Resume - Instrument design wihin oil and gas industry. Using Intools and CAD packages.

Misco Jobs

Resume #79924

CONTACT INFORMATION:
View contact information...

Academic attainment:

HNC Mechatronics – Kingston College, 2005
NVQ level 3 in Design and Drafting
ONC Process Plant Engineering – Richmond College, 2003
ECITB – BTT (basic technician training) –Richmond college, 2002
Key skills – IT, communications, maths at level 2, 2002
GCSE – 11, grades A to C

Other skills/ training:

PDMS design and drafting course run by Aveva
AutoCAD
Intools training
Microstation
Propid
ECITB National Safety Passport – 2 day course covering health and safety in the office and on site.

Professional Experience Resume

I have worked within the oil and gas and process plant industry for the past 7 & 1/2 years. Involved with the design of instrumentation on a plant. I have been involved with conceptual and detailed design. As a designer I have produced all necessary deliverables required on a job within the company and clients procedures, and to the correct codes and standards. I have used all CAD packages including PDMS and 2D CAD programs such as AutoCAD and Microstation. I have used Intools database application extensively on jobs.

February 2008 – November 2008

MW Kellogg – Karsto expansion project

I worked mainly on the Utilities side of the expansion project. This was given to me and my lead to look after, so workload was high. This meant building up all design from P&ID level. Once getting all necessary deliverables approved for design level I started to populate the database from the ground upwards. This then lead to me executing all terminations for site and produced all reports from Smart Plant Intools. I then worked closely with necessary package engineers and in-house client demands to get all up-to-date information. Naturally there were changes and these we're done efficiently and to the highest standard that could be achieved. I also produced all other necessary deliverables that would have gone to site.

November 2006 to February 2008

Worley Parsons – Sakhalin Island

Working close with the Lead Instrument Designer I executed on a regular basis all deliverables for construction. This including Instrument location layouts, cable routing layouts, all types of hook-ups whilst constantly updating the associated schedules e.g. Manifold schedules or cable schedules. This all lead on to the job of keeping Smart Plant Intools data up to date and also terminating all connections and producing reports from this. This helped when considering drumming for cables.

January 2006 to October 2006

Snamprogetti LTD – Bonny Island Train 7

While working on the FEED for the extension of Bonny Island project my role as instrument designer involved gathering historical data/information on existing plant and then produces Field Auxiliary Room layouts alongside underground instrument cable routing layouts. Working closely with electrical, piping and structural on equipment sizing and existing underground piping/electrical routing and building foundations.

Samir Upgrade project

Existing plant that needed extra units for higher production where amine regeneration was concerned. Liaising with piping and underground structural departments; produced all instrument layouts and associated primary and electrical hook-ups. I completed all instrument termination diagrams to the preferred format and completed MTO's for cable lengths and specs. This included both DCS and EFD systems.

August 2001 to January 2006

KBR Halliburton, Leatherhead
Instrument designer
Control systems – Azeri projects and Shah Deniz onshore terminal

Within the four years that I was at KBR I went from associate drafter to instrument designer and completed my training through them. I worked in both electrical and instrument departments and used all CAD packages to interpret engineer sketches. I also produced all deliverables for the client such as termination, interconnection, loop and block diagrams. I used INtools to create reports and also used it to create drawings and wiring, loop generation. I also used PDMS to design the layouts of equipment on all onshore terminal equipment rooms. And created all necessary racking for low/high voltage cabling around the plant. On one of the phases of Azeri I used compcon database to input all vendor G.A. dimensions into a catalogue and was responsible for all phases and reported to site queries. My first year I attended the Process Plant & Engineering Course at Richmond Upon Themes College, where I studied all aspects of piping, structural, electrical work and project management while gaining firsthand experience with welding and fabrication.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 7901 to 7950 of 15508)

Go to Search Parameters...

Brief Description

Dipolama in mechanical engg Pro/Engineer/Autocadd/Soildworks

10 years of experience in oil and gas industry. Experience in mud logging and working on service rigs. Extensive experience in planning and executing well completions, drill stem tests(Open hole and cased hole), rig and rigless intervention; Artificial lift; budgeting, tendering and evaluation

Field Investigation, sample collection, Watershed protection study, Groundwater management, Maps, Cross-section & Report creation

Senior PDS and/or PDMS Structural Designer. Experience in all aspects of design; from conception of design (FEED), layout work to detail design in the Oil and Gas (onshore/ offshore), Refinery/Petrochemical plus Power Generation industries for EPC&M companies in Europe, Asia and Australia

IT Manager

I am a civil engineering diploma holder with 8 years exp.in high rise residential and commercial buildings.

Several years of experience in CAD drafting in wood carpentry including 10 months work in Middle East, at present I work as Bulk Handling Design Engineer in a European company, part of my work is to design bulk handling system of cement cargo ship and supply vessels including loaders and unloaders,

Diploma in Electrical and Electronics Engineering ¡V 3 Years

I am interested in continuing within electrical, instrumentation and administration or even any place related because I am flexible to learn, and make myself marketable in the industry and commercial, etc. I have excellent skills and strong sense of environmental and safety issues.

Strong in mechanical,electrical and plumbing.mobile or fixed equipments or engines are my categories where I am efficient as a hard worker, innovative, result oriented

Dual Trade mechanical fitter, steel fabricator, welder with supervisory experience. I have a keen in safety and have been a safety supervisor on jobs before.

Ihave an experiece of more than two year in desiginig of heat exchager and pressure vessel in an oil and gas fied andmy objective is to work with an organisation that can utilize and sharpen my skills in Mechanical design(pv elite software), Thermal design, Process design

I am an highly versatile and enthusiastic individual. Self motivated with a confident, friendly and sociable personality.I'm a supportive team member who also works well on own initiative.I am able to work under pressure and prioritise heavy workloads.

Piping design an stress analysis

December 2008 graduate of Texas A&M University with a degree in Petroleum Engineering. I am seeking full time employment as a Petroleum Engineer in the oil and gas industry. Please find my resume attached to this email, I look forward to speaking wit

Acoustic operator/Search and Rescue Instructor/Sonar operator

Red Seal Millwright, Class 1 Drivers Liscense, Mine Rescue, First Aid Ticket, H2S Alive, Whimis, Confined spaced entry and rescue, Fall protection.

ABILITY TO DRAW AND INTERPRET ENGINEERING DRAWING

Corrosion/ Material/ Metallurgical/ QA/QC Engineer

To contribute to my Organization's success through the use of effective customer,managerial and people skill.To serve reputable Organizations with an undying passion for excellence and creativity.

NVQ level 2 Scaffolder with 8 years experience and offshore experience. Offshore survival and full medical

Advanced skills for professional design in 3D (Autodesk Inventor 2009)

Heavy duty mechanic

Oil and Gas Equipment supply

Mechanical Draughtsman with Diploma in echanical Engg. 5 yrs. Exp.

Computers, home building from foundation up. Media instalations (cable industry work)

Experienced workover rig driller looking for international or domestic work as the western Canadain oilfield has slowed down. I am hard working, a quick learner and very adapable to new surroundings. As you can see from my resume, I am a dedicated and loyal employee as well.

Skills include Lease Negotiations, farm ins and farm outs, JOAs, Oklahoma Corporation Commision forms and requirements, Pooling Orders, Division of Interests, Due Diligence, Title Curative, Ownership Reports.

Qualifications & Skills: Title Runsheets, Lease Take Off's, Ownership Rpts., Lease Acquistions and Due Diligence

structural drafter or designer, preferably on the offshore indestry.

Bulldozer Operator, performed pre and post operation of the bulldozer

I am looking for a career within a company that promotes from within and encourages continuous learning as well as where my enthusiasm, drive and knowledge will be a valuable asset.

Skills- Creative and Innovative, Good Communicative Skills. Ability to Work under Pressure. Ability To Mobilize And Supervise People. Strong in Team spirit. Microsoft Office software and the Internet, , Qualificatiions- Higher National Diploma (HND) in Insurance (Lower credit), 2007.

Instrument design wihin oil and gas industry. Using Intools and CAD packages.

I have been working for 6 years on inland drilling rigs. I worked my way up to driller last year & have 4 years exp. as a derrickman.

B.Sc Honours Mining Engineering

Senior Cased Hole Wireline Engineer

Conducting baseline Survey, Conducting technical and Enviro legal study,Modeling of Air impacts using ISCST 3 and CALINE 4 for evaluating the proposed change in concentration of various pollutants, ,Conducting Public hearing Preparation of EMP (Environment Management Plan), M.Sc environemnt science,

Welding Inspector/Trainer/Supervisor

Deepwater Completion engineer

Master Electrician

ERZ Controller (Underground Deputy)

20+ years exp and Involved in the commissioning of Copper/Gold Mine, Barrick Buzwagi

Over 25 years experience in the pipeline construction industry. Positions held range from heavy equipment operator, superintendent, foreman, & utility inspector. Qualifications listed with ISNetworld, OSHA Safety certifications

11 years of experience in Project Cost Control on Saudi Aramco Projects in Saudi Arabia. Presently working for Saudi Aramco thru secondment.

+16 yrs of experience in EPC/PMC, TPI Quality control & in Construction Companies. Having well experiences for various stages wise Inspections involving Pressure Vessels, Storage Tanks, A/G & U/G Piping & Structural Steel Works. (ONSHORE & OFFSHORE).

Comprehensive drilling experience of 11+ years in various locations worlwide with E&P Operators. Four years experience as Drilling Supervisor offshore Thailand and Gulf of Mexico. Seven years Drilling Engineering experience onshore and offshore, includes day to day rig operations management.

BSc Hohours Degree in Mining Engineering, Now working as Planning Manager for an Open Pit operation. Very good in Planning , using Surpac Mining software.

Production Technology, Completion Engineering, Well Testing, Nodal Analysis, Flow Modelling & Production Optimization

My experience in construction 6 years with contactor company.

First Prev 151 152 153 154 155 156 157 158 [ 159 ] 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 Next Last

Seach Parameters


Goto Advanced Search...
Keywords: (e.g. mining engineer)		Find results with:

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out