Resume - Presently I am working in Wade Adams Dubai As a Health&Safety Officer

Misco Jobs

Resume #81260

CONTACT INFORMATION:
View contact information...

Experience: 5 Yrs
Post: HEALTH&SAFETY OFFICER

OBJECTIVE
To seek a challenging position of strategic importance, by making contributions to the organization, by best of my abilities and developing my own skills during interaction. My Motto in life is "Problems are opportunities and never accept defeat in life".

WORK EXPERIENCE (Total Experience: around 5 years):

1) Currently Working as a "Health&Safety Officer" in "Wade Adams Contracting LLC. Dubai (UAE)" From 20th November 2007 to till date.

2) Worked as a "Health&Safety Officer" in "USHA MARTINE LIMITED.
Jharkhand (India)"since 25th Aug 2004 to till 4th November 2007.

Strenths:-

* Develop, monitor and evaluate occupational health, safety and environment plans/programs for the project activities to ensure compliance with applicable regulation, client requirement and international best practices; evaluate, modify and implement alternative methods for achieving desired goals.
* Provide technical support in annual audits and periodic evaluation of work environment as per requirement of OHSAS 18001:1999, ISO 14001:2004 & ISO 9001-2000.
* Management of subcontractor, vendors and supplier with respect to HSE issues.
* Reviewing subcontractor documents for assessing their HSE capability.
* Coordinate and supervise assigned programs including but not limited to occupational safety and hygiene, fire safety, radiation safety environmental issues etc.
* Serve as technical consultant to faculty in health safety & environment management issues and liaisoning with client, consultant and other agencies in HSE issues.
* Ensure and document company's compliance with mandatory HSE requirements and bring to management's attention areas of deficiency Develop and implement HSE training and educational programs, safety meeting, workshops etc.
* Assists top management in planning and setting goals for effective control over occupational hazards, loss management etc.
* Doing Risk assessment, identification and locating hazards, recommendation of corrective and preventive measures, Hazard and Effect Management Plan (HEMP).
* Preparing and implementing Contingency Plan (Fire, Spill etc), conducting Mock drill (Dry and Wet)
* Accident / Incident investigation and analysis, recommendation of corrective and preventive measures.
* Safety Presentation, Reports to Management, HSE Statistics and analysis of data.
* Safety Walk about, inspection of workplace and facilities, safety survey.
* Safety Performance monitoring and appraisal of employees.
* Environmental inspection, audit and waste management.

Summary: 5 years of Experience in Construction Field as Health&Safety Officer.

1) Organization: Wade Adams Contracting LLC, Dubai
EXPERIENCE: Currently working as "Health&Safety Officer"
from 20th November 2007 to till date.
Project Details:

Sir Baniyas Hotel Development Internal & External Work(Abudhabi)

Client: - Tourism Development Investment Company(TDIC)
Project management Team: - i) Leighton Asia Contracting LLC
ii) Turner & Tounsend(T&T)

Consultant: - NORR

Mirdiff Villas & Building (Roads & Infrastructure works)(Dubai)

Client: - Dubai Properties
Project Management Team: - Mace International
Consultant: - Cansult Maunsel /AECOM

Duties: -

ƒæ Provides safety information, support and mentorship to operation personnel and other internal clients to ensure the conduct of safe and hygienic work practices.

ƒæ To comply work the safety law, norms and standards.
ƒæ To collect and maintain data information regarding frequency and severity of accident.

ƒæ To formulate suitable safety policies and programmers.

ƒæ Prepare HSE Objectives and Programe for project specific Identify Competence

ƒæ To report regularly on safety performance as well as accident trends.

ƒæ To ensure that personal protective equipments are in working conditions and being use by workers in hazardous situations.

ƒæ Assists with development and implementation of safe operating and emergency procedures, manuals bulletins and other safety publications.

ƒæ Takes an active role in the development and implementation of the permit to work system and provides independent oversight by reviewing selected permits issued by operations personnel's.

ƒæ Assist with the development and conduct of safety training course.

ƒæ To include the spirit of safety among workers by launching safety campaigns in the form of observing safety weeks and through other audio-visual aids including arranging contests, talks and seminar on safety.

ƒæ To coordinate and motivate the safety educational and training programmers among workers.

ƒæ Conducts regular facility safety inspections of operating plant and equipment as well as new projects/ modification under construction, prior to mechanical acceptance start up.

ƒæ Participates in audits of safety program implementation.

ƒæ Participates in incident control during accident or emergencies.

ƒæ Leads and participates in incident investigations, including near misses property damage, injuries, occupational illness and spills/ loss of containment

ƒæ Assists with the development and maintenance of computer based incident records keeping system.

ƒæ Ensure that safety equipment and facilities are kept in best working condition by developing and implementing equipment inspection, and preventive maintenance program, setting up efficient record keeping systems of all equipments under his responsibilities and recommend the replacements of faulty equipments.

ƒæ Participates in safety reviews as required.

ƒæ Includes Hazop, what if, case and effects reviews

ƒæ To identify hazardous zones in the work places with suitable demarcation of such zones.

ƒæ Assists with industrial hygiene survey to identify and quantify occupational workplace stresses.

ƒæ Keep abreast if new developments safe working practices, government regulations and relevant international codes of practice.

ƒæ Participates in local industry associations committees or work group and liaises with counterparts at other to facilities identify areas where the company might benefit by adopting best practices.

2) Organization: USHA MARTINE LIMITED, Jharkhand

EXPERIENCE: Worked as a "Health&Safety Officer" Since 25th Aug 2004 to till
4th November 2007.

Trainings in: -
* Fire Fighting
* Confined Space
* Lock Out/ Tag Out
* Excavation
* First Aid Training

EDUCATIONAL QUALIFICATIONS

Name of Exam Board/University Year of passing Division
Matriculation B.S.E.B., Patna 1999 2nd Div
Diploma in Mechanical Engineering Ranchi University(Jharkhand) 2003 1st Class
Diploma in Safety Engineering University of Newcastle(Dubai) 2008 1st class
TECHNICAL SKILLS:
Successfully Completed One Year Diploma In Industrial Safety Management From Rashtrya Technical Institute (RTI) In The Year Of 2004.

Computer Skill: Windows 98/2000/XP/Vista, Auto CAD 2006,
MS Word,MS Excel, Ms PowerPoint

PERSONAL DETAILS: -
Date of Birth: 4th Jan 1984
Marital Status: Unmarried
Religion: Islam
Gender: Male
Language Proficiency: Hindi, English, Urdu
Hobbies: Travelling, Playing Cricket &
Making new friends.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 7801 to 7850 of 15497)

Go to Search Parameters...

Brief Description

A young graduate who is capable of performing roles with little supervision. A very determined practical person, with the ability to learn new things. I enjoy and work well as part of a team, yet equally at ease working on his initiative

I’m Petroleum Engineer. I have Bachelors degree in Petroleum Engineering. From the beginning of year 2008. until now I work as Pipeline Engineer in company SAIPEM ( member of ENI group).

Mechanical Engineer, Project Manager

I am working as a planning Engineer. I am B.E- Civil Engineer graduate. 2.5 years of experience in construction field. Extensive knowledge in PRIMAVERA P3. Experience in Planning Division •Good knowledge in MS Office

A highly talented designer in the area of pipe for petrochemical complex. Using the information supplied by engineers and equipment vendors. Experience to work on P&ID's, vessel structural detailing, GA's, isometric piping, 3D structure design.

Senior Estimation Engineer for oil and gas construction projects

Experienced Supply Chain and Strategic Sourcing Specialist with Big 4 Consulting firm

I have over 9 years of experience working in the major international oil and gas projects participating in the activities at the different phases of a project. The areas of my expertise are: Maintenance activities support, Implementation of maintenance data base in CMMS

Experienced with Microsost Office, ie Excel, Word, PP, Access.

PRODUCTION SHIFT INCHARGE.DRILLING INCHARGE.PP MODULE,PRODUCTION &DRILLING PLANNING .B.Sc in mining engineering(4 years),present time in ACC HOLCIM chaibasa cement works

25+ years Upstream Project Controls Management across all stages of Oil & Gas E&P Business Process Life Cycle:

Over 8 years of experience both as a QA Inspector and QC Inspector in Welding and NDT Inspection in different Sectors of Engineering & Construction like LNG tanks, LPG Spheres, Chemical plants, Power Plants, Fertilizers Manufacturing Industries, Refineries, Shipyards, FPSO Conversion projects, Oil R

PDMS,Auto Cad,Hypermesh,

Cementing Engineer, Technical Professional

trackless fitter

Presently I am working in Wade Adams Dubai As a Health&Safety Officer

I am currently a process operator at Hovensa LLC, a 495,000 bpd refinery, located in the U.S.V.I. I am certified to operate both crude and vacuum units and am training to certify on an amine reclaimation unit. Job skills and responsibilities are listed on attached resume.

M.E. Civil in Transportation Engineer with I-Class

Chemical Engineer from Venezuela with unfinished MSc, FLAIR Operator in Geoservices, marketing research experience on Plastic Industries, Reservoir Simulation experience from PDVSA-INTEVEP. Interested to work worldwide, specially Australia.

Passed out Diploma in Instrument Engineering through NATIONAL POLYTECHNIC from July’ 1993 to May’ 1995

I am a QA/QC Engineer with over 8 years experiences currently work in Saudi Arabia as a Senior QA/QC Engineer ( QC Supervisor ARAMCO SAP No. 70009461 in GAS Plant ( 3 Sulfur recovery units and 3 Gas Sweetening Units...) Kindly check the attached CV for all details.

25 years experience. Plant Manager and Area Production manager.

Preparing quantity schedules and bills of materials managing project costs and performing cost analysis. Managing different project quantities related to the implementation of the project such as, materials, equipment and resources. Forecasting project quantities and ensuring that construction costs

Directional Driller 7 yrs Exp.

B.sc(Hons) chemical engineering with 7 yrs Experience in Drilling Fluids Technology

Material Engineer (Cathodic protection, corrosion, coating and painting)

20+ years in the gold mining & milling industry, multifaceted processing career including start UPS, operations, supervision and training.

Piping designer with 10 years experience of Oil & Gas, Petrochemical & Manufacturing industry.

Familiar work with computer office and internet

Electrical, Instrument, Electronics Engineering 20+ years

Heavy equipment operator over 20+, Body Work and Custom Paint 20+ and Welder 10+

Environmental Scientist/Geologist seeking entry level employment within the United States

Working as: Heath Safety and Environmental Engineer for Snamprogetti S.A. Ltd At Saudi Aramco

I have 12 years experiance as a Gold Room Refinery Operator.

ELECTRICAL & ELECTRONIC ENGINEER/SAFETY OFFICER

I am a graduate of Geology from Olabisi Onabanjo University,Nigeria.I have my Master's in poetroleum Geology/Sedimentology from the University of Ibadan.I am proficient in the use of Microsoft office Suite.

5 years working experience as Draughtsman in construction, Oil and Gas indutry and steel fabrication.

HND Elect/Elect. Engineering[Telecommunication option].

Most of my experience includes researching abstract and running title in Texas and Louisiana. My experience also includes working as both a mineral agent and perimit agent for 3-D seismic. I have 3 yrs total experience in the business. Most recently I worked doing field due diligence in Louisiana.

Attended a workshop on Modern Well Log Data Interpretation from 25th to 30th February-2008 • Exposed to different well logging tools at Schlumberger Company, Mumbai, in Feb-2008 • An overview of seismic data processing and Interpretation in SPIC, ONGC Ltd., Nov-2007 • Observation of different Stru

To ensure the safe utilizing of assigned equipments by assigned subordinates, resources, competencies and skill to meet daily planned productions targets.

Ballast Control Operator , Watchstander , Barge Engineer

MBA Finance. Procurement & Supply Chain expert with over 14 years of experience and a strong knowledge of inventory, logistics, imports and exports. Proven capabilities in project management, business analysis, problem solving and negotiating. Fluent in English & Spanish.

My background is Drilling Engineer and I have a first experience as drilling supervisor, so I want to build my career in the world of drilling.

Able to prepare welding procedure/ welder qualifications, organize for hydostatic test and witness the same, prepare the final dossier for the project and submit to the commissioning team. Diploma in electrical and electronics engg, AWS Ceertified welding inspector and Level II in RI, MT,PT

Nine years of mechanical engineering experience: One year working as client mechanical/facilities lead engineer on major offshore FEED BOD. Two years providing engineering, procurement and construction management services to onshore oil & gas producers and pipeline transportation companies.

Working as senior telecommunications technician for a big gas company.

Qualification is Diploma in Mining Engineering and having surveyor certificate under indian mine act 1952, having your required experience is 15 years remaining details are given in resume.

Implementation Manager or Technical Project Manager

Interprets plans, conducting quality control as inspector, preparing welding procedures as a welding engineer, and controlling/monitoring project activities/ preparing documents for the fabrication of boiler components shall hopefully contribute to your requirements.

First Prev 151 152 153 154 155 156 [ 157 ] 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 Next Last

Seach Parameters


Goto Advanced Search...
Keywords: (e.g. mining engineer)		Find results with:

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out