Resume - Planning of all the activities of Major and Minor inspection of conventional ste...

Misco Jobs

Resume #81360

CONTACT INFORMATION:
View contact information...

Objective
Require to obtain a challenging position as a Maintenance Engineer in power generation where I can utilize my extensive experience and skills effectively in a reputed organization with a healthy working environment which enables a clear objective, development and appreciate quality work.

Highlights of Qualifications
* 14 years experience as a Maintenance Engineer
* Highly skilled in repairs and troubleshooting of various equipments associated with large fossil fuel fired thermal power stations.
* Highly skilled in planning projects and ensuring targets and budgets are met on time.
* Good skill in Ms. Office and Internet Browsing; Knowledge of computerized planning Maintenance system (Maximo and Orion).
* Professional work ethic and good team leader.

Employment Skills & Experience
Maintenance and Troubleshooting
* Complete and partial overhauling of 210 Mw TCDF, Hitachi steam turbine, 75 Mw Franco Toshi and 68 Mw pass out Steam turbines.
* Inspection, periodical maintenance and overhauling of Boiler feed pumps having capacity up to 400 tons/hr at 150 bars, Condensate extraction pumps, large capacity Mixed flow pumps and rotary water sealed vacuum pumps.
* Inspection, periodical maintenance and overhauling of double acting two stage, Vee block instrument and service air compressors.
* Tube leak detection and consequent repair in HP heaters, LP heaters, Condenser and auxiliary coolers etc.
* Routine and shutdown maintenance of 680-tons/hr Water tube Boilers and their auxiliaries.
* Inspection of boiler drum internals and repair, soot blowing system, forced draft fans, gas recirculation fans, boiler firing equipment and setting and safety valves floating checks of drum and super heater safety valves and Electromagnetic relief valves.
* Review of failure reports in Maximo, analyze the requested jobs, identify priorities, allocate work to subordinates and follow up execution.
* Review of the progress of defect correction, breakdown maintenance and lubrication work. Analyze the observations during these works and plan subsequent action.
* Report to / discuss with Concerned Manager on rescheduling of work or plant shut downs for planned and emergency corrective action.
* Analyze data obtained from defects correction, breakdown maintenance, check the type of failure and plan action in consultation with Concerned Manager.
* Coordinate with other departments as required in executing the defect correction and arrangement of support services from other agencies.
* Procurement planning and follow up action in coordination with purchase department regarding general consumables, spares and proprietary items from OEM.
* Strategic Planning for the procurement of necessary spares for next 5 years according to RLA (Residual Life Assessment) of plant equipment.
* Preparation of overhauling reports, defect root cause analysis reports and ensure safety disposal of general and hazardous waste and local municipality procedures and laws.
* Conduct tool box talk for all the activities before proceedings, assessment of safety risk involved and ensure related safety measures.
* Preparation of Risk Assessment of all the maintenance activities and review of these reports annually or after an accident.
Operations Activities
* Provide technical assistance to the owner in all corporate agreements including OMA, PPA and FSA
* Update the routine database and analyzing the trends including the performance trend, load forecasting and fuel consumption & ordering.
* Coordinate and support maintenance and performance department of O&M contractor for measures to be taken for improving plant performance.
* Review of plant systems betterment proposals/modifications submitted by O&M contractor for improving safety, reliability and availability of the plant.

Planning /Organizational Skills
* Planning of all the activities of Major and Minor inspection of conventional steam turbine of various capacities from shut down to start up and over speed testing.
* Planning, scheduling, supervision and execution of rehabilitation work Re heater Coils of unit # 1 & 2 and Ljungstrom Air Pre heater of unit # 1 at Bin Qasim Power Station (210x6 Mw) in supervision of Babcock Hitachi and ABB experts according to the specified procedures and standards provided by the manufacture.
* Planning, scheduling and execution of chemical cleaning of 680 t/hrs capacity boilers in supervision of M/s Halliburton Ltd.
* Associated with NESPAK Consulting Engineers for the erection and commissioning of Bin Qasim Thermal Power Station Ext. # 6 project, as Owner's Representative.
* Planning, scheduling and supervision of erection and commissioning activities of 210 Mw steam turbine, 680 tons/hr steam generator and their auxiliary equipments.

Employment History

Engineer Mechanical Maintenance 2005- To date
Dubai Water and Electricity Authority
Assistant Manager Operations 2005-2005
The Hub Power Company Ltd
Maintenance Engineer Mechanical 1992-2004
Karachi Electric Supply Corporation
Mechanical Engineer 1989-1991
Mohammad Din Containers (Manufacturers of Aluminum Collapsible Tubes)

Education and Training
Bachelor in Mechanical Engineering 1988
N.E.D University of Engg & Tech Karachi, Pakistan.
One year Apprentice ship Training in Mechanical Maintenance (Assistant Engineer) 1991-1992
Karachi Electric Supply Corporation at 210x6 Mw Bin Qasim Power Station.
Turbine, Generator and Auxiliaries, operation & maintenance and control system. 1997
Hitachi Works for Bin Qasim Power Station Ext#6.
Certificate of Completion (Familiarization Program) 1998
Black and Veatch International at Bin Qasim Power Station Ext#6.
Process Safety Management 2005
The Environmental Management Consultant; Karachi, Pakistan
Risk Assessment Training from Occupational Health & Safety Section 2007
Dubai Water and Electricity Authority, Dubai.
High Performance Leadership and Team Building 2008
By Dr. Mahmood Khan (TLPE, ICT International/ TEXPO)
First Aid Certificate for Appointed Person
From First Security Group Health & Safety Division, Dubai 2008

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1401 to 1450 of 15434)

Go to Search Parameters...

Brief Description

I am a Kentucky certified miner, mine foreman, electrician and electrical instructor.

Currently I am Mechanical Technician in the oilfields in Sudan also have many years of experience as maintenance supervisor.

Electroplating and running chemical an run test on them and check qc on parts

PDMS Structural Designer Offshore Experience

CFS-CV

NDT level III, Senior certified welding inspector, experienced in most industries

I am a traveling supt. looking for someone to utilize my skills. I am an excellent problem solver and work well under pressure.

I worked in Aker Shipyards Braila in Hull Design Department as ship designer. I was involved in several projects on making of hull structure drawings, workshop drawings, lines faring for different types of maritime vessels built in shipyards: cargo vessels, supply vessels, RO-RO, container vessels,

Free! 20 years experience in Control Systems design and drafting. Industries include: Refining, Petrochemicals, Pharmaceuticals, and Brewery. Working knowledge of AutoCad MicroStation, Microsoft Excel & Access, PDS modeling, SmartPlant P&ID, SmartPlant Instrumentation (INtools) and SmartPlant 3D.

Hungarian chief rig mechanic with 30 years experience

Dynamic, energetic, results oriented, Geologist/Technologist with extensive supervisory and field experience seeks a technical/management position in a progressive thinking mineral resources organization.

My career objective is to become an integral part of a team involved in oil and gas exploration where I can use my problem solving skills and creative abilities to meet challenges and contribute to a dynamic organization.

Results oriented engineering professional with 20 years experience in project management, process engineering, and facility engineering

Experienced Materials coordinator

HSE manager . qualfication . diploma of HSE engineer , osha qualified

A diversified and experienced individual seeking opportunity in mechanical engineering / management support or related field.

Planning of all the activities of Major and Minor inspection of conventional steam turbine of various capacities from shut down to start up and over speed testing.

development of process flow diagram (PFD) and P&IDs, equipment sizing & preparation of datasheet, heat and material balance, simulation on HYSYS, process improvement, Hazop Reviews, line hydraulics, debottleknecking to improve plant performance, commissioning and pre-commissioning activities.

Honest, hard working, tenacious employee

Experienced Manager, and an effective leader with excellent interpersonal skills and flair for creativity, with the ability to work to strict deadlines. Adaptable, good sense of humour that enjoys a challenge and enhancing peoples potential using communication skills at all levels.

Fabrication , construction , in-service inspection , repair, alteration and rating activities for pressure vessels , pressure relieving devices , steel storage tanks built to API 510, ASME section VIII div 1,

Over 13 yrs exp in OD/HR/OB engagements, executive coaching/mentoring, leadership development. currently working as Principal consultant with Infosys leadership system, Infosys tech ltd (Nasdaq:INFY).

B.E.-Chemical with 9 years of Commissioning and Operation Experience in Ammonia Plants; 6 years of Project Management experience & 4 years of Process Engineering experience in Fertiliser Project

Directing Large Engineering Teams.

PLAN SUPERINTENDENT,PLANT MANAGER.SHUTDOWN MANAGER,MAINTENANCESUPRINTENDENT.TECHNICAL CONSULTANT.COMMISSIONG ENGINEER

VERY GOOD EXPERIENCED IN CIVIL ENGINEERING AND CONSTRUCTION PROJECTS SUCH AS CONSTRUCTION OF BUILDINGS, ROADS, HOUSES AND HOSPITALS.

Highly experienced in project engineering management

I have experiences in Oil and Gas International Company in Exploration, Development and Cross Function Team Departments for 26 years in Indonesia with the latest position is Geoscience Analyst. I am expert on DAta base Administrator for Well dar, seismic and petrolog data

Document Controller,Scheduler (Primavera P3), Programmer (FoxPro), Administrative Assistant

Project Management Professional - 16Years of Experience (including overseas) in..,

Diploma In Civil Structural Engineering, Designer, Detail Engineering, FEED,Oil and Gas, EPC, PDMS, PDMS DRAFT, ACAD, Microstation, Review Reality, Terramodel, Windows (MS word, MS Excel & MS PowerPoint) on Windows NT & 2000 Novell environment

16 years extensive experience in the field of Health, Safety and Environment (HSE) in multi-discipline heavy construction projects covering site management, planning, training and developing all aspects of accident prevention. Manage HSE program while ensuring compliance with all government reg

Instrumentation, Qualification: ITI& Diploma Instrument & control

Passed in diploma instrument & conrtol skills in dcs system and manage/conrol our staff

Core Negotiator & Timely & Quality Conscious Buyer

Casing Vibration monitoring and spectrum analysis of Rotating equipment by using data collector & analyzer (SKF Microlog CMVA60) and data manager (SKF PRISM4 1.35 / SKF Machine Analyst 2.2)

Process Engineer with 19 years experience on which 12 years of Project Engineering, and Commissioning in international team environment.

Lead the Project in Oil and Gas in different companies namely CB &I, Ajman, Maersk Oil Qatar, Kvaerner Powergas Mumbai, Tecnimont ICB Mumbai etc.

Over Eleven (11) years of extensive experiences in the field of Planning/Scheduling Engineer of various projects. Similar to Oil & Gas Refinery, Chemical Plant, Oil & Gas Exploration & Production Onshore/Offshore, Power Plant, Transmission Line and Desalination Plant in Russia, Vietnam, Kuwait, Ch

I am a railway track engineer past 25 years in INDIA, MALAYSIA,DUBAI METRO PROJECT.

A reliable, enthusiastic administrative assistant with diverse experience, a strong work ethic and excellent attitude. Personable, diplomatic, flexible and adaptable team-player. Professional deportment and discrete. Self-motivated and willing to learn.

ASNT NDT LEVEL-III +CSWP+ISO LA+RSO

Extensive Operation experience in different petrochemical industries.

OSHA 30 - WCS Well Control School

Sr. Electrical Designer with AutoCAD background & some Microstation experience.

I am an experienced and qualified supervisor/manager with long term knowledge of the Manufacturing of construction Materials.

Worked in the oilfield for 28 years a very dedicated person and reliable,truthful, teamplayer, think safety.

A result oriented professional with 11 years experience of quality control, Quality inspection Management,NDT-inspection and CAWI-certificate holder

26 years of mechanic/welding background, Certified welder, 21 years Army SFC/E-7 retired

Security Manger with hands on experience

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 [ 29 ] 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Goto Advanced Search...
Keywords: (e.g. mining engineer)		Find results with:

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out