Resume - I have extensive experience in Cu/Mo/Au Concentrators working in the US and Chil...

Misco Jobs

Resume #78761

CONTACT INFORMATION:
View contact information...

Personal Data

Born in Inca de Oro, Chile on February 18, 1966
Permanent US Residency (Green Card) Status since 1991 (Chilean citizenship)
Fluent in English, Spanish and Portuguese

Education

1995 - 1998 BS in Mineral Engineering, New Mexico School of Mines, Socorro, New Mexico

1991 – 1994 St. Petersburg Jr. College, Clearwater, FL with studies in English language and basic studies.
1985 - 1987 University of Atacama, in Copiapó, Metallurgical Engineering program, (not completed)

1981 - 1984 High School and studies in Mineral Processing completed at Escuela Técnico Profesional (a department of the University of Atacama in Copiapó, Chile)

Professional Experience

February 2008- Present: Manager Metallurgical/Process Projects, Quadra Mining Ltda

I am responsible of process/metallurgy projects with the Corporate Engineering Team. I'm in charge of leading two Scoping and Pre-feasibility studies for our future process plants, (concentrator and SX-EW), one in Northern Chile and the other in Greenland. Also I lead continuous improvements projects at our operating Concentrator with direct interaction with mill manager and Superintendents. My job duties include leading consultants on Geometallurgical, Scoping, and pre-feasibility studies as well as specific site projects, like Concentrate grade improvement, gold recovery improvement and application of new technologies.

November 2007- February 2008: Concentrator Technical Superintendent, Freeport- MacMoran, Morenci Concentrator

I am responsible of safely leading a team of Metallurgical Engineers, Process Control Superintendent, Process Control Engineers and Technicians in the technical Services Dept. I was responsible for all concentrator technical aspects, production/cost budgets and forecasting, process monitoring and optimization. I am also responsible for all process control activities in the concentrator. This team works with expert systems to further optimize plant performance. Our team has improved overall mill throughput by 10% in the last 6 months by using neural networking system to self adapt to plant conditions.

Jan 2006-November 2007: Concentrator Operations Superintendent, Freeport- McMoran Morenci Concentrator

I was part of the start-up team of the Morenci Concentrator. Participate in multidisciplinary focus/project groups to solve plant-operating problems. Train new employees in the diverse operations units. In charge of safely leading 8 Shift Supervisors, 3 area supervisors, 1 labor supervisor and 115 hourly personnel to safely meet production and quality goals in a 1942 built, 72,000 TPD conventional ball mill/spiral classifier mill. Also in charge of cost/production budget/forecast for the Operating team. I'm in charge of process improvements teams and Concentrator leadership team.

Jan 2005-Jan 2006: Concentrator Operations General Supervisor, Phelps Dodge Chino Mines

In charge of safely leading 5 Supervisors, (4 Operating crews, 4 Control Room supervisors) to meet production and quality goals in a 43,000 TPD conventional plant with SAG, ball mill and Tower mills.

April 2004-Dec 2004: Senior Concentrator Metallurgist/Fill –in for Operations Superintendent, Phelps Dodge Chino Mines Company, USA

I was part of the start-up team of Chino Mines Concentrator. Supervise flotation unit operation contractors, testing, troubleshooting during re-start of operations of the 43,000 tpd copper concentrator. Participate in multidisciplinary focus/project groups to solve plant-operating problems. Train new employees in the diverse operations units.

When filling-in for Mill Operations Superintendent in charge of safely leading 8 Supervisors, ( 6 Operating crews, 6 Control Room supervisors) and one Process Control Engineer to meet production and quality goals.

December 2003-April 2004: Mine-to-Mill Ore Production Coordinator, Phelps Dodge Minera Candelaria Chile

Work was focused on safety and production goals for the mine and the mill. I was in charge of a team of three engineers developing production strategies to maximize throughput at the mine and mill. Mine planning, blast designs, SAG mill KPI´s were analyzed daily performance to increase throughput from an average of 65,000 tpd to 70,000 tpd milled.

December 2001 – December 2003: Senior Metallurgist/Chief Engineer Phelps Dodge Minera Candelaria Chile

Worked in a 70,000 tpd wrap-around SAG and conventional Ball mill concentrator with state-of-the-art equipment. Main work was focused on safely coordinating/leading a team of three Metallurgists and four Techs working on flotation, thickeners and filter plant optimization, concentrator costs, budgets, forecasting, metals inventories, and the development of a low pH reagent scheme for the flotation plant and increase in concentrate grade. Work also includes technical support to day-to-day plant operators. Other work includes tuning the Knowledge cape adaptive optimization and expert control system on rougher, cleaners and scavenger flotation areas. Developing flotation expert system in conjunction with Process control Engineers and the successful implementation of wash water system on column cells to increase concentrate grade from 29.5% to 31% Cu.

May 2001 – December 2001: Smelter Senior Process Engineer, Phelps Dodge Chino Mines Company

Position involves learning the converter/flash furnace processes. Main focus of daily work includes optimization of converters and general daily operating situations.

April - August 2001: Senior Metallurgist, Compañia Contractual Minera Candelaria Chile

On-going mill optimizations work at Phelps Dodge's Candelaria concentrator in Chile. I worked in implementing/tuning the Knowledgescape adaptive optimization and expert control system on SAG mills, ball mills and flotation. Also de project involves control room/shift supervisors training of the new rules/optimizers.

1998 – 2001: Concentrator Metallurgist, Phelps Dodge Chino Mines Company

Work in Concentrator Metallurgical Department at a 48,000 TPD conventional plant with SAG, ball mill and Tower mills. Supervise flotation testing using new reagent blends in order to investigate impact on product grades and recoveries. Solve daily metallurgical upsets at the grinding and flotation plant. Work at optimizing tailing thickeners by training and implementing control tests of the E-Duc system. Calibrate the X-ray analyzer (Outokumpu Courier C-30XP) and upgrade equations using Outocal software. Work with process control Engineer to optimize expert control used in grinding and flotation. Other experience includes working with: Knowledgescape optimizer and predictors; G-2 expert system for grinding and flotation; ABB DCS system; and using SPLIT software for SAG throughput feed size distribution. Coach/supervise met lab sampler's team. Participate in multidisciplinary focus/project groups to solve plant-operating problems.

Training

Phelps Dodge Supervisor Development Program, Leader Manager Seminar, Social Styles Training, Tailing Design Class, Brio training, METALS, Performance Partnering Process (PPP), some JKSimMet, MIMS user training, Stress Management Class, Move Smart, Ellipse, Resetting the Safety Culture.

Prior Employment

1995 –1998: Lab Assistant in Mineral Dept. at New Mexico Tech Quantitative Mineralogy Lab

Analysis of rock and heavy mineral concentrate samples from porphyry Cu-Mo and epithermal Au-Ag deposits using petrography techniques.

January - May 1997: Surveying Teacher Assistant in Mineral Dept. at New Mexico Tech Mine surveying Lab
Assisted the professor with the surveying class. Prepared the class and equipment for the necessary exercises given to Mining Engineering students
May – August 1998: Metallurgical Engineer (summer employment) Cyprus Bagdad Copper Corporation

Worked in Mill Technical Services, performed flotation test using new collectors in order to investigate impact on products grades and recoveries. Worked with performance teams on routine plant upsets at the Moly plant. Calibrated the X-ray analyzer (Outokumpu Courier C-30) for new streams using Outocal software. Performed flotation tests of smelter slag to study impact on plant recovery and milling characteristics. Worked on capital projects for future mill expansion.

May – August 1997: Mining Engineer (summer employment) Phelps Dodge Chino Mines Company

Worked in mine engineering technical services updating mine maps (toe and crest) using computer software (AutoCAD 13, Med systems). Also worked with the surveying crew performing regular mine surveys (toe-crest, blast holes, dams and tailings progress, ramps, leaching pads) using Tremble GPS equipment.

May – August 1996: Metallurgical Engineer (summer employment) Cyprus Bagdad Copper Corporation

Worked in Mill Technical Services, performing calibrations using Outocal software and start-up of three new on-stream X-ray Analyzers (Outokumpu Couriers C-30). Also performed supervision of contractors working in the mechanical and electrical section of the C-30 project.

1992 –1994: Assistant to the President of Sea-Lect Seafood's, Inc. (Tampa, FL)
In charge of purchasing an average of $5,000 seafood/day and handling accounts payable of approximately $70,000/week. Served as supervisor to 15 employees.

1989 –1991: Assistant Chemist at Enami, Chilean State mining and metals company El Salado, Chile
Performed analyses of copper, gold and silver samples at a quality control lab. Considerable emphasis was placed on precision and detail in the laboratory.

1988 –1989: Copper Heap Leaching Technician for Enami, El Salado, Chile

Maintained and operated copper leaching process by measuring pH levels, flow control; performed copper content analyses for influent (pregnant leach) and affluent (post-recovery) solutions.
1984 and 1985: Assistant Metallurgist for Enami (summer employment) El Salado, Chile

Performed flotation tests to optimize mill and flotation cells operations, Cu and Au mill recoveries. Also performed leach column tests for the Thin Layer (TL) project at El Salado plant.

Awards and Honors

1995-1998 New Mexico Tech Regents Scholarship recipient
1996-1998 Phelps Dodge Scholarship recipient
1998 Honor Roll

References

Upon request

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1601 to 1650 of 15478)

Go to Search Parameters...

Brief Description

A Mechanical Engineer with 20 + years of experience in O&M of large Diesel engines and various machineries in power plant and marine industry

Senior Executive with more than twenty years of experience, many of them abroad.

Project / Engineering of facilities for the domestic and international oil and gas industry with emphasis on Structural and Foundation Engineering. Strong knowledge of processing, and construction of platforms, pipelines, platform drilling /workover rigs, etc.

Education from both China and United states major in transportation engineering and computer science. As a transportation engineer with more than 10 years¡¦ experience in both United States and China, his work extended from general transportation infrastructure design, transportation plan

I have extensive experience in Cu/Mo/Au Concentrators working in the US and Chile in both technical and operations side of the business. My experience includes, conventional crushing and ball mill operations as well of SABC circuits.

Offshore Oil & Gas Paramedic

Fifteen years of experience in Refinery, Oil & Gas and Petrochemicals field as a Piping designer in producing plot plans, Equipment Layout, Piping General Arrangement Dwgs, Piping isometrics, Jacketed piping isometrics, M.T.O., Stress isometrics, Sketches, Nozzle orientation and as-built Drawing on

Heavy civil construction skills. Concrete apllications and procedures. Sediment and erosion. Overhead and underground utilities construction. Heavy equipment operation. Regulatory laws pertaining to heavy construction.

Servicing oil and gas wells; running/pulling tools ,well clean outs using nitrogen

Equipment operations

I have had the opportunity to work either in extractive pyro or hydrometallurgy coupled with a strong background in computing . I am doing my best to be aware of all step made in metallurgy. I am honest, experienced leader and team builder. I accept also to relocate with my family.

Marine Surveyor

chemical engineer in pakistan steel mills

I am an IRCA (UK) Registered QMS 2000 Lead Auditor, currently working QA/QC Manager with an EPC Company for Yemen LNG Project, Balhaf site, Yemen.

Maintenance planning, projecting, implementation, monitoring, management, highly experienced in these areas.

Operation Management for FPSO / FSO

Petroleum Engineer with extensive experience in Drilling, Operations, Drilling Management. Trained in: Offshore, Onshore, Inland-waters. HTHP wells, Gas wells, Horizontal drilling.

Engineering professional with 17+ years of experience within diverse oil, gas field, refinery and petrochemical industrial arenas. Expert level engineer for instrumentation and control disciplines.

Reliability / Maintenance / Rotating Equipment Engineer with 20+ years of experience in Oil / Gas / Petrochemical / Utility industries.

Experience with handling database and managing data. Very familiar with writing database queries in SQL, as well as developing database scriptings. Industry expert in data quality.

Over 13 years of solid experience in piping stress/pds design for Refineries,petrochemicals,fpso&power projects.

To present my background and what I can do in the company with my skills.

FOR THE POST OF QUANTITY SURVEYOR (BUILDING SECTOR)

Skilled mining enginner (blasting engineer) and of upto 12 to 13 years experiance

Saudi Aramco Approved Vendor Inspector SAP No. 70004827, Certified API-510, Cswip 3.1, NDT Level2, ISO 9001.

13 years oil industry experience,• Drill wells up to 6500 mt, High temperature gas wells, drilling of horizontal multi-lateral hole, sidetracks, H2S Environment,Run 5 1/2" expandable liner & Run 4 1/2" completion assy., with 4 1/2" liner cemented off bottom

Sales Professional

Analytical, communication, result oriented, and learning for development

Experienced Operational personell in the field of oil and gas / petrochemical with commissioning experience

Geophysicist with over 12 years experience in various aspects of geophysical works. Proven solid experience in: 2D/3D seismic interpretation, Velocity Modeling, Acoustic/Elastic Inversion, AVO/AFI analysis,Seismic Inversion

Designation project supervisor in higher risk environment

I have master degree in mining engineering and i have 10 years experience in mining engineering field such as open pit mining and underground.I worked in coal underground mines, marble,florin,copper andmanganeze mines.i was the member of American society of minning ,metalurgy and petrolium engineer

Mechanical engineer graduated in 1991 from Damascus university (machinery department)since that date (15 years experience in oil and gas industry in onshore and offshore)I have been in several companies(SPC,SCOT,Alfurat petroleum co with SHELL in their gas plant.

Certified PMP having rich experience in EPC & construction management of Real Estate, Infrastructure and Petro-chemical Projects, Proficient in Primavera, MS Project and MS Office

20 years experience in process and laboratory analyzers in refinery and Petrochemicals operations world wide. Graduate degree in analytical chemistry. Willing to relocate.

Maintenance Planning & Scheduler for 30 years in Industrial Setting

Sr. Civil Structural Designer

B. Com. 16 years of experiences different construction materials such as soil, aggregates, concrete & asphalt laboratory & field test & Prepared test reports by using computer.

MC Driver and Chef

Working as Well Site Geologist for Oil Field Instrumentation, India. Our client is MEDCO international an Indonesian company. Presently I am working in Oman. I have worked in the following fields of Oman: Simsim, Warad, Basma and Irad.

Maintenance Welder/Fitter with strong background in Plant Maintenance

PANEL AND FIELD OPERATION

CAREER SUMMARY : Vast experience in the field of industrial piping, i.e. petrochemicals, fertilizer, synthetic fiber, refinery, polyester and pharmaceuticals industries. Main responsibilities includes - model review, piping designing, supports, drawings checking, site survey and coordination.

I have worked in the Oil & Gas industry for over 20 years

HSE Manager with international experience. Nebosh certificate.

My career objectives, strengths and experience in the workforce I am a skilled, experienced and respected heavy equipment mechanic with substantial experience onshore & offshore Australia and overseas particularly here in Asia.

Experience in Supply and Demand Planning, Customer Service, Logistics and Purchasing

I am actively seeking a production management opportunity in a demanding, fast-paced multi-tasking environment, where I can provide critical management with a multitude of skills, and I would like to continue my growth with in your company.

20+ years exp. in survey and valuation, mines rescue services

Land Surveyor , Autocad Tech.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 [ 33 ] 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Goto Advanced Search...
Keywords: (e.g. mining engineer)		Find results with:

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out