Resume - Maintenance Supervisor/Security, Maintenance Supervisor/ I&C, Project Manager

Misco Jobs

Resume #79639

CONTACT INFORMATION:
View contact information...

EXPERIENCE SUMMARY

Twenty-nine years of diversified technical and management experience including: Maintenance Security Supervisor, Instrumentation and Control Maintenance Supervisor and Project Manager.

EMPLOYMENT HISTORY

American Electric Power * DC Cook Nuclear Plant

2001 - Present: Maintenance Security Supervisor
* Supervised technicians responsible for performing Preventive and Corrective Maintenance on plant security equipment.
* Accountable for overseeing new equipment installation.
* Security Equipment includes fiber optic cameras, microwaves, metal detectors, explosive detectors, x-ray machines, electric strikes, card readers, hand reader stations, and maglocks.
* Substantially reduced the microwave zone equipment downtime from an average of 200 hours per month to approximately 7 hours or less per month.
* Collaborated with Fix-It-Now teams to troubleshoot equipment.
* Managed equipment maintenance budget.

1998 - 2001: Instrumentation and Control Maintenance Supervisor
* Supervised Instrumentation and Control Maintenance crews performing surveillances, bench and loop calibrations, valve setup, gauge calibration, Corrective Maintenance and Preventative Maintenance tasks.
* Performed administrative duties including, but not limited to training, time sheet review, staff schedules and coordination of responsibilities.

1989 - 1998: Project Manager
* Coordinated facility activities associated with the implementation of Instrumentation and Control changes, as well as Electrical Design Changes.
* Coordinated technical, regulatory, material and administrative support for design changes.
* Researched, prepared, and reviewed Design Change packages prior to issuance for implementation.
* Maintained the design change installation for schedule adherence; provided technical direction as required.
* Closed out Operation Return to Service ¡* punchlists.¡¨
* Reviewed as-built drawings for mark-up.
* Analyzed installation documention for completion.

1983 - 1989: Instrumentation and Control Technician/Design Change
* Performed loop calibrations, surveillances, valve calibrations and corrective maintenance.
* Verified design changes to ensure accurate prints and proper implementation.
* Installed design changes and tested to verify completion.

1980 - 1983: Auxillary Equipment Operator
* Operated plant equipment under the direction of the Reactor Operator.

EDUCATION
* 1978-1980 Radio and Video Technician - United Electronics Institute, Grand Rapids, Michigan
* 1978-1980 Electronics Technology - United Electronics Institute, Grand Rapids, Michigan

TRAINING

Security and Equipment Training
* 2003 Operator & Maintenance of RAP 500 Series X-ray machine - Rapiscan Security Products, National Academy for Nuclear Training, Atlanta, Georgia
* 2003 Operator & Maintenance of GE Entry Scan Explosive Detector - Massachusetts
* 2002 Scanex I Training Course - Sentex System Inc. USA, New Jersey
* 2002 Microwave Training Course - Southwest Microwave, Arizona

Management Training
* 2001 Maintenance Supervisor Professional Development Seminar - National Academy for Nuclear Training, Atlanta, Georgia
* 2000 Labor Relations Training - D.C.Cook
* 1999 Maintenance Supervisor Training Program - National Academy for Nuclear Training, D.C.Cook
* 1998 New Leader Program - D.C.Cook
* 1991 Nuclear codes and standards - General Physics Corporation
* 1991 NEC 250: Grounding Electrical Distribution systems - George Washington University
* 1990 Post Modification Testing Training - General Physics Corporation
* 1990 National Electrical Code - University of Toledo
* 1989 Project Management for Engineers - General Physics Corporation

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1051 to 1100 of 15497)

Go to Search Parameters...

Brief Description

25+ years experience in electrical/control system design for the petrochemical industry. Additional three years experience in civil engineering. Experience has included electrical/instrumentation design to NFPA, NEC and ISA standards, field engineering, as well as managerial experience and CAD.

B.SC. ENGINEERING, PROACTIVE TECHNIQUE,ISO9001:2000 & HSE

17 years in procurement, project management, planning

Ihave varied U/G experience as a Supervisor and have honed my communicative skills, with a constant focus on regulatory compliance.

Drilling fluid superintendent / supervisor ( mud, cement, waste management)

Project management executive with experience in project management, coordination, planning, monitoring and controlling projects.

I am a knowledgeable Mechanical/Piping Designer with Project Engineering experience, capable of increasing degrees of responsibility.

Over 14 years of professional experience, including 8 years working for a multinational Fast Moving Consumer Good companies, Involved in various assignments, focusing on HR Recruitment Strategy, Competency Assessment and Performance Management Systems Design, Organization Design and Development, and

electrical/mechanical superintendent/ project manager

Civil Engineer with 17 years experience

I have twenty five years of piping design, 10 years of project leading with in the piping group, shop fabrication & field construction c/w PDS & AutoPlant soft wear experience. I have US work experience & posses a valid Social Security card.

Offering more than Fourteen years of Experience in Marine, Offshore, Oil & Gas Industry with a wide variety of projects involved in Electrical & Instrumentation Disciplines. Acquire extensive knowledge in a broad range of Computer programs & other Various E & I Engineering Field

Chief Finance Officer of Group having One Islamic Investment Bank in Dubai and Asset Mangement Company in Malaysai,

Expert in managing conglomerates and applying strategic planning and control instruments

Instrument / Controlsystems Engineer

Driller / Tool Pusher (Onshore / Offshore)

Geologist geophysicist interpretation

EPCM Project Contracts Interface (Client-EPCM-Subcontractors)

Emergency Management professional with 28+ years of combined experience; managing teams, providing technical expertise and leadership in programs, projects, operations, and training; in both Fire Services, Training Academy’s and the Petrochemical Industry

Electrical Maintenance Engineer With over 30 years of experience in providing services and solutions to electrical maintenance and Training & development etcin the engineering and Oil & gas industry.

To obtain a challenging position with an engineering firm where I can use my relevant skills and experienced as Interface Design Coordinator / AutoCAD Supervisor and be a contributing member in the growth of the company. Willing to work as a key player in challenges where I can put my committed atti

My professional education has been in the field of Ag. Economics, commodities trading and along with strategic planning and leadership. Abilities that applied in my past in more than 16 years of executive management in agribusiness management and high governmental level positions,

I am capable of achieving organisation¡¦s objectives and organic growth through effective contributions. I have over 13 years of experience in the areas of Health, Safety & Environment Management

Safety Manager/Director - risk management

Maintenance Supervisor/Security, Maintenance Supervisor/ I&C, Project Manager

Civil Engineer. Formwork Specialist. Experience: 14 years. Mounting, Scaffolding, Precast Concrete.

20 years fire fighting experience.Now working in ADNOC Off Shore facility

hv construction,power plant construction,locomotive maintenance,supervisor,general electrical maintenence

Overseas experience in Mineing and Oiland Gas in Maintenance Management

Having 23 years of sound experience in piping and equipment design for Onshore / Offshore Oil and Gas, Petrochemical and Chemical Industries.

24 Years of experience in Piping/ Pipeline Design Engineering for Oil & Gas of Onshore and Offshore facilities.

Experienced land professional with a strong background in all phases of petroleum land management. Proven expertise in a variety of situations, as well as proven leadership skills as demonstrated in Land Manager positions with two companies and as an independent lease broker utilizing the services

Structure designer is make development basic design from engineer to make engineering drawing with make details, sections, connection types and discuss with other department like piping, civil, mechanical etc to make problem solve in engineering design or site.

Fujitsu LV-III Installer, OSP Field Engineer, Structure Cable Lead Installer, Fiber and Copper Splicer, Network Tech, Antenna Tech

Mechanical engineer for heat exchanger, package, boiler, fired heater, fabrication, HTRI, compress

25 years Petrochemical / Oil Process Operations Including 10+ years in Supervisory / Man Management positions Commissioning and Start-up Assignments (Overseas)

Self-motivated, results-oriented professional with extensive international experience with multinational firms and government-owned facilities in the construction, shutdown, and refurbishing of oil, gas, petrochemical, and power facilities and plants.

Team Leader Const/Maint. Oil/Gas Ind.Experienced in planning/execution of projects ,procedures , method statements , permit systems , progress rep. , reviewing change orders, QA/QC and HSE standards. Running multicultural workforces coordinating disciplines and subcontactors.

PhD in Mechanical Engineering with emphasis on Materials and Metallurgic Engineering. Special knowledge in Surface Technologies, especially Thermal Spraying. a German citizen with Permanent Resident Status in Canada.

SENIOR PROFESSIONAL ENGINEER OF 30 YEARS DIVERSE EXPERIENCE

Over 20 years of extensive experience as an international consultant. Provider of structural software for the analysis and design of concrete & steel according to ACI, AISC & API codes of practice. Expert in; structural systems & forensic investigation. Professional in; STAAD III & MS office Suite.

Participates in inspection of Gupco’s R/Sh facilities to provide adequate advise on corrosion matters, especially MIC problems

Petroleum Geologist, having more than 22 years of experience. Presently working with Oil And Natural Gas Corporation Limited, India at Mumbai. Well versed in both development and exploration of hydrocarbon.

Wellsite geologist , Operation geologist ,The work is entirely based on a rig where the work activities during exploration and appraisal drilling projects are typically undertaken

Base metal and Gold extractive metallurgist, General Mill foreman. Non metallic project manager. Training and multilingual communication abilities.

Graduated in B.Eng civil 1976 and Post grad Hydraulic in 1982, total 28 years experience in civil, infra such as steel, timber, road, car park structures and sewer and pipe laying as well as tunnels and pipe jacking works.

Over 14 years E & P and Service Industry technical experience with proven records of project deliverables. strong technical background as a Geoscientist, i.e.; Production and Development Geology, 3D reservoir modelling, Integrated Field Development study & Field Reviews.

Diploma in Nature Conservation ( 5 years); Certificate in Environmental Biology (1year); atriculation Certificate (with exemption)

More than fifteen years Experience, working with consulting engineering companies in Iran and Canada, with different assignments in variety of projects including EPC, R&D, master planning and feasibility studies

Free! Experienced Heavy Civil & Design Build Construction Project Manager with additional experience with Project Controls/Scheduling/Claims Resolution Management.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 [ 22 ] 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Goto Advanced Search...
Keywords: (e.g. mining engineer)		Find results with:

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out