFETY ORIENTATION PROGRAM SAUDI ARAMCO SAUDI ARABIA

Personal Information
Date of Birth: July 03, 1981
Nationality/Religion: Indian / Christian.
Marital Status: Single
Languages: English, Hindi, Tamil & Malayalam.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 5451 to 5500 of 15478)

Go to Search Parameters...

Brief Description

Over 10 yrs working in petrochemical industries ,have good command in DCS and field jobs,done simulator debugging from japan,commissioned two plants in Iran and india.

•Knowledgeable in PLC troubleshooting ( Allen Bradley & Siemens Step 7, Omron and Keyence). •With experience in designing low voltage control systems. With experience in machine servicing and troubleshooting •Knowledgeable in Pneumatic & Electro-pneumatic system troubleshooting. •With background in

Geologist Based On Oil And Gas Platform

BE Instrumentation Looking for Automation Job

I have bachelors degree in chemical engineering from a reknown university in Nigeria, Africa. I have a strong working experience background from an oil and gas company in Nigeria where I was trained to be proficient in equipment sizing, use of hysys, FEED, basic and detailed engineering, etc.

MSc. Geology & 2.5 years experience in Chilean Cu-Mo deposits, Archean Au deposits, Archean greeenstone belts, Appalachian geology. Geochemistry, petrology, and mapping. Looking for equal opportunity employment (female/visible minority) in a historically male dominanted profession.

Piping engg with 4 yrs knowledge of pdms administrator

two yr exp in site acquisition feild

Geolgist having 2 year experience in construction

I, Naitik Shah , a recent graduate from University of Florida did my Master¡¦s of Science in Industrial & Systems Engineering. I am interested in exploring opportunities with your company in the area of Industrial Engg where I can utilize my Masters education and relevant internship experience.

11 years of experience in Material

Joined FOCUS ENERGY LIMITED AS G.T.E in OIL & GAS EXPLORATION Division on their DEEP DRILLING RIG ZJ 70, JC 40 in the Rajasthan area at Jaisalmer.

Energetic, degreed and experienced Safety Professional seeking expat position in E/P field. I am well versed in driving down incident rates and educationg the work force. I am a firm believer in delivering required HSE training, coaching and monitoring results. I believe in accountability of each wo

Since Sep 2006, Well Site Geology and Mudlogging

from last 5 years working as protection engineer in high voltage AC.

Highly motivated person that has had the chance to work both independently and in teams in various industries. Education-related experience has included research in a lab environment that has enabled me to gain in depth knowledge in the area of Mercury Intrusion Capillary Pressure (MICP) analysis a

More than 15 years experience as a Commercial Manager, Contract Administrator and Quantity Surveyor working with Main Contractors and Consultants in the U.K, Middle East, Caribbean and South East Asia on a variety of Building, Oil & Gas, Civil, Power and major infrastructure projects.

Instrument engineer with experience on EPC projects and CMMS activities

Having 5 years of Professional Experience

A business development professional with skills in strategic management,project management,communication and public relations,negotiating skills.

5 years exp in sour gas/crude processing plant Kuwait. (Operations, commissioning)

12 years experience in industrial and general maintenance field.

Design and construction in bridge and road

Strong analytical skills and knowledge of business practices, Ability to collect and document business requirements, Report Tools (Business Object, Report Developer etc), Relational Database Design and Development including Advance Stored Procedure, Function, Triger, cursor Procesing etc, Data Model

Nine years experienced and motivated open cut production/planning engineer to secure a position in a mining company with considerable advancement opportunities

Materials & logistics coordinator with 10 years of hands-on experience in Oil and Gas industry supporting offshore drilling, production, workover operations in CIS countries. Strong knowledge of warehousing; land, air, sea transportation; rigging and lifting; understanding of drilling operations.

10 years experience in, Gulf of Suez Petroleum Company the joint venture partner with BP in Egypt.

Mechanical Engineer: 12 years experience in project management & administration of highly complex industrial projects. Design, estimation, planning, scheduling, inspections and expediting. Team builder with outstanding results in conflict handling, excellent overall program leadership.

Drilling Engineer / TourPusher

8 yers experiance safety officer

DIPLOMA IN MECHANICAL ENGINEERING

D.A.E in Electronics and from last 7 years i am working in the field of CCTV & SECURITY SYSTEM as a SUB ENGINNIER +SALES ENGINNIER IN SAUDI ARABIA

B.Sc. in Civil Engineering from BUET, Dhaka, Bangladesh having 10 years of experiences as a practicing engineer particularly with consulting and construction works. working experience with national and international consultants.worked in Road,bridge,subsoil investion an glycol gas plant project

Experienced in drafting commercial buildings, residential for permit processing and for shop drawing.

Electrical/Instrument Construction-Field Eng, 25yrs+ on/offshore oil & gas project experience.

I am seeking a position as a Medic where my skills, previous experiences and currant safety training will provide your company with a professional medical service. The attached resume details my 24 plus years of military and offshore experience.

Structural engineer

I am a mechanical engineer with 10 years experience in Material handling, Steel structurals, PEB, Steel buildings industries

Architect/landscape designer/graphics person

A successful HSE Advisor and Coach with 3-years exp. in oil/gas industry on-shore. Excellent communication, negotiation, interpretational and interpersonal skills with strong safety ethics.

I have 12 years experience in base metals, precious metals (gold and silver), platinum group metals, iron and steel processing. The plants that I have experience with encompassed ore transportation, crushing and screening, milling and gravity separation and classification, flotation, gold extraction

Project Control Engineer (Planning, Claims and Cost Control)

Qualification: Bachelor of Science geology,(Hons) Computer skill, computer logging unit,, well site engineer drilling and logging, geological samplings, oil and gas evaluation interpretation and correlation of type of logs, daily preparation of reports, stratigraphic correlations

Skills in performing safety inspections and ensuring compliance with OSHA safety standards. Excellent ability to develop, implement, and enforce safety programs and protocols. Strong ability to gather data, compile information, and prepare reports.

6+ yrs. experienced in Tankage Mech. Fabrication & Construction Engineering

For more than twelve years of work experience locally and internationally, I have widened my carreer path especially in the field of administration, human resource, technical assistance and information technology in a multi-national company, especially petro-chem const.,oil & gas plant maint.

6 years from Military with lots of surveying .

I am a AWS-CWI (Certified Welding Inspector) with ASNT Level-II Certificate (RT, UT, MPT, LPT) and BGAS-CSWIP GRDAE-II. I have 6 experience. Three year experience in offshore project and three year onshore project.welding inspection and Quality control experience in reputed companies like Hyundai

Instrumentation engineer.Have been working with various companies viz ABB,EMERSON etc in Installation, commissioning ,after sales support,Project management etc.Specialised ANALYSER ENGINEER.

With both a Master Degree in Geosciences and a Specialized Master in Corporate Finance, I benefit from complementary competencies which enable me to combine my technical and financial knowledge on mining projects.

First Prev 101 102 103 104 105 106 107 108 109 [ 110 ] 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 Next Last

Seach Parameters


Goto Advanced Search...
Keywords: (e.g. mining engineer)		Find results with:

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out