Resume - HVAC Field Service,BAS,DDC

Misco Jobs

Resume #79925

CONTACT INFORMATION:
View contact information...

HVAC Field Service,
BAS/DDC Controls Technician

Mark Amerson

2820 Prospect Parkway
Durham, North Carolina 27703
(919)408-6184

havcchamp@yahoo.com
Valid U.S. Passport
Active Interim Secret Clearance
Seeking overseas assignment

SPECIFIC WORK/TASK EXPERIENCE

9/07-3/08
Man Tech International
Environmental Controls Technician
Balad Airbase, Iraq
I provided direct HVAC support to the Army at the Regional Support Center in Iraq. My function was to maintain and service the Army's A/C Systems. They are commonly referred to as Environmental Control Units. Repairs made to these systems included troubleshooting the Electronic Motor Controller,new compressor installation and replacing failed electrical switches. Other duties on the AMC Site were to service the Sprung structure 20 ton Commercial Package units which provided 10 KW electric heat. I also served as the back up Power Gen Set technician.

7/06-7/07
Aecom
HVAC/R Specialist
Bagram Airbase, Afghanistan
HVAC Foreman over 8 Third County Nationals and 2 expatriates. As lead mechanic I implemented a refrigerant recovery program. This program involved refrigerant accountability and recovery. I also served as back up Gen Set Tech. As lead Technician I trained all technicians on the new Inverter Heat Pump (410 A refrigerant)units. Plumbing supervisory duties included overseeing Hot Water Tank installs,their electrical,and plumbing circuits. Troubleshooting septic systems,inoperable water pumps,and blocked condensate drain lines were also part of my duties. In this role I received The Afghanistan coin of appreciation from the Base Commander LTC Dixs.

4/05-4/06
KBR
HVAC Mechanic/ Appliance Technician
Bagram Airbase, Afghanistan
Supervisor of Local National workforce (10) assisting in HVAC operations.
The HVAC Department was responsible for all units at Bagram. Units that I had to troubleshoot were WILMS heaters and heat pump systems (2-4 tons). During this time I was called to trouble shoot Dining Facility systems. This would include server line warmers, walk-in refrigerators, freezers, and range hood ventilation systems. As part of the HVAC Department I received a certificate of appreciation.

4/04-4/05
United States Army
52 Charlie Utilities Equipment Repair/HVAC Technician
My function was to maintain and repair the Army's HVAC systems. Duties included operation of the Robin Air recovery/recycle unit. Mechanical repairs performed included the replacement of a failed compressor,evacuation, and subsequent recharge of the A/C system Failed electrical switches that were at fault were isolated and then replaced. I also received training as a 52 Delta Gen Set Technician.

3/03-4/04
40 Realty Associates
HVAC Technician/ Electrician
Primary duties included oil burner maintenance. Maintenance practices were nozzle cleaning, electrode alignment and filter cleaning. Electrical repairs included breaker replacement, ruff-ins,and the light fixture installation. Additionally I would wire 220/120 volt circuits for newly installed A/C Systems. During this time period I also served in the New York National Guard. My Military duties allowed me to troubleshoot and service the Army's HVAC/ECU systems.

8/01-3/03
J and J Electrical
Electrician
Duties included the installation and wiring of disconnect box's that provided power to the HVAC unit. Many of my responsibilities called for me to wire switches,wall receptacles,feeder panels,and replace faulty circuit breakers. Additionally I performed the change of service/upgrade from fuses to breakers in residential homes. During this time period I also served in the Virginia National Guard. My Military duties allowed me to troubleshoot and service the Army's HVAC/ECU systems.

4/01-8/01
U.S. Army Ordnance Tactical Center
Duties included operation of the Robin Air recovery/recycle unit. Mechanical repairs performed included the replacement of a failed compressor,evacuation, and subsequent recharge of the A/C system Failed electrical switches that were at fault were isolated and then replaced. I also received training as a 52 Delta Gen Set Technician.

1/98-2/01
T and B Mechanical
HVAC/Appliance Technician
While employed I serviced residential 5 ton Heat Pumps and 15 ton Commercial packaged units. I also performed Shop work where I would refurbish various types of restaurant equipment. Mechanical and electrical repairs were performed on drink dispensers,water coolers,walk in refrigerators and kitchen/range ventilation systems.

CERTIFICATIONS
American Society of Heating,Refrigeration,A/C Engineers
Thermal Comfort.
ASHRAE/IESNA Lighting Requirements Standard 90.1-2004, 2007.
ASHRAE/IESNA Mechanical Requirements Standard 90.1-2004, 2007.
ASHRAE/IESNA Envelope Requirements Standard 90.1-2004, 2007.

Department of Defense
CFC/HCFC Universal Technician.
Refrigerant Recycle and Recovery.

Heating and Refrigeration Distributors International
Installation Residential HVAC/R systems.
Troubleshooting Residential HVAC/R systems.
Commercial Refrigeration.
Refrigeration Low voltage controls.

Mobile Air Condition Society
EPA Refrigerant Recovery and Recycling CFC-12
EPA Motor Vehicle A/C Technician (ASE)

Contruction Education of New York State
Overview of Construction Documents
Construction Documents
Agreements, Contract Document and Document
Project Delivery Concepts
Conditions of the Contract
Procurement and Project Document Modifications
Procurement and Contracting Requirements
Formats
Drawings and Specifications
Measurements, Payments, Submittals
Quality Requirements
Fundamentals and Methodology
Preparing PART 2 Production & PART 3 Execution
Preparing PART 1 General
General Requirements
Methods of Specifying
Producing a Project Manual
Project Delivery Systems
Coordination of Construction Documents
Changing Construction Documents
Project Environment
Construction Documents
Basics of Product Representation
Product Representation Tools and Techniques
Product Representation During Design
Product Representation During Procurement
Product Representation During Construction
Payment, Modifications, Claims and Project Closeout

Auto Desk
Revit® Architecture Creating and Modifying Schedules

Architectural Engineers Construction
Designing Pathway Spaces Communication/Cables Power Distribution
Introduction residential light control
Lighting Solutions for Healthcare
Light control solutions healthcare applications
Energy Efficient Street Area Lighting
Energy Savings Through Indoor Air Movement
NFPA 13D Installation fire sprinklers in 1 & 2 family home
Appliances & The Green Home
Modular Refrigeration: Functional, Flexible, Custom Design
Principles of Universal Design Housing/Home Appliances
Life-Saving Design: Advanced Egress-Routing Systems
Underfloor Air Distribution Systems
Cool Roofing Solutions to National Energy and Environmental
Elevator Technology
Downdraft Ventilation
Home Elevators

Panasonic Security Training
WV-NW484S i-Pro Network Color Dome Camera
WJ-ND300 Network Video Recorder
WV-ASM100 i-Pro Management Software

Mainstream Engineering
H.V.A.C/ Refrigeration Preventive Maintenance Technician.
HFC- 410 A Handling, Use, and Recovery.
Indoor Air Quality Technician, (IAQ)
A/C Motor Vehicle Technician, (MVAC)

New York State High Performance School Design
Water Management and reuse
Special HVAC Systems, Equipment and Controls.
Maintenance Operations of HVAC and Mechanical Equipment.
Building Commissioning.
Thermal Loads and Comfort.
Renewable Energy Systems.
Ventilation- Natural and Mechanical.
Water Management and Reuse.
HVAC System Design and Selection.
Electric Systems and Lighting.
Lighting Design.
Sources, Luminaries, and Controls.
Lighting Strategies and Tools.

Fire Department of New York City Certificate of Fitness
Liquid Petroleum Gas.
Medical Gases.
Air Compressor Operator..
Cryogenic Refrigeration Store, Handle, and Use.
Low pressure Boiler Operator.

ATS Heavy Equipment Operator School
Level I: Backhoes, Wheel Loaders, and Dump Trucks.
Level II: Bulldozers, and Scrapers.
Level III: Excavators and Motor Graders.

Lighting Controls Association
Dimming Controls and Systems.
Occupancy Sensors.
Load Schedule Control.
Fluorescent Dimming.
Dimming by Design.
Daylight Harvesting by Design.
Lighting and LEED-NC.
Compliance with Controls.
Hi-Bay Lighting Upgrades.

United States Department of Energy Building Codes
Advanced Energy Design Guide: Envelope Overview
Advanced Energy Design Guide: Mechanical Overview
Advanced Energy Design Guide: Lighting.
Advanced Lighting and the Energy Code.
Alterations 90.1 COMcheck.
Mechanical Requirements of the 2006 IECC.
Commercial Lighting Requirements of the 2006 IECC.
Commercial Envelope Requirements of the 2006 IECC.
Exterior Lighting Requirements and COM check.
How to Use COMcheck.
How to Use REScheck.
Log Homes in REScheck.
REScheck for the 2006 IECC.
Residential Requirements of the 2006 IECC.
Vestibules: Understanding the Commercial Energy Code.

American Petroleum Institute
Distributed Control Systems.
Single Loop.
Multiple Loop.
Pneumatic Controls.
l/O Communications.
Programming Controllers.
Systems and Integration.
Smart Controllers.
Human Interface Device.
Field Device Laptop PC configuration.
Field Device Analog configuration.
Field Device Digital DCS configuration.

PDH Engineer Center
Data Communication for Digital Processes.
Integration of Control System Devices.
Computer Networking.
HVAC Controls.
Geothermal Heat Pump Systems
Refrigeration Chiller Systems.
Variable Air Volume Systems.

Instrumentation, Systems,and Automation Society
PLC Programming.
Motor Drives Variable Speed AC.
Process Controls.
Electronic Maintenance.
Boiler Operations.
Air Handlers-Mechanical Systems.
Cooling Towers Trouble shooting and Maintenance.
HVAC/R Chiller Mechanical Components.
Chillers Leak Check/Electrical.
Communications and Advanced Programming.
Input and Outputs.
Logic Fundamentals,Types and Applications.
Mechanical Electrical Lockout Controls.
Mechanical Electrical Electronic Controls.
Mechanical Electrical Control Schematics.
Mechanical Electrical Responsive System Controls.
Mechanical Electrical Energy Management.
Mechanical Electrical Design and Troubleshooting.
Mechanical Electrical Control Systems.

Siemens Energy and Automation
Motor Control Centers.
AC Drives.
DC Drives.
Sensors.
Load Centers.
Surge Protection.
Safety Switches.
Circuit Breakers.
Panel Boards.
Power Monitoring.
Busway.
PLC's.

Contemporary Controls
Industrial Ethernet Technology

Industrial Networking University
Basics of EtherNet/IP
Advanced EtherNet/IP
Basics of DeviceNet
Advanced DeviceNet
MODBUS RTU
Basics of Modbus RTU
MODBUS TCP
Basics of Modbus TCP
BACNET
Basics of BACnet

COLLEGE/TECHNICAL TRAINING

TCI College
H.V.A.C/Refrigeration Technology
2004

H.V.A.C/Refrigeration Technology Diploma
Penn Foster College
2002

H.V.A.C/R Electric Motors
Richmond Technical Center
2001

SIGNIFICANT
HVAC EQUIPMENT:
Army Environmental Control Unit (E.C.U)
6,000 BTU Vertical
9,000 BTU Vertical
18,000 BTU Horizontal
36,000 BTU Horizontal
60,000 BTU FDECU Horizontal
Coolex Package Unit 15 Ton (460 Volts, 3 phase) Military Sprung application
Climatcool Package Unit 15 Ton (460 Volts, 3 phase) Military Sprung application
LG Package Unit 15 Ton (460 Volts, 3 phase) Military Sprung application
York Heat pump package unit 20 ton (460 Volts, 3 phase) Military Sprung
Chigo ¾ and 2 ton Heat Pump 9,000 24,000 (120, 220 Volts 1 phase)
Samsung 1 and 2 ton Inverter Type Heat Pump (220 Volts 1 phase) 410 A refrigerant

I am willing to consider other locations in the U.S.
I am willing to consider other international locations.

Location Preferences:
Africa
Asia
Middle East

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 5551 to 5600 of 15477)

Go to Search Parameters...

Brief Description

PATRAN-NASTRAN, SACS 5.1 & 5.2, STAAD V8i, SESAM(GENIE) NAUTICUS, AUTOCAD, MS-WORD, MS-EXCEL, MS POWERPOINT, WINDOWS-XP, 2000, 98

bachelor of engineering (mechanical)

welding by an electric arch and welding by gas.The experience of work over 10 years.

Instrument Engineer (KNPC- Kuwait National Petroleum Company)

Direct and supervise work of subordinate members of surveying parties.

Piping Designer/Construction Manager

Turnover engineer skill gained through varied qualifications and experiences in the field of Commissioning and HSE.

Slick line Operator , QHSE Trainer , Crane Operator

Piping Design Enginee,PDMS,PDS

I can work any where on a drilling rig, Driller,Derricks,Motors,Floors ect.

B.E. (Instrumentation technology) from Visveswaraiah Technological University, Belgaum, Karnataka. Diploma in “Total Quality Management” course from NILEM

A highly motivated and dynamic Civil engineer with 10 years of experience in designing commercial and industrial structures. I am looking for a position of Civil Engineer/ Design Engineer in an organization where my experience and knowledge can be used to the best.

Have more than 10 years working i construction firm in Singapore as a M&E trades

Over ten years hands -on experience in XRF spectrometry in cement and steel industry

HVAC Field Service,BAS,DDC

QUANTITY SURVEYOR

I believe that my key qualities are my excellent interpersonal skills and strong communicative ability, combined with my talent for effective organisation and prioritisation.

Make a Job Safety Analysis and Standart Operational Procedure and Permit Works.

work in Saudi Arabia Israel Dubai Oman Lubia South Africa

14 years experience combined as a mill operator and mill supervisor

Seismic Interpretation - SMT Kingdom (2 years), Landmark (occasional), mapping and gridding - Petrosys. Microsoft Office (all areas).

Mining Engineer with 5 years mining experience

Professional Experience Mainly related to Industrial and Oil Jobs

Piping Layouts, AutoCad and PDMS

MBA in SCM, Excellent Command in MS Office.

I am looking for the opportunity to utilize all of my skills as a safety specialist- occupationally and behaviorally and HSE safety trainer. I am very interested in the global possibility in my field. I have 11 years experience in the petroleum industry and 8 of those years involved in HSET.

Electrical Engineer 10 years of experience in Projects in Oil& Gas,Refineries,Fertilizers,High Rise Buildings

EIT

Diesel mechanic, hardworking and 11 years experience

I am a mainer engineer working with bp shipping, uk and wishing to shift my career to shore based job

5 yrs experience in Piping & stress analysis

Columbia MBA with Research and Journalism Background

I am an Instrumentation & Controls Engineer and have almost 2 years of experience in the Oil & Gas Engineering and Services field. I have a Masters degree in Communication Systems (Electrical Engg). As an Instrumentation Engr, i was responsible for Engineering Design and Specifications.

Engineering technician

5 years working experiance as a QA/QC Engineer

Gold madelist in MS process engineering and Bsc Chemical Engineering. i am familiar with almost all the chemical engineering softwares and have a good experience of using them. I can diagnose a problem esily and propose the solution to that problem effectively

My background has afforded me many "intangible" qualifications one can't learn from a book. Qualities such as resourcefulness, team leader, adaptability, pride, and common sense are just a few; protocol including integrity, accountability, and a honest work ethic make me a cut above the rest.

Pipe Stress Engineer

My major skill is mangement and idi Master in Management science

Detailed Engineering, INtools(User & Administrator Module), 3D PDS, SPR, Navis works.

Plant Design Engineer

Desiging of new control system/smart instrumentation system,ESD/DCS/PLC/ based system,

Well Planning, Log Interpretation, Geosteering of horizontal - deviatedated - vertical wells. Excellent userof IT Application Software.

A full-time position in HSE where I can demonstrate my knowledge and skills and effect continuous improvement in performance utilizing my 12 years experience as HSE Advisor (Advising on EHS, investigating/reporting, EHS training, statistics, management experience).

With an environmental engineering degree Ms. Shambulova has experience in research engineering projects and programs related to environmental impact assessment, audit, monitoring, risk evaluation, management, health and safety and other social and economic, design, and engineering and standardizatio

Willing and able to perform ones job with less supervision

PhD. Mechanical Engineering. Msc. Reservoir Engineering. BSc Chemical Engineer. Fluent English, Portuguese and Spanish. Experience with oil Recovery Processes and Reservoir Simulation. Focused in Reservoir Engineering/Oil & Gas Research Industry.

Well Testing with Data Aqusition Supervisor with 10 years experience in Schlumberger and MB petroleum compaqny.

Environmental monitoring and assessment, M.SC.(Chemistry), P.G. Diploma in Environmental Management

I have a National Higher Diploma in Extraction Metallurgy and currently studying towards a BSc Hons in Metallurgy at the University of Pretoria. My current tasks involve plant optimisation, risk assessments, health, safety and quality, budgetting, compilation and reviewing of work instructions.

First Prev 101 102 103 104 105 106 107 108 109 110 111 [ 112 ] 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 Next Last

Seach Parameters


Goto Advanced Search...
Keywords: (e.g. mining engineer)		Find results with:

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out