Resume - Coatings & Corrosion Engineer "NACE"

Misco Jobs

Resume #80056

CONTACT INFORMATION:
View contact information...

CORROSION, COATINS & INSPECTION ENGINEER

Date of Birth: 23rd April 1970 (38yrs)

Nationality: British. Languages: English, Spain (minimal)

EDUCATION

IOSH safety Management Certification. Certified Oxford Instruments
BOSIET/OPITO Basic Offshore Safety Positive Material Inspector (PMI).
Induction & Training Inc. Certified Nace International
LAPP Combined Lifejacket and Re-breather. Coatings Inspector No 7736
City & Guilds 619 Painting Technology Certified under Lloyds of London.
Coatings & Thermal Insulation Engineering. Inspection for Corrosion / Protective

PROFILE

Currently holding a Senior Membership from "National Association of Corrosion Engineers" (NACE) and has attained high level recognition from my Peer's within the institute and therefore gaining certification of proficiency as a Certified Coating Inspector/ certified by Oxford Instruments as a PMI operator.
In addition, Wilson is an experienced Engineer/inspector with sixteen (16) years of working knowledge within the Corrosion sector with extensive knowledge and hand on experience in application and supervision methodology.
Fully conversant in the needs and requirements set out in 1SO 9001, Nace Standards, SSPC, ASTM, ISO, CINI, PIP API, ASME specification & Codes associated with corrosion related issues.
Experienced and capabilities to supervise monitor and control activities:

X-Ray & Gamma Radiographic Services/Partnerships. Ultrasonic inspection and testing.
Magnetic Particle Inspection (MPI). Liquid Penetration Inspection.
Eddy Current Inspection. Positive Material Identification [PMI™].
Visual Inspection – Boroscope/Fibroscope/CCTV. Pre and post weld Heat Treatment.
Close Area Radiographic Device (CARD). Digital radiography.
MFL Tank floor inspection Time of Flight Diffraction. Guided wave ultrasonics
Automated and semi-automated corrosion mapping. Tube inspection – IRIS / MFL
Remote field & Eddy Current.

Having good organisation skills, and being able to work under pressure to deliver a qualifying product.
Competent to a high level of investigation and report writing Inc "lesson learned"
Enthusiastic team player, who is respectful of others opinion and is always willing to develop my learning skills.

CAREER HIGHLIGHTS

2006, solely developed and successfully patented a breakthrough technological process using Digital Radiology Imaging (DRAD) for the task of accurately inspecting composite wrap systems, which enables extremely accurate & quantifiable mapping/monitoring data to which subsequently determines the current status of both the questioned substrate and that of the composite material applied for integrity.

FURTHER EDUCATIONAL CERTIFICATE & ACHIEVEMENTS

IOSH Management safety Certification. 2007. Certified (EX-MET) PMI operator 2006.
BOSIET /OPITO basic offshore safety Nace International Coatings Peer Review.
Induction & Training course No AB-0305100057299 Nace International Coatings CIP Level 2-3.
1989, Construction Industry Training Board (CITB) Nace International Coatings CIP session 1.
Trade test -98%-
1988, London Inst of City & Guilds 619 Insulation craft. Practical & Written Examination, -1987,
London Inst of City & Guilds 619 Insulation craft Distinction-. Practical & Written Examination, -Double 1986-1989, 4:1 weeks release, Cardonald College Distinction-.
City & Guilds 619 Apprenticeship training. 1986-1990, 4 years training in craft apprenticeship, Kitsons Insulation Cont, Pilkington Grp.

EMPLOYMENT HISTORY:-

AUG 2008 – PRESENT INDUSTRIAL SERVICES LTD SPECIALIST MANAGEMENT DIV.
CORROSION DEPT HEAD

Assignment: Bahrain and GCC region.

As Department head I was mainly responsible for daily direction of the dept in so far a monitoring and inspection works associated with existing contracts. Over and above I was required to market and acquire new business for the company.
Our operations consisted, of training and implementation of techniques and application and standardization program to aid in development and correct method of application of local trainees.
Corrosion inspection PMI & NDT processes and techniques and presentation of company abilities and resources through client workshops.
Perform daily monitoring of corrosion teams, review report and activities sheet, waiver application (if applicable) method statements, QA/QC procedures and ITP prior to submission to client.
Implementation of RBI process and monitoring of same, identification of Risk Based Management through Inspection activities to reduce Risk Factors. Note: (Only assigned under a business visa therefore no NOC required)

JAN 2008 – AUG 2008 ABDUL RAHMAN AL-OTAISHAN GRP.
OPERATION MANAGER

Assignment: Jubail Industrial City Saudi Arabia.

As Operation Manager, I was responsible for overseeing existing Corrosion and contracting Division to control and monitoring of NDT and corrosion activities on projects mainly SABIC and Saudi Aramco. The group have a five year contract to supply services and materials on 37 facilities throughout the Jubail & Yanbu industrial areas. My main role was ensuring that all aspect of specification and needs of the client was achieved and delivered in accordance within the required budgets and schedules previous submitted. Note: (Only assigned under a business visa therefore no NOC required)

EMPLOYMENT HISTORY (cont)

NOV 2006-JAN 2008 FOSTER WHEELER ENERGY LIMITED.
SENIOR CORROSION/COATINGS ENGINEER.

Assignment: SHARQ 3RD Expansion Project Jubail Industrial City Saudi Arabia.

Responsibilities Included but not limited to overseeing all aspects of works in so far as Insulation and protective coatings, corrosion control, CP systems, Fireproofing reviews on SHARQ 3RD Expansion Project in Jubail. Saudi Arabia.
Key roles and responsibilities:
Conduct monitoring and inspection of piping, equipment coatings inc. cathodic protection and insulation (hot & cryogenic) activities from fabrication shop and site activities.
Reviewing of structural steel fire-protection review and classification as per hazardous criteria layout data. Review and quantify prior to submission to clients. Materials & sub-contractor approvals, Technical deviation reviews concession reviews inc issuing of variation instruction. Review of method statement/ ITP/QCP and HAZCON prior to commencement of works. Day–day inspection and field monitoring of both task specific as above and general health and safety and environment requirements through programs such CORE investigation.
Note: (Only assigned under a business visa therefore no NOC required)

MARCH 2005 – OCT 2006 INSPECTION SERVICES (SCOTLAND) LTD.
OPERATION MANAGER / INSPECTOR.

Assignment: Various UK and overseas. Inc Alberta Canada.

Performing Inspection reviewing needs of operation and maintenance dept and provide workable directive for items, such as Corrosion awareness studies, PMI inspection, thermal imaging & On Stream Inspection activities.
Reviewing of sub contractor bids to establish assurances of correct interpretation of the actual scope to be undertaken. Provide a workable method statements and safety case study for the project such as Shell FPSO Bonga, Nigeria. – Base line survey of entire stainless steel due to material failures from CSCC.
Quantification of structural steel and piping survey in so far as works to do and specification violation leading towards completion packages.
LPG Storage Facilities, Lloyds of London / QATAR Petroleum/Samsung, carry out inspection on LPG tanks which had signs of condensation and coating failure, using thermal imaging camera to establish and record specific temperature per location, review coating application and report findings.

AUG 2004- MAR 2005 GLOBAL PETRO-PROJECT SERV (SAPIEM), SWITZERLAND.
LEAD ENGINEER, CORROSION DEPT.

Assignment: Shell Hazira, On & offshore handling, LNG Storage Terminal, Surat, India.

Provide Supervision and Inspection duties in strict accordance with Shell specification.
Review all Vendors & Sub-contactors method statements and procedure prior to works commencing.
Reviewing Bids and Tenders for Selection of suitable and competent suppliers.
Issuing of site approvals too all Sub-contractors personnel including applicator and crew supervisor/QC.
Monitoring daily activities during the erection and installation equipments and piping, inc field joints. This included material verification, as per IFC drawings and red lining to ensuring that the installation and erection & application, was in line with project requirements.

EMPLOYMENT HISTORY (cont)

JAN 2004 – JULY 2004 SAUDI ARAMCO / WORLEY (PARSON) ARABIA.
SENIOR INSPECTOR OFFSHORE STRUCTURES AND PIPELINES.

Assignment: ABA SAFA offshore Jackets and topside, NPCC yard, UAE.

Managing Inspection department and monitoring of all daily activities and aid in conducting inspection during the installation of Cathodic Protection systems during the construction of 16 platform Jackets and topsides, and pipeline for sub sea installation. Vendor inspection duties such as Sub Sea flow line FBE works, template & valve unit Inc seat testing/leak. Verification of design details within current specification. Top side verification of accommodation and electric module for gas leak testing in line with DNV,
Daily monitoring of pipelines fabrication process inc witnessing of FBE application, testing, Storage, handling prior to loading to barge.
Monitoring of the installation CP Anodes, painting, Insulation & fireproofing activities.

SEPT 2003 – DEC 2003 RIGBLAST ENERGY SERVICES, BAKU, AZERBAIJAN.
SNR COATINGS INSPECTOR.

Assignment: BP/AMEC/TEFKIN Offshore Project.

Carry out daily supervision and inspection of coating and insulation activities. From witnessing of climatic condition, blotter testing and blasting profiles and cleanliness level through to witnessing of coating application such as MIO, Glass flake and chartek 7 to structures.
Also during this assignment I was required to aid in the layout of the Rig blast new state of the art blasting facility, which was under construction, my involvement ranged from general layout detail to training of local staff to supervise the factory.

MARCH 2002 – SEPT 2003 LLOYDS REG INSPECTION LTD, LONDON, ENGLAND.
SNR COATING INSPECTOR/SUPERVISOR.

Assignment: Amec BKW, Saudi Aramco Berri Gas Plant, and Jubail KSA.

By far my most challenging position: - This included 10,000 tons of structural steel and 190,000m2 of pipe work pipeline, 61 pressure vessel both carbon and stainless steel. (Coated & Cryogenic insulation)Monitoring of all aspects corrosion / cathodic protection/ coatings and insulation activities from early works through to completion and commission phase punch lists. This included daily visiting to lay down yards and witnessing of pipeline and random length coatings application. Carrying out random inspecting and verification of actual application in progress and reviewed all paperwork and inspection reports Insulation: witnessing and inspecting the application of foam glass and vapour barriers material. Monitoring of Intumescent fireproofing (UL-1709) & Refractory application.

MAY 2001 – MARCH 2002 LLOYDS REG INSPECTION LTD, LONDON, ENGLAND.
CORROSION/COATING INSPECTOR. (THIRD PARTY VENDOR)

Assignment: AMEC Capital Projects/Belleli (now Trading as Bilfal) Heavy Industry Ltd Jubail, KSA.

My main role was to monitor and witness the fabrication and coating and insulation application of 61-cold insulation pressure vessel, which was being constructed on site. I was also AMEC's focal person for any technical issue relating to the design and construction of the vessel. Provide weekly progress reports and quality audits. Monitoring of installation of insulation to vessel and inspect as per project Specification.

EMPLOYMENT HISTORY (cont)

FEB 2001 – APRIL 2001 MCGREGOR ENERGY LTD, ABERDEEN, SCOTLAND.
COATINGS INSPECTOR.
Assignment: On & offshore. British Gas, Hannibal Plant, Tunisia.
Carry out inspection on Painting, insulation and refractory works during shut down and post shut down activities. Visiting offshore platforms to supervise Insulation application of flare bridge welds for radiation protection.

MARCH 1999 – JAN 2001 RIGBLAST ENERGY SERVICES LTD, ABERDEEN, SCOTLAND.
PAINTER AND THERMAL INSULATOR ENGINEER.
Assignment: BP/Shell/Total/Mobil/Enterprise Oil.
During this period of employment my duties ranged from application to charge hand and supervision of the other depending on workloads.
The main activities, was removal of insulation material, repairing of defective coating and replacement of insulation for maintenance works as per direction of platform

OCT 1998 – JAN 1999 MCGREGOR ENERGY LTD, ABERDEEN, SCOTLAND.
PAINTING AND INSULATION CHARGE HAND.
Assignment: QC Solitaire Pipe LayingBarge.
My role was to supervise the Painting activities plus completion works while the barge was laying pipe

1992 – SEPT 1998 RIGBLAST ENERGY SERVICES LTD, ABERDEEN, SCOTLAND.
THERMAL INSULATOR (TIE)
Assignment: Various North Sea Hook-ups.
During the hook up stages I was engaged in the application of thermal insulation material and sheet metal fabrication as per standard Petro-chemical specification.

1986 – 1992 KITSONS INSULATION CONT, GLASGOW, SCOTLAND.
CRAFT APPRENTICE ENGINEER
Assignment: 4 Year CITB Training.
Year 1-2 Working on various industrial and Petro-chemical facilities throughout the UK, performing craft trade school training for City & Guilds 619. Year 3, as above plus, working in main shop fabrication department. Glasgow Year 4-6 Surveying and Estimating local tenders and project supervision duties.

Referee
Will be provided

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1201 to 1250 of 15312)

Go to Search Parameters...

Brief Description

20 years in Oil/Gas in Eng. ,Procur.and Construction including Piping Design in accordance with international codes, Procurement Technical Services & Construction Supervision. Management of Eng. Staffs in Multinational and International Environments Conversant with ARAMCO and SHELL DEP Specs

Instrument technician - PLC/DCS programmer

Senior Offshore Structural engineer with 13 year of post graduate experience in analysis & design of offshore structures

Strong managerial and technical skills successfully proven in planning, executing and managing business process, projects and Drilling & Warehouse operations, delivering timely results. Analytical, client-oriented, problem solving, leadership and communication abilities complement my professional

20+ years experience as Piping Designer in FEED, EPC, EPCM, Detail Engineering in Oil & Gas, offshore,Petrochemical,and Refinery & Chemical industry.

I am an independent consulting Mining Engineer based in Perth, Western Australia. I specialize in temporary management replacement, mine design, and mine project evaluation in Australia, Asia, and Latin America. No job is too small and all inquiries will be responded to.

Experienced, registered professional petroleum engineer with 20+ years direct petroleum-related experience. Two graduate degrees in Petroleum Engineering (Stanford University). Extensive management experience with senior technical professionals in all related disciplines.

Process economist for complex chemical and metallurgical processes

Consultant in well stimulation, well completion, production operations and reservoir engineering. Designed and supervised: - Hydraulic fracturing and TIF, Western Siberia - Massive hydraulic fracture in very high temperature reservoirs - Matrix acidizing, acid fracturing, scale control

With some 20 years of work experience,my research has focused on fish stock assessment and management. My interests include applied Statistics and ecological modelling to assist in analyses of various aquatic resources. He has a Bachelor in Zoology, and a M.S. and Ph.D in Fisheries.

I put at your disposition 23 years of experience in the laboratory and field activities at PDVSA-Intevep, Research Center and Technological Support for the Oil Industry of Venezuela, with the drilling & completion and materials performance groups for production operations.

- Head of electron microscopic laboratory (mineralogy, asbestos, x-ray-analysis) - Research staff member (electron microscopy, Material science) - Lecturer (petrologic, ore and electron microscopy, mineralogy) - Research assistant (petrologic and ore microscopy) - Exploration geologist

Petroleum Engineer

DSV with over 20 years experience.

Diploma of Associate Engineer (Telecommunication / Electronics Technology), Computer uses Certification in Software Application, Installation and Hardware troubleshooting with maintenance. Pakistan, Certificate of instructions on computer operating systems, Basic training of Radio mechanic

I am a Senior Process Engineer with 27 years of operation and process design experience in the oil and gas industry. I worked for Saudi Aramco for 23 years as a Senior Process Engineer in an NGL Plant, gas plant, & a refinery. I have B.S & M.S. in Chemical Engineering from University of California.

Civil Marine, Dredging & Coastal Engineering. record: 70 projects

30 years experience in Metallurgical Investigations and Concentrator Operations processing base metals.

Road works

Chemical Engineer with experience operations/erection/commissioning of Oil and Gas,Large Chemical Complex

Conceptual design, front end and detailed engineering of process plants including preparing piping layouts , equipment layouts ,plot plan,Preparing and checking PDS 3D/Auotplant models,Isometrics,Pipe support and stress analysis,MTO,BOM,Manpower Management,to complet project within budget and time

Commissioning, Start up Specialist, Operations Supervisor, OJT, Proactive multi-skilled Team Leader with detailed knowledge of process plant/man-management. HND in Chemical Engg; Valid Offshore Pasport Holder.

I have experience with rotating equipment such as turbine, compressors, motorrs, pumps and gearboxes.

12 years of experience in various design, training and project planning activities which involves Static and Dynamic Stress Analysis of different Nuclear, Petrochemical and Pharmaceutical Piping Systems, Selection and Design of Pipe Supports, Piping Layout design, Isometric Drawings, Integrated Pla

Maintenance & Mechanical Commissioning Supervisor

Mechanical engineer, with 15 years experience in mining mobile equipment maintenance

Proect control enginner cost control and senior planner for EPC projects

I have 15 yrs experience in construction supervision of roads and bridges (RCDG), concrete slope prot. works, RCBC and concrete retaining walls. Presently I am working in Saudi Arabia as Civil Engineer handling big highway proj. designed for asphalt pavement.

Having 15 years of experience as as Design Draughtsman / Autocad Engineer in Oil & Gas, Petrochemical & Manufacturing industries.

QA/QC Manager Welding Engineer Offshore and Onshore

Drilling Excelence Manager for BP Trinidad & Tobago. 10 Years experience in BP as DE/SDE/Org. Capability Manager & Drilling Excellence Manager. 9 Years in Service Company with experience as De/project Manager/Proposal Manager & QHSE Manager.

Sr Instrument Engineer with over 15 years experience in the design and specifications of instrumentation for petrochemical plants, and 2 years for offshore platforms

Structural/Geotechnical Engineering jobs such as Pile design, Retaining wall design and project management

Project/Engineering Manager, 24 yrs Experience in Oil & Gas (Indian Oil Corporation Ltd.) for Development of Terminals & Gas Stations. Projects involve conceptualizing, engineering, budgeting, estimation, tendering, procurement, fabrication, installation, testing, pre-commissioning and commissioning

Piping stress analysis, finite element analysis using ANSYS, Mechanical design, etc.

Experienced Country Manager, skilled in change and open to multicultural environment.

Design skills in steel and concrete of petro chem and power plants.

Production Engineer resume

Hands on site experience in infrastructure works (roadworks ) and buildings works with total 19 + years experiences ( supervision and project management)

Maintenance Electrician

I working for Schlumberger Achievement as Crew Chief Wireline Operator. I perform jobs in location. Working in a Team is one of my compliances, most jobs in Cased Hole and Open Hole, and report to Field Engineer

Coatings & Corrosion Engineer "NACE"

I am 44years old and right now I am still working at PT Pec-Tech Indonesia (RGMI Group), current position as “Senior Process Engineer”. Business line of this company is Engineering/EPC As you can see from my enclosed curriculum vitae; I have long and wide experiences (± 19 years) in Operation Pro

Senior Environmental Engineer/Manager, Multimedia, heavy industry, permitting, compliance, ISO14001

Licensed professional engineer with over twenty-seven years of structural design and deliverables production experience for Industrial, Commercial, Residential, Oil and Gas, and Transportation projects

Upstream and mid-stream experience(27 years) plus underground waste water injection

earned master of science at the University of Oklahoma in the subject of rock mechanics. He has been a professor of production, drilling, completion and stimulation for more than 14 years, and he had earned more than 12 years of field experience.

I am experienced Metallurgical Engineer with unique experience in a broad range of metals/gasars/alloys/composites processing, including alloying, casting, melting, heat treatments, microstructure design. Able to work in quality control, research and development facilities.

I am experienced in reservoir simulation and numerical modelling, foamy heavy oil flow, well testing analysis, production forecast, horizontal and multilateral wells, thermal recovery, water flooding, PVT sampling and analysis.

I have a PhD in Logistics Management and over 20 years work experience in shipping, logistics, supply chain management, airfreight, sea freight, container marketing & operations, port development & expansion, ship and air chartering, project cargo handling, freight forwarding, etc.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 [ 25 ] 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Goto Advanced Search...
Keywords: (e.g. mining engineer)		Find results with:

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out