Misco Jobs
|
Go to Job Seeker's Center »»
|
«« previous resume
Resume #78735
next resume »»
CONTACT INFORMATION:
View contact information...
Objective To pursue a fulfilling and dynamic career in fields of civil works.
Experience
Date
Employer
October 18, 2007 to Present
Consortium Japonais pour l'Autoroute Algérienne ("COJAAL") - under HAZAMA CORPORATION
Project: Constantine Algeria Autoroute Project - Section 5 Construction de l'Autoroute Est/Quest du lot Unique Est,
Project Description: The project covers the construction of a 13.14 km. of expressway. It also includes 200 linear meter of tunnel, viaduct, 3 bridges, underpasses, overpasses. RCBC's and RCPC's.
Position: Senior Civil Engineer (Roads and drainage)
(km 187+003.312 to km 200+143.284)
Responsibilities:
 Overall in charge in the construction of all roads, gabion works, stone masonry works, slope protection works and drainage structures.
 Check drawings for proper implementation
 Plans construction program
 Monitors and supervise site engineers with regards to construction activities in order to assure that interim goals are understood and met
 Monitors materials requirement and work done.
 Prepares take-off/measurement of quantities, costing and scheduling
 Checks billing reports and necessary attachments and evaluation of sub-contractors billing report
 Evaluates, selects and applies standard construction engineering techniques, procedures and criterias using judgement based on all applicable codes, specifications and engineering information in making decisions
 Coordinates with the consultant and client.
April 10, 2007 to October 12, 2007
HAZAMA-TAISEI-NIPPON STEEl Joint Venture
Project: SUBIC-CLARK-TARLAC Expressway Project
(Package 2), Clark-Tarlac Section
Project Description: The project covers the construction of a 40.20 km. of expressway that starts at Clark Angeles and ends at Tarlac. It also includes major interchanges, underpasses, minor bridges, major bridges, RCBC's and RCPC's.
Position: CONSTRUCTION MANAGER
(Zone 2- km12+800 to km 25+486)
Responsibilities:
 Overall in charge in the construction of all concrete structures, gabion works, stone masonry works, slope protection works and drainage structures.
 Checked drawings for proper implementation
 Planned construction program
 Monitored and supervised site engineers with regards to construction activities in order to assure that interim goals are understood and met
 Monitored materials requirement and work done.
 Prepared take-off/measurement of quantities, costing and scheduling
 Checked billing reports and necessary attachments and evaluation of sub-contractors billing report
 Evaluated, selected and applied standard construction engineering techniques, procedures and criterias using judgement based on all applicable codes, specifications and engineering information in making decisions
 Prepared accomplishment reports and innovated monitoring procedures for the benefit of the project
 Coordinated with the consultant and sub-contractors
March 30, 2005 to April 04, 2007
TAISEI-SHIMIZU Joint Venture
Project: New Iloilo Airport Development Project
Sta. Barbara-Cabatuan
ILOILO, Philippines
Project Description: The project covers the construction of Iloilo Airport that includes;
1. Runway = 2.5 km x 45 m
2. Apron = 48,000 sq.m.
3. Access road = 3.0 km x 30 m
4. Passenger Terminal Building = 12,000 sq.m.
5. Cargo Terminal Building = 1,281 sq.m.
6. Administration Building = 960 sq.m.
7. Control Tower = 35 meter high
8. Central Plant Building = 2,600 sq.m.
9. Maintenance bldg. and Equipment = 657 sq.m.
10. Crash Fire Rescue Station and Equipment
11. Air Navigation System
12. Airport Utilities
13. Underground Structures
Position: Senior Site Engineer/ Asphalt Plant Engineer
Responsibilities:
 Overall in charge in the construction of underground concrete structures such as Underground Service Link (960 meters), Six (6) units of reinforced concrete box culverts with a total length of 300 meters, Ductlines, Trapezoidal Grouted Riprap. U-ditch, Fuel Tank Separator, Slotted Drain, Regulating Pond with an area of more than 6 hectares and Sewage Treatment Plant that includes seven (7) major structures such as Pump Station, Sludge Drying Bed, Disinfection Tank, Sludge Thickener, Regulation Tank, Final Clarifier and Oxidation Ditch.
 Supervised Asphalt Plant Operation and Maintenance
 Supervised Embankment and Pavement Works
 Checked drawings for proper implementation
 Planned construction schedule
 Supervised construction activities in order to assure that interim goals are understood and met
 Monitored materials requirement and work done
 Made drawings for some proposals/ modification of drawings
 Prepared take-off/measurement of quantities, costing and scheduling
 Prepared billing reports and necessary attachments and evaluation of sub-contractors billing report
 Evaluated, selected and applied standard construction engineering techniques, procedures and criterias using judgement based on all applicable codes, specifications and engineering information in making decisions
 Prepared accomplishment reports and innovated monitoring procedures for the benefit of the project
 Coordinated with the consultant and sub-contractors regarding problems that may occur on site.
August 2004 TO February 2005
Position: Civil Engineer (Private Practice)
Limay, Bataan
 Construction of three (3) Bedroom Residence owned by Engineer Eric S. Cortez located at Barangay Townsite, Limay. Bataan
May 20, 2003 to February 6, 2004
V.P. Roque Construction Corporation
Project: Hermosa Ecozone Industrial Park (HEIP)
Phase 1A, Partial Development Project
Barangay Palihan, Hermosa Bataan
Project Description: The project covers site grading of 10.60 hectares land (part of 550 hectare land) and construction of access road, reinforced concrete retaining wall, stone masonry retaining wall, fencing, slope protection, storm drainage protection (RC pipes) with catch inlet manholes and drainage manholes.
Position: Project Engineer
Responsibilities:
 Overall in charge in the construction
 Checked drawings for proper implementation
 Planned construction program
 Supervised construction activities in order to assure that interim goals are understood and met
 Monitored materials requirement and work done.
 Prepared take-off/measurement of quantities, costing and scheduling
 Prepared billing reports and necessary attachments and evaluation of sub-contractors billing report
 Evaluated, selected and applied standard construction engineering techniques, procedures and criterias using judgement based on all applicable codes, specifications and engineering information in making decisions
 Prepared accomplishment reports and innovated monitoring procedures for the benefit of the project
April 01, 2002 to May 19,2003
Position: Civil Engineer (Private Practice)
Limay, Bataan
List of projects handled:
 Construction of Four(4) Bedroom Residence owned by Mr, Mario T. Cruz located at Tucop, Dinalupihan, Bataan
 Construction of Aloha Highway Resthouse owned by Mr. Mario T. Cruz located at Roman Superhighway, Limay, Bataan
 Construction of 2-storey apartment owned by Mr. Mario T. Cruz located at Barangay Reformista, Limay, Bataan
 Construction of 2-storey residential building owned by Mr. and Mrs. Rancy Calma located at Emerald Village, Limay Bataan
 Construction of Three(3) Bedroom Residence owned by Mr. Rolando G. Cortez
Responsibilities:
 Overall in charge in the construction
 Monitored material requirements
 Supervised construction activities in order to assure that interim goals are understood and met
 Checked drawings for proper implementation
 Checked proper workmanship
 Checked drawings for change order
 Made drawings for some proposals/ modification of drawings
 Planned construction program
September 18,1995 to March 31, 2002
Municipal Engineer's Office
Municipality of Limay
Province of Bataan
Position: Planning/ Civil Engineer
Responsibilities:
 Prepared quantity take-off costing and scheduling including direct supervision to various works in field construction
 Planned construction program
 Prepared and updated master construction schedule
 Monitored and reported weekly/ monthly progress and ensured work progress meet planned schedule
 Prepared accomplishment reports and evaluated contractors billing documents
 Coordinated with the contractor regarding alteration, addition, omission in the plans and made that materials meet the required strength, quality and brand through testing and material specification
 Responsible for providing construction engineering and technical support to field construction..
December 12, 1994 to September 15, 1995
ERE Construction
Project: Periodic Maintenance of Gapan-San Fernando-Olongapo Road, Dinalupihan Section Region III
Position: Road/ Quantity Engineer
Responsibilities:
 Prepared take-off/measurement of quantities, costing and scheduling including direct supervision to various works in field construction
 Monitored materials requirement and work done
 Prepared billing reports and necessary attachments and evaluation of sub-contractors billing report
 Evaluated, selected and applied standard construction engineering techniques, procedure and criteria using judgement based on all applicable codes, specifications and engineering information in making decisions
 Prepared accomplishment reports and innovated monitoring procedures for the benefit of the project
 Performed tender drawings and as-built drawings for final billing
 Conducted field survey works in determining quantities and layout of the road, canals, culverts and others.
Jan. 31, 1994 to Nov 30, 1994
DCCD Engineering Corporation Project: Small Island Project, Siargao Island, Dapa Surigao Del Norte
Position: Civil Engineer
Project Description: The project covers the construction of 200 km. Feeder road and 53 units RC Pipe Culverts within the island and 8 timber bridges.
Responsibilities:
 Prepared take-off/measurement of quantities, costing and scheduling including direct supervision to various works in field construction
 Monitored materials requirement and work done
 Evaluated, selected and applied standard construction engineering techniques, procedure and criteria using judgement based on all applicable codes, specifications and engineering information in making decisions
 Prepared accomplishment reports and innovated monitoring procedures for the benefit of the project
 Performed tender drawings and as-built drawings for final billing
 Conducted field inspection to ascertain status and progress of the project
 Performed other technical assignments assigned by the Resident Engineer
 Attended weekly coordination meeting with the client with regards to variation
April 01, 1992 to January 30, 1994
DCCD Engineering Corporation in association with Nippon Engineering Consultants Co., Ltd.; De Leuw Cather International Ltd., DEMCOR Inc. and Katahira & Engineers International.
Project: South Luzon Expressway Extension Km 59+950 – Km. 64-540, Package 1A, Province of Batangas.
Position: Civil Engineer
Project Description: The project covers the construction of a 4.59 kilometers of expressway that starts at Sto. Tomas and ends at Sambat, Tanauan, Batangas. It also includes a major interchange, 2 overpasses and 1 steel bridge. The project amounting to P258M was funded by OECF.
Responsibilities:
 Prepared take-off/measurement of quantities, costing and scheduling including direct supervision to various works in field construction
 Monitored materials requirement and work done
 Evaluated, selected and applied standard construction engineering techniques, procedure and criteria using judgement based on all applicable codes, specifications and engineering information in making decisions
 Prepared accomplishment reports and innovated monitoring procedures for the benefit of the project
 Performed tender drawings and as-built drawings for final billing
 Conducted field inspection to ascertain status and progress of the project
 Prepared progress accomplishment report and billings
 Attended weekly coordination meeting with the client with regards to variation
 Performed other technical assignments assigned by the Resident Engineer.
 Responsible for keeping Resident Engineer informed as to progress of the work and the manner it is being done.
January 20, 1992 to March 31, 1992
DCCD Engineering Corporation in association with Nippon Engineering Consultants Co., Ltd.; De Leuw Cather International Ltd.; DEMCOR Inc. and Katahira & Engineers International
Project: Engineer's Facilities for South Luzon Expressway Extension, Package 1A, Province of Batangas
Position: Civil Engineer
Project Description: The project covers the construction of Field Office, Laboratory Office, Staff Quarters and Site Development that includes construction of water tank, fencing, construction of Basketball Court and Landscaping.
Responsibilities:
 Prepared take-off/measurement of quantities, costing and scheduling including direct supervision to various works in field construction
 Monitored materials requirement and work done
 Prepared billing reports and necessary attachments and evaluation of sub-contractors billing report
 Evaluated, selected and applied standard construction engineering techniques, procedure and criteria using judgement based on all applicable codes, specifications and engineering information in making decisions
 Prepared accomplishment reports and innovated monitoring procedures for the benefit of the project
 Performed tender drawings and as-built drawings for final billing
 Conducted field inspection to ascertain status and progress of the project
 Supervised and checked works of the contractor and its operation as per plan and specifications
 Performed other technical assignments assigned by the Resident Engineer.
September 16, 1991 to January 19, 1992
DCCD Engineering Corporation in association with Nippon Engineering Consultants Co.Ltd.
Project: Northern Part of Circumferential Road 5 (C-5) Development Project (Pasig to McArthur Highway)
Position: Civil/ Highway Engineer
Project Description: The project covers the Detailed Engineering Design of 24 kilometer multilane divided urban highway. The project was funded by OECF.
Responsibilities:
 Participated in plans checking, drafting of contract documents and project specifications
 Prepared Unit Price Analysis (UPA) of various items of work that included researching and canvassing of labor and materials
 Responsible in the design of all Traffic Guide signs.
 Prepared Traffic Layout
 Participated in field works from gathering of pertinent data up to verification of proposed alternative alignment
 Supervised the survey activities to ensure proper execution
 Checked field stakeouts, computations, plotting of plan and profiles, and other topographic plans
 Assisted in the preparation of vertical and horizontal design
 Assisted in the preparation of monthly progress report
 Prepared quantity take off with regards to roadway excavation, embankment, clearing and grubbing, sub-grade preparation, earth berm, sub-base materials, base course, pavement and take off for the Staff Quarters, Laboratory and Office Building.
January 16, 1991 to September 15, 1991
DCCD Engineering Corporation
Project: Construction supervision of the Rehabilitation of roads, bridges, Flood Control Structures and Buildings damaged by the July 16, 1990 Earthquake
Position: Civil Engineer
August 9, 1990 to January 15, 1991
DCCD Engineering Corporation in association with PHILNOR Consultants and Planners and PERTCONSULT Inc. Consultants Co., Ltd.
Project: Detailed Engineering Design of South Luzon Expressway Extension Project (Province of Batangas)
Position: Civil/ Highway Engineer
Project Description: The project covers the Detailed Engineering Design of 42 kilometers of expressway that starts from Sto. Tomas and ends at Batangas City. It also includes three (3) major interchanges, bridges and overpasses.
NCD Construction and Trucking
Position: Project Engineer
Project Description:
- Construction of (ABB) Asea Brown Boveri Housing and facilities that includes roads, drainage system, swimming pool, tennis court, basketball court and multi-purpose building located at Alangan Heights, Limay, Bataan
Education
 Limay Elementary School
Limay, Bataan
(1974-1980) Graduate
 Limay Municipal High School
Limay, Bataan
(1980-1984) Graduate
 Mapua Institute of Technology
Intramuros, Manila
Bachelor of Science in Civil Engineering
(1984-1989) Graduate
 Bachelor of Science in Environmental & Sanitary Engineering
1st Semester 1989-1990 (13 Units)
Skills/ Interests Computer literate, Drafting, Surveying, playing basketball, billiard and bowling
Professional Affiliation:
Philippine Institute of Civil Engineers
Registered Civil Engineer
Personal Data
Birthday: March 18, 1968
Birthplace: Limay, Bataan
Nationality: Filipino
Sex: Male
Civil Status: Married
Height: 1.76 m
Weight: 80 kgs.
Religion: Roman Catholic
View contact information...
«« previous resume
next resume »»
Search Results (Resumes 251 to 300 of 15477)
Go to Search Parameters...
Brief Description
Senior geologist with 19 years experience ranging from field mapping, prospect evaluation, and drill program design and execution, to data management, resource modeling, target generation, supervision, QA-QC, budgeting, community relations, technical communications, and corporate representation.
Architect, architectural CAD drafter/designer historic preservation specialist
Administration & Finance Specialist in Most Fields of Oil & Gas Industry
With over 28-years of procurement and logistics related experience in the Oil & Gas (Domestic, International Field and Office). Well respected by service and supply companies worldwide, I am currently seeking a challenging position in an international company. Whereby, I can utilize, enhance, and co
Piping Stress Oil/Gas, Off/Onshore, FPSO's and Nuclear - Caesar,Autopipe and PSA5
A committed and professional with over 27 years of progressive and varied experience in the field of Mechanical Engineering in the areas of Operations, Maintenance & Inspection of Petrochemical, Oil and Gas Equipments, Marine equipment. Expediting of equipment for oil and gas industry
I am a positioning specialist/navigator with over 19yrs post qualification experience. I have worked in various countries including USA, Saudi Arabia, Nigeria, Chad, Egypt, and UAE. I am experience in both marine, land, desert operations seismic surveys. I have also worked as a consultant client rep
Highly competent contracts administrator with extensive experience administering multi-million-dollar-dollar contacts for major projects in the power sector. Expertise includes managing pre-award contract management as well as post bid contract management incl. expediting.
I am Petroleum Geologist with +20 years experience in subsurface projects. These experiences cover mostly production geology, drilling operations and a few exploration projects. I was also involved in heavy oil projects, including drilling operations, well geostering and geocelular 3D geologic model
- Coordinating services e.g. directional drilling, fishing, drilling tools, liner hangers, packers, cementing, stimulation, wire line, geology, gyro survey, electro logging, etc. - Implementation of logging operations and witnessing the same. - Monitoring well profiles as per requirements (both Ge
Experience 14 years in Refineries (Fuels & Lube) as a Process Engineer to Technical Services Manager in India. 9 years in KNPC as a Process Design Engineer, in Project Department, implemented minor and major projects in 3 Refineries. 3 years in EPC Company, Canada, Designed SAGD utilities and SRU.
B.Sc. in Petroleum Engineering, 28 years work experience whereof 16 years in drilling supervision and operations, 4 years drilling engineering and planning.
Rigging & Lifting Specialist
Worked on onshore Oil collection & processing plants, Gas Plants, Offshore Platforms & FPSO during pre-commissioning and commissioning levels.
Over 30 years experience in Oil and Gas Petrochemical Industries onshore and offshore in the UK and overseas. Experience gained on various onshore projects, i.e. Power Plants, Chemical Plants, Pumping Stations, Alumina Plant, and Petrochemical Refineries ;BSc Mech. Eng..
Civil engineer with 25 years of diverse expeience with 16 years in L&T ECC.Have also worked with leading companies like ITCand RELIANCE
More then 20 years exp in Manager operation & maintance
Free!
I am an International Sr. Well Engineer with a wealth of worldwide experience and knowledge. I have a Petroleum Engineering degree and 27 years in the industry. I want to continue to contribute to the technological challenges of the energy arena, particularly offshore, subsea and deepwater.
Over 25 years of international oil/gas industry experience as a professional Geologist, I worked on Africa, Middle East, Canada, North Sea, India, Kazakhstan, Trinidad & others. Proven track record in geological exploration & development venues: prospect generation, new ventures andplay fairway
Marketing Leader
Qualification : B.Sc. Accounting and MBA Accounting and Finance. Experience : 18+ years experience in contracts and procurement (C&P) for oil and gas industry. Manages and executes all steps of the contracting processes, i.e tenderings to contract closures.
Im a civil engineer working for more than 19 years in all fields of civil works. All I can say is I love my job very much and Im sure tha I will be an asset of your company.
Drilling exploration production, per cv below
B.E. (Mechanical) - 1980
Petroleum Engineer with 26 years of professional experience mostly in Production Engineering. Spanish and English fluent speaker. Artificial lift, workover and well service recommendations. Well Completion programs. Well testing. Field Evaluation and Production Optimization.
Software Development Manager
30 + year mud engineer, experienced in all phases of drilling fluids & BOP.
I am a first Class Chemical Engineering Graduate, having about 21 years experience in Oil & Gas, Petrochemical and Fertilizers industries in the areas of Process Design, Process Operation, Technical Services, Projects and Plant Commissioning is now looking for a location change.
I have more than 17 years experience in exploration and development domains. During my career, I have explored for hydrocarbon in the Algeria sedimentary basins. North Sea Norwegian sector, Libya and now I`m working in Canada for Fugro-jason.
Having more than 25 years of experience in the field of operations of utilities,main process in oil and gas,petrochemical,fertiliser plants.Can lead a team of commissioning engineers in start up and commissioning activities.
I AM BIO MEDICAL ENGINEER WORKING WITH NEWLY CONTRUCTED HOSPITAL IN RIYADH I HAVE 20 YEARS EXPERIENCE
Document Control and Records Management, Contracts Management, Supervisory and organisational skills, independent worker. Computer literate. Experienced at startup of new sites.
SMALL CONSTRUCTION COMPANY PRESIDENT LOOKING FOR NEW CHALLENGE, GENERAL CONTRACTOR SINCE 1981, ESTIMATING, ACCOUNTING, HANDS ON MANAGEMENT OF PROJECTS AND SUPERVISION OF ARCHITECTS AND ENGINEERS.
Twenty years of progressive Operations and Supply Chain Management Experience in manufacturing, distribution and service industries. Experience is inclusive of development and implementation of Lean Thinking concepts within the Procurement and Inventory Control areas for zero based inventory replen
23 YEARS EXPERIENCE IN PETROCHEMICALS -PROJECT , OPERATIONS ,ERECTION ,COMMISSIONING
Senior Executive with over 30 years experience in the Oil & Gas industry.
Seasoned and versatile process engineer (Oil & Gas, Refining) seeking a Process Engineering position that utilizes my analytical and communication skills to enhance organizational growth and profitability.
I have over 15 years experience in heavy industry and construction and strong skills in managing time and controlling cost on projects from design to start up and operation.
Project management, Coordination with clients/vendors/consultants/contractors, site supervision, prepare tender documents/ costing/ estimating/ review of procedures, ensure safety and quality at site, material procurement, progress monitoring, heavy equipment transportation& erection
Professional Experience Government Procurement
Over 20 years as an experienced accountant responsible for financial statements and all aspects of the general ledger. I have worked with in house accounting systems and Quickbooks.
(Lead/Senior) Cost Engineer/Cost Controller/Cost Specialist
Professional API 510 and AWS CWI Inspector
With thirty years experience in the workforce in industries such as oil & gas, mining, fabrication/construction, and marine engineering, I have a very strong mechanical aptitude in all disciplines and a strong commitment for OHSE having started with my apprenticeship as a Mechanical fitter/1st class
My strong background is in the reservoir characterization in both clastic and carbonate geology, well planning and execution, tar characterization, operations geology, and geosteering. Expert in Landmark geological softwares OpenWorks, Stratworks and reservoir mapping using Z-Map Plus.
Petrophysicist
Over 15 years of experience in Instrumentation Engineering, Procurement, Construction, pre-Commissioning and commissioning of projects
Document Controller with 10 years experience in Oil & Gas industry
Engineer / Consultant for Civil, Water Resources, Irrigation, Dam, Canal, Dam safety, Storm water Drainage, Flood Management, Lake & river revitalization, Procurement, Training Specialist
Expert in aluminum smelting, mainly Potline and Casthouse, start-ups, production, process
First
1
2
3
4
5
[ 6 ]
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Next
Last
Seach Parameters
Goto Advanced Search...
Keywords:
(e.g. mining engineer)
Find results with:
ANY of the words
ALL of the words
WITHOUT the words
Frequently Asked Questions
What's the most effective way to perform a search?
Go to
Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.
How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".
More Frequenly Asked Questions...
Employer's Center
»
Employers Home
»
Feedback
»
Help
»
Post Jobs
»
Edit/Delete Jobs
»
Search Resumes
»
Resumes By Email
»
My Account
»
Log In
»
Log Out
©1999-2009 Misco Jobs. All rights reserved. Contact:
support@miscojobs.com