Resume - Safety Specialist with OSHA 500 & 511 certifacations

Misco Jobs

Resume #78995

CONTACT INFORMATION:
View contact information...

Objective:
To obtain a position that will best utilize my experience and expertise and allow me to be an asset to the mutual benefit of both my employer and me.

Education:
Graduated from Campbell County High School in 1979
May 1993 Texas A&M Engineering Extension Service
Industrial Fire Fighter
NCCER Certified Plus (Pipe Fitter)
Fluor HSE Leadership Training
BP Job Rep Training
JMW Leadership Training
TWIC Card
OSHA 10 hour class
OSHA 30 hour class
OSHA 500 class
OSHA 511 class

Summary of Experience:
Twenty-six years experience in construction and maintenance. I have a strong safety back ground and mechanical background in supervision, planning, and fabrication on maintenance, turnaround, and new construction projects. I have 12 years experience in photography and have spent the last three years doing plant photography along with my job duties. FCCU, furnaces, Crude, Ethanol and Phosphate Plants are some of the units where most of my planning and supervision has been used over the past 15 years. I am familiar with all types of mechanical equipment. I take pride in never having a recordable or doctor's case. Safety is a very important part of all jobs.
1979 ¡V 1983 U.S. Army Airborne National Guard Fort Benning, GA
Work Experience:

Safety Specialist Tray-Tec 6/08 - Present
* Hexion Deer Park Deer Park, TX
Responsibilities included working hand in hand with the head Hexion Environmental Health & Safety doing plant wide audits, third party safety for all contractors and leading the team that is writing JRA's & SOP's Plant wide. (Job Risk Analyst & Standard Operating Procedures) Building spread sheets to organize and track all work and progress. I also do all of the plants photography for incident investigation and training material.

Safety Specialist Innovative EH&S 3/08 ¡V 5/08
* Hexion Deer Park Deer Park, TX
Responsibilities included the writing of JRA's (Job Risk Analyst) for every job that Hexion does. Writing or rewriting SOP's (Standard Operating Procedures) I also do all of the plants photography for incidents and training material. I also do all of the plants photography for incident investigation and training material.

T/A Coordinator/Safety Shell / ITC 12/07 ¡V 3/08
* Shell Deer Park Deer Park, TX
Responsibilities included the planning and execution of piping installation during pre-turnaround and turnaround work. Coordinated pipe fitters, boiler makers & welders. Removal of bundles and cleaning of exchangers. Coordinated the expedition of the piping, helped create rigging plans and obtained the permits to complete these tasks with zero incident or injuries. Over 1 million hours with out a recordable. Turnaround photographer for up dates and tracking equipment repairs.

Job Rep-Safety T/A Coordinator Fluor / ITC 9/06 ¡V 12/07

* BP Texas City Site Texas City, TX
Responsibilities included daily safety audits of all work sites, morning group safety meeting for the project and setting up the safety topics for daily tool box meetings. The planning and execution of piping, demolition and installation, Opening of Drums, Towers, & Exchangers for inspection and repairs. Obtained ATW's for various job on the PS3B Turn Around. Supervised various contractors in their daily activities. T/A photographer for updates and pictures for upper management took over 14000 pictures of the T/A. Over 3.5 million hours with out a recordable.

Pipe Fitter General Foreman, S&B Engineers 06/06 ¡V 09/06
* LCR Refinery Deer Park, TX
Supervised 3 - 15 men crews in the construction of new sulphur removal unit at Lyondell-Citgo Refinery in Pasadena, TX. Coordinated the expedition of the piping, created rigging plans and obtained the permits to complete these tasks with zero incident or injuries.

Pipe Fitter Foreman, JV Piping 01/06 ¡V 05/06
* ƒnValero Refinery Memphis, TN
Responsibilities included the planning and execution of piping installation during pre-turnaround and turnaround work. Coordinated pipe fitters, welders, rig operators, scaffold builders. Planned mobile equipment use for daily maintenance. Supervised 15-20 men crew to demo and install piping during turnaround. Coordinated the expedition of the piping, created rigging plans and obtained the permits to complete these tasks with zero incident or injuries.

Pipe Fitter General Foreman, Sanders Brothers 5/05 ¡V 12/05
* ƒnDuPont Staley Loudon, TN
Responsibilities included the planning and execution of piping installation of new construction projects. Worked with service contractors to coordinate proper and effective work schedules to obtain peak performance from all contractors without delay and done in a safe and timely manner.

Pipe Fitter General Foreman, J.E Merit Construction Company 1/05 ¡V 4/05
* ƒnPCS Phosphate Plant Aurora, NC
Responsible for obtaining permits, demo and replacement of piping and structural steel on various maintenance jobs. Fabricated pipe in fabrication shop, obtained dimensions and detailed drawings of piping replacement, installed all piping and structural steel.

Software Knowledge
Microsoft Word, Excel, Outlook, Power Point, Photo Shop CSII, Photo Shop CS III, Light Room

References:
Will be provided

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 8551 to 8600 of 15508)

Go to Search Parameters...

Brief Description

Duties included design and drafting; instrument drawings and documentation such as instrument plans, installation details, creating databases and maintaining an instrument index, and numerous on-site surveys and field work for modification project.

Instrumentation Engg done the project in Hikal (Agro-Chemical company)

I am a young innovative technichian seeking a full-time position with your company.

Maintenace Electrical Foreman

Project Management / Construction Management / EPC / EPCM / PMC

Entry Level Petrol. Engineer

Background in Geology, highly motivated, great work ethic, has great desire to learn.

loaded chemical into varies transports for georgia gulf.

Fresh graduate of Petroleum , i did work with BP Pakistan as internee and also have command on Prosper software please give me a single chance so in this way i can show my skills and talent .

Construction Administration/Project Controls

I am looking job in instrumentation field as instrument SUPERVISOR/INSPECTOR/SR.TECH

A position in which I can effectively use my technical, analytical and creative skills environmental management to improve a company’s environmental operations.

Paramedic/Offshore medic with 19 years experience in Oil, Gas & Renewable Energy industries

Contracts Engineer

seismic interpreter with a strong background in petroleum and structural geology, gained through working on a wide range of fields in different structural settings in the Syrian Euphrates Graben area. A skilled user of the Geoframe and OpenWorks software suite. Completed seismic interpretation

I am a Mechanical Engineer having Post graduation diploma in power plant ,working since Nov'02 in the field of power plant execution

5+ years production and design experience in refinery, PDS, PROCAD, Microstation, AUTOCAD,LDT

Process Engineer

I am an adaptable, enthusiastic and reliable person with experience on a large variety of CAT products, used to working under pressure, meeting deadlines, organizing and communicating.

My skills include the performing maintenance work and repairs on transmitters: SW, FM and AM. Maintenance work on Exchange Equipment: CDMA, trunk, lines. CCNA IN VIEW.

I have 10 years of underground operations experience which includes. Haul truck, mucker, jackleg, bolters and jumbos.

Ability to work as a team with little or no supervision. I read polymer and textile Engineering.

Abity to work with little supervision,counseling ,Bsc Industrial chemistry

Excellent communication skills -english:oral and written.Leadership skills :As a leader of the project team assisted the team in solving the problems that arose.Computer Proficiency:Ms Word,Excel,Powerpoint.Software:Intouch(SCADA).PrimaveraP3

Analytical, Numerical, Organizational, Computer skills.

I have bsc i.n Geography and Environmental Management, Self- motivated, focused, goal driven, time and SAFETY conscious. Computer Literate.

Government Girls Comprehensive Secondary School 2008 – 2009

Mechanical Engineer with Piping Engineering Knowledge

Mechanical Draughtsman / Cadd Technitian. / Mep Draftsman / Mep Co-ordinator.

I have a Bachelor of Science in Computer Science and in March '09; i will be getting my Microsoft Certified Professional and Microsoft Certified Technical Specialist - SharePoint papers. I have a managed a number of large software projects in Zambia, mostly in the capacity of project manager.

Personable, work hard, and fast learner

Education: 4 years degree in Population and Family Life [population and healthfrom the University of Cape Coast, Ghana from August 2004 - May, 2008

Mine planning, designing and scheduling (B. Eng. in Mining Engineering)

I am working in chicago Bridge & Iron (CBI) an EPC company, in Saudi Arabia as a Field Engineer.I have the ability to work both in field and office, also, ready for extensive travel.I am team player with good communication skills.

BA in Geoscience; 1 year experience cased hole wireline; intern for geology consultant in DJ Basin

Safety Specialist with OSHA 500 & 511 certifacations

With knowledge in SMAW 6G,TIG,GTAW,OAW. and Brazing welding. Plasma and Oxy Acetylene cutting, Lathe Machine operation, Pipe fitting Jobs and fabrication. Operate the forklift ,crane and wenches

Class a CDL, Ecavator operator, Concrete Foreman,

Senior CMMS Engineer and Business Process Engineer with expertise in Oil & Gas plant Enterprise Asset Management with extensive experience in Maintenance, Material Management and Procurement; plant data collection and quality check.

EMPLOYMENT WITH Eni ,Bhit Gas Field Pakistan (Italian Oil & Gas Company)

Looking for a challenging position in the field of Civil Engineering, Construction Utilities.

Project leader and technical manager for heavy crude

Experienced, Bilingual Trainer Seeking HR or Marketing Position in Indonesia

Energy (coal/gas/nuclear) -- ISO 9001 -- ISO 14001 -- Published -- International

I have 34 yrs Crane Operator experence, 4 yrs Crane, Rigging, & Mechanical Trainer experence. I have offshore crane operator exp. and onshore crane operator exp.

Senior Estimator Available to work in Indonesia, Malaysia, Nigeria, Kazakhastan, Thailand

More than 13 years of working experience with Major Oil & Gas Industries for their Documentation with responsibilities in Technical Documentation, Library system, Supervision, Administrative, Vendor, Procurement & Project Management etc.

Total 16 Years of diverse experience in Piping/Mechanical design of Refineries, Chemicals, Petrochemicals, Fertilisers Plants. 5 years experience in Operating Refinery of KNPC. 9 years of cosultancy (EPC) experience. 2 years of Piping design & construction experience.

Seven years of experience in oil and gas upstream industry as geophysicist. Currently involved in exploration & development of a deep-water lease in East Coast of India with multiple play/prospect (gas) discovery identified by 15 successful exploratory wells.

10 years experience in engineering & design of material handling equipments like coal handling, MSW handling etc.

First Prev 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 [ 172 ] 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 Next Last

Seach Parameters


Goto Advanced Search...
Keywords: (e.g. mining engineer)		Find results with:

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out