Resume - Mechanical senior technician,• Carry out maintenance work independently in the r...

Misco Jobs

Resume #79044

CONTACT INFORMATION:
View contact information...

Qualifications:
Senior mechanic technician
From the National institute of mechanical engineering of M'sila Algeria

Languages:
Arabic Written and spoken (good)
French written and spoken (good)
English written and spoken (quite good)

Employment history

From 05/2005 to present
SONATRACH/ ANADARKO Groupement Berkine Algeria

Function: Mechanical team leader
Employed permanently at a central processing facility (contains 4 trains for oil processing and common system gas dehydration, gas injection, produced water treatment, water injection and utilities).
In charge of:
* Carry out maintenance works (preventive and predictive maintenance of all CPF equipment).
* Supervise and assist a Mechanical team
* Determine Work Scope of every Work Order
* Determine Risk Assessment of every Work Order (corrective and preventive) with HSE and process people.
* Allocate work to team members.
* Report directly to the mechanical supervisor.
* Assist the preparation and Working in shut down of CPF.
* Preparation and Working in shut down of CPF.

From 03/98 to 05/2005
SONATRACH/ ANADARKO Groupement Berkine Algeria

In charge of:

Mechanical Senior Technician
Employed permanently at a central processing facility (HASSI BERKINE), assisted with precommissioning, start up and commissioning of CPF.
* Carry out maintenance work independently in the repair, overhaul, troubleshooting, alignment of rotating equipment like (pumps, compressors, fans …), spares requirement…
* Perform preventive and predictive maintenance.
* Hands on experience in handling mechanical seals, O-rings, and shaft seals.
* Hands on in alignment (reversible, and laser) of rotating equipment horizontal and vertical centrifugal pumps, compressors fin fans…
* Hands on in maintenance of DRESSER RAND INJECTION Compressors, GE & SOLAR TURBINES and associated equipment. Various vertical /horizontal pumping, rotating equipment packages, a long with various static equipment.
* Hands on in overhaul of Dresser Rand compressors 361B 5/5, 171b 5/5 and DATUM compressor and alignment.
* Hands on in overhaul of vertical and horizontal pumps and commissioning of units into service.
* Hands on in flushing of oil systems (TURBINES, COMPRESSORS, MAIN INJECTION WATER PUMPS)
* Alignment of all CPF machines (laser&eversible alignment)

From 07/97 to 03/98
SONATRACH Hassi Messaoud Algeria
Mechanical senior technician –worked in a team of Turbo Machine and Turbo Compressor.
Worked on overhaul of General Electric (GE) Turbines (fram5, fram3).
Worked on overhaul of a Hispano suiza Turbine.
Worked on overhaul of Nuovo Pignone compressors

From 05/91to 07/97
KAHRAKIB-(SONELGAZ) ALGERIA
Mechanical Foreman-Working in Overhaul of various engines of heavy machines
Overhaul of various engines of utility /commercial vehicles and engines motor vehicle. Worked on engine-test stand. Worked on various peripheral equipment of the engines (turbo-compressors, water pumps, oil pumps, hydraulic pumps).

From09/87 to 07/89
TECHNICAL SCHOOL-ALGERIA
Mechanic Teacher, mechanical construction.

Skills
Use MS WORD, MS EXCEL
CMMS (Datastream 7i, MP2), work request, pick list for spears, cataloging request, print (CO and PM) work orders.

INDUSTRIAL TRAININGS

- Dresser Rand centrifugal compressors training for 12 days at Dresser Rand company UK.
- Nuovo Pegnone Gas turbine training for 5 days at Florence Italy.
-Trainings at site in CPF material assisted by SYSTRAN training.
-1 week training with BENTLY NEVADA (ADRE, vibration analyzes, machines diagnostic, balancing) at Nantes France.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1251 to 1300 of 15487)

Go to Search Parameters...

Brief Description

Experienced Country Manager, skilled in change and open to multicultural environment.

Design skills in steel and concrete of petro chem and power plants.

Production Engineer resume

Hands on site experience in infrastructure works (roadworks ) and buildings works with total 19 + years experiences ( supervision and project management)

Maintenance Electrician

I working for Schlumberger Achievement as Crew Chief Wireline Operator. I perform jobs in location. Working in a Team is one of my compliances, most jobs in Cased Hole and Open Hole, and report to Field Engineer

Coatings & Corrosion Engineer "NACE"

I am 44years old and right now I am still working at PT Pec-Tech Indonesia (RGMI Group), current position as “Senior Process Engineer”. Business line of this company is Engineering/EPC As you can see from my enclosed curriculum vitae; I have long and wide experiences (± 19 years) in Operation Pro

Senior Environmental Engineer/Manager, Multimedia, heavy industry, permitting, compliance, ISO14001

Licensed professional engineer with over twenty-seven years of structural design and deliverables production experience for Industrial, Commercial, Residential, Oil and Gas, and Transportation projects

Upstream and mid-stream experience(27 years) plus underground waste water injection

earned master of science at the University of Oklahoma in the subject of rock mechanics. He has been a professor of production, drilling, completion and stimulation for more than 14 years, and he had earned more than 12 years of field experience.

I am experienced Metallurgical Engineer with unique experience in a broad range of metals/gasars/alloys/composites processing, including alloying, casting, melting, heat treatments, microstructure design. Able to work in quality control, research and development facilities.

I am experienced in reservoir simulation and numerical modelling, foamy heavy oil flow, well testing analysis, production forecast, horizontal and multilateral wells, thermal recovery, water flooding, PVT sampling and analysis.

I have a PhD in Logistics Management and over 20 years work experience in shipping, logistics, supply chain management, airfreight, sea freight, container marketing & operations, port development & expansion, ship and air chartering, project cargo handling, freight forwarding, etc.

Skilled, knowledgeable, and experienced in organizational assessment, strategic planning, business process reengineering, organization design, and change management in oil and gas related operations including production SBU's, upstream and downstream R&D, MIS, and Finance

I have outstanding experience in the design of high-pressure gas transmission line and its associated facilities in valve stations and also a fuel gas supply line plus governor station to 1800 MW combined cycle power plant in South Korea.

Attached herewith is my current RESUME. I would like to be considered for a suitable position in the fields of Applied and Analytical Chemistry, Chemical Process Design and Development, Environmental Engineering, and/or Project Management.

An experienced industrial minerals processor with vast knowledge of kaolin and talc processing. Work experience include 10 years in R&D (process and new product development) and 10 years in academia. Looking for the right opportunity outside the USA and Canada.

A Procurement/Logistics/Admin Manager of 25 years experience in the O & G industry particularly with FPSO's. Has contracted in Thailand/Singapore/Malaysia/Nigeria/Libya/UAE/Qatar/Scandinavia/Europe.

 Over 21 years of experience in the Petroleum exploration Industry.  Have broad experience in the area of drilling and completion fluid design and formulation in on shore as well as off shore wells.

Senior reservoir engineer: 30+ yrs experience in N. America, S. America, and Europe. Denver-based. Available for contract work, long-term or short-term. Fluent in English and Spanish.

Drilling Specialist for 35 years. Postings have included Worldwide Drilling Manager, In-Country Drilling manager, Drilling Engineer, On-Site Drilling Supervisor and Drilling Consultant. Skilled in foreign start-up operations and training of Nationals.

A versatile and Innovative Chartered Accountant of Nine Years post Qualification experience and Eighteen years on the Job Practical Experience

Over 22 years’ professional experience in Conceptual, FEED, Detailed engineering and project management in Oil & Gas, Refinery, Petrochemical and Chemical projects.

27 years industrial minerals experience in open pit mining and mineral processing management. MS Geology, excellent communication skills, team player and leader. Excellent safety record.

Over 12 years (over 4 Years in Gulf Countries) in pre-commissioning and commissioning, start up, daily plant operation and shutdown activities for large oil and gas, refinery and petrochemical plants.

Project Engineer with Australian education, canadian experience and with very good project management skills.

Pipeline, Facilities and Project Engineer.

12 years experience in Warehousing and Logistics operations from in-bound to out-bound w/ purchasing function

More than 18 years of design experience in oil and gas production, gas processing, LNG Production, and projects of refinery, petrochemical and chemical industries. Specific experience in front end and detail engineering, process engineering/flow schemes development, process data sheet preparations

Good working experience on Instrument and control system

Senior Mechanical Piping / Stress / Equipment Engineer BS in Mechancial Engineering USA National

8yrs of working experience in the field of HVAC & Duct Manufacturing. M.S. from KFUPM. B.E. (Mechanical). Areas of Interest Heating, Ventilation and Air-Conditioning. Indoor Air Quality. Facilities Management (Inventory, Space, Maintenance,

QA/QC Enginner

PMO, Planning, Project manager, Program Director

Reliability, Maintenance, Planning and Material Engineer- Mechanical

More than 15+ years experience in process operation

I have 17 years of Planning experiences within oil and gas, petrochemical, mining, power plant and industrial plant construction. I am also an advance user of P3/P5/P6.

Telecom field technicians Customer end

B.E. with 22 years of experience in Highways, Industrial and Building construction, out of which 3 years in Saudi Arabia. The experience includes-

Procurement, Contracting, Logistics and Inventory management

Principal Engineer with 20 years Umbilical, Flowline and Riser Experience Design, development and installation of flexible Flowlines, risers, umbilical and oil offloading lines and associated ancillaries. Including dynamic, structural and on bottom analysis.

Electrical Maintenance in Petrochemical Industry

Extensive and diversified experience in the field of Onshore & Offshore Oil &Gas, Petrochemical, Refinery, Chemical Plants for FEED, BASIC Design & Detail Engineering for various types of Static Equipments viz. Pressure Vessels, Columns (CS & CLAD), Towers, Reactors, Heat exchangers, steel structure

I am male, 42 years of age and I was working with ASL Marine Holding, Tiong Woon Corporation Holding Ltd, ASL Shipyard Pte Ltd, Beng Soon Machinery Pte Ltd, PAE Singapore Pte Ltd, Unocal Petroleum Myanmar, Amoco Petroleum Myanmar, BHP Petroleum Myanmar. I had my experiences Asst: Superintendent, Wor

I´m Chief OFFicer wiyh tanker experience and Other Ships like Tug Boat, whit 7 years at sea, 10 yeras in oil and marine industry, Ship Yards, Port Operations, Manager in Logistics Deparment, Sipply Chain, Desk and Administrative work.

Diverse background in underground & surface exploration, underground production & ore control, resource modeling, geologic mapping, core & chip logging, process metallurgy & mineralogy, mineral analysis & geochemistry, laboratory operations, project management, mine planning, crew supervision

Telecom

Mechanical senior technician,• Carry out maintenance work independently in the repair, overhaul, troubleshooting, alignment of rotating equipment like (pumps, compressors, fans …), spares requirement…

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 [ 26 ] 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Goto Advanced Search...
Keywords: (e.g. mining engineer)		Find results with:

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out