CONTACT INFORMATION:
View contact information...
EDUCATION
Bachelor of Science in Electrical Engineering AUTOCAD Rel. 14.
University of the East, Manila, Philippines Infotech Computer School,Manila,Philippines
Calibration of Process Instrumentation
MERALCO Foundation Inc., Manila Philippines
PROFESSIONAL LICENSES/CERTIFICATIONS
Professional Electrical Engineer, 1994
Registered Electrical Engineer, 1987
Professional Regulation Commission, Philippines
SPECIFIC EXPERIENCES
ROBERT MATTHEWS-JOHNSON MARSHALL (DECEMBER 2006 to Present)
Dubai, United Arab Emirates
ELECTRICAL DESIGN ENGINEER
Project Description:
The company is multi-discipline composed of Structural, Architectural, Mechanical and Electrical Engineers. Involved in the development of Multi-storey Design of Hotel and Residential buildings in Saudi Arabia, UAE and Qatar.
Personally accomplished and currently on-going projects under my design supervision in coordination with other professional discipline.
Car Park A – 7 Storey, 3000 sq. meters in Abu Dhabi
Car Park B – 7 Storey, 2000 sq. meters in Abu Dhabi
District Cooling System in Dubai Marina
Cayan Silverene Twin Tower- 35 and 27 Storey Apartment Building in Dubai
Kolkata International Convention Center – Scheme Design
Projects involved IP-Based Home Automation System, Structured Cabling, Building Automation System, Fire Alarm System, complete package of Central Emergency Battery Systems, Public Address and Voice Alarm System, Security System and Lightning Protection System. Calculation of Normal and Emergency Lighting System via Dialux.
BEMCO QATAR (JUNE 2006 to DECEMBER 2006)
Doha, Qatar
ELECTRICAL PROJECT ENGINEER
Project Description Qatar Cool District Cooling Plant
Installation of 4 – 6 MVA, 11KV/3.3 KVsec, 50 Hz. Power Transformers and 4-1.6MVA,11KV/.4KV Power Transformers with 13 – 2500 Tons Chillers as a main source of cooling for newly built buildings around City Center. Provide Detailed Shop Drawings for the approval of Parsons International Qatar prior to implementation. Support our Quality Assurance Engineer in the Technical aspects regarding the pre-commissioning stage of the Plant. Coordinate with other trades in implementation of electrical works. Supervision of manpower. Inspection of accomplished electrical works prior to final inspection by the Consultants.
IRAQI-AMERICAN DEVELOPMENT (SEPTEMBER 2004 to NOVEMBER 2005)
International Zone, Baghdad Iraq
LEAD ELECTRICAL ENGINEER
Project Description: US Embassy
Job Description
Supervision of Filipino engineers and 60 electricians in the construction of temporary US Embassy by converting existing Palace of Saddam Hussein to an embassy. Replacement of existing 6 -1500 KVA, 11KV, 3 - Phase 50 Hz Transformers and Switchgears with new 6 – 1500 KVA in the North, South and Central Palace. Installation of new power, lighting loads and replacement of existing feeders and panel boards. Coordinate, attend meetings and scheduling of electrical works per KBR-Halliburton requirements. Provide shop drawings, as-built plans. Inspection of crawl spaces for the installation of new cable trays. Supervise 11KV termination and splicing. Installation of grounding system for LV and HV Systems. Personally wired protective relaying for 6 -Power Transformers, commissioning of UPS, and commissioning of 1- 18 Panel HV Switchgear and 3 – 5 Panel HV Switchgear.
AUTOCHIM SYSTEMS ABU DHABI (MARCH 2002 to MARCH 2004)
Abu Dhabi, United Arab Emirates
ELECTRICAL & INSTRUMENTATION ENGINEER
Job Description
Documentation, design, drafting, material take – off, estimates, procurement, as - built of plans, actual assembly, fabrication /wiring and termination of Fire & Gas Panels, calibration of field devices, pre-commissioning and commissioning of the system. On-shore and offshore commissioning of Fire and Gas Panel. Shutdown Commissioning of Fire and Gas Panel at Khatiyah Main, Khatiyah North, Fahahil Main, and Jaleha Main in Dukhan under Qatar Petroleum. Offshore commissioning of Fire and Gas Panel under ZADCO (Upper ZAKUM) in Abu Dhabi. Fabrication and Pre-commissioning of Fire and Gas Panel for Sirri Island, Iran. Engineering, Procurement, Installation and Commissioning of Fire and Gas Panel aboard vessel MARCAP 1 for Al- Bawardi, UAE. Pre-commissioning of Fire and Gas Panel for ZAKUM Crestal Gas Project at NPCC under Brown and Root, Halliburton. Offshore Shutdown Commissioning of Fire and Gas Panel for Total ABK under ABB Lumus Global and NPCC Interface connection with ESD utilizing RS-232 and RS-485 to convert analog to digital signals using WAGO Modbus Couplers.FAT(Factory Acceptance Test) and SAT(Site Acceptance Test) of Fire and Gas Panels.
GERMARR ELECTRICAL SERVICES & CO. (OCTOBER 1999 to FEBRUARY 2002/APRIL 1997-FEBRUARY 1998)
Manila, Philippines
OWNER
Project Description Project Management, electrical design, consultancy and construction of residential, commercial and industrial buildings.
Job Description Electrical design & project management of the following:
Alcatel, Philippines
Volvo Showroom, Philippines
Graceland Estates and Country Club, Philippines
EasyCall Main Office, Philippines
Informatics Computer Institute, Philippines
M. W. KELOGG (MAY 1998 to MAY 1999)
Algeria, North Africa
ELECTRICAL DESIGN ENGINEER
Project Description Oil and Gas Recovery Project
Job Description
Electrical design and calculation based on NEC, motor control design and inspection / QA / QC, material take-off and estimate, technical documentation, inspection of vendor-supplied panel boards, switchgears, transformers, MCC's and skid – mounted control panels for oil vessels, manual drafting of multi-layered cable trays, actual checking and inspection on wiring terminations at Marshalling Panels, actual installation and connection of high-impedance neutral grounding resistors, actual inspection of grounding system (impedance, separately-derived, isolated, instrumentation and control grounding), loop checking of process instruments.
KINDEN CORPORATION (AUGUST 1995 to FEBRUARY 1997)
Ho Chi Minh City, Vietnam
ELECTRICAL PROJECT ENGINEER
Project Description
Construction of 2 – 16-storey hotel and office buildings with 2 – 1500 KVA, 3-phase, 50 Hz, 15 KV pri / 380-220 V sec Power Transformers.
Job Description
Technically assigned in electrical design and implementation of power, lighting and auxiliary systems for building automation system, revision of plans, design and provide electrical shop drawings for implementation, conduct site inspections, attend meetings and coordinate sequence of works with other trade contractors and monitor progress of electrical works.
OMNI HOTELS ASIA PACIFIC (DECEMBER 1993 to MARCH 1994)
Ho Chi Minh City, Vietnam
ASSISTANT TECHNICAL MANAGER
Project Description
USD 30 Million 8-storey hotel project with BMS, BGM, FAS, PAS and MATV.
Job Description
Supervised Vietnamese personnel for hotel maintenance, handled the operation of 400 ton chiller, steam and hot water boilers, AHUs, pumps, supervised the maintenance and daily monitoring of two substations (2 – 1250, 3-phase, 15 KV pri / 380-220 V sec Cast Resin Transformers and 2 – 1150 KVA, 3-phase, 380/220 V, 50 Hz Generator sets.
SHINRYO CORPORATION (MARCH 1993 to DECEMBER 1993)
Ho Chi Minh City, Vietnam
ELECTRICAL PROJECT ENGINEER
Project Description
Rehabilitation / major renovation of existing 8-storey building
Job Description
Electrical design for power & lighting, actual terminations of telephone cables, actual termination of fire alarm, paging and BGM system and supervision of manpower.
AMALGAMATED PROJECT MANAGEMENT SERVICES INC. (NOVEMBER 1991 to February 1993)
Manila, Philippines
ASSISTANT ELECTRICAL DESIGN ENGINEER/ DRAFTSMAN
Project Description
Electrical design of Ateneo de Naga, Project Management for the development of 109 hectares Light Industry and Science Park of the Philippines.
Job Description
Electrical design and drafting prepared and composed electrical bid documents evaluated bids, evaluation of billings and conducted electrical site inspection and appraisal of existing building.
M.A. ALIX AND PARTNERS (JANUARY 1990 to October 1991)
Manila, Philippines
ASSISTANT ELECTRICAL DESIGN ENGINEER/ DRAFTSMAN
Project Description
Electrical drafting and design for residential, commercial and industrial buildings and coordinate plans with Architects and other trade contractors.
Job Description Electrical Design of the following establishments:
Far East Bank and Trust Co., Makati, Philippines
Philbanking Corporation, Makati, Philippines
31- Storey Citibank Tower, Makati, Philippines
27-storey Trafalgar Tower, Makati, Philippines
City Trust Bank Building, Makati, Philippines
2 x 31- storey Wack-Wack Twin Towers, Philippines
ROMAGO INC (APRIL 1988 to October 1988)
Mandaluyong City, Philippines
ELECTRICIAN
Project Description
Electrical construction of 31- Storey Pacific Star Building, Makati, Philippines
Job Description
Member of electrical crew for the installation of wiring for power and lighting, panel boards and switchgears, enclosed circuit breakers, busways and lighting fixtures and megger testing of circuits and cables.
TRAININGS AND SEMINARS
H2S and Breathing Apparatus Seminar Qatar Petroleum / Onshore
H2S Seminar ZAKUM Development Corporation / Offshore
H2S Seminar Total Fina / Offshore
H2S Seminar Al Bahar / Bunduq Project / Offshore
Sea Survival Training (Dec.15, 2003) Emirates Technical and Safety Development
Center, Abu Dhabi
Helicopter Escape Underwater Training (Dec.16, 2003 ) Emirates Technical and Safety Development
Center, Abu Dhabi
Phil. Electrical Code: Grounding Systems & Overcurrent Protection
SPECIAL SKILLS
AC and DC Short Circuit Calculation, Grounding Systems
Harmonic Analysis Software
Three-Phase Motor Rewinding
Conversant with the National Electrical Code (U.S.) and British Standards
MS Word, MS Excel, AutoCAD 2008, Isometric Manual and AutoCAD Drafting
Pre-commissioning, Commissioning and Interfacing of Fire Alarm Systems
Autocad Isometric Drafting and Detailing
SPORTS ACHIEVEMENT:
Finisher-Dubai Marathon 2009, 42.195KM, January 16, 2009
Play Chess Blindfolded
View contact information... |