Misco Jobs  |  Go to Job Seeker's Center »»   |  
 
«« previous resume Resume #81 next resume »»
CONTACT INFORMATION:
View contact information...

EQUIPMENT OPERATED: JACKLEGS, JUMBOS, TRACK MUCKERS - J12’S + J21’S, 911’S, 912’S, 913’S, 915’S, ST5’S, HAUL TRUCKS, SINKING HAMMERS, 966 - 988 CAT FRONT END LOADER, AND CRAUTERMAN.

EMPLOYMENT RECORD

Geo Grout, Inc.: 04-29-00 / 06/16/00. Glenn, CA.
Driller and grout pump operator. Drilled holes for grouting levee on Sacramento River. $22.86 per hour. Supervisor: Hector Quiles

Frontier-Traylor Bros.: 10-21-96 / 11-14-97. Portland, OR.
Safety Technician on the Tri-Met light rail system.
Worked shift work doing on site safety in tunnels: pertaining to pouring
Concrete; grouting; installing rebar, hi-rail gear, equipment relating to track
and safety specifications; yard safety insuring that all hands operating
equipment are task trained before they are allowed to operate equipment.

OSHA requirements on site, both yard and tunnels; personnel to use PPE
at all times; safety belts and climbing harnesses; ventilation requirements for tunnel; hi-rail safety chocks (wheel). Markers for rail; wearing of safety
vest (orange with bright tape) while in tunnel and around yard for visibility;
safety glasses.

Guy F. Atkisson: 09-93 / 10-93. Buck’s Lake, CA.
Dave Brewton (Walker). PG&E power station. $22.75 per hour as a miner. Worked the bullgang cleaning up at the end of the job. Rehired from August as they let too many hands go and then had more work to do.

Independent Mining: 08-93 / 09-93. (Centennial Development, Riverton, UT)
    Elko, NV. Decline. $16.00 per hour and $40.00 per day subsistence.
Ran motors, jackleg, drilled and shot, hung utilities, general bullgang
duties.

Guy F. Atkisson: 07-93 / 08-93. Buck’s Lake, CA.
Dave Brewton (Walker). PG&E power station. $22.75 per hour. Miner
worked the bullgang until laid off.

Morrison-Knudsen: 08-26-91 / 02-28-92. Keddie, CA.
    Lock Spencer (Superintendent) and Matt Needles (Project Manager)
    $17.35 per hour. Miner – set steel, lagged steel sets, poured concrete,
grouted, shot-creted. Ground support on old railroad tunnel that had
burned and caved in. Equipment maintenance and prepare deck for next
phase.

National Projects: 02-23-91 / 04-23-91. Jacumba, CA.
    Lock Spencer (Superintendent) and Matt Needles (Project Manager).
$16.50 per hour. Miner – ground support on old railroad tunnel that had
burned and caved in. Stood steel, poured concrete, shot-creted, scaled, drove pilings, and grouted.

National Projects: 09-23-90 / 02-10-91. Christianburg, VA.
    Lock Spencer (Superintendent) $17.50 per hour. I was the Shifter.
Drilled sides to support ribs before cutting top out of tunnel. Grouted ribs,
hung wire for overhead support, shot-creted both portals, back filled with
gravel behind steel sets, and stood steel.

Morrison-Knudsen: 02-90 / 05-90. Martinez, CA.
    Lock Spencer (Superintendent) $16.75 per hour. Miner – drilled overhead
In tunnel for support after we had cut top out of tunnel.

Campbell Construction: 11-01-89 / 11-28-89. Redding, CA, Mercy Hospital.
    Shavon (Superintendent) $20.85 per hour. Miner – used 35 pound
spaders to bell out footings for parking garage.

Shank-Ohbayashi: 03-89 / 09-89. Los Angeles, CA.
    John Shulef (Superintendent) Troy Mongess (Shifter). $17.47 per hour.
    Bullgang – used cutting torch to cut shield out of heading, electric welder
Gun to seal plastic liner to seal out gas and water from tunnel, lay rail, run diesel motor running supplies to work area, roof bolting in areas where needed, cut cross-cut passes for electric station, set forms (both top and bottom of invert), changed out California rail at station and re-installed on other side. (Two tunnels running side-by-side). Remove and install concrete segments in bottom of invert, tied rebar.

Frontier-Kemper: (812) 426-2741 (home office) 09-21-88 / 03-07-89.
    Dave Gibson (Shifter) Tom Lynn (Superintendent) WIPP Site, Carlsbad,
NM. $15.44 per hour. Miner – used slip forms (self-climbing forms on
rods), jackleg, hung wire, liner plate, utilities (6” and 3” lines), rock bolted.

Dravo: (412) 566-6157 (home office) 05-02-85 / 09-17-88. WIPP Site,
Carlsbad, NM. Bud Lucas (Project Manager) $14.27 per hour. Miner –
running Jackleg for roof support, Gettman, LHD, trucks, hanging utilities,
grademan on road header, grading roads, assisting probe hole drillers,
training on road planer and roof bolter.

Ohbayashi-Gumi: (415) 346-6861 (home office) WIPP Site, Carlsbad, NM.
    Dale Blevins (Project Manager), Tom Combs (Superintendent), and
    Lock Spencer (Walker). $14.22 per hour. Miner – grademan on road
header, 912 and 915 loaders, truck driver, bulkheads, utilities (air, water,
and fan lines), jackleg operator for roof support.
Odessa College: (915) 358-4361 01-25-82 / 09-93. Odessa, TX.
Tom Reynolds and Verlon Horn were the immediate supervisors. $1,054.00 per month. Maintenance – electrical, plumbing, structural repairs, and boiler maintenance.

Frontier-Kemper: (812) 426-2741 (home office). 11-05-80 / 03-31-81. Douglas,
WY. Zane Painter (Superintendent) and Don Painter (Walker). $11.00 per hour plus bonus. Shaft miner – drilling with air augers, jackleg, pouring concrete, hanging steel and wooden guides, cutting stations, and
slushing.

Gilbert Corp.: 10-04-80 / 11-03-80. Rifle, CO.
    Shaft miner. $10.00 per hour plus bonus.

Centennial Development: 07-09-79 / 10-03-80. Red River, NM.
Lock Spencer (Walker). $12.30 per hour plus bonus. Leadman – shaft miner. Drilled with sinking hammers, jackleg, hanging steel, cutting stations, driving drifts.

Kerr McGee: 03-16-78 / 07-06-79. Church Rock, NM.
    Don Eroh (Mine Foreman), John Rios ( Walker), and Wiley Brooks,
    (Superintendent). $11.45 per hour plus bonus. Shaft miner – drilling with
sinking hammers, jacklegs, cutting station, changed out pumps, hung steel and wooden guides.

Park City Ventures: (801) 649-8107 12-77 / 02-78. Park City, UT.
    George Cado (Mine Foreman). Ontario Mine. $8.45 per hour plus bonus.
    Miner – worked opening new areas. Worked in stope, drove drifts, ran
electric slusher, jackleg, j12, j21, muckers, utilities, rock bolted. Mine closed 02-78.

Mid-Continent Coal and Coke: (303) 963-2581. 11-77 / 12-77. Redstone, CO..
    Miner – set steel, laid track, roof bolted, worked tailpiece.

Granite-Ball-Groves: 08-77 / 10-77. Dinkey Creek, Wishon Village, CA.
Leonard Jacobson (Walker). $12.10 per hour. Miner – set steel and drove tunnel.

Peter Kiewitt: (801) 882-1360. 07-77 / 07-77. Carrfork Canyon, Tooele, UT..
    Erwin Sass (Superintendent). $11.00 per hour. Miner – worked in station,
    drilled with jackleg putting up mats.

Anaconda: (801) 882-1431. 09-76 / 07-77. Carrfork Canyon, Tooele, UT..
    Fred Smith (Superintendent). $11.00 per hour. Miner – drilled, sinking
    Hammers, jumbo, hung utilities and slick lines.

R. H. Gunn: 07-76 / 09-76. Rock Springs, WY.
    Don Eroh (Superintendent) and David Tatom (Walker). $9.75 per hour.
    Miner – laid track, reclaiming stopes, rock bolted ribs and roof, mucked
    ran muck cars, LHD.

The Oaks at Lake Oroville: 11-73 / 12-75. Oroville, CA.
Andy Anderson (Leadman). $3.75 per hour. Mobile home service and set up.

Oro Dam Motors: 11-73 / 11-73. Oroville, CA.
    Rex McFerrin (Supervisor). $1.85 per hour. Parts salesman.

United States Marine Corps: 09-14-69 / 09-14-73.
    Sergeant. Ordnance detail, artillery, and security at weapons station.
    

View contact information...
«« previous resume next resume »»
Search Results (Resumes 8451 to 8500 of 15341)Go to Search Parameters...
Brief Description
Petroleum Engineer with MBA in Finance (University of Houston). Willing to be relocated to Colombia (South America). Native Spanish Speaker.
• Management Experience and extensive knowledge of the Latin American business environment. • 5 Years Sales & Marketing Experience in South America for Mineral and Oil Exploration surveys for Aerodat Inc., (1995-97), Scintrex Ltd. (1998-99) and Fugro (2000).
x
I am looking for a job in the petroleum industry. I have a B.S. degree in petroleum engineering. I have over 11 years of experience and training related to petroleum engineering. Most of my experience was as a mudlogger. I am very interested in an office position relating to formation evaluation.
Objective to work as shore base support for drilling operations on land/offshore drillling units.
Looking for Field Engineering position.
My first 5 years of experience covers TURN KEY Project Management / Estimation / Execution-Supervision / Installation, Water Trials, Commissioning, Maintenance, Trouble Shooting, etc. & last 7 years in Piping Design & Eng.
Details of career brief version
13MONTHS - SAFETY 7 YEARS - SHAFT 5 YEARS - DRIFTS 6 MONTHS - STOPES
I have worked on all sizes of rigs since 1983 and have gained a lot of down-hole experience in directional, horizontal and under-balance wells.
Bachelor Degree in Metallurgical and Materials Engineer in Brazil. I have 2 years experience working with quality inspection in a maintenance Company for Oil/Gas Industry, also 4 years of experience in laboratory on materials testing and characterization.
25 years experience in Planning/Project/Detailed Engineering of Oil and Gas Plants, Petroleum Refineries and Petrochemical Plants
CFD (Computational Fluid Dynamics), Multiphase/Multi-component flows, Fluid Flows, FSI (Fluid Structure Interaction), ASI (Arbitrary Sliding Interfaces), Heat Transfer, Thermal engineering, Design/development, Combustion, Chemical/Reaction Kinetics and Chemical simulation, PhD, Mechanial Engineering
Total 6½ of years experience in the field of power plant and GOC in various projects. Preparation of GA and preliminary piping layout with Design principles, creation and review of P&ID’s, Review of vendor information, review of contracts with respect to system description, highly proficient using I
PROJECT SKILLS- A project on "Soil quality analysis of Santiniketan, West Bengal" Hands on experience about testing of Air pollution and soil analysis at TATA IRON SPONGE, BIRLA TYRES, and also in PHILLIPS CARBON-BLACK LTD.
Automation Engineer, I have worked in different company for electronic devices and actually in Oil and Gas field us an engineer automation for DCS and Safety syetems, for more details Plaise see my CV here.
Structural design engineer
CCNA, BSCI, Diploma in cyber law
To seek a challenging position of strategic importance, by making contributions to the organization, by best of my abilities and developing my own skills during interaction. My Motto in life is "Problems are opportunities and never accept defeat in life".
I have first aid & WHIMIS certificates, as well as CWB tickets in SMAW 1GF, 2GF and flux core 1GF.
B.Sc Computer Sc,MBCS,MCPRN,MBA(In View), Oracle Database Admin, Microsoft Office 2003 & 2007 Suite, Unix, User, System ad Application Support, Data-Center Administration
Favourite Subjects: Manufacturing processes and Strength of Materials, Ansys, Autu CAD, Basics of C
Entry level
lab chemist - Analysing naptha, fuel oil , lube oil , different water samples (all parameters )
Well Testing Mobile unit Supervisor
Metallurgy and Materials Engineering, Corrosion, Powder Metallurgy, Foundry Metal casting, Composite Materials.
Duties included design and drafting; instrument drawings and documentation such as instrument plans, installation details, creating databases and maintaining an instrument index, and numerous on-site surveys and field work for modification project.
Instrumentation Engg done the project in Hikal (Agro-Chemical company)
I am a young innovative technichian seeking a full-time position with your company.
Maintenace Electrical Foreman
Project Management / Construction Management / EPC / EPCM / PMC
Entry Level Petrol. Engineer
Background in Geology, highly motivated, great work ethic, has great desire to learn.
loaded chemical into varies transports for georgia gulf.
Fresh graduate of Petroleum , i did work with BP Pakistan as internee and also have command on Prosper software please give me a single chance so in this way i can show my skills and talent .
Construction Administration/Project Controls
I am looking job in instrumentation field as instrument SUPERVISOR/INSPECTOR/SR.TECH
A position in which I can effectively use my technical, analytical and creative skills environmental management to improve a company’s environmental operations.
Paramedic/Offshore medic with 19 years experience in Oil, Gas & Renewable Energy industries
Contracts Engineer
seismic interpreter with a strong background in petroleum and structural geology, gained through working on a wide range of fields in different structural settings in the Syrian Euphrates Graben area. A skilled user of the Geoframe and OpenWorks software suite. Completed seismic interpretation
I am a Mechanical Engineer having Post graduation diploma in power plant ,working since Nov'02 in the field of power plant execution
5+ years production and design experience in refinery, PDS, PROCAD, Microstation, AUTOCAD,LDT
Process Engineer
I am an adaptable, enthusiastic and reliable person with experience on a large variety of CAT products, used to working under pressure, meeting deadlines, organizing and communicating.
My skills include the performing maintenance work and repairs on transmitters: SW, FM and AM. Maintenance work on Exchange Equipment: CDMA, trunk, lines. CCNA IN VIEW.
I have 10 years of underground operations experience which includes. Haul truck, mucker, jackleg, bolters and jumbos.
Ability to work as a team with little or no supervision. I read polymer and textile Engineering.
Abity to work with little supervision,counseling ,Bsc Industrial chemistry
Excellent communication skills -english:oral and written.Leadership skills :As a leader of the project team assisted the team in solving the problems that arose.Computer Proficiency:Ms Word,Excel,Powerpoint.Software:Intouch(SCADA).PrimaveraP3
First   Prev   151   152   153   154   155   156   157   158   159   160   161   162   163   164   165   166   167   168   169   [ 170 ]   171   172   173   174   175   176   177   178   179   180   181   182   183   184   185   186   187   188   189   190   191   192   193   194   195   196   197   198   199   200   Next   Last
Seach Parameters

Goto Advanced Search...
Keywords: (e.g. mining engineer)Find results with:
Frequently Asked Questions
What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...
Employer's Center


» Employers Home
» Feedback
» Help

» Post Jobs
» Edit/Delete Jobs
» Search Resumes
» Resumes By Email

» My Account
» Log In

» Log Out
 
©1999-2009 Misco Jobs. All rights reserved.  Contact: support@miscojobs.com