Resume - Piping designer /supervisor , PDS designer

Misco Jobs

Resume #80530

CONTACT INFORMATION:
View contact information...

Date of Birth: 05-01-1979
Place of Birth: Hà Tĩnh
Sex: Male
Marital Status: Single
Health Condition: Good

QUALIFICATION

Name of University: Ha Noi University of Technology
Time: 1997~2002
Major: Mechanical Engineering /Automobile Engineer
Other Training Courses Attended: IT training (on the job training)
Project management and tender
English skills: Fluently
Computer Skills: * PDS, Smartplant 3D, Microstation, AutoCAD, SmartSketch, SmartPlant P&ID, SmartPlant Preview.
* Microsoft Office, Network system
Country of Work Experience: Viet Nam, Philippines, Angola

WORK EXPERIENCE

Name of Current Employer FRIEDLANDER
Company Address: Rua Comandante Kima Kyenda No.96 - Boavista - Luanda – Angola
Date Employed: Feb 27, 2008 Position Hired Into: Mechanical Piping Engineer
Current Position: Piping Engineer
Key Responsibilities In Current Position:
* Responsible to resolve any problem at field such as pipe support design, pipe isometric, arrangement…to match with operating condition at site
* Conceptual layout and Isometric drawings for bitumen plant.
* Materials take off for Palanca project.
* Site survey for modification of existing unit/items
* Support shop fabrication team to complete pipe Pre-fabrication on workshop
* Monitor the installation of piping system, structures, equipment at site. Responsible to manage/control foremen/workers to complete the installation to match with design drawings.

Name of Employer TECHNIP CONSORTIUM
Company Address: 01 An Duong Vuong Str., Quang Ngai City, Vietnam
Date Employed: May 2, 2007 Position Hired Into: Piping Supervisor
Position: Piping Supervisor
* Check bill of materials for underground piping system.
* Monitor the installation and hydro test of piping system.
* Verify Sub-Contractor daily reports
* Report to direct piping Superintendent the site works.
Scope of control:
* Light cycle oils hydrotreater Unit
* Sulphur Recovery Unit
* Amine regeneration Unit
* Sour water treater Unit
* Spent Caustic Neutralization Unit
Key Responsibilities:
Supervise Sub-Contract Companies on the fabrication and installation of Piping / Pipelines above and underground of Dung Quat refinery:
* Check all iso drawings of underground piping system (OWS, FW, PW)
* Monitor and expedite of availabilities of materials on daily and weekly basis.
* Ensure daily efficient running of the Fabrication Shop
* Prepare, monitor and control of schedule/ progress
* Coordinate inspection activities and insurance of inspection application to QC.
* Request field engineer for issuing of change in the site works. Monitor and control of changes in the site works.

Name of Employer CREDENT ASIA TECHNOLOGY CO., LTD
Company Address: Room 704, 2 Ngo Quyen St, Hoan Kiem, Hanoi
Date Employed: Sep 19, 2005 Position Hired Into: Application Engineer from Sep 19, 2005 to May 02, 2007
Key Responsibilities:
* Provide technical support and project consultancy in the area of engineering software of Plant Design System.
* Implement training and consulting service of Intergraph software solution (PDS, SmartPlant 3D, SmartPlant P&ID, Microstation, SmartSketch, SmartPlant Review) for EPC and O/O Company in Vietnam.
* Software demonstration for marketing activities
Project Involved:
* Engineering software trainer /consultant: Dung Quat Refinery Project, Vietnam
Implementation/ training and on-site consulting services for engineering software system (PDS, PID, SmartSketch, SP explorer, Microstation, SmartPlant Preview)
Installing, configuring and maintenance of CAD system
* Engineering software trainer/consultant: VSP - NIPI
Training and consulting on Intergraph design solution for offshore project.
Supporting VSP to create as-built model / drawings by using 3D software.
* Engineering software trainer: EVN–IE (Electricity of Vietnam–Institute of Energy)
Training on Intergraph design solution for coal thermal plant
Name of Employer: JGC PHILIPPINES CO., LTD
Company Address: Madrigal Business Park, Ayala Alabang, Muntinlupa City, Philippines
Date Employed April 12, 2004 Position Hired Into: Piping Designer from April 12, 2004 to April 12, 2005
Key Responsibilities:
* Piperack layout, piping layout around equipments (pumps, heat exchangers, etc.)
* Equipments, structures and piping modeling by PDS software
* Isometric drawings sketching by AutoCad and Microstation
* Isometric drawings checking
* Materials take-off

Project Involved: Piping/ PDS designer: JCP (Jubail Chevron Phillips) Project

Name of Employer: VEDAN VIETNAM CO., LTD
Company Address: Phuoc Thai Ward, Long Thanh District, Dong Nai Province, Vietnam.
Date Employed: Jan, 2003 Position Hired Into: Mechanical Engineer from Jan, 2003 to Dec, 2003
Key Responsibilities:
* Inspection / maintenance of pipelines, piping, valves, pumps and rotating equipments
* Installation of pipelines and equipments for mill expansion and revamping.
* Implementation of hydro-test for piping system
* Measurement of tank thickness periodically for corrosion calculation

Highlight of qualifications:
Language skills: Fluently in spoken and written English
Functional experiences:
- Piping supervisor
- Field engineer
- Piping designer
-Operation engineer
-Design software instructor
Computer skills:
- Excellent in Microsoft Office, Internet, e-mailing
- Excellent in Auto CAD, Microstation, PDS (Plant Design System) SmartPlant P&ID
Objective abilities:
- Hard-working to look for promotion
- Responsibility and Co-operation
- Fast adaptability

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 5251 to 5300 of 15483)

Go to Search Parameters...

Brief Description

I have worked as development geologist, geophysicist and production geologist. I have worked with seismic data, well log correlation and interpretation; creating and interpreting pressure, GOR, rock properties maps; well interaction analysis.

IAM HAVING THE VERY GOOG ANALYTICAL SKILLS TO SOLVE THE PROBLEM

I am a supervisor of 6. fork lift; quality control. vendor contact, scanner; case packer operator, harper operator; shipping and receiving

Reliability Engineer

nior Software Engineer, Ascendum Solutions Pvt Ltd, Bangalore, India Dec 2007 - Present * Member of the ATG development team in the educational software development

11 years of NDT experience in the Middle East

Project Controls - Cost/planner scheduler - Desire Rotation Schedule - Currently at Alpine, North Slope Alaska. Willing to learn additional Skills.

Instrument Design Engineer; Instrument Site Supervisor c. PMT Instrument Field Engineer

Sizing process systems, Conceptual Design on projects : carrying out engineering studies at initiation, feasibility studies & concept selection,Process simulation & datasheet preparation ,Knowledge of Design Reviews and HAZOP studies,Preparation of PFD’s and P & ID’s,(B.Tech in Chemical Engineering)

Internship experienced geologist seeking full time position

CSWIP 3.1 certificate # 25917/2 ,TWI, U.K

Piping engineer

I have nearly 5.5 years experience in piping material engineering pertaining to petrochemical projects with renowned EPC contractors. During this time I have been responsible for various piping material related activities like piping class preparation, TBE, vendor drawing review.

Project Controls Analyst/ Scheduler with EVMS experience

Project Engineer

qa/qc inspector (welding or piping inspector)

wireline specialist and downhole gauges engineer

Chartered electrical engineer experienced in Instruemntation filed. Trained in QMS ISO Lead auditor course.

Mech Engineer, 10 years EPC experience in packages for oil & gas; gas dehydration, stabilization, water, effluent, pumps, utility equipment

Safety Officer with more than eight years of experience and presently working in Saudi Arabia with Saudi ARAMCO projects.

Excellent Engineer, with great oil & gas field experience. good management skills and communication. big experience of down stream and upstream.

Graduate Quantity Surveyor/Estimator, 10 Years Experience with B.Sc., AAIQS, ICIOB and MA Cost E.

Facility Engineer for oil and gas

Emergency response advisor and fire training instructor, a multi diciplined fire fighter with 25 years of actual expericnce.

Sheet Metal /Insulation Supervisor

Experienced EHS professional seeking leadership position in the management of environmental risk and occupational safety at the corporate or facility level.

Graduate in Electrical Engineering, with 14 year experience, of which 6 years in Refinery/Gas plant. Familiar with all maintenance & construction activities.

Very good exposure to conceptualisation, business developement, sales, erection, installation, commissioning and O&M of Lean burn Gasengines/ Diesel engines

Environmental Coordinator, experienced in: annual reporting, auditing, Title V permiting, SWPPP, SPCC, environmental program development, environmental training development, and project managment.

Self motivated, work under pressure, persistent, ambitious, capable of working in a team and lead.

Senior PDS Designer

Master in Chemical Engineering, 3 year experience as mud engineer

Highly competent, result oriented Drilling Engineer with three years of extensive experience in drilling optimization of horizontal, directional and extended reach wells. Demonstrated skill as a successful team leader and team player. Masters in Petroleum Engineering from University of Oklahoma.

I have about 12 years of Industry and ERP experience with 5+ years of extensive SAP FI/CO/PS. My experience in FI/CO and PS encompasses 9 projects. 3 of these projects were full life cycle implementations which went from Blue Printing to Realization and Go Live.

Canadian Sr. Control Systems Engineer (process control). PLC/DCS programming. I &C Design.

Exploration Geophysicist

SAP BW/BI Techno-Functional COnsultant

Mechanical Engineer - Static Equipment (Design & Detailed Engineering of Pressure Vessels, Columns, Column Internals, Heat Exchangers & Storage Tanks based on various Design Codes & Standards.)

Piping designer /supervisor , PDS designer

Instrument and Control Engineer

More than 11.10 (8.10 years in Saudi Arabia, 5 months in Qatar, 1.7 years in Abu Dhabi UAE & 1 year in India) years of extensive experience in Quality Assurance and Quality Control in Oil, Gas & Petrochemical Projects, Acetic Acid Project, Ammonia Urea Expansion Project and Power Plants involving En

Infor, Datastream, Maximo

DIPLOMA IN CIVIL ENGINEERING, CURRENT POSITION- LEAD STRUCTURAL CAD TECHNICIAN AND COORDINATER, SKILLS- AUTOCAD, REVIT STRUCTURE, MS OFFICE,CADS RC.

Executive Management level experience and expertise

B Tech Degree in Mechanical engineering with 6+ years experience as a Production Planning and Material engineer in manufacturing of Oilfield equipments, Pressure Boilers, Process plants.

Searching for a challenging job in the field of PetroChemical engineering. Expert in MS Office and other computer operations.

6 years of experience in oil reservoir management. Development & monitoring low quality multilayered reservoirs. Preparing development plan, production forecast & the budget. DST, hydraulic fracture & acidizing operations supervision. Water flooding designing, operations & surveillance.

Instrument Design engineer having 6+ yrs of experience

Mining engineer

POST GRADUATE - MTECH MECHANICAL (FROM NIT NAGPUR-INDIA),STORAGE TANK

First Prev 101 102 103 104 105 [ 106 ] 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 Next Last

Seach Parameters


Goto Advanced Search...
Keywords: (e.g. mining engineer)		Find results with:

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out