Resume - Senior PDS Designer

Misco Jobs

Resume #81074

CONTACT INFORMATION:
View contact information...

Summary: Over eight years experience in 3D model design, piping design, pipe support design and document preparation for engineering and construction companies.

Employment:
Washington Division of URS Corporation: Denver, CO
Title: Piping Designer IV (03/06-Present)
* Utilizing PDS along with P&IDs and other Engineering documents to generate PDS piping and equipment models for projects such as Syncrude Emissions Reduction, Pine Bluff Chemical Demilitarization, Exxon Mobil CO2 Sales, and Tennessee Valley Authority.
* Piping systems included Low/Medium Pressure Steam, Utility Air, Instrument Air, Boiled Feed Water, Condensate, Coke Fine, Glycol, Recycled Water, Potable Water, Lime Slurry, Ash, etc.
* Responsible for extracting and check isometrics before issuing for stress and for bid.
* Utilizing Smart Plant Model Review to visually check piping model and preform model reviews.
* Run interference report and scrub piping isometric after checking.
* Created 2D Piping Orthographic and 2D General Arrangement drawings.
* Providing support for the construction site. Answering any questions that may arise (RFIs).

Walsh Engineers: San Diego, CA
Title: Piping Designer (08/05-03/06)
* Working in the Power Resources Department (PRD) to design gas generated power plant.
* Responsible for create 2D and 3D construction documents from engineer, vender drawings, and P&ID using AutoCAD 2005-2006 and AutoDesk Building Systems.
* Responsible for designing ducts and piping along with designing supports for both.
* Required to take field measurements for additions to existing plants.

Bechtel National Inc: San Francisco, CA/Richland, WA
Title: Piping Designer (11/01-06/05)
* Prepared detailed piping design and equipment modeling using P&ID's, Engineering Documents, Project standards, and Vendor Drawings. Prepared General Arrangement for the Waste Treatment Plant and the Pueblo Chemical Agent-Destruction Pilot Project using PDS, Plant Space, TriForma, MicroStation 2D/3D, and Smart Plant Model Review software.
* Design 3D pipe supports utilizing Pelican Forge Pipe Support Modeler software with information from project support details or information provided by stress and creating new pipe supports if needed.
* Responsible for extracting isometrics and checking it against P&IDs before issuing for stress and construction.
* Responsible for changes and record keeping on 3-D model of plant.

Urban Data Solutions: Tewksbury, MA. (06/00-03/01)
Title: CAD Specialist
* Utilized Architectural Engineering Series software, along with multiple resources, to complete 3-D models of various U.S. cities.
* Responsible for completing logs for model build-out.
* Required to be fully involved in the decisions making processes during the modeling process.
* Responsible for the GIS evaluation process of each completed city. This evaluation process was completed primarily through ArcView 3.2.

Education:
Washington Division of URS Corporation: Denver, CO.
* Completed SPED Process Plant Layout and Piping Design training course.
* Viewed over 66 hours of Videos along with course tests.

Middlesex Community College: Bedford, MA. (09/97-05/00)
Degree: Associate in Science with CAD technology.
* Accrued 1,500 hours of course work and lab experience using technical software on microcomputers.
* Designed, drafted, and dimensioned with ASME Y14.5-1994 Geometric
Dimensioning and Tolerance Standards for mechanical assemblies and details using AutoCAD R14/2000, and Mechanical Desktop 4.0.
* Planned and drafted electronic schematics using the PowerLogic program.

Lowell High School: Lowell, MA. (10/94-05/97)
Diploma: General Academic with drafting technology courses.

* Other skills: Familiar with Microsoft Package, some HTML skills and Fluent in Vietnamese.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 5201 to 5250 of 15341)

Go to Search Parameters...

Brief Description

Field processing geophysicist experienced in marine OBC and streamer onboard data and navigation processing, UNIX systems use and administration, and small boat work.

An experienced civil and structural engineer. Strong background in steel & concrete structures and in marine engineering and hydraulic projects. Advanced Geotechnical knowledge. Design and supervision of construction.

Five Years (1/2003 : Until now ) as HSE Engineer, Supporting Health, Safety, Environmental Protection, Fire security and Training Requirements Relating to the Full Range for Offshore and Onshore Construction and Operational Activities of Oil and Gas Industry in Petroleum Company.

Reservoir and Production Engineer

Senior Mechanical / Piping / Materials Handling / Pneumatic Design Specialist, Checker, Design Supervisor, Project Manager or Consultant

I have Thirty (30) years of experience in the surveying field, to include Boundary surveying,

Piping Layout,Equipment Layout,Nozzle Orientation,Vendor Drawing commenting,PDS,Microstation,GAD Extraction,Isometric extraction,Piping & Rack StudyClash resolving,Smart Plant Review

hard worker, analystic person,web management skills

MORE THAN 5 YEARS EXP AS A SAFETY OFFICER IN OIL & GAS CONSTRUCRTION PROJECTS BOTH IN ONSHORE & OFFSHORE

I have worked as development geologist, geophysicist and production geologist. I have worked with seismic data, well log correlation and interpretation; creating and interpreting pressure, GOR, rock properties maps; well interaction analysis.

IAM HAVING THE VERY GOOG ANALYTICAL SKILLS TO SOLVE THE PROBLEM

I am a supervisor of 6. fork lift; quality control. vendor contact, scanner; case packer operator, harper operator; shipping and receiving

Reliability Engineer

nior Software Engineer, Ascendum Solutions Pvt Ltd, Bangalore, India Dec 2007 - Present * Member of the ATG development team in the educational software development

11 years of NDT experience in the Middle East

Project Controls - Cost/planner scheduler - Desire Rotation Schedule - Currently at Alpine, North Slope Alaska. Willing to learn additional Skills.

Instrument Design Engineer; Instrument Site Supervisor c. PMT Instrument Field Engineer

Sizing process systems, Conceptual Design on projects : carrying out engineering studies at initiation, feasibility studies & concept selection,Process simulation & datasheet preparation ,Knowledge of Design Reviews and HAZOP studies,Preparation of PFD’s and P & ID’s,(B.Tech in Chemical Engineering)

Internship experienced geologist seeking full time position

CSWIP 3.1 certificate # 25917/2 ,TWI, U.K

Piping engineer

I have nearly 5.5 years experience in piping material engineering pertaining to petrochemical projects with renowned EPC contractors. During this time I have been responsible for various piping material related activities like piping class preparation, TBE, vendor drawing review.

Project Controls Analyst/ Scheduler with EVMS experience

Project Engineer

qa/qc inspector (welding or piping inspector)

wireline specialist and downhole gauges engineer

Chartered electrical engineer experienced in Instruemntation filed. Trained in QMS ISO Lead auditor course.

Mech Engineer, 10 years EPC experience in packages for oil & gas; gas dehydration, stabilization, water, effluent, pumps, utility equipment

Safety Officer with more than eight years of experience and presently working in Saudi Arabia with Saudi ARAMCO projects.

Excellent Engineer, with great oil & gas field experience. good management skills and communication. big experience of down stream and upstream.

Graduate Quantity Surveyor/Estimator, 10 Years Experience with B.Sc., AAIQS, ICIOB and MA Cost E.

Facility Engineer for oil and gas

Emergency response advisor and fire training instructor, a multi diciplined fire fighter with 25 years of actual expericnce.

Sheet Metal /Insulation Supervisor

Experienced EHS professional seeking leadership position in the management of environmental risk and occupational safety at the corporate or facility level.

Graduate in Electrical Engineering, with 14 year experience, of which 6 years in Refinery/Gas plant. Familiar with all maintenance & construction activities.

Very good exposure to conceptualisation, business developement, sales, erection, installation, commissioning and O&M of Lean burn Gasengines/ Diesel engines

Environmental Coordinator, experienced in: annual reporting, auditing, Title V permiting, SWPPP, SPCC, environmental program development, environmental training development, and project managment.

Self motivated, work under pressure, persistent, ambitious, capable of working in a team and lead.

Senior PDS Designer

Master in Chemical Engineering, 3 year experience as mud engineer

Highly competent, result oriented Drilling Engineer with three years of extensive experience in drilling optimization of horizontal, directional and extended reach wells. Demonstrated skill as a successful team leader and team player. Masters in Petroleum Engineering from University of Oklahoma.

I have about 12 years of Industry and ERP experience with 5+ years of extensive SAP FI/CO/PS. My experience in FI/CO and PS encompasses 9 projects. 3 of these projects were full life cycle implementations which went from Blue Printing to Realization and Go Live.

Canadian Sr. Control Systems Engineer (process control). PLC/DCS programming. I &C Design.

Exploration Geophysicist

SAP BW/BI Techno-Functional COnsultant

Mechanical Engineer - Static Equipment (Design & Detailed Engineering of Pressure Vessels, Columns, Column Internals, Heat Exchangers & Storage Tanks based on various Design Codes & Standards.)

Piping designer /supervisor , PDS designer

Instrument and Control Engineer

More than 11.10 (8.10 years in Saudi Arabia, 5 months in Qatar, 1.7 years in Abu Dhabi UAE & 1 year in India) years of extensive experience in Quality Assurance and Quality Control in Oil, Gas & Petrochemical Projects, Acetic Acid Project, Ammonia Urea Expansion Project and Power Plants involving En

First Prev 101 102 103 104 [ 105 ] 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 Next Last

Seach Parameters


Goto Advanced Search...
Keywords: (e.g. mining engineer)		Find results with:

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out