Resume - Experienced workover rig driller looking for international or domestic work as t...

Misco Jobs

Resume #80262

CONTACT INFORMATION:
View contact information...

OBJECTIVE:

Domestic or international work as a Driller on workover rigs

WORK EXPERIENCE:

Precision Well Servicing Grande Prairie and Red Deer, AB
November 2002 to Present – Driller and relief Rig Manager
* Directing and working along with rig crew with little to no supervision
* Receiving and performing instructions given by Rig Manager and Consultant
* Working with third party services, including snubbing, fracing, E-line, slick-line, and toolhands
* Operating rig in a safe manner
* Driving crew to and from rig site
* Rig maintenance
* All aspects involved in completions, workovers, pulling and running rods, running, setting and retrieval of packers and bridge plugs, working and operating power swivels and mud motors
* Swabbing
* Spotting and rigging up and rigging out of rig and supporting equipment
* Working away from home for long periods of time

Drive Well Service and Precision Well Servicing Grande Prairie, AB
December 2000 to November 2002 – Derrickhand
* Relief Driller
* Being trained for Driller position
* Training of green Roughnecks
* Training of Roughnecks being promoted to Derrickhand position
* Pump and tank maintenance
* Pumping and tracking of fluid volumes
* Pulling back and throwing tubing various sizes, 2 3/8, 2 7/8, 3 ½
* Heavy weight tubing drill collars
* Pulling and running of rods
* Rig up and rig out of pump, tank and pump lines
* Working away from home for long periods of time
* Working with tank truck drivers and vac truck drivers

Drive Well Service Grande Prairie, AB
October 2000 to December 2000 – Roughneck
* Rig up and rig out of rig and support equipment
* Operating tongs
* Maintaining equipment
* Keeping track of inventories
* Spinning of rods
* Working away from home for long periods of time

Talbot Construction and Maintenance Winnipeg, MB
May 1997 to October 2000 – Labourer
* Installation of sheet metal siding and roofing
* Carpentry
* Set up and take down of scaffolding
* Working on ladders, scaffolding, and swing stage
* Working with little to no supervision
* Supervising employees on job site
* Working away from home for long periods of time
* Working with other trades

Drive Well Service Grande Prairie, AB
August 1994 to August 1996 – Roughneck and Derrickhand

Norm's Tank Rental Grande Prairie, AB
January 1994 to July 1994 – Labourer

OILFIELD CERTIFICATES:
H2S Alive Well Service Blow Out Prevention Standard First Aid, Level C, CPR
Fall Rescue for Rig Work Fall Protection for Rig Work Confined Space Awareness
LEL Monitor Awareness Special Oilwell/ Boiler Transportation of Dangerous Goods
WHMIS Precision Drilling Observation and Communication Seminar CAODC Driver Certificate
Valid Passport

REFRENCES AVAILABLE UPON REQUEST

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 7901 to 7950 of 15497)

Go to Search Parameters...

Brief Description

Senior PDS and/or PDMS Structural Designer. Experience in all aspects of design; from conception of design (FEED), layout work to detail design in the Oil and Gas (onshore/ offshore), Refinery/Petrochemical plus Power Generation industries for EPC&M companies in Europe, Asia and Australia

IT Manager

I am a civil engineering diploma holder with 8 years exp.in high rise residential and commercial buildings.

Several years of experience in CAD drafting in wood carpentry including 10 months work in Middle East, at present I work as Bulk Handling Design Engineer in a European company, part of my work is to design bulk handling system of cement cargo ship and supply vessels including loaders and unloaders,

Diploma in Electrical and Electronics Engineering ¡V 3 Years

I am interested in continuing within electrical, instrumentation and administration or even any place related because I am flexible to learn, and make myself marketable in the industry and commercial, etc. I have excellent skills and strong sense of environmental and safety issues.

Strong in mechanical,electrical and plumbing.mobile or fixed equipments or engines are my categories where I am efficient as a hard worker, innovative, result oriented

Dual Trade mechanical fitter, steel fabricator, welder with supervisory experience. I have a keen in safety and have been a safety supervisor on jobs before.

Ihave an experiece of more than two year in desiginig of heat exchager and pressure vessel in an oil and gas fied andmy objective is to work with an organisation that can utilize and sharpen my skills in Mechanical design(pv elite software), Thermal design, Process design

I am an highly versatile and enthusiastic individual. Self motivated with a confident, friendly and sociable personality.I'm a supportive team member who also works well on own initiative.I am able to work under pressure and prioritise heavy workloads.

Piping design an stress analysis

December 2008 graduate of Texas A&M University with a degree in Petroleum Engineering. I am seeking full time employment as a Petroleum Engineer in the oil and gas industry. Please find my resume attached to this email, I look forward to speaking wit

Acoustic operator/Search and Rescue Instructor/Sonar operator

Red Seal Millwright, Class 1 Drivers Liscense, Mine Rescue, First Aid Ticket, H2S Alive, Whimis, Confined spaced entry and rescue, Fall protection.

ABILITY TO DRAW AND INTERPRET ENGINEERING DRAWING

Corrosion/ Material/ Metallurgical/ QA/QC Engineer

To contribute to my Organization's success through the use of effective customer,managerial and people skill.To serve reputable Organizations with an undying passion for excellence and creativity.

NVQ level 2 Scaffolder with 8 years experience and offshore experience. Offshore survival and full medical

Advanced skills for professional design in 3D (Autodesk Inventor 2009)

Heavy duty mechanic

Oil and Gas Equipment supply

Mechanical Draughtsman with Diploma in echanical Engg. 5 yrs. Exp.

Computers, home building from foundation up. Media instalations (cable industry work)

Experienced workover rig driller looking for international or domestic work as the western Canadain oilfield has slowed down. I am hard working, a quick learner and very adapable to new surroundings. As you can see from my resume, I am a dedicated and loyal employee as well.

Skills include Lease Negotiations, farm ins and farm outs, JOAs, Oklahoma Corporation Commision forms and requirements, Pooling Orders, Division of Interests, Due Diligence, Title Curative, Ownership Reports.

Qualifications & Skills: Title Runsheets, Lease Take Off's, Ownership Rpts., Lease Acquistions and Due Diligence

structural drafter or designer, preferably on the offshore indestry.

Bulldozer Operator, performed pre and post operation of the bulldozer

I am looking for a career within a company that promotes from within and encourages continuous learning as well as where my enthusiasm, drive and knowledge will be a valuable asset.

Skills- Creative and Innovative, Good Communicative Skills. Ability to Work under Pressure. Ability To Mobilize And Supervise People. Strong in Team spirit. Microsoft Office software and the Internet, , Qualificatiions- Higher National Diploma (HND) in Insurance (Lower credit), 2007.

Instrument design wihin oil and gas industry. Using Intools and CAD packages.

I have been working for 6 years on inland drilling rigs. I worked my way up to driller last year & have 4 years exp. as a derrickman.

B.Sc Honours Mining Engineering

Senior Cased Hole Wireline Engineer

Conducting baseline Survey, Conducting technical and Enviro legal study,Modeling of Air impacts using ISCST 3 and CALINE 4 for evaluating the proposed change in concentration of various pollutants, ,Conducting Public hearing Preparation of EMP (Environment Management Plan), M.Sc environemnt science,

Welding Inspector/Trainer/Supervisor

Deepwater Completion engineer

Master Electrician

ERZ Controller (Underground Deputy)

20+ years exp and Involved in the commissioning of Copper/Gold Mine, Barrick Buzwagi

Over 25 years experience in the pipeline construction industry. Positions held range from heavy equipment operator, superintendent, foreman, & utility inspector. Qualifications listed with ISNetworld, OSHA Safety certifications

11 years of experience in Project Cost Control on Saudi Aramco Projects in Saudi Arabia. Presently working for Saudi Aramco thru secondment.

+16 yrs of experience in EPC/PMC, TPI Quality control & in Construction Companies. Having well experiences for various stages wise Inspections involving Pressure Vessels, Storage Tanks, A/G & U/G Piping & Structural Steel Works. (ONSHORE & OFFSHORE).

Comprehensive drilling experience of 11+ years in various locations worlwide with E&P Operators. Four years experience as Drilling Supervisor offshore Thailand and Gulf of Mexico. Seven years Drilling Engineering experience onshore and offshore, includes day to day rig operations management.

BSc Hohours Degree in Mining Engineering, Now working as Planning Manager for an Open Pit operation. Very good in Planning , using Surpac Mining software.

Production Technology, Completion Engineering, Well Testing, Nodal Analysis, Flow Modelling & Production Optimization

My experience in construction 6 years with contactor company.

Competent Mine Geologist, Key skills - Analytical, underground mapping, core logging, Resource estimation using Datamine as well as leadership skills

20 years Materials Controller / Coordinator

sr;mechanical engineer /project engineer/construction engineer/manager/engineer

First Prev 151 152 153 154 155 156 157 158 [ 159 ] 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 Next Last

Seach Parameters


Goto Advanced Search...
Keywords: (e.g. mining engineer)		Find results with:

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out