Resume - engineering-mechanical-management- oil & gas

Misco Jobs

Resume #79715

CONTACT INFORMATION:
View contact information...

Date of Birth: 30.05.1965
Languages Known: English, Tamil, Malayalam, Hindi &Telugu

Qualification:
B.E Mechanical Engineering
P.G. Dip. Marketing

Management
Objective:-
To work in a globally competitive environment on challenging assignments that shall yield the twin benefits of job satisfaction and a steady-paced professional growth along with the organization.

Job Profile:

„« Having 20+ years experience in Mechanical field

„« Working with group's multi-discipline facilities engineering resources and external contractors, technical responsibility for delivery of design development, engineering, procurement, construction, commissioning and close out of projects in accordance with the required project specification on time and within budget.

„« Monitoring of material procurement& commercial arrangements /contracts with third ¡Vparty service providers and to ensure an acceptable standard of service and financial control is achieved.

„« To ensure assigned projects remain with compliance for all HSE, technical, financial approval, budget control, administrative and commercial procedures.

Career Experience:
* Presently working seconded to RAS GAS ¡VQATAR KENTZ as
Shut Down Coordinator From Dec"2007
„« Co-ordinate & Monitoring Piping erection, capital project, project tie-in & quality as per RG standard. Also Cryogenic heat exchanger, PHE, Vessels, columns, Regenerator, Dryers, Gas Turbines, Furnace, coolers, etc
„« To plan, direct, supervise multidiscipline team and co-ordinate Shutdown & projects and Start Up Activities (Multi-Discipline) carried out in the LNG trains, AGI and associated Utility plants to complete in time, efficiently, safely and within set budget
„« Review and co-ordinate the approval of Standards and safety instructions
„« Assist in the planning of projects and shutdowns assessing resources, materials and logistics requirements.
„« Provide expertise and support during shutdown and restart of the plant
„« Preparing of scopes and packages for shutdowns
„« Planning for shutdown activities, including material expediting
„« Shutdown execution, supervision progress monitoring
„« Contract scope writing for shutdown activities
„« Act as a site based focal point for activities carried out by the company
„« Works in line with HSE regulation & HSE management systems & ensures compliance of the same subordinates and contractors.
„« Preparation of Daily reports and project closeout reports.
„« Post shutdown demobilization activities, including material return, wrap up reports & duties as directed by COMPANY
* Worked as Construction Manager in Worley Parson-Arabian Industries LLC in Petroleum Development of Oman from DEC 2005
„« Retrofit of Deep Water Disposal pump
„« Oil storage tank erection & modification
„« Flow line Piping erection, modification, Hook-up, pipe line protection, gathering station etc
„« Flow line maintenance, water cut meter project execution etc
„« Also managed site Measurement, contract & cost estimation and follow-up, any variance in measurement and contract awarding to sub contractor, comparison of statement etc.
* Worked as Asst. Project Manager in, SPIC-JEL Engg Ltd, Chennai from March 2005 to Dec 2005
„« Complete co-ordination, technical evaluation as per construction standards, site feasibility
„« Erection of all static equipments thro sub-contractors Heat Exchangers, Vessels, Columns, Creep structure erection, Rotating Equipments erection, Piping erection &modification as per IOCL Standard and ASME Procedures
* Worked as Field Engineer In ANSALDO ENERGIA, ITALY, at South Isfahan Gas Power project from Jan 2005 to Feb 2005
„« Erection, testing, commissioning of 115 M.W Gas Turbine.
* Worked as Dy. Chief Engineer, site consultant in DESEIN Consulting Engineer Ltd, Delhi From July 2004 to Dec 2004
„« Owner's field consultant for 2x 125 M.W Parichha Thermal Power Project, Jhansi.
„« Review and Coordinate with all department for field modifications and confirm to project specification, design, function & operability
„« Providing Engineering support to field solution for the project
* Worked as Senior Project Engineer in Gujarat Mineral Development Corporation
(A GOVT of GUJARAT Organization), from June 2001 to June 2004.
„« Planning, execution testing & commissioning of Boiler and Turbo generator 2x125 M.W. Two Stage Power project.
„« Execution of sea water treatment system
„« Execution of closed cycle cooling system,1.5 meter dia pipe erection, testing, commissioning
„« Execution of plant compressor sys, plant Air conditioning sys& fire fighting system
„« Field Inspection & Project quality control
„« Project monitoring & coordinating with other agency
„« Review & checking of Contractor billing
* Worked as Dy.Manager in Sri Renuka Sugars Ltd, Belgum from 2000 to 2001
„« Operation & maintenance of 9.7 M.W Turbine, Boiler & process equipment
„« Planning & execution of preventive and predictive maintenance for Boiler,
„« Turbogenator and balance of plant
„« Fabrication & erection of Molasses tank, material handling system
* Worked as a Sr. Engineer in Vansun Erectors P Ltd, Hyderabad from JUNE 1999 to SEP 2000
„« Erection, testing, commissioning & maintenance in various power project
„« Kakarpar Atomic power 235 M.W Maintenance project, Gujarat Erection, testing, commissioning 9.7 M.W TG (BHEL Co-Gen)& its auxiliary equipment, Power piping, lube oil piping, etc at Sri Renuka Sugars Ltd, Belgum
„« Erection, testing, commissioning 16.5 M.W TG (BHEL Co-Gen) & its auxiliary equipment, Power piping, lube oil piping, etc at Gem Sugars Ltd, Bagalkot
„« Tarapur Atomic Power 210 M.W maintenance project, Bombay
* Worked as a Sr. Engineer in Engenius Erectors P Ltd, Chennai from 1989 to 1999
„« Erection, testing, commissioning 210 M.W TG (BHEL)& its auxiliary equipment, Power piping, lube oil piping, etc at Raichur Super Thermal Power Project, Karnataka.
„« Erection, testing, commissioning of crude oil storage tank, static &rotating equipments, Power piping, lubes oil piping, etc at Madras Refinery Ltd Chennai.
„« Erection, testing, commissioning 2x250 M.W TG (BHEL)& its auxiliary equipment Power piping, lube oil piping, etc at Surathgarh Super Thermal Power Project, Rajasthan.
„« Erection, testing, commissioning 2x115 M.W GTG (Siemens & BHEL)& its auxiliary equipment Power piping, lube oil piping, etc at Kayamkulam Combined cycle l Power Project, Kerala.
„« Kalpakam Atomic power 235 M.W Maintenance project, Chennai. retrencment

Course Completed
Course completed in PDO Course completed in RAS GAS
„« HSE INDUCTION „« HSE INDUCTION
„« H2S AWARENESS & ESCAPE „« H2S AWARENESS & ESCAPE
„« JOB HAZARDS ANALYSIS „« JOB HAZARDS ANALYSIS
„« PERMIT TO WORK(APPLICANT) „« PERMIT TO WORK(APPLICANT)
„« ESSW(Enhanced Site Supervision Worksite) „« B-SAFE PROGRAMME
„« BASIC LIFE SUPPORT „« AGI AWARENESS
„« INCIDENT INVESTIGATION „« SHUTDOWN SAFETY INDUCTION
„« OCCUPATIONAL & HEALTH SAFETY „«
„« Training Program for Shaft alignment -- Center for Management Development, Chennai
Software Proficiency:
„« Office Suite: MS Office (Word / Excel / PowerPoint), MS project,
SAP¡XML81, IW23, IW32, ML84 etc.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 551 to 600 of 15477)

Go to Search Parameters...

Brief Description

22 years experience in milling & mineral processing operations, laboratory testworks and project studies in both large and small-scale operations.

Twenty (20) years in Oil and Gas Industry. Working primarily at wellsite offshore and onshore, involved in exploration and development wells. Drilling Vertical and Deviated including Horizontal and Extended Reach Wells. Working onshore and offshore, Jackup and Tender assisted drilling rigs

Skills: Excellent communicator•In depth experience in drilling and workover in Romania and Libya; Highly motivated;•Expert skills in foreign languages: French, English;

Construction- and Project management, Engineering and Supervision of mechanical, piping and welding works, e.g. for oil and gas pipelines, pig-, pump/ compressor and metering stations, industrial plants, storage-tanks, structural steel, filling stations, town-gas and water distribution systems, work

Reservoir Simulation (Petre and Eclipse)

A highly qualified Mechanical Engineer with an extensive experience in developing design basis, specifications, data sheets, technical bid evaluation and vendor data review of various mechanical equipment packages for oil & gas projects

10 years in Analytical Instrumentation & 10 years in Process Instrumentation of highly skilled experience gained here and the Middle East. Adept at providing analytical and technical equipment support through troubleshooting, repairing, maintaining, calibrating, adjusting, and installing industrial

Extensive general geophysical experience, last number of years in airborne geophysics. Experienced in Africa operations.

I seek a position as ETO where my experience, training and good work habits will be an asset to your Company. I have 17+ years experience at sea.I have experience with Kogsberg Simrad SDP 21 onboard DSV DP2.I have got DP Technical & Maintenance Course.

Civil Engineer, with 27 years of Construction Management experience doing LNG berthing facilities, schools, petrochemicals, operation & maintenance of power & desalination plant, roads, water distribution system, accomodation camp.

Water Treatment Sales

Experienced Quality Engineer with Six-Sigma/Lean experience

I have more than 27 years experience in oil and gas industry in India and the middle east countries like Oman, UAE ( Sharjah and Abu Dhabi) both in offshore and onshore . I have worked in pipelines/piping design in consulting , EPC and also operating companies in the above countries

Commercial Project Control Manager with International EPC EPCM Experience on Mega Projects in Rail, Power & Mining Industries

OIL / GAS Industry professional with 35 years experience, strong organizational visual, Expert strategist, Designer, Analyst, Planner, Team Leader, Proven track record combines expertise in Quality Control Inspections, Cathodic Protection (Impressed &Sacrificial Anodes System

I am a graduate Mechanical Engineer with 20 years of HVAC experience.

Experienced Cutting Tool Sales/Production

In-House Landman

Construction Manager

Free! PDS Piping Designer with Over 20 years experience within the Oil and Gas, Petrochemical, Refinery, Textile, Pharmaceutical and Nuclear Waste Industries

Twenty (20) years professional experience executing multi-million dollar projects in both domestic and international locations, acting as Owner representative in project controls and business management on major EPC, Lump Sum Turnkey and Joint Venture projects supporting Oil projects

A dynamic professional with over 2 decades (25 years) of rich experience in Project Machinery Planning & Execution, Erection & Commissioning, Maintenance, Quality Assurance, Process Enhancements and Man Management.

Senior Manager - Domestic & International Mining Experience - Strategic Planning / Mine Planning / Technical Evaluation / Permitting / EPCM / Project Development / Mine Operations / Project Evaluation

ArcGIS 8.x/9.x, ArcGIS Server, ArcObjects, Virtual Earth, C#, VB.NET, ASP.NET, VB6

Over 13 years of experience in the field of Environmental Consulting – EIA’s SEA’s, Audit etc., Waste Management & Ecological studies

Control & Instrumentation Engineer

Design Expert, Team Leader, Hardworking, Cost Control, Result oriented Instrumentation Engineer who can work on FEED/DD projects with equal proficiency.

Research & Development, Formulation, Manufacture, Maintenance, Project work

Working as a senior mechanical engineer having 19 years experience in hvac,fire fighting and plumbing

Over 16 years of wide and varied experience in the area of engineering consultancy for Design and Detail Engineering for Oil & Gas, Offshore / Onshore, Refinery, Petrochemicals, Alumna Plant, Pipelines, Gas Processing & LNG projects. I am fully conversant with all types of Process Control & Instrume

I am a Senior Environmental Project Manager (> 16 years experience) specializing in Environmental Remediation and Construction Management. My areas of expertise include project management, construction management, scheduling, document control, cost control, quality assurance, and quality control.

Skilled technician expert in Installation, Commissioning, Start-up and Maintenance over machines and equipments for Petrol, Pharma, Chemical and Oil&Gas sector.

WELL COMPLETIONS AND TESTING ENGINEER

engineering-mechanical-management- oil & gas

22 years mining maint expierience cat bucyrus komatsu and drills,6 years expat work in 4 countries in supervisory training superintendent planning roles , extensive MARC exposure .

Professional Engineer in corrosion, NDT, and failure analysis with 14 years experince

Skill Structural Designer with 20+ year of experience

Senior Manager educated to Bachelors degree in Welding Engineering with over 20-yrs of experience in the Oil/Gas Industry

22 years experience in engineering,construction,fabrication,installation both onshore and offshore for refinery, Petrochemical, Oil & gas, LNG and power plant

Seeking Senior Corporate assignments in Business Process Management and QHSE with an organisation of repute, involved in engineering procurement and construction of Mega project or Technical consultancy field of Oil & Refinery, Petrochemicals, LNG Storage Terminal, Cross country Pipelines,

Bachelor of Civil Engineering with Professional Designation

24 years of experience as a Cartographer, I am expert at Topographic maps and Nautical charts. I have designed and created atlas and sheet maps. I operate AUTOCAD to digitize maps and covert manual maps to digital maps. I am known for quality work, productivity, and organization.

Coal Executive with 30 years experience B.S. Mining Engineering 1980 Penn State University

I have got above 20 years of experience in mining field including 13 year oversas exposure, vell experienced in quarrying and control blasting operation, good with safety, management, record maintainence, billing, coordnation with clints. etc...

Long skills for work-over & completion well site supervisor , coiled tubing & snubbing too

Electrical / instrument designer

PDS and Smart Plant, Auto Plant(3D), Microstation, AutoCAD, MS Excel, Word etc.

Experienced Well site & Ops Geologist. Adaptable, strong inter-personal & communication skills, multi-disciplinary team worker. Follow up Operations Geology activity for Operated & Non-Operated assets, supporting Drilling & Completion. Can work independently with minimal supervision. B.Sc, Geology

Industrial Eng. with master degree in HSE. Title obtained: HSE eng. Specialist

Extensive open pit mining experience in most diverse and difficult cultures, in Africa , Central Asia ,India , hands- on project construction experience at a 40 Million USD Dephosphorisation Plant ,Acquisition of Mining properties in West Africa

First 1 2 3 4 5 6 7 8 9 10 11 [ 12 ] 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Goto Advanced Search...
Keywords: (e.g. mining engineer)		Find results with:

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out