Resume - Relatively young well test engineer/testing supervisor with 10 years hands-on e...

Misco Jobs

Resume #81024

CONTACT INFORMATION:
View contact information...

PROFESSIONAL EXPERIENCE - SUMMARY
April 2007 – June 2008 Well Test Engineer for APICO LLC(Thailand), Nippon Oil(Malaysia), Jubilant Energy (India), Talisman Energy (Malaysia) and Gaz De France (Egypt): Prepare Test programs for Full package Welltests onshore and offshore. Pre-job preparations. Field Supervision offshore and onshore.
2005-Mar 2007: General Field Specialist, Schlumberger Asia Services (India)
DST & TCP specialist. HPHT and underbalance DST. Run Subsea - Sentree3 / 7 (with deepwater control system).
1998-2005: General Field Specialist / Test Supervisor, Schlumberger Geophysics Nusantara, Indonesia
Start as DST/TCP specialist and later becomes Test Supervisor for full package well test

WORK EXPERIENCE - DETAILS

May – June 2008: Well Test Supervisor, Gaz De France - Egypt
Full package Testing on a gas well, jack up Rig. Prepare Test program. Pre-job preparations and inspection of equipment. Manage changes to suit equipment limitations. Field Supervision offshore (alone).
Responsible for all Testing operations offshore, being main contact point for all operations. 30MMSCFD discovery well on a jack-up rig.
April 2008: Well Test Engineer, Talisman Energy - Malaysia
Pre-job Preparation and planning for Exploration well offshore Malaysia. Prepare Basis for Design for Testing. Prepare Well Testing Program and organise plan with service companies. Cost & time estimates. Equipment inspection and certification. Pressure and function tests of surface and downhole equipment. Coordinate test requirement and welltest planning between Reservoir and service companies.
December 2007 – January 2008: Well Test Engineer, Jubilant Energy- India
Day and night Well Test Engineer, onshore Gujarat, India. Responsible for all Testing operations on rig. 2 DST exploration well. Fullpackage well test with a lot of slickline work. 3 DSTs all done with minimum preparation (equipment and time), with continuous changes of program to adjust to equipment and well conditions.
June 2007- July 2007:Well Test Engineer, Nippon Oil, Miri Malaysia
Night Well Test Engineer offshore on SEDCO 601. 2 DST full package welltest. Gas well. Semi Submersible with 250m water depth. Subsea equipment with Coil Tubing lifting frame (difficult set up) and retrievable packer. Both DST successful with gas and oil discovery.
May 2007- April 2007:Well Test Engineer, APICO LLC Thailand
Initial Preparation of Well Test program. Make presentation to Management which includes decision tree and costing for each different Testing scenario. Inspect equipment and suggest changes in equipment as to accommodate a high-rate gas well.
May 2006- May 2007: Subsea Specialist, Reliance and ONGC
DW Frontier/ Transocean Actinia/ Discoverer Seven Seas. Up to 1200m water depth with full electric subsea equipment. Drillship and Semisubs. Work as Team Leader and operator. Prepare and repair all equipment onshore and offshore. Troubleshooting for problems offshore. Latching and unlatching.
Feb 2006–Apr 2006: Subsea Specialist, ONGC
Run first Sentree7 on DST in India on ONGC's Sagar Bhushan Drillship. Run DST on Large Bore Subsea equipment, the first done in India. Done on an old drillship- once considered impossible.
Jun 2005-Dec 2005: DST-TCP Specialist, ONGC
Various Rigs, Bombay High. Run DST and TCP on offshore and onshore rigs – on an exploration or a production wells.
May 2005-Jun 2005: DST Supervisor, GSPC
First underbalance HPHT Welltest in India on a jack-up Rig (Perro Negro / GSPC) - offshore Kakinada, India. 5200m well depth, 9000psi surface pressure, 420F BHT. Involved in preparation and execution of work offshore. Various problems encountered and lots of troubleshooting.
Jun 2003–Mar 2005: DST-TCP Subsea Specialist / Test Supervisor, Devon Pertamina, YPF Repsol, PetroChina
Run DST & TCP jobs. Also work as Test Supervisor for full package well tests, various clients in Indonesia – National and International clients.
May 2002-Dec 2002: DST Specialist, Pertamina & MEDCO
Run DST for full package welltest in various rigs and clients in Indonesia. Mostly exploration wells, both oil and gas with multiple DSTs per well. Permanent and Retrievable packer. TCP on a production string.
Nov 2001–Dec 2001: DST and Subsea Specialist, Inpex
Run DST and help out TCP/Subsea for deepwater testing on a drillship.
Apr 1999-Dec 2003: DST Specialist, Santa Fe ER
Run many DSTs for Santa Fe Energy Resources in Jabung, Jambi Indonesia. Almost all was an exploration well with unpredictable well behavior. Hard work and long hours. Help out Surface Testing.
Mar 1999-Apr 1999: DST Specialist, YPF Maxus
Run DST/TCP shoot and pull offshore Java Sea, mainly for production/development wells.

TRAINING
TBOSIET (Sea Survival, HUET, Fire Fighting, First Aid), May 2008 (3 years validity)
Sentree 7 Subsea training, Aberdeen March 2007
IWCF, Aberdeen February 2007
SUBSEA training, March 2005
TCP Training, June 2003
DST Training, March 1999
Helicopter Underwater Escape Training (HUET), April 2005
Offshore survival training (OST), April 2005

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 6651 to 6700 of 15498)

Go to Search Parameters...

Brief Description

BE MECHANICAL ENGINEERING,ME THERMAL ENGINEERING.

9 years Experience in Oil and Gas offshore production process platforms as Production operator, Plant Operator. Worked in IRAN Petropars Gas development Project phase 6,7&8 as Field Operator through the employer DAELIM Ind. Co. South Korea, Well experience in Commissioning and Plant start-up also.

i am a qualified mine surveyor and a civil engineer currently with Anglo platinum.

I am electrical engineer and doing job in CCIC qatargas project since 2 years.i am looking for the new job in oil and gas industry

Recycle Hydrogen System,Recycle Gas Scrubbing,H2S Handling ,Amine Treating,Reactor Effluent Water Wash,Vapor/ Liquid Separation,Hydrogen Purification,Stripper,Off Gas Absorber ,NHT,PLATFORMING,CCR

To work in a motivating and demanding position, which will help me to grow in the field of knowledge, improvise skills and add value to the system and grow along with the organization.

proficient in AUTOCAD, MS Project, MS Office package, SAP & primevera.

Highly motivated mining engineer graduate, with internship experience at Kompania Weglowa, largest coal producer in Europe. Interested in working as open pit and underground mining engineer, developing technical knowledge skills in adult and pursuing a career in mining industry.

Preparation of Data book files to conform to clients procedures and guidelines, Organize information from internal sources including client, suppliers and in kind resources, Generating and maintaining the project master punch list.

Offshore Drilling Maintenance Engineer

Good work ethic, current job title is foreman. Can read prints, run/route tray, terminate, build panels, troubleshoot, some experience bending tubing etc. Knowledgeable in power, automation, & pneumatics along with a good understanding of both drilling and production operations.

3 years Diploma (mechanical engineer) &12 years work exp- oil & gas area for mechanical supervisor.

PIPING ENGINEER

Perform canister gas content analysis and residual gas experiment on selected core sample, data acquisition and data entry to determine lost gas value.

Well service specialist

A full time position to appreciate and explore a challenging environment in the field of Environment and Safety that offers Professional growth & advancement opportunity while being resourceful, innovative and flexible

Process Engineering

Have all Oilfeild tickets

Seasonal Professional with nearly 9.3 years of experience in Construction, Erection & Project Management and Team Management with well known organizations. Demonstrative abilities in identifying potential, deconstructing complex situations and further conceiving and implementing streamlined solutio

Document Controller

Experienced gained in drilling engineering, heavy work-over operations, HPHT wells, deep water operations, well completion and testing, tendering, cost/contractor control, qa/qc, project management and conflict resolution. Holds a diploma in Mechanical engineering and final y B.TECH in petroleum

Fresher- engineer in maintenance and exploitation of oil and gas deposits.

Programming of Emerson DCS (Ovation),

MBA-Finance and done summer training in standard charted bank

Sales and marketing professional with a proven track record of achievement in leading and managing a seasoned, high performing, global sales team.

Multi-disciple project engineer covering, electrical, instrument, mechanical, piping work etc. Gas Turbine & High Voltage Power installation work. DCS work. Contract Management / Planning / Cost/ Commissioning, Training, Maintenance,. Vendor Inspection. Contract estimation work, QA/QC/QS.

Results oriented electronics technician. Background includes twelve years of experience in troubleshooting, assembling, installation, testing, upgrading, configuration, support, and maintenance of Audio, Video, Communication devices, Cellular phones, computer hardware and software.

A capable, enthusiastic civil engineer with 12 years experience on site construction specialize in horizontal and vertical construction, tunneling, viaduct, high speed railways, High rise buildings

Diploma of Associate Engineer in Civil Technology

All type of Light & Heavy Lifting & Transportaion job

diamond driller

Im a Mechanical engineering graduate. i have completed my undergraduation (B.E.) in india under Anna university and did my masters (MSc in Mechanical engineering) in UK at Staffordshire university. After that i came to india and joined as production manager in Sri venkateswara textiles.

Relatively young well test engineer/testing supervisor with 10 years hands-on experience in well testing. ex-service hands with direct knowledge of how things worked and troubleshooting. Good interpersonal skill and work hard.

Mining engineer with 4+ years experience.

Biomedical Engineer having skills to sortout the problems of electronics & mechanical. also able to work in the pressure.

I am a chinese,39 years old.I graduated from DALIAN MARITIME UNIVERSITY.I have 5 years experience on Oil Tanker as Junior Deck Officer and 10years on FPSO as DPO & Cargo Operator.I hold Chief Officer Certificate.

I have a proven ability to organize and lead members of a team, ability to bring fresh perspectives to a business and technical team, excellent verbal and written communication skills. I catch on quick. I am a multi tasker, and great under pressure. I believe in team work and will work as a team pla

Piping engineer

Total 4.2 years relevant work experience in the field of Piping Stress Analysis. • Diploma in Piping Engineering from Suvidya Institute of Technology. • B.E. in Production Engineering with First Class. • Diploma in Production Engineering with First Class.

I am a site manager currently financing myself through a BSc in construction management with the Reading University, having already completed various construction related college courses. I have been working in the U.A.E for the past 2.5 years managing a large workforce on mix use developments.

I have BSC in electrical engineering and now I am working in ethiopian electric power corporetion since june 16 - 2005 under protection and communication enginering

PROFILE: Filipino CPA and MBA with 15 years of experience in the fields of audit, finance and accounting

Experienced Landman/ROW Agent

Design, detailing, offer evaluation, TQs preparation, vendor drawing approval of the various static equipments like Pressure Vessels, Heat Exchangers, Columns, Reactors.

I finished in diploma in Architecture, master diploma in architecture cadd

Challenging and rewarding position in growth-oriented organization which offers diverse job responsibilities in vehicle maintenance and will fully utilize both my technical and managerial abilities.

Detail Engineering: P& ID review and Basic selection of Instruments from process description, Control Philosophy in co-ordination with Process Department, Engineering of distributed control system, Specifications for field instruments, Panel Instruments and control system.

Excellent negotiation skill,strong analytical skill,excellent client orientation skill.B.sc degree in banking and finance

I have over 12 years of experience in sales in the oil and gas industry. I have multiple certifications as you will notice in my resume.

4 years experience in Quantity Surveying, also exposed in construction management works.

First Prev 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 [ 134 ] 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 Next Last

Seach Parameters


Goto Advanced Search...
Keywords: (e.g. mining engineer)		Find results with:

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out